- 04 Feb, 2021 40 commits
-
-
Joao Martins authored
Add KVM_XEN_ATTR_TYPE_SHARED_INFO to allow hypervisor to know where the guest's shared info page is. Signed-off-by:
Joao Martins <joao.m.martins@oracle.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk>
-
David Woodhouse authored
There aren't a lot of differences for the things that the kernel needs to care about, but there are a few. Signed-off-by: -
David Woodhouse authored
Signed-off-by: -
Joao Martins authored
This will be used to set up shared info pages etc. Signed-off-by:
-
David Woodhouse authored
The code paths for Xen support are all fairly lightweight but if we hide them behind this, they're even *more* lightweight for any system which isn't actually hosting Xen guests. Signed-off-by: -
David Woodhouse authored
This is already more complex than the simple memcpy it originally had. Move it to xen.c with the rest of the Xen support. Signed-off-by: -
Joao Martins authored
Disambiguate Xen vs. Hyper-V calls by adding 'orl $0x80000000, %eax' at the start of the Hyper-V hypercall page when Xen hypercalls are also enabled. That bit is reserved in the Hyper-V ABI, and those hypercall numbers will never be used by Xen (because it does precisely the same trick). Switch to using kvm_vcpu_write_guest() while we're at it, instead of open-coding it. Signed-off-by: -
Joao Martins authored
Add a new exit reason for emulator to handle Xen hypercalls. Since this means KVM owns the ABI, dispense with the facility for the VMM to provide its own copy of the hypercall pages; just fill them in directly using VMCALL/VMMCALL as we do for the Hyper-V hypercall page. This behaviour is enabled by a new INTERCEPT_HCALL flag in the KVM_XEN_HVM_CONFIG ioctl structure, and advertised by the same flag being returned from the KVM_CAP_XEN_HVM check. Rename xen_hvm_config() to kvm_xen_write_hypercall_page() and move it to the nascent xen.c while we're at it, and add a test case. Signed-off-by:
-
David Woodhouse authored
The address we give to memdup_user() isn't correctly tagged as __user. This is harmless enough as it's a one-off use and we're doing exactly the right thing, but fix it anyway to shut the checker up. Otherwise it'll whine when the (now legacy) code gets moved around in a later patch. Signed-off-by: -
Joao Martins authored
Xen usually places its MSR at 0x40000000 or 0x40000200 depending on whether it is running in viridian mode or not. Note that this is not ABI guaranteed, so it is possible for Xen to advertise the MSR some place else. Given the way xen_hvm_config() is handled, if the former address is selected, this will conflict with Hyper-V's MSR (HV_X64_MSR_GUEST_OS_ID) which unconditionally uses the same address. Given that the MSR location is arbitrary, move the xen_hvm_config() handling to the top of kvm_set_msr_common() before falling through. Signed-off-by:
-
Ben Gardon authored
Make the last few changes necessary to enable the TDP MMU to handle page faults in parallel while holding the mmu_lock in read mode. Reviewed-by:
Peter Feiner <pfeiner@google.com> Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-24-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
When clearing TDP MMU pages what have been disconnected from the paging structure root, set the SPTEs to a special non-present value which will not be overwritten by other threads. This is needed to prevent races in which a thread is clearing a disconnected page table, but another thread has already acquired a pointer to that memory and installs a mapping in an already cleared entry. This can lead to memory leaks and accounting errors. Reviewed-by:
-
Ben Gardon authored
When the TDP MMU is allowed to handle page faults in parallel there is the possiblity of a race where an SPTE is cleared and then imediately replaced with a present SPTE pointing to a different PFN, before the TLBs can be flushed. This race would violate architectural specs. Ensure that the TLBs are flushed properly before other threads are allowed to install any present value for the SPTE. Reviewed-by:
-
Ben Gardon authored
To prepare for handling page faults in parallel, change the TDP MMU page fault handler to use atomic operations to set SPTEs so that changes are not lost if multiple threads attempt to modify the same SPTE. Reviewed-by:
-
Ben Gardon authored
Move the work of adding and removing TDP MMU pages to/from "secondary" data structures to helper functions. These functions will be built on in future commits to enable MMU operations to proceed (mostly) in parallel. No functional change expected. Signed-off-by:
-
Ben Gardon authored
Add a read / write lock to be used in place of the MMU spinlock on x86. The rwlock will enable the TDP MMU to handle page faults, and other operations in parallel in future commits. Reviewed-by:
-
Ben Gardon authored
Safely rescheduling while holding a spin lock is essential for keeping long running kernel operations running smoothly. Add the facility to cond_resched rwlocks. CC: Ingo Molnar <mingo@redhat.com> CC: Will Deacon <will@kernel.org> Acked-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Waiman Long <longman@redhat.com> Acked-by:
-
Ben Gardon authored
Contention awareness while holding a spin lock is essential for reducing latency when long running kernel operations can hold that lock. Add the same contention detection interface for read/write spin locks. CC: Ingo Molnar <mingo@redhat.com> CC: Will Deacon <will@kernel.org> Acked-by:
