On flow table creation, send the relevant flags according to what the FW
currently supports.
When FW doesn't support reformat option over SW-steering managed table,
the driver shouldn't pass this.

Fixes: 988fd6b3 ("net/mlx5: DR, Pass table flags at creation to lower layer")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The pool sizes represent the pool sizes in the fw. when we request
a pool size from fw, it will return the next possible group.
We track how many pools the fw has left and start requesting groups
from the big to the small.
When we start request 4k group, which doesn't exists in fw, fw
wants to allocate the next possible size, 64k, but will fail since
its exhausted. The correct smallest pool size in fw is 128 and not 4k.

Fixes: 39ac237c ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

There is no need to reset all vf config (except link state) between
legacy and switchdev modes changes.
Also, set link state to AUTO, when legacy enabled.

Fixes: 3b83b6c2 ("net/mlx5e: Clear VF config when switching modes")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Set vport gvmi in the tag, only when source gvmi is set in the bit mask.

Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When health reporters are not supported, recovery function is invoked
directly, not via devlink health reporters.

In this direct flow, the recover function input parameter was passed
incorrectly and is causing a kernel oops. This patch is fixing the input
parameter.

Following call trace is observed on rx error health reporting.

Internal error: Oops: 96000007 [#1] PREEMPT SMP
Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703)
Call trace:
mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core]
mlx5e_health_report+0x60/0x6c [mlx5_core]
mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core]
mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core]
process_one_work+0x168/0x3d0
worker_thread+0x58/0x3d0
kthread+0x108/0x134

Fixes: c50de4af ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Initialize RQ doorbell counters to zero prior to moving an RQ from RST
to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor
ID on the completion is reset. The doorbell record must comply.

Fixes: 8276ea13 ("net/mlx5e: Report and recover from CQE with error on RQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa
cannot take mutex lock. Two possible issues can happen:
1. User at the same time change vepa mode via RTM_SETLINK command.
2. User at the same time change the switchdev mode via devlink netlink
interface.

Case 1 cannot happen because rtnl executes one message in order.
Case 2 can happen but we do not expect user to change the switchdev mode
when changing vepa. Even if a user does it, so he will read a value
which is no longer valid.

Fixes: 8da202b2 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit ba27b4cd

Ahmed reported ouf-of-order issues bisected to commit ba27b4cd
("net: dev: introduce support for sch BYPASS for lockless qdisc").
I can't find any working solution other than a plain revert.

This will introduce some minor performance regressions for
pfifo_fast qdisc. I plan to address them in net-next with more
indirect call wrapper boilerplate for qdiscs.
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: ba27b4cd ("net: dev: introduce support for sch BYPASS for lockless qdisc")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dan Carpenter reports static checker warnings due to bogus BIT() usage:

net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number
net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number
net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number
[..]

This is harmless (we use bits 1 & 2 instead of 0 and 1), but would
break eventually when adding BIT(5) (or 6, depends on size of 'long').

Just use 0 and 1, the values are only passed to test/set/clear_bit
functions.

Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an event is added while the rdma workqueue is being destroyed
it could lead to several races, list corruption, null pointer
dereference during queue_work or init_queue.
This fixes the race between the two flows which can occur during
shutdown.

A kref object and a completion object are added to the rdma_dev
structure, these are initialized before the workqueue is created.
The refcnt is used to indicate work is being added to the
workqueue and ensures the cleanup flow won't start while we're in
the middle of adding the event.
Once the work is added, the refcnt is decreased and the cleanup flow
is safe to run.

Fixes: cee9fbd8 ("qede: Add qedr framework")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reserved member should be named reserved3.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When T2 timer is to be stopped, the asoc should also be deleted,
otherwise, there will be no chance to call sctp_association_free
and the asoc could last in memory forever.

However, in sctp_sf_shutdown_sent_abort(), after adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the
format error from __sctp_sf_do_9_1_abort() and miss adding
SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.

