- 22 Dec, 2020 3 commits
-
-
Chris Chiu authored
This Acer Veriton N4640G/N6640G/N2510G desktops have 2 headphone jacks(front and rear), and a separate Mic In jack. The rear headphone jack is actually a line out jack but always silent while playing audio. The front 'Mic In' also fails the jack sensing. Apply the ALC269_FIXUP_LIFEBOOK to have all audio jacks to work as expected. Signed-off-by:
Chris Chiu <chiu@endlessos.org> Signed-off-by:
Jian-Hong Pan <jhp@endlessos.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201222150459.9545-2-chiu@endlessos.orgSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Chris Chiu authored
The Quanta NL3 laptop has both a headphone output jack and a headset jack, on the right edge of the chassis. The pin information suggests that both of these are at the Front. The PulseAudio is confused to differentiate them so one of the jack can neither get the jack sense working nor the audio output. The ALC269_FIXUP_LIFEBOOK chained with ALC269_FIXUP_QUANTA_MUTE can help to differentiate 2 jacks and get the 'Auto-Mute Mode' working correctly. Signed-off-by:
-
Mike Oliphant authored
The BOSS GT-1 (USB ID 0582:01d6) requires implicit feedback like other similar BOSS devices. This patch adds this support. [ rearranged the table entry in the ID order -- tiwai ] Signed-off-by:
Mike Oliphant <oliphant@nostatic.org> Link: https://lore.kernel.org/r/20201221215533.2511-1-oliphant@nostatic.orgSigned-off-by:
-
- 21 Dec, 2020 2 commits
-
-
Takashi Iwai authored
ASUS PRIME TRX40 PRO-S mobo with 0b05:1918 needs the same quirk alias for another ASUS mobo (0b05:1917) for the proper mixer mapping, etc. Add the corresponding entry. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210783 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201221080159.24468-1-tiwai@suse.deSigned-off-by:
-
YangHui authored
Remove redundant comments Signed-off-by:
YangHui <yanghui.def@gmail.com> Link: https://lore.kernel.org/r/1608531727-5433-1-git-send-email-yanghui.def@gmail.comSigned-off-by:
-
- 20 Dec, 2020 1 commit
-
-
Takashi Iwai authored
MSI-GP73 (with SSID 1462:1229) requires yet again ALC1220_FIXUP_CLEVO_P950 quirk like other MSI models. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210793 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201220080943.24839-1-tiwai@suse.deSigned-off-by:
-
- 18 Dec, 2020 5 commits
-
-
Takashi Iwai authored
There are a few places that call round{up|down}_pow_of_two() with the value zero, and this causes undefined behavior warnings. Avoid calling those macros if such a nonsense value is passed; it's a minor optimization as well, as we handle it as either an error or a value to be skipped, instead. Reported-by: syzbot+33ef0b6639a8d2d42b4c@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201218161730.26596-1-tiwai@suse.deSigned-off-by: -
Takashi Iwai authored
The PCM hw_params core function tries to clear up the PCM buffer before actually using for avoiding the information leak from the previous usages or the usage before a new allocation. It performs the memset() with runtime->dma_bytes, but this might still leave some remaining bytes untouched; namely, the PCM buffer size is aligned in page size for mmap, hence runtime->dma_bytes doesn't necessarily cover all PCM buffer pages, and the remaining bytes are exposed via mmap. This patch changes the memory clearance to cover the all buffer pages if the stream is supposed to be mmap-ready (that guarantees that the buffer size is aligned in page size). Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20201218145625.2045-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Currently the standard memory allocator (snd_dma_malloc_pages*()) passes the byte size to allocate as is. Most of the backends allocates real pages, hence the actual allocations are aligned in page size. However, the genalloc doesn't seem assuring the size alignment, hence it may result in the access outside the buffer when the whole memory pages are exposed via mmap. For avoiding such inconsistencies, this patch makes the allocation size always to be aligned in page size. Note that, after this change, snd_dma_buffer.bytes field contains the aligned size, not the originally requested size. This value is also used for releasing the pages in return. Reviewed-by:
-
Takashi Iwai authored
Some buggy firmware don't give the current sample rate but leaves zero. Handle this case more gracefully without warning but just skip the current rate verification from the next time. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.deSigned-off-by:
-
Lars-Peter Clausen authored
Since commit d4cfb30f ("ALSA: pcm: Set per-card upper limit of PCM buffer allocations") snd_pcm_lib_preallocate_dma_free() is a single line function that has one caller, which is another single line function. Clean this up a bit and remove snd_pcm_lib_preallocate_dma_free() and directly call do_free_pages() from snd_pcm_lib_preallocate_free(). This is a bit less boilerplate. Signed-off-by:
-
- 17 Dec, 2020 3 commits
-
-
Amadej Kastelic authored
Add VID to support native DSD reproduction on FiiO devices. Tested-by:
