- 01 May, 2022 38 commits
-
-
Dmitry Baryshkov authored
dp_bridge's functions are thin wrappers around the msm_dp_display_* family. Squash dp_bridge callbacks into respective msm_dp_display functions, removing the latter functions from public space. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473858/ Link: https://lore.kernel.org/r/20220211224006.1797846-6-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
There is little point in having both connector and root bridge implementation in the same driver. Move connector's functionality to the bridge to let next bridge in chain to override it. Signed-off-by:
-
Abhinav Kumar authored
Change the DRM traces to include both the intf_mode and wb_idx similar to the DRM prints in the previous change. Signed-off-by:
-
Abhinav Kumar authored
Add wb_idx to existing DRM prints in dpu_encoder and also print the intf_mode so that its clear that for any INTF_CMD/VID there will be a valid intf_idx and any INTF_WB_* there will be a valid wb_idx. Update the debugfs to add the same information. Here is a sample output with this change: root:/sys/kernel/debug/dri/0/encoder31# cat status intf:1 wb:-1 vsync: 31 underrun: 0 mode: INTF_MODE_VIDEO root:/sys/kernel/debug/dri/0/encoder33# cat status intf:-1 wb:2 vsync: 7 underrun: 0 mode: INTF_MODE_WB_LINE Also remove DPU_DEBUG_PHYS macros as its unused because the respective dpu_encoder_phys_* files have their own macros. changes in v2: - use switch case instead of if/else-if for get_intf_type Signed-off-by:
-
Abhinav Kumar authored
Add writeback block information while capturing the display snapshot. Signed-off-by:
-
Abhinav Kumar authored
kms_writeback test cases also verify with a null fb for the writeback connector job. In addition there are also other commit paths which can result in kickoffs without a valid framebuffer like while closing the fb which results in the callback to drm_atomic_helper_dirtyfb() which internally triggers a commit. Add protection in the dpu driver to ensure that commits for writeback encoders without a valid fb are gracefully skipped. changes in v2: - rename dpu_encoder_has_valid_fb to dpu_encoder_is_valid_for_commit changes in v3: - none Signed-off-by:
-
Abhinav Kumar authored
Initialize dpu encoder and connector for writeback if the target supports it in the catalog. changes in v2: - start initialing the encoder for writeback since we have migrated to using drm_writeback_connector_init_with_encoder() - instead of checking for WB_2 inside _dpu_kms_initialize_writeback call it only when its WB_2 - rebase on tip of msm-next and remove usage of priv->encoders changes in v3: - none changes in v4: - fix copyright years order Signed-off-by:
-
Abhinav Kumar authored
Introduce the dpu_writeback module which serves as the interface between dpu operations and the drm_writeback. This module manages the connector related operations for dpu writeback. changes in v2: - start using drm_writeback_connector_init_with_encoder() - drop unnecessary arguments from dpu_writeback_init() - rebase on msm-next tip and remove usage of priv->connectors changes in v3: - none changes in v4: - none changes in v5: - store the drm_enc in the dpu_wb_conn to be used while using dpu_encoder APIs Signed-off-by:
-
Abhinav Kumar authored
Introduce the dpu_encoder_phys_* for the writeback interface to handle writeback specific hardware programming. changes in v4: - squash the encoder_phys_wb bits from [1] - since its a trivial change of a previously acked change preserving the ack [1] https://patchwork.freedesktop.org/patch/483099/?series=102964&rev=2Signed-off-by:
-
Abhinav Kumar authored
_dpu_plane_get_qos_lut() is not specific to just dpu_plane. It can take any fill level and return the LUT matching it. This can be used even for other modules like dpu_writeback. Move _dpu_plane_get_qos_lut() to the common dpu_hw_util file and rename it to _dpu_hw_get_qos_lut(). Signed-off-by:
-
Abhinav Kumar authored
add dpu encoder APIs to prepare and cleanup writeback job for the writeback encoder. These shall be invoked from the prepare_wb_job/cleanup_wb_job hooks of the drm_writeback framework. changes in v3: - none Signed-off-by:
-
Abhinav Kumar authored
Make changes to dpu_encoder to support virtual encoder needed to support writeback for dpu. changes in v4: - squash dpu_encoder pieces from [1] changes in v5: - none changes in v6: - fix the comment about intf_idx and wb_idx - add the condition for valid phys_enc with intf_idx and wb_idx [1] https://patchwork.freedesktop.org/patch/483099/?series=102964&rev=2Signed-off-by:
-
Abhinav Kumar authored
Add an API to reset the encoder related hw blocks to ensure a proper teardown of the pipeline. At the moment this is being used only for the writeback encoder but eventually we can start using this for all interfaces. changes in v4: - none Signed-off-by:
-
Abhinav Kumar authored