This patch is to fix it by moving the format error check out of
__sctp_sf_do_9_1_abort(), and do it before adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer.

Thanks Hangbin for reporting this issue by the fuzz testing.

v1->v2:
  - improve the comment in the code as Marcelo's suggestion.

Fixes: 96ca468b ("sctp: check invalid value of length parameter in error cause")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tc flower rules that are based on src or dst port blocking are sometimes
ineffective due to uninitialized stack data. __skb_flow_dissect() extracts
ports from the skb for tc flower to match against. However, the port
dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in
key_control->flags. All callers of __skb_flow_dissect(), zero-out the
key_control field except for fl_classify() as used by the flower
classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to
__skb_flow_dissect(), since key_control is allocated on the stack
and may not be initialized.

Since key_basic and key_control are present for all flow keys, let's
make sure they are initialized.

Fixes: 62230715 ("flow_dissector: do not dissect l4 ports for fragments")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted
by reading chuncks of 4 bytes from a register.

In case the IFH and frames were read corretly it would try to read the next
frame. In case there are no more frames in the queue, it checks if there
were any previous errors and in that case clear the queue. But this check
will always succeed also when there are no errors. Because when extracting
the IFH the error is checked against 4(number of bytes read) and then the
error is set only if the extraction of the frame failed. So in a happy case
where there are no errors the err variable is still 4. So it could be
a case where after the check that there are no more frames in the queue, a
frame will arrive in the queue but because the error is not reseted, it
would try to flush the queue. So the frame will be lost.

The fix consist in resetting the error after reading the IFH.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The call to of_get_mac_address() can return -EPROBE_DEFER, for instance
when the MAC address is read from a NVMEM driver that did not probe yet.

Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix all kernel-doc warnings in <linux/skbuff.h>.
Fixes these warnings:

../include/linux/skbuff.h:890: warning: Function parameter or member 'list' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove stale comments since this flag is no longer a bit mask
but is a bit field.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix all kernel-doc warnings for <net/sock.h>.
Fixes these warnings:

../include/net/sock.h:232: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'

../include/net/sock.h:498: warning: Function parameter or member 'sk_rx_skb_cache' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_tx_skb_cache' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_bpf_storage' not described in 'sock'

../include/net/sock.h:2024: warning: No description found for return value of 'sk_wmem_alloc_get'
../include/net/sock.h:2035: warning: No description found for return value of 'sk_rmem_alloc_get'
../include/net/sock.h:2046: warning: No description found for return value of 'sk_has_allocations'
../include/net/sock.h:2082: warning: No description found for return value of 'skwq_has_sleeper'
../include/net/sock.h:2244: warning: No description found for return value of 'sk_page_frag'
../include/net/sock.h:2444: warning: Function parameter or member 'tcp_rx_skb_cache_key' not described in 'DECLARE_STATIC_KEY_FALSE'
../include/net/sock.h:2444: warning: Excess function parameter 'sk' description in 'DECLARE_STATIC_KEY_FALSE'
../include/net/sock.h:2444: warning: Excess function parameter 'skb' description in 'DECLARE_STATIC_KEY_FALSE'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that
BE[3:0] signals are active high. This contradicts the measurements
of the behavior of the actual chip, where these signals behave as
active low. For example, to read the CIDER register, the bus must
expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The packet data written to and read from Micrel KSZ8851-16MLLI must be
byte-swapped in 16-bit mode, add this byte-swapping.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown,
however the speculation is that this was some sort of attempt to support
the 8-bit bus mode.

As per the KS8851-16MLL documentation, all two registers accessed via the
8-bit accessors are internally 16-bit registers, so reading them using
16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read
outright, as it is already a concatenation of two 8-bit reads of that
register. The KS_RXQCR accesses are 8-bit only, however writing the top
8 bits of the register is OK as well, since the driver caches the entire
16-bit register value anyway.