Amadej Kastelic <amadejkastelic7@gmail.com> Signed-off-by:
Emilio Moretti <emilio.moretti@gmail.com> Signed-off-by:
-
Robin Gong authored
Since mmap for userspace is based on page alignment, add page alignment for iram alloc from pool, otherwise, some good data located in the same page of dmab->area maybe touched wrongly by userspace like pulseaudio. Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1608221747-3474-1-git-send-email-yibin.gong@nxp.comSigned-off-by:
-
Kailang Yang authored
This platform only supported iphone type headset. It can't support Dell headset mode. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/b97e971978034bc9b772a08ec91265e8@realtek.comSigned-off-by:
-
- 16 Dec, 2020 1 commit
-
-
Chris Chiu authored
Acer TravelMate laptops P648/P658 series with codec ALC282 only have one physical jack for headset but there's a confusing lineout pin on NID 0x1b reported. Audio applications hence misunderstand that there are a speaker and a lineout, and take the lineout as the default audio output. Add a new quirk to remove the useless lineout and enable the pin 0x18 for jack sensing and headset microphone. Signed-off-by:
-
- 14 Dec, 2020 4 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.11 There's a lot of changes here but mostly cleanups and driver specific things, the most user visible change is the support for boot time selection of Intel DSP firmware which will make it easier for people to move over to the preferred modern implementations in distros and other large scale deployments. This also includes a merge of the new auxillary bus which was done in anticipation of use by the Intel DSP drivers which didn't quite make it. - Lots more cleanups and simplifications from Morimoto-san. - Support for some basic DPCM systems in the audio graph card from Sameer Pujar. - Remove some old pre-DT Freescale drivers for platforms that are now DT only. - Move selection of which Intel DSP implementation to use to boot time rather than requiring it to be selected at build time. - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715, Qualcomm SM8250 and simple GPIO based muxes.
-
Takashi Iwai authored
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer where it calculates the buffer size with the arbitrary shift value given via an ioctl. Add a range check for avoiding the undefined behavior. As the value can be treated by a signed integer, the max shift should be 30. Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209084552.17109-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
syzbot spotted a potential out-of-bounds shift in the USB-audio format parser that receives the arbitrary shift value from the USB descriptor. Add a range check for avoiding the undefined behavior. Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209084552.17109-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
- 12 Dec, 2020 2 commits
-
-
Connor McAdams authored
Add pre-dsp download initialization for the DAC's used in the surround sound configuration. Fixes issues of no audio on surround channels. Fixes: 2e492b8e ("ALSA: hda/ca0132 - Add ZxR init commands") Signed-off-by:
Connor McAdams <conmanx360@gmail.com> Link: https://lore.kernel.org/r/20201211225504.4508-2-conmanx360@gmail.comSigned-off-by:
-
Connor McAdams authored
Add helper functions for the 8051 PLL PMU write verbs. Signed-off-by:
-
- 11 Dec, 2020 19 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
Merge series "ASoC: SOF: Intel: fix to dsp state dump trace levels" from Kai Vehmanen <kai.vehmanen@linux.intel.com>: Small series that addresses a problem where DSP status dump for a failure case, ends up being printed as as debug print. This is important information for any bug report. While at it, the series contains a few cleanups to related code. Ranjani Sridharan (3): ASoC: SOF: Intel: hda: remove duplicated status dump ASoC: SOF: modify the SOF_DBG flags ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err sound/soc/sof/debug.c | 2 +- sound/soc/sof/intel/byt.c | 2 +- sound/soc/sof/intel/hda-loader.c | 19 +++++++++++++------ sound/soc/sof/intel/hda.c | 10 ++++------ sound/soc/sof/loader.c | 4 ++-- sound/soc/sof/ops.c | 2 +- sound/soc/sof/sof-priv.h | 13 ++++++++----- 7 files changed, 30 insertions(+), 22 deletions(-) -- 2.29.2
-
Mark Brown authored
Merge series "ASoC: rt1015p: delay 300ms for waiting calibration" from Tzung-Bi Shih <tzungbi@google.com>: The 1st patch moves SDB control from DAI ops trigger to DAPM event (per review comments in v1). The 2nd patch adds the 300ms delay for waiting calibration. Changes from v2: - Use gpiod_set_value_cansleep() instead of gpiod_set_value(). (https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-2-tzungbi@google.com/) - Assuming the calibration state gets lost after system suspend. (https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-3-tzungbi@google.com/) Changes from v1: (https://patchwork.kernel.org/project/alsa-devel/patch/20201209033742.3825973-1-tzungbi@google.com/) - Move the delay from trigger to DAPM event. Tzung-Bi Shih (2): ASoC: rt1015p: move SDB control from trigger to DAPM ASoC: rt1015p: delay 300ms after SDB pulling high for calibration sound/soc/codecs/rt1015p.c | 69 ++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 37 deletions(-) -- 2.29.2.684.gfbc64c5ab5-goog
