- 12 Apr, 2012 26 commits
-
-
Avinash Patil authored
This patches enables setting association request and probe request IE for station interface. WPS exchange between WPS2.0 AP and mwifiex STA Enrollee/External Registrar completes successfully. Tested with wpa_supplicant 1.0 and 2.0 devel. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Use "priv->country_code" string to display country information in debugfs command "info" instead of "adapter->region_code". "adapter->region_code" contains default region code got from FW while initialization, whereas "priv->country_code" is updated in reg_notifier handler whenever there is a change in regulatory domain. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Driver gets region code from FW during initialisation. This patch makes use of it for settting default regulatory domain using regulatory_hint() API. Signed-off-by:
-
Bing Zhao authored
This is a copy-n-paste error introduced in recent patch "mwifiex: add set_cqm_rssi_config handler support". Signed-off-by:
-
Johannes Berg authored
This will later be used to dynamically bind the configuration data for DVM and MVM. For now, we can use it to get rid of the additional_nic_config() hook. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Johannes Berg authored
The iwl-shared.h header file will be going away soon. There isn't much left in it that we keep, other than the device configuration declarations. Move those out now to a new iwl-config.h header. iwl-cfg.h seemed like a possible alternative but those declarations will later live in the PCIe transport code. Signed-off-by:
-
Johannes Berg authored
The whole code around eeprom is distributed across whole bunch of different files, most of which belong to the to-be-DVM code. As a result, it is currently very hard to split out the EEPROM code to be generic. However, it is also quite unlikely that the current EEPROM code will be needed by the MVM code as that has different mechanisms to query the EEPROM (it does so through the uCode.) So, at least temporarily, move everything into priv. If it becomes necessary to use the code from MVM, we will have to split it out, but then it's also easier since we'll know what pieces we need. Signed-off-by:
-
Johannes Berg authored
Split the force_reset debugfs file into two different files: * "rf_reset" triggers a reset of the RF when written to and exposes statistics on RF resets when read * fw_restart triggers a firmware restart when written to and lives in the transport This cleans up all sources of firmware restart to originate within the transport layer and allows us to simplify some code. Signed-off-by:
-
Johannes Berg authored
This defaults to false, and we don't recommend to use it anywhere, so just remove it. Signed-off-by:
-
Johannes Berg authored
The hw_params are mostly values that are derived from the actual hardware config. As such, while it is possible that MVM will require similar ones, it makes more sense -- at least for now -- to put them into the DVM struct. Signed-off-by:
-
Johannes Berg authored
This removes one of the two sources of device restarts in the upper layer -- those are a bit inconvenient because normal restarts originate in the transport. By moving the watchdog down it can be treated the same. Also rewrite the watchdog logic. Timers are much more efficient when they never fire, so instead firing a timer every 500ms set up a timer for each TX queue and fire it only when the queue is really stuck. This avoids the CPU waking up when everything is working well. While at it, remove the wd_disable config item and replace it by simply setting wd_timeout to IWL_WATCHHDOG_DISABLED (0). Signed-off-by:
-
Johannes Berg authored
Signed-off-by:
-
Johannes Berg authored
This file isn't really all that useful as when the watchdog triggered it's already too late, and the setting doesn't persist unlike e.g. a module parameter that could be added to the right config file. Signed-off-by:
-
Johannes Berg authored
That way it isn't needed in hw_params, which is shared data. It also isn't really what we should configure in the transport, that is better just 4k/8k, so configure a bool and derive the page order in the transport. This also means the transport doesn't need access to the module parameter any more. Signed-off-by:
-
Jesper Juhl authored
The release_firmware() function does its own NULL test so a test before calling it is rather redundant. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Jesper Juhl authored
It is redundant to test for NULL pointers before calling release_firmware() since the function does its own NULL test. Signed-off-by:
-
Jesper Juhl authored
Since release_firmware() does its own test for NULL it is redundant to do so before calling it. Signed-off-by:
-
Jesper Juhl authored
release_firmware() tests for, and deals gracefully with, NULL pointers. Remove redundant explicit tests before calling the function. Signed-off-by:
-
Jesper Juhl authored
The release_firmware() function does its own NULL test, so testing before calling it is rather redundant. Signed-off-by:
-
Jesper Juhl authored
release_firmware() does its own test. Explicitly checking before the call is redundant. Signed-off-by:
-
Jesper Juhl authored
The release_firmware() function deals gracefully with being passed a NULL pointer, so explicit tests before the call are rather pointless. Signed-off-by:
-
Forest Bond authored