Finally, the driver is not used by any hardware in the kernel right now.
The only hardware available to me is one with 16-bit bus, so I have no
way to test the 8-bit bus mode, however it is unlikely this ever really
worked anyway. If the 8-bit bus mode is ever required, it can be easily
added by adjusting the 16-bit accessors to do 2 consecutive accesses,
which is how this should have been done from the beginning.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without this modification and if CRYPTO is not selected, we have this
warning:

  WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
    Depends on [n]: CRYPTO [=n]
    Selected by [y]:
    - MPTCP [=y] && NET [=y] && INET [=y]

MPTCP selects CRYPTO_LIB_SHA256 which seems to depend on CRYPTO. CRYPTO
is now selected to avoid this issue.

Even though the config system prints that warning, it looks like
sha256.c is compiled and linked even without CONFIG_CRYPTO. Since MPTCP
will end up needing CONFIG_CRYPTO anyway in future commits -- currently
in preparation for net-next -- we propose to add it now to fix the
warning.

The dependency in the config system comes from the fact that
CRYPTO_LIB_SHA256 is defined in "lib/crypto/Kconfig" which is sourced
from "crypto/Kconfig" only if CRYPTO is selected.

Fixes: 65492c5a (mptcp: move from sha1 (v0) to sha256 (v1))
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Taehee Yoo says:

====================
bonding: fix bonding interface bugs

This patchset fixes lockdep problem in bonding interface

1. The first patch is to add missing netdev_update_lockdep_key().
After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().

2. The second patch is to export netdev_next_lower_dev_rcu symbol.
netdev_next_lower_dev_rcu() is useful to implement the function,
which is to walk their all lower interfaces.
This patch is actually a preparing patch for the third patch.

3. The last patch is to fix lockdep waring in bond_get_stats().
The stats_lock uses a dynamic lockdep key.
So, after "nomaster" operation, updating the dynamic lockdep key
routine is needed. but it doesn't
So, lockdep warning occurs.

Change log:
v1 -> v2:
 - Update headline from "fix bonding interface bugs"
   to "bonding: fix bonding interface bugs"
 - Drop a patch("bonding: do not collect slave's stats")
 - Add new patches
   - ("net: export netdev_next_lower_dev_rcu()")
   - ("bonding: fix lockdep warning in bond_get_stats()")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In the "struct bonding", there is stats_lock.
This lock protects "bond_stats" in the "struct bonding".
bond_stats is updated in the bond_get_stats() and this function would be
executed concurrently. So, the lock is needed.

Bonding interfaces would be nested.
So, either stats_lock should use dynamic lockdep class key or stats_lock
should be used by spin_lock_nested(). In the current code, stats_lock is
using a dynamic lockdep class key.
But there is no updating stats_lock_key routine So, lockdep warning
will occur.

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond0 master bond1
    ip link set bond0 nomaster
    ip link set bond1 master bond0

