- 30 Aug, 2021 23 commits
-
-
Linus Walleij authored
The driver is being passed interrupts, then looking up the same interrupts as GPIOs a second time to convert them into interrupts and set properties on them. This is pointless: the GPIO and irqchip APIs of a GPIO chip are orthogonal. Just request the interrupts and be done with it, drop reliance on any GPIO functions or definitions. Use devres-managed functions and add a small devress quirk to unregister the clock as well and we can rely on devres to handle all the resources and cut down a bunch of boilerplate in the process. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Change the driver to use portable integer types to avoid warnings during compile testing, including: drivers/net/ethernet/xscale/ixp4xx_eth.c:721:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast] memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); ^ drivers/net/ethernet/xscale/ixp4xx_eth.c:963:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types] &port->desc_tab_phys))) ^~~~~~~~~~~~~~~~~~~~ include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here dma_addr_t *handle); ^ Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
After the recent ixp4xx cleanups, the ptp driver has gained a build failure in some configurations: drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init': drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function) Avoid the last bit of hardcoded constants from platform headers by turning the ptp driver bit into a platform driver and passing the IRQ and MMIO address as resources. This is a bit tricky: - The interface between the two drivers is now the new ixp46x_ptp_find() function, replacing the global ixp46x_phc_index variable. The call is done as late as possible, in hwtstamp_set(), to ensure that the ptp device is fully probed. - As the ptp driver is now called by the network driver, the link dependency is reversed, which in turn requires a small Makefile hack - The GPIO number is still left hardcoded. This is clearly not great, but it can be addressed later. Note that commit 98ac0cc2 ("ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER") changed the IRQ number to something meaningless. Passing the correct IRQ in a resource fixes this. - When the PTP driver is disabled, ethtool .get_ts_info() now correctly lists only software timestamping regardless of the hardware. Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: add some cleanups This series includes some cleanups for the HNS3 ethernet driver. ==================== Signed-off-by: -
Hao Chen authored
The parameter name of hclge_ptp_clean_tx_hwts() in declaration is "dev", but the definition of this function is used the common name "hdev" as other functions, so modify it. Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Hao Chen authored
Replace the "? :" statement wich max() to simplify code. Signed-off-by:
-
Hao Chen authored
The type of tqp_vector->vector_irq is int, so modify its print format to "%d". Signed-off-by:
-
Guangbin Huang authored
To improve flexibility, simplicity and maintainability to dump info of every element of tm priority, add a struct hclge_dbg_item array of tm priority and fill string of every data according to this array. Signed-off-by:
-
Guangbin Huang authored
This patch reconstructs function hclge_ets_validate() to reduce the code cycle complexity and make code more concise. Signed-off-by:
-
Peng Li authored
This patch reconstructs function hns3_self_test to reduce the code cycle complexity and make code more concise. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Jiaran Zhang authored
To make the format of each member initialization of structure array clearer, initialize each member on a separate line. Signed-off-by:
Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Implement new driver APIs to send FW messages The current driver APIs to send messages to the firmware allow only one outstanding message in flight. There is only one buffer for the firmware response for each firmware channel. To send a firmware message, all callers must take a mutex and it is released after the firmware response has been read. This scheme does not allow multiple firmware messages in flight. Firmware may take a long time to respond to some messages (e.g. NVRAM related ones) and this causes the mutex to be held for a long time, blocking other callers. This patchset intoduces the new driver APIs to address the above shortcomings. The new APIs are compatible with new and old firmware. But the new deferred firmware response mechanism will require newer firmware in order to allow multiple outstanding firmware commands. All callers are updated to use the new APIs. v2: Patch 4 and patch 9 updated to fix issues reported by test robot ==================== Signed-off-by: -
Edwin Peer authored
Add infrastructure to maintain a pending list of HWRM commands awaiting completion and reduce the scope of the hwrm_cmd_lock mutex so that it protects only the request mailbox. The mailbox is free to use for one or more concurrent commands after receiving deferred response events. For uniformity and completeness, use the same pending list for collecting completions for commands that respond via a completion ring. These commands are only used for freeing rings and for IRQ test and we only support one such command in flight. Note deferred responses are also only supported on the main channel. The secondary channel (KONG) does not support deferred responses. Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Edwin Peer authored
There are no longer any callers relying on the old API. Signed-off-by:
-
Edwin Peer authored
The conversion follows this general pattern for most of the calls: 1. The input message is changed from a stack variable initialized using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized using hwrm_req_init(). 2. If we don't need to read the firmware response, the hwrm_send_message() call is replaced with hwrm_req_send(). 3. If we need to read the firmware response, the mutex lock is replaced by hwrm_req_hold() to hold the response. When the response is read, the mutex unlock is replaced by hwrm_req_drop(). If additional DMA buffers are needed for firmware response data, the hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent(). Some minor refactoring is also done while doing these conversions. v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings() and bnxt_approve_mac() Signed-off-by:
-
Edwin Peer authored
We currently use the hwrm_cmd_lock to serialize the update of the firmware's link status response data and the copying of link status data to the VF. This won't work when we update the firmware message APIs, so we use the link_lock mutex instead. All link_info data should be updated under the link_lock mutex. Also add link_lock to functions that touch link_info in __bnxt_open_nic() and bnxt_probe_phy(). The locking is probably not strictly necessary during probe, but it's more consistent. Signed-off-by:
-
Edwin Peer authored
Slices are a mechanism for suballocating DMA mapped regions from the request buffer. Such regions can be used for indirect command data instead of creating new mappings with dma_alloc_coherent(). The advantage of using a slice is that the lifetime of the slice is bound to the request and will be automatically unmapped when the request is consumed. A single external region is also supported. This allows for regions that will not fit inside the spare request buffer space such that the same API can be used consistently even for larger mappings. Signed-off-by:
-
Edwin Peer authored
hwrm_req_replace() provides an assignment like operation to replace a managed HWRM request object with data from a pre-built source. This is useful for handling request data provided by higher layer HWRM clients. Signed-off-by:
-
Edwin Peer authored
During firmware crash recovery, it is possible for firmware to respond to stale HWRM commands that have already timed out. Because response buffers may be reused, any out of sequence responses need to be ignored and only the matching seq_id should be accepted. Also, READ_ONCE should be used for the reads from the DMA buffer to ensure that the necessary loads are scheduled. Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
Edwin Peer authored
This change constitutes a major step towards supporting multiple firmware commands in flight by maintaining a separate response buffer for the duration of each request. These firmware commands are also known as Hardware Resource Manager (HWRM) commands. Using separate response buffers requires an API change in order for callers to be able to free the buffer when done. It is impossible to keep the existing APIs unchanged. The existing usage for a simple HWRM message request such as the following: struct input req = {0}; bnxt_hwrm_cmd_hdr_init(bp, &req, REQ_TYPE, -1, -1); rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); if (rc) /* error */ changes to: struct input *req; rc = hwrm_req_init(bp, req, REQ_TYPE); if (rc) /* error */ rc = hwrm_req_send(bp, req); /* consumes req */ if (rc) /* error */ The key changes are: 1. The req is no longer allocated on the stack. 2. The caller must call hwrm_req_init() to allocate a req buffer and check for a valid buffer. 3. The req buffer is automatically released when hwrm_req_send() returns. 4. If the caller wants to check the firmware response, the caller must call hwrm_req_hold() to take ownership of the response buffer and release it afterwards using hwrm_req_drop(). The caller is no longer required to explicitly hold the hwrm_cmd_lock mutex to read the response. 5. Because the firmware commands and responses all have different sizes, some safeguards are added to the code. This patch maintains legacy API compatibiltiy, implementing the old API in terms of the new. The follow-on patches will convert all callers to use the new APIs. v2: Fix redefined writeq with parisc .config Fix "cast from pointer to integer of different size" warning in hwrm_calc_sentinel() Signed-off-by: -
Edwin Peer authored
Move all firmware messaging functions and definitions to new bnxt_hwrm.[ch]. The follow-on patches will make major modifications to these APIs. Signed-off-by:
-
Edwin Peer authored
Refactor the code so that __bnxt_hwrm_ver_get() does not call bnxt_hwrm_do_send_msg() directly. The new APIs will not expose this internal call. Add a new bnxt_hwrm_poll() to poll the HWRM_VER_GET firmware call silently. The other bnxt_hwrm_ver_get() function will send the HWRM_VER_GET message directly with error logs enabled. Signed-off-by:
-
Edwin Peer authored
The additional response buffer serves no useful purpose. There can be only one firmware command in flight due to the hwrm_cmd_lock mutex, which is taken for the entire duration of any command completion, KONG or otherwise. It is thus safe to share a single DMA buffer. Removing the code associated with the additional mapping will simplify matters in the next patch, which allocates response buffers from DMA pools on a per request basis. Signed-off-by:
-
- 29 Aug, 2021 17 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-2021-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next-2021-08-29 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. wireless-drivers-next patches for v5.15 Second, and most likely last, set of patches for v5.15. Lots of iwlwifi patches this time, but smaller changes to other drivers as well. Nothing special standing out. Major changes: rtw88 * add quirk to disable pci caps on HP Pavilion 14-ce0xxx brcmfmac * Add WPA3 Personal with FT to supported cipher suites wcn36xx * allow firmware name to be overridden by DT iwlwifi * support scanning hidden 6GHz networks * support for a new hardware family (Bz) * support for new firmware API versions mwifiex * add reset_d3cold quirk for Surface gen4+ devices ==================== Signed-off-by:
-
Jing Yangyang authored
./include/linux/ssb/ssb_driver_extif.h:200:8-9:WARNING: return of 0/1 in function 'ssb_extif_available' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824061341.59255-1-deng.changcheng@zte.com.cn
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Tsuchiya Yuto authored