Add changes to support writeback module in the dpu_hw_ctl interface. changes in v4: - fix the copyright year order Signed-off-by:
-
Abhinav Kumar authored
Add writeback blocks to DPU resource manager so that the encoders can directly request them through RM. changes in v4: - absorb dpu_rm.h header change from [1] - since its a trivial change absorbed from an approved patch, preserving the previous ack on this [1] https://patchwork.freedesktop.org/patch/483099/?series=102964&rev=2Signed-off-by:
-
Abhinav Kumar authored
Add the dpu_hw_wb abstraction to program registers related to the writeback block. These will be invoked once all the configuration is set and ready to be programmed to the registers. changes in v3: - start using the common struct dpu_hw_cdp_cfg - leave a comment about DPU non-DPU_WB_QOS_8LVL chipsets Signed-off-by:
-
Abhinav Kumar authored
Rename dpu_hw_pipe_cdp_cfg to dpu_hw_cdp_cfg and move it to dpu_hw_utils file so that other modules in addition to SSPP such as writeback can use it as all the fields can be used by writeback as well. Suggested-by:
-
Abhinav Kumar authored
Add a reset_intf_cfg operation for dpu_hw_ctl to reset the entire CTL path by disabling each component namely layer mixer, 3d-merge and interface blocks. changes in v3: - none Signed-off-by:
-
Abhinav Kumar authored
Add writeback blocks to the sm8250 DPU hardware catalog. Other chipsets support writeback too but add it to sm8250 to prototype the feature so that it can be easily extended to other chipsets. changes in v4: - fix the copyright year order Signed-off-by:
-
Abhinav Kumar authored
For vendors drivers which pass an already allocated and initialized encoder especially for cases where the encoder hardware is shared OR the writeback encoder shares the resources with the rest of the display pipeline introduce a new API, drm_writeback_connector_init_with_encoder() which expects an initialized encoder as a parameter and only sets up the writeback connector. changes in v5: - fix the encoder doc to indicate that its not valid for users of drm_writeback_connector_init_with_encoder() Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Patchwork: https://patchwork.freedesktop.org/patch/483500/ Link: https://lore.kernel.org/r/1650984096-9964-3-git-send-email-quic_abhinavk@quicinc.comSigned-off-by:
-
Abhinav Kumar authored
Clients of drm_writeback_connector_init() initialize the possible_crtcs and then invoke the call to this API. To simplify things, allow passing possible_crtcs as a parameter to drm_writeback_connector_init() and make changes to the other drm drivers to make them compatible with this change. changes in v2: - split the changes according to their functionality changes in v3: - allow passing possible_crtcs for existing users of drm_writeback_connector_init() - squash the vendor changes into the same commit so that each patch in the series can compile individually changes in v4: - keep only changes related to possible_crtcs - add line breaks after ARRAY_SIZE - stop using temporary variables for possible_crtcs changes in v5: - None changes in v6: - None changes in v7: - wrap long lines to match the coding style of existing drivers - Fix indentation and remove parenthesis where not needed - use u32 instead of uint32_t for possible_crtcs Signed-off-by: -
Vinod Polimera authored
drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3 Call trace: dpu_vbif_init_memtypes+0x40/0xb8 dpu_runtime_resume+0xcc/0x1c0 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x134/0x258 __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x36c/0x49c __pm_runtime_resume+0x80/0xb0 dpu_core_irq_uninstall+0x30/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by:
-
Lv Ruyi authored
The irq_of_parse_and_map() function returns 0 on failure, and does not return a negative value anyhow, so never enter this conditional branch. Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483291/ Link: https://lore.kernel.org/r/20220425090947.3498897-1-lv.ruyi@zte.com.cnSigned-off-by:
-
Bjorn Andersson authored
It's typical for the bootloader to bring up the display for showing a boot splash or efi framebuffer. But in some cases the kernel driver ends up only partially configuring (in particular) the DPU, which might result in e.g. that two different data paths attempts to push data to the interface - with resulting graphical artifacts. Naturally the end goal would be to inherit the bootloader's configuration and provide the user with a glitch free handover from the boot configuration to a running DPU. But as implementing seamless transition from the bootloader configuration to the running OS will be a considerable effort, start by simply resetting the entire MDSS to its power-on state, to avoid the partial configuration. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
-
Bjorn Andersson authored