Splat looks like:
[   38.420603][  T957] 5.5.0+ #394 Not tainted
[   38.421074][  T957] ------------------------------------------------------
[   38.421837][  T957] ip/957 is trying to acquire lock:
[   38.422399][  T957] ffff888063262cd8 (&bond->stats_lock_key#2){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[   38.423528][  T957]
[   38.423528][  T957] but task is already holding lock:
[   38.424526][  T957] ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[   38.426075][  T957]
[   38.426075][  T957] which lock already depends on the new lock.
[   38.426075][  T957]
[   38.428536][  T957]
[   38.428536][  T957] the existing dependency chain (in reverse order) is:
[   38.429475][  T957]
[   38.429475][  T957] -> #1 (&bond->stats_lock_key){+.+.}:
[   38.430273][  T957]        _raw_spin_lock+0x30/0x70
[   38.430812][  T957]        bond_get_stats+0x90/0x4d0 [bonding]
[   38.431451][  T957]        dev_get_stats+0x1ec/0x270
[   38.432088][  T957]        bond_get_stats+0x1a5/0x4d0 [bonding]
[   38.432767][  T957]        dev_get_stats+0x1ec/0x270
[   38.433322][  T957]        rtnl_fill_stats+0x44/0xbe0
[   38.433866][  T957]        rtnl_fill_ifinfo+0xeb2/0x3720
[   38.434474][  T957]        rtmsg_ifinfo_build_skb+0xca/0x170
[   38.435081][  T957]        rtmsg_ifinfo_event.part.33+0x1b/0xb0
[   38.436848][  T957]        rtnetlink_event+0xcd/0x120
[   38.437455][  T957]        notifier_call_chain+0x90/0x160
[   38.438067][  T957]        netdev_change_features+0x74/0xa0
[   38.438708][  T957]        bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[   38.439522][  T957]        bond_enslave+0x3639/0x47b0 [bonding]
[   38.440225][  T957]        do_setlink+0xaab/0x2ef0
[   38.440786][  T957]        __rtnl_newlink+0x9c5/0x1270
[   38.441463][  T957]        rtnl_newlink+0x65/0x90
[   38.442075][  T957]        rtnetlink_rcv_msg+0x4a8/0x890
[   38.442774][  T957]        netlink_rcv_skb+0x121/0x350
[   38.443451][  T957]        netlink_unicast+0x42e/0x610
[   38.444282][  T957]        netlink_sendmsg+0x65a/0xb90
[   38.444992][  T957]        ____sys_sendmsg+0x5ce/0x7a0
[   38.445679][  T957]        ___sys_sendmsg+0x10f/0x1b0
[   38.446365][  T957]        __sys_sendmsg+0xc6/0x150
[   38.447007][  T957]        do_syscall_64+0x99/0x4f0
[   38.447668][  T957]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   38.448538][  T957]
[   38.448538][  T957] -> #0 (&bond->stats_lock_key#2){+.+.}:
[   38.449554][  T957]        __lock_acquire+0x2d8d/0x3de0
[   38.450148][  T957]        lock_acquire+0x164/0x3b0
[   38.450711][  T957]        _raw_spin_lock+0x30/0x70
[   38.451292][  T957]        bond_get_stats+0x90/0x4d0 [bonding]
[   38.451950][  T957]        dev_get_stats+0x1ec/0x270
[   38.452425][  T957]        bond_get_stats+0x1a5/0x4d0 [bonding]
[   38.453362][  T957]        dev_get_stats+0x1ec/0x270
[   38.453825][  T957]        rtnl_fill_stats+0x44/0xbe0
[   38.454390][  T957]        rtnl_fill_ifinfo+0xeb2/0x3720
[   38.456257][  T957]        rtmsg_ifinfo_build_skb+0xca/0x170
[   38.456998][  T957]        rtmsg_ifinfo_event.part.33+0x1b/0xb0