-
Ben Gardon authored
rwlocks do not currently have any facility to detect contention like spinlocks do. In order to allow users of rwlocks to better manage latency, add contention detection for queued rwlocks. CC: Ingo Molnar <mingo@redhat.com> CC: Will Deacon <will@kernel.org> Acked-by:
-
Ben Gardon authored
In order to enable concurrent modifications to the paging structures in the TDP MMU, threads must be able to safely remove pages of page table memory while other threads are traversing the same memory. To ensure threads do not access PT memory after it is freed, protect PT memory with RCU. Protecting concurrent accesses to page table memory from use-after-free bugs could also have been acomplished using walk_shadow_page_lockless_begin/end() and READING_SHADOW_PAGE_TABLES, coupling with the barriers in a TLB flush. The use of RCU for this case has several distinct advantages over that approach. 1. Disabling interrupts for long running operations is not desirable. Future commits will allow operations besides page faults to operate without the exclusive protection of the MMU lock and those operations are too long to disable iterrupts for their duration. 2. The use of RCU here avoids long blocking / spinning operations in perfromance critical paths. By freeing memory with an asynchronous RCU API we avoid the longer wait times TLB flushes experience when overlapping with a thread in walk_shadow_page_lockless_begin/end(). 3. RCU provides a separation of concerns when removing memory from the paging structure. Because the RCU callback to free memory can be scheduled immediately after a TLB flush, there's no need for the thread to manually free a queue of pages later, as commit_zap_pages does. Fixes: 95fb5b02 ("kvm: x86/mmu: Support MMIO in the TDP MMU") Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Ben Gardon authored
In clear_dirty_pt_masked, the loop is intended to exit early after processing each of the GFNs with corresponding bits set in mask. This does not work as intended if another thread has already cleared the dirty bit or writable bit on the SPTE. In that case, the loop would proceed to the next iteration early and the bit in mask would not be cleared. As a result the loop could not exit early and would proceed uselessly. Move the unsetting of the mask bit before the check for a no-op SPTE change. Fixes: a6a0b05d ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Suggested-by:
-
Ben Gardon authored
Skip setting SPTEs if no change is expected. Reviewed-by:
-
Ben Gardon authored
Given certain conditions, some TDP MMU functions may not yield reliably / frequently enough. For example, if a paging structure was very large but had few, if any writable entries, wrprot_gfn_range could traverse many entries before finding a writable entry and yielding because the check for yielding only happens after an SPTE is modified. Fix this issue by moving the yield to the beginning of the loop. Fixes: a6a0b05d ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Reviewed-by:
-
Ben Gardon authored
In some functions the TDP iter risks not making forward progress if two threads livelock yielding to one another. This is possible if two threads are trying to execute wrprot_gfn_range. Each could write protect an entry and then yield. This would reset the tdp_iter's walk over the paging structure and the loop would end up repeating the same entry over and over, preventing either thread from making forward progress. Fix this issue by only yielding if the loop has made forward progress since the last yield. Fixes: a6a0b05d ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Reviewed-by:
-
Ben Gardon authored
The goal_gfn field in tdp_iter can be misleading as it implies that it is the iterator's final goal. It is really a target for the lowest gfn mapped by the leaf level SPTE the iterator will traverse towards. Change the field's name to be more precise. Signed-off-by:
-
Ben Gardon authored
The flushing and non-flushing variants of tdp_mmu_iter_cond_resched have almost identical implementations. Merge the two functions and add a flush parameter. Signed-off-by:
-
Ben Gardon authored
No functional change intended. Fixes: 29cf0f50 ("kvm: x86/mmu: NX largepage recovery for TDP MMU") Signed-off-by:
-
Ben Gardon authored
Factor out the code to handle a disconnected subtree of the TDP paging structure from the code to handle the change to an individual SPTE. Future commits will build on this to allow asynchronous page freeing. No functional change intended. Reviewed-by:
-
Ben Gardon authored
The KVM MMU caches already guarantee that shadow page table memory will be zeroed, so there is no reason to re-zero the page in the TDP MMU page fault handler. No functional change intended. Reviewed-by:
-
Ben Gardon authored
Add lockdep to __tdp_mmu_set_spte to ensure that SPTEs are only modified under the MMU lock. No functional change intended. Reviewed-by:
-
Ben Gardon authored
__tdp_mmu_set_spte is a very important function in the TDP MMU which already accepts several arguments and will take more in future commits. To offset this complexity, add a comment to the function describing each of the arguemnts. No functional