Add an optional reference to the MDSS_CORE reset, which when specified can be used by the implementation to reset the hardware blocks. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Vinod Polimera authored
- Some DPU versions support inline rot90. It is supported only for limited amount of UBWC formats. - There are two versions of inline rotators, v1 (present on sm8250 and sm7250) and v2 (sc7280). These versions differ in the list of supported formats and in the scaler possibilities. Co-developed-by:
Kalyan Thota <quic_kalyant@quicinc.com> Signed-off-by:
-
Vinod Polimera authored
Check if the dpu format is supported or not using dpu_find_format. Co-developed-by:
-
Marijn Suijten authored
As per the specification of DPU_CTL_ACTIVE_CFG the configuration of active blocks should be proactively specified, and the pingpong block is no different. The downstream display driver [1] confirms this by also calling bind_pingpong_blk on CTL_ACTIVE_CFG. Note that this else-if is always entered, as setup_intf_cfg - unlike this mainline dpu driver that combines both behind the same function pointer - is left NULL in favour of using setup_intf_cfg_v1 when CTL_ACTIVE_CFG is set. This solves continuous timeouts on at least the Qualcomm sm6125 SoC: [drm:dpu_encoder_frame_done_timeout:2091] [dpu error]enc31 frame done timeout [drm:_dpu_encoder_phys_cmd_handle_ppdone_timeout.isra.0] *ERROR* id:31 pp:0 kickoff timeout 0 cnt 1 koff_cnt 1 [drm:dpu_encoder_phys_cmd_prepare_for_kickoff] *ERROR* failed wait_for_idle: id:31 ret:-110 pp:0 In the same way this pingpong block should also be unbound followed by an interface flush when the encoder is disabled, according to the downstream display driver [2]. [1]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder_phys_cmd.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n167 [2]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n2986Signed-off-by:Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by:
-
Dmitry Baryshkov authored
To remove possible confusion between (old) INTF_EDP and newer INTF_DP, stop using INTF_EDP in DPU's code. Until the 8x74/8x84 SoCs are supported by DPU driver, there is no point in using INTF_EDP. Signed-off-by:
-
Dmitry Baryshkov authored
DPU driver never supported INTF_EDP, so let's drop the obsolete comment. If at some point 8x74/8x84's INTF_EDP is ported to DPU driver, corresponding handling will have to be ported too. Until that time, the comment serves no purpose. Signed-off-by:
-
Dmitry Baryshkov authored
This enum value does not correspond to any of actual interface types, it's not used by the driver, and the value of INTF_WB is greater than INTF_TYPE_MAX. Thus this symbol serves no purpose and can be removed. Signed-off-by:
-
Dmitry Baryshkov authored
Based on the discussions on the mailing list, document enum dpu_intf_type and it's controversial fields: INTF_DP and INTF_EDP. INTF_EDP is used for older eDP interface found on msm8x74/msm8x84 INTF_DP is used for both eDP and DP interfaces handled by the msm/dp driver. The DPU driver does not make a difference between them. Signed-off-by:
-
Dmitry Baryshkov authored
Pass IRQ number directly rather than passing an index in the dpu_encoder's irq table. Reviewed-by:
-
Dmitry Baryshkov authored
Remove additional indirection: specify IRQ callbacks and IRQ indices directly rather than through the pointer in the irq structure. For each IRQ we have a constant IRQ callback. This change simplifies code review as the reader no longer needs to remember which function is called. Signed-off-by:
-
Dmitry Baryshkov authored
Get rid of dpu_encoder_helper_register_irq/unregister_irq helpers, call dpu_core_register/unregister_callback directly, without surrounding them with helpers. Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by:
-
Dmitry Baryshkov authored
DPU interrupts code allows multiple callbacks per interrut. In reality none of the interrupts is shared between blocks (and will probably never be). Drop support for registering multiple callbacks per interrupt to simplify interrupt handling code. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Dmitry Baryshkov authored
The argument clear of the function dpu_core_irq_read() is always true. Remove it. Reviewed-by:
-
Dmitry Baryshkov authored
Remove extra dpu_irq_* wrappers from dpu_kms.c, merge them directly into dpu_core_irq_* functions. Reviewed-by:
-
- 27 Apr, 2022 2 commits
-
-
Tom Rix authored
Smatch reports this issue msm_ringbuffer.c:43:36: warning: symbol 'msm_sched_ops' was not declared. Should it be static? msm_sched_ops is only used in msm_ringbuffer.c so change its storage-class specifier to static. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
-
Abhinav Kumar authored
Remove unused MSM_DISPLAY_CAP_HOT_PLUG and MSM_DISPLAY_CAP_EDID macros from msm_drv.h. Even if we need these, there are drm equivalent ones present. Reported-by:
-