[   38.459351][  T957]        rtnetlink_event+0xcd/0x120
[   38.460086][  T957]        notifier_call_chain+0x90/0x160
[   38.460829][  T957]        netdev_change_features+0x74/0xa0
[   38.461752][  T957]        bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[   38.462705][  T957]        bond_enslave+0x3639/0x47b0 [bonding]
[   38.463476][  T957]        do_setlink+0xaab/0x2ef0
[   38.464141][  T957]        __rtnl_newlink+0x9c5/0x1270
[   38.464897][  T957]        rtnl_newlink+0x65/0x90
[   38.465522][  T957]        rtnetlink_rcv_msg+0x4a8/0x890
[   38.466215][  T957]        netlink_rcv_skb+0x121/0x350
[   38.466895][  T957]        netlink_unicast+0x42e/0x610
[   38.467583][  T957]        netlink_sendmsg+0x65a/0xb90
[   38.468285][  T957]        ____sys_sendmsg+0x5ce/0x7a0
[   38.469202][  T957]        ___sys_sendmsg+0x10f/0x1b0
[   38.469884][  T957]        __sys_sendmsg+0xc6/0x150
[   38.470587][  T957]        do_syscall_64+0x99/0x4f0
[   38.471245][  T957]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   38.472093][  T957]
[   38.472093][  T957] other info that might help us debug this:
[   38.472093][  T957]
[   38.473438][  T957]  Possible unsafe locking scenario:
[   38.473438][  T957]
[   38.474898][  T957]        CPU0                    CPU1
[   38.476234][  T957]        ----                    ----
[   38.480171][  T957]   lock(&bond->stats_lock_key);
[   38.480808][  T957]                                lock(&bond->stats_lock_key#2);
[   38.481791][  T957]                                lock(&bond->stats_lock_key);
[   38.482754][  T957]   lock(&bond->stats_lock_key#2);
[   38.483416][  T957]
[   38.483416][  T957]  *** DEADLOCK ***
[   38.483416][  T957]
[   38.484505][  T957] 3 locks held by ip/957:
[   38.485048][  T957]  #0: ffffffffbccf6230 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890
[   38.486198][  T957]  #1: ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[   38.487625][  T957]  #2: ffffffffbc9254c0 (rcu_read_lock){....}, at: bond_get_stats+0x5/0x4d0 [bonding]
[   38.488897][  T957]
[   38.488897][  T957] stack backtrace:
[   38.489646][  T957] CPU: 1 PID: 957 Comm: ip Not tainted 5.5.0+ #394
[   38.490497][  T957] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   38.492810][  T957] Call Trace:
[   38.493219][  T957]  dump_stack+0x96/0xdb
[   38.493709][  T957]  check_noncircular+0x371/0x450
[   38.494344][  T957]  ? lookup_address+0x60/0x60
[   38.494923][  T957]  ? print_circular_bug.isra.35+0x310/0x310
[   38.495699][  T957]  ? hlock_class+0x130/0x130
[   38.496334][  T957]  ? __lock_acquire+0x2d8d/0x3de0
[   38.496979][  T957]  __lock_acquire+0x2d8d/0x3de0
[   38.497607][  T957]  ? register_lock_class+0x14d0/0x14d0
[   38.498333][  T957]  ? check_chain_key+0x236/0x5d0
[   38.499003][  T957]  lock_acquire+0x164/0x3b0
[   38.499800][  T957]  ? bond_get_stats+0x90/0x4d0 [bonding]
[   38.500706][  T957]  _raw_spin_lock+0x30/0x70
[   38.501435][  T957]  ? bond_get_stats+0x90/0x4d0 [bonding]
[   38.502311][  T957]  bond_get_stats+0x90/0x4d0 [bonding]
[ ... ]