The chip version constant (0xCC33) was taken from version 0001.0105.2011 of the GPL vendor driver. Note that this driver version also ships a firmware update, but I am unsure if it is required for E-CUT chips to function properly. A nearby spelling error was also corrected. Signed-off-by:
Forest Bond <forest.bond@rapidrollout.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Forest Bond authored
The previous definitions included both {B,C,D,E}_CUT_VERSION and CHIP_92D_{C,D}_CUT with conflicting values for the C and D cut versions, and literal hex values were used in the IS_92D_{C,D,E}_CUT macros. So we clean all this up and in doing so enable cut-specific code paths for cuts C and D, which would not have been executed because the CHIP_92D_{C,D}_CUT constants were wrong and the cut version was thus recorded incorrectly. Signed-off-by: -
Lorenzo Bianconi authored
Added support for Belkin Surf N300 XR wireless usb adapter to rtlwifi driver Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by:
-
-
-
- 11 Apr, 2012 14 commits
-
-
Stanislaw Gruszka authored
This is workaround H/W or F/W bug, see in code comments. Without the fix ping can receive duplicated ICMP frames while associated with legacy AP. Reported-by:
Walter Goldens <goldenstranger@yahoo.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Stanislav Yakovlev authored
Driver does not use it any more. Signed-off-by:
Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
-
Stanislav Yakovlev authored
and all referenced structs and corresponding enums because the driver does not use it. Note: keep libipw_info_element struct since it is still in use. Signed-off-by:
-
Thomas Pedersen authored
The firmware may decide to switch channels while already beaconing, e.g. in response to a cfg80211 connect request on a different vif. Add this event to notify userspace when an AP or GO interface has successfully migrated to a new channel, so it can update its configuration accordingly. Signed-off-by:
Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by:
-
Qasim Javed authored
ath5k: Remove extraneous statements from ath5k_hw_proc_4word_tx_status and ath5k_hw_proc_2word_status. Signed-off-by:
Qasim Javed <qasimj@gmail.com> Signed-off-by:
-
Johannes Berg authored
In WoWLAN, we only get the triggers when we actually get to suspend. As a consequence, drivers currently don't know that the device should enable wakeup. However, the device_set_wakeup_enable() API is intended to be called when the wakeup is enabled, not later when needed. Add a new set_wakeup() call to cfg80211 and mac80211 to allow drivers to properly call device_set_wakeup_enable. Signed-off-by:
-
Joe Perches authored
Semicolons are not necessary after macros that end in while (0). Remove them. Simplify the macros with tests of do { if (foo>size) memset1; else memset2;} while (0); to a single line memset(,,min_t(size_t, foo, size)) Signed-off-by:Joe Perches <joe@perches.com> Acked-by:
Arend van Spriel <arend@broadcom.com> Acked-by:
-
Ben Greear authored
This adds counters in various places that can drop packets on rx without otherwise incrementing a counter. It also counts some non-error cases, such as becons and fragments received. Should help with figuring out where packets are (and are not) dropped. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Ben Greear authored
This counts any failure during getting packets into the DMA buffers, including out-of-memory, etc. Signed-off-by:
-
Zefir Kurtisi authored
Follow updates in DFS pattern detector interface: a) use given pulse event structure b) adapt to boolean return value of add_pulse() Signed-off-by:
Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by:
-
Zefir Kurtisi authored
Signed-off-by:
-
Zefir Kurtisi authored
This adds a DFS pattern detector to ath9k. It is fed with pulse events by the radar pulse detector and reports in place whether a pattern was detected. On detection, the result is reported as radar event to the DFS management component in the upper layer. Currently the ETSI DFS domain is supported with detector lines for the patterns defined by EN-301-893 v1.5.1. Support for FCC and JP will be added gradually. To include the pattern detector, ath9k must be built with support for DFS certified config flag set (CONFIG_ATH9K_DFS_CERTIFIED). Signed-off-by:
-
Johannes Berg authored
Eliad's comment prompted me to look closer at the error paths in ieee80211_do_open() and I found one that should use the error labels. Also add a comment about the clear_bit since in many error cases the bit hasn't been set. Cc: Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Johannes Berg authored
mac80211 currently only supports one hardware queue per AC. This is already problematic for off-channel uses since if we go off channel while the BE queue is full and then try to send an off-channel frame the frame will never go out. This will become worse when we support multi-channel since then a queue on one channel might be full, but we have to stop the software queue for all channels. That is obviously not desirable. To address this problem allow drivers to register more hardware queues, and allow them to map them to virtual interfaces. When they stop a hardware queue the corresponding AC software queues on the correct interfaces will be stopped as well. Additionally, there's an off-channel queue to solve that problem and a per-interface after-DTIM beacon queue. This allows drivers to manage software queues closer to how the hardware works. Currently, there's a limit of 16 hardware queues. This may or may not be sufficient, we can adjust it as needed. Signed-off-by:
-