-
Kai Vehmanen authored
The check for infoframe transmit status in hdmi_infoframe_uptodate() makes the assumption that packet buffer index is set to zero. Align code with specification and explicitly set the index before AC_VERB_GET_HDMI_DIP_XMIT. The packet index setting affects both DIP-Data and DIP-XmitCtrl verbs. There are no known cases where the old implementation has caused driver to work incorrectly. This change is purely based on code review against the specification (HDA spec rev1.0a). Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201211131613.3271407-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add missing parameters to avoid W=1 error Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
This has a goto followed by an unreachable return statement. The goto is correct because it cleans up so the current runtime behavior is fine. Let's delete the unreachable return statement. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9NFg3KVm16Gx6Io@mwandaSigned-off-by:
-
Tzung-Bi Shih authored
Adds PM ops to machine drivers so that they notify components in the sound card when system suspend. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20201211051334.2313899-1-tzungbi@google.comSigned-off-by:
-
Amadeusz Sławiński authored
Dan reported that smatch reports wrong size check and after analysis it is confirmed that we are comparing wrong value: pointer size instead of array size. However the check itself is problematic as in UAPI header there are two fields: struct snd_soc_tplg_enum_control { (...) char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; __le32 values[SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN / 4]; the texts field is for names and the values one for values assigned to those named fields, after analysis it becomes clear that there is quite a lot overhead values than we may possibly name. So instead of changing check to ARRAY_SIZE(ec->values), as it was first suggested, use hardcoded value of SND_SOC_TPLG_NUM_TEXTS. Link: https://lore.kernel.org/alsa-devel/X9B0eDcKy+9B6kZl@mwanda/Reported-by:Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
-
Amadeusz Sławiński authored
When we parse "values" we perform check if there is correct number of them. However similar check is missing in case of "texts", add it. Signed-off-by:
-
Ranjani Sridharan authored
The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine the log level for the DSP status dump would only work in the case of DSP init failure after maximum number of attempts to initialize the DSP. If DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW loading fails, the ROM status dump would end up getting logged as debug instead of an error. So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify the log level for DSP status dump. Signed-off-by:
-
Ranjani Sridharan authored
The SOF_DBG_* macros are used for dual purposes right now, for the sof_core_debug module parameter and for the dbg_dump() ops. So, separate these two types of flags into different types to avoid confusion. Signed-off-by:
-
Ranjani Sridharan authored
Remove the duplicate status dump in case DSP init fails. The core will be powered down in this case and the status dump will be invalid anyway. Signed-off-by:
-
Tzung-Bi Shih authored
RT1015p needs 300ms delay after SDB pulling high for internal calibration during the power on sequence. Delays 300ms right before data sends out to avoid data truncated. Assuming the calibration state gets lost after system suspend. Signed-off-by:
-
Tzung-Bi Shih authored
Moves SDB control from DAI ops trigger to DAPM. As long as BCLK and LRCLK are ready, SDB can be toggled earlier. Changes from using gpiod_set_value() to gpiod_set_value_cansleep() because it executes in non-atomic context. Signed-off-by:
-
Dan Carpenter authored
The error handling frees "ctl" but it's still on the "dsp->ctl_list" list so that could result in a use after free. Remove it from the list before returning. Fixes: 2323736d ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwandaSigned-off-by:
-
Takashi Iwai authored
The current channel-map control implementation in USB-audio driver may lead to an error message like "control 3:0:0:Playback Channel Map:0: access overflow" when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get callback clears the whole array no matter which count is set, and rather the false-positive detection. This patch fixes the problem by clearing only the needed array range at usb_chmap_ctl_get(). Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.deSigned-off-by:
-
Kai Vehmanen authored
The debug prints from patch_hdmi.c are not aligned with HDA common code in hda_codec.c nor with other HDA codec drivers. To align with rest of the codebase, use hexadecimal formatting whenever printing value of a HDA NID. Also refer to NIDs with capital letters in traces as is done other modules. This presentation is also aligned with the formatting used in HDA codec procfs entry. Signed-off-by:
-