But, there is another problem.
The dynamic lockdep class key is protected by RTNL, but bond_get_stats()
would be called outside of RTNL.
So, it would use an invalid dynamic lockdep class key.

In order to fix this issue, stats_lock uses spin_lock_nested() instead of
a dynamic lockdep key.
The bond_get_stats() calls bond_get_lowest_level_rcu() to get the correct
nest level value, which will be used by spin_lock_nested().
The "dev->lower_level" indicates lower nest level value, but this value
is invalid outside of RTNL.
So, bond_get_lowest_level_rcu() returns valid lower nest level value in
the RCU critical section.
bond_get_lowest_level_rcu() will be work only when LOCKDEP is enabled.

Fixes: 089bca2c ("bonding: use dynamic lockdep key instead of subclass")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_next_lower_dev_rcu() will be used to implement a function,
which is to walk all lower interfaces.
There are already functions that they walk their lower interface.
(netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()).
But, there would be cases that couldn't be covered by given
netdev_walk_all_lower_dev_{rcu}() function.
So, some modules would want to implement own function,
which is to walk all lower interfaces.

In the next patch, netdev_next_lower_dev_rcu() will be used.
In addition, this patch removes two unused prototypes in netdevice.h.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ifenslave bond0 bond1
    ifenslave -d bond0 bond1
    ifenslave bond1 bond0

Splat looks like:
[   29.501182][ T1046] WARNING: possible circular locking dependency detected
[   29.501945][ T1039] hardirqs last disabled at (1962): [<ffffffffac6c807f>] handle_mm_fault+0x13f/0x700
[   29.503442][ T1046] 5.5.0+ #322 Not tainted
[   29.503447][ T1046] ------------------------------------------------------
[   29.504277][ T1039] softirqs last  enabled at (1180): [<ffffffffade00678>] __do_softirq+0x678/0x981
[   29.505443][ T1046] ifenslave/1046 is trying to acquire lock:
[   29.505886][ T1039] softirqs last disabled at (1169): [<ffffffffac19c18a>] irq_exit+0x17a/0x1a0
[   29.509997][ T1046] ffff88805d5da280 (&dev->addr_list_lock_key#3){+...}, at: dev_mc_sync_multiple+0x95/0x120
[   29.511243][ T1046]
[   29.511243][ T1046] but task is already holding lock:
[   29.512192][ T1046] ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[   29.514124][ T1046]
[   29.514124][ T1046] which lock already depends on the new lock.
[   29.514124][ T1046]
[   29.517297][ T1046]
[   29.517297][ T1046] the existing dependency chain (in reverse order) is:
[   29.518231][ T1046]
[   29.518231][ T1046] -> #1 (&dev->addr_list_lock_key#4){+...}:
[   29.519076][ T1046]        _raw_spin_lock+0x30/0x70
[   29.519588][ T1046]        dev_mc_sync_multiple+0x95/0x120
[   29.520208][ T1046]        bond_enslave+0x448d/0x47b0 [bonding]
[   29.520862][ T1046]        bond_option_slaves_set+0x1a3/0x370 [bonding]
[   29.521640][ T1046]        __bond_opt_set+0x1ff/0xbb0 [bonding]
[   29.522438][ T1046]        __bond_opt_set_notify+0x2b/0xf0 [bonding]
[   29.523251][ T1046]        bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[   29.524082][ T1046]        bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[   29.524959][ T1046]        kernfs_fop_write+0x276/0x410
[   29.525620][ T1046]        vfs_write+0x197/0x4a0
[   29.526218][ T1046]        ksys_write+0x141/0x1d0
[   29.526818][ T1046]        do_syscall_64+0x99/0x4f0
[   29.527430][ T1046]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   29.528265][ T1046]
[   29.528265][ T1046] -> #0 (&dev->addr_list_lock_key#3){+...}:
[   29.529272][ T1046]        __lock_acquire+0x2d8d/0x3de0