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it seems that putting the wifi device into D3cold is required according to errata.inf file on Windows installation (Windows/INF/errata.inf). This patch adds a function that performs power-cycle (put into D3cold then D0) and call the function at the end of reset_prepare(). Note: Need to also reset the parent device (bridge) of wifi on SB1; it might be because the bridge of wifi always reports it's in D3hot. When I tried to reset only the wifi device (not touching parent), it gave the following error and the reset failed: acpi device:4b: Cannot transition to power state D0 for parent in D3hot mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible) Signed-off-by:Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by:
Jonas Dreßler <verdre@v0yd.nl> Signed-off-by:
-
Jonas Dreßler authored
This commit adds the ability to apply device-specific quirks to the mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses with dmi.c. We'll add identifiers to match various MS Surface devices, which this is primarily meant for, later. This commit is a slightly modified version of a previous patch sent in by Tsuchiya Yuto. Co-developed-by:
-
Ahmad Fatoum authored
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a hot resume and then fall back to removing the PCI device and then reprobing. If this probe fails, the kernel will oops, because brcmf_err, which is called to report the failure will dereference the stale bus pointer. Open code and use the default bus-less brcmf_err to avoid this. Fixes: 8602e624 ("brcmfmac: pass bus to the __brcmf_err() in pcie.c") Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
-
Zenghui Yu authored
As it had never been used since the initial commit 8369ae33 ("bcma: add Broadcom specific AMBA bus driver"). Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Zenghui Yu authored
kmemleak reported that dev_name() of internally-handled cores were leaked on driver unbinding. Let's use device_initialize() to take refcounts for them and put_device() to properly free the related stuff. While looking at it, there's another potential issue for those which should be *registered* into driver core. If device_register() failed, we put device once and freed bcma_device structures. In bcma_unregister_cores(), they're treated as unregistered and we hit both UAF and double-free. That smells not good and has also been fixed now. Fixes: ab54bc84 ("bcma: fill core details for every device") Signed-off-by:
-
Kalle Valo authored
Merge commit 'e257d969' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next I think last commits in tag iwlwifi-next-for-kalle-2021-08-26 are not ready yet so I'm skipping those and pulling an earlier commit. I modified Luca's description below to not include the skipped commits. iwlwifi patches for v5.15 * Support scanning hidden 6GHz networks; * Some improvements in the FW error dumps; * Add some HE capability flags * A bunch of janitorial clean-ups; * Clean-ups in the TX code; * Small fix for SMPS; * Support for a new hardware family (Bz); * Small fix in the scan code; * A bunch of changes in the D3 code, including new FW API; * Finalize the refactoring of 6GHz scan; * Initial changes in the SAR profile code; * Fix reading one of our ACPI tables (WTAS); * Support some new ACPI table revisions; * Support new API of the WoWlan status FW notification; * Fixes in SAR ACPI tables handling; * Some debugging improvements; * Fix in ROC; * Support for new FW API versions; * Support new FW command versions; * Some other small fixes, clean-ups and improvements.
-
Li RongQing authored
smp_processor_id()/raw* will be called once each when not more queues in virtnet_xdp_get_sq() which is called in non-preemptible context, so it's safe to call the function smp_processor_id() once. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. Finally, the now useless 'dma_mask' variable has been removed. It has been compile tested. @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been compile tested. @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Subbaraya Sundeep authored
NPC extraction profile marks layer types NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for STAG after parsing input packet. Those layer types can be used to install ntuple filters using vlan-etype option. Below are the commands and corresponding behavior with this patch in place. > alias nt "ethtool -U eth0 flow-type ether" > nt vlan 5 m 0xf000 action 0 Input packets with outer VLAN id as 5 i.e, stag packets with VLAN id 5 and ctag packets with VLAN id as 5 are hit. > nt vlan-etype 0x8100 action 0 All input ctag packets with any VLAN id are hit. > nt vlan-etype 0x88A8 action 0 All input stag packets with any VLAN id are hit. > nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0 All input ctag packets with VLAN id 5 are hit. > nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0 All input stag packets with VLAN id 5 are hit. Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Sunil Goutham authored
Fixed inconsistent license text across the RVU admin function driver. Signed-off-by:
-
Sunil Goutham authored
Fixed inconsistent license text across the netdev drivers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-David S. Miller authored
queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-08-27 ravindhan Gunasekaran says: This adds support for Credit-based shaper qdisc offload from Traffic Control system. It enables traffic prioritization and bandwidth reservation via the Credit-Based Shaper which is implemented in hardware by i225 controller. Patch 1/3 adds a default cycle-time for TSN mode to be configured. Patch 2/3 helps to separate TSN mode programming on the fly and during reset sequence. It also simplifies handling features flags for various TSN modes supported by i225 in the driver. Patch 3/3 adds support for IEEE802.1Qav(CBS) standard implemented in i225 HW. Two sets of CBS HW shapers are present in i225 and driver enables them in the two high priority queues. ==================== Signed-off-by:
-