[   29.529935][ T1046]        lock_acquire+0x164/0x3b0
[   29.530638][ T1046]        _raw_spin_lock+0x30/0x70
[   29.531187][ T1046]        dev_mc_sync_multiple+0x95/0x120
[   29.531790][ T1046]        bond_enslave+0x448d/0x47b0 [bonding]
[   29.532451][ T1046]        bond_option_slaves_set+0x1a3/0x370 [bonding]
[   29.533163][ T1046]        __bond_opt_set+0x1ff/0xbb0 [bonding]
[   29.533789][ T1046]        __bond_opt_set_notify+0x2b/0xf0 [bonding]
[   29.534595][ T1046]        bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[   29.535500][ T1046]        bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[   29.536379][ T1046]        kernfs_fop_write+0x276/0x410
[   29.537057][ T1046]        vfs_write+0x197/0x4a0
[   29.537640][ T1046]        ksys_write+0x141/0x1d0
[   29.538251][ T1046]        do_syscall_64+0x99/0x4f0
[   29.538870][ T1046]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   29.539659][ T1046]
[   29.539659][ T1046] other info that might help us debug this:
[   29.539659][ T1046]
[   29.540953][ T1046]  Possible unsafe locking scenario:
[   29.540953][ T1046]
[   29.541883][ T1046]        CPU0                    CPU1
[   29.542540][ T1046]        ----                    ----
[   29.543209][ T1046]   lock(&dev->addr_list_lock_key#4);
[   29.543880][ T1046]                                lock(&dev->addr_list_lock_key#3);
[   29.544873][ T1046]                                lock(&dev->addr_list_lock_key#4);
[   29.545863][ T1046]   lock(&dev->addr_list_lock_key#3);
[   29.546525][ T1046]
[   29.546525][ T1046]  *** DEADLOCK ***
[   29.546525][ T1046]
[   29.547542][ T1046] 5 locks held by ifenslave/1046:
[   29.548196][ T1046]  #0: ffff88806044c478 (sb_writers#5){.+.+}, at: vfs_write+0x3bb/0x4a0
[   29.549248][ T1046]  #1: ffff88805af00890 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cf/0x410
[   29.550343][ T1046]  #2: ffff88805b8b54b0 (kn->count#157){.+.+}, at: kernfs_fop_write+0x1f2/0x410
[   29.551575][ T1046]  #3: ffffffffaecf4cf0 (rtnl_mutex){+.+.}, at: bond_opt_tryset_rtnl+0x5f/0xf0 [bonding]
[   29.552819][ T1046]  #4: ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[   29.554175][ T1046]
[   29.554175][ T1046] stack backtrace:
[   29.554907][ T1046] CPU: 0 PID: 1046 Comm: ifenslave Not tainted 5.5.0+ #322
[   29.555854][ T1046] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   29.557064][ T1046] Call Trace:
[   29.557504][ T1046]  dump_stack+0x96/0xdb
[   29.558054][ T1046]  check_noncircular+0x371/0x450
[   29.558723][ T1046]  ? print_circular_bug.isra.35+0x310/0x310
[   29.559486][ T1046]  ? hlock_class+0x130/0x130
[   29.560100][ T1046]  ? __lock_acquire+0x2d8d/0x3de0
[   29.560761][ T1046]  __lock_acquire+0x2d8d/0x3de0
[   29.561366][ T1046]  ? register_lock_class+0x14d0/0x14d0
[   29.562045][ T1046]  ? find_held_lock+0x39/0x1d0
[   29.562641][ T1046]  lock_acquire+0x164/0x3b0
[   29.563199][ T1046]  ? dev_mc_sync_multiple+0x95/0x120
[   29.563872][ T1046]  _raw_spin_lock+0x30/0x70
[   29.564464][ T1046]  ? dev_mc_sync_multiple+0x95/0x120
[   29.565146][ T1046]  dev_mc_sync_multiple+0x95/0x120
[   29.565793][ T1046]  bond_enslave+0x448d/0x47b0 [bonding]
[   29.566487][ T1046]  ? bond_update_slave_arr+0x940/0x940 [bonding]
[   29.567279][ T1046]  ? bstr_printf+0xc20/0xc20
[   29.567857][ T1046]  ? stack_trace_consume_entry+0x160/0x160
[   29.568614][ T1046]  ? deactivate_slab.isra.77+0x2c5/0x800
[   29.569320][ T1046]  ? check_chain_key+0x236/0x5d0
[   29.569939][ T1046]  ? sscanf+0x93/0xc0
[   29.570442][ T1046]  ? vsscanf+0x1e20/0x1e20
[   29.571003][ T1046]  bond_option_slaves_set+0x1a3/0x370 [bonding]
[ ... ]

Fixes: ab92d68f ("net: core: add generic lockdep keys")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ending character of the string shoulb be \n, not \b.

Fixes: 17936b43 ("NFC: Standardize logging style")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. This can
cause incorrect results like

  lion:~ # ethtool eth0 | grep Wake
          Supports Wake-on: pumbg
          Wake-on: g
  lion:~ # ethtool -s eth0 wol u
  lion:~ # ethtool eth0 | grep Wake
          Supports Wake-on: pumbg
          Wake-on: ug

when the second ethtool command issues request

ETHTOOL_MSG_WOL_SET
    ETHTOOL_A_WOL_HEADER
        ETHTOOL_A_HEADER_DEV_NAME = "eth0"
    ETHTOOL_A_WOL_MODES
        ETHTOOL_A_BITSET_NOMASK
        ETHTOOL_A_BITSET_BITS
            ETHTOOL_A_BITSET_BITS_BIT
                ETHTOOL_BITSET_BIT_INDEX = 1

Fix the logic by clearing the whole target bitmap before we start iterating
through the request bits.

Fixes: 10b518d4 ("ethtool: netlink bitset handling")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to ensure that the default VID is untagged otherwise the switch
will be sending tagged frames and the results can be problematic. This
is especially true with b53 switches that use VID 0 as their default
VLAN since VID 0 has a special meaning.

Fixes: fea83353 ("net: dsa: b53: Fix default VLAN ID")
Fixes: 061f6a50 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason A. Donenfeld says:

====================
wireguard fixes for 5.6-rc2

Here are four fixes for wireguard collected since rc1:

1) Some small cleanups to the test suite to help massively parallel
   builds.

2) A change in how we reset our load calculation to avoid a more
   expensive comparison, suggested by Matt Dunwoodie.

3) I've been loading more and more of wireguard's surface into
   syzkaller, trying to get our coverage as complete as possible,
   leading in this case to a fix for mtu=0 devices.

4) A removal of superfluous code, pointed out by Eric Dumazet.

v2 fixes a logical problem in the patch for (3) pointed out by Eric Dumazet. v3
replaces some non-obvious bitmath in (3) with a more obvious expression, and
adds patch (4).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

synchronize_net() is a wrapper around synchronize_rcu(), so there's no
point in having synchronize_net and synchronize_rcu back to back,
despite the documentation comment suggesting maybe it's somewhat useful,
"Wait for packets currently being received to be done." This commit
removes the extra call.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It turns out there's an easy way to get packets queued up while still
having an MTU of zero, and that's via persistent keep alive. This commit
makes sure that in whatever condition, we don't wind up dividing by
zero. Note that an MTU of zero for a wireguard interface is something
quasi-valid, so I don't think the correct fix is to limit it via
min_mtu. This can be reproduced easily with:

ip link add wg0 type wireguard
ip link add wg1 type wireguard
ip link set wg0 up mtu 0
ip link set wg1 up
wg set wg0 private-key <(wg genkey)
wg set wg1 listen-port 1 private-key <(wg genkey) peer $(wg show wg0 public-key)
wg set wg0 peer $(wg show wg1 public-key) persistent-keepalive 1 endpoint 127.0.0.1:1

However, while min_mtu=0 seems fine, it makes sense to restrict the
max_mtu. This commit also restricts the maximum MTU to the greatest
number for which rounding up to the padding multiple won't overflow a
signed integer. Packets this large were always rejected anyway
eventually, due to checks deeper in, but it seems more sound not to even
let the administrator configure something that won't work anyway.

We use this opportunity to clean up this function a bit so that it's
clear which paths we're expecting.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a small optimization that prevents more expensive comparisons
from happening when they are no longer necessary, by clearing the
last_under_load variable whenever we wind up in a state where we were
under load but we no longer are.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Matt Dunwoodie <ncon@noconroy.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This gives us fewer dependencies and shortens build time, fixes up some
hash checking race conditions, and also fixes missing directory creation
that caused issues on massively parallel builds.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Userspace should not be able to directly manipulate subflow socket
options before a connection is established since it is not yet known if
it will be an MPTCP subflow or a TCP fallback subflow. TCP fallback
subflows can be more directly controlled by userspace because they are
regular TCP connections, while MPTCP subflow sockets need to be
configured for the specific needs of MPTCP. Use the same logic as
sendmsg/recvmsg to ensure that socket option calls are only passed
through to known TCP fallback subflows.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mii management register in iproc mdio block
does not have a retention register so it is lost on suspend.
Save and restore value of register while resuming from suspend.

Fixes: bb1a6197 ("net: phy: Initialize mdio clock at probe function")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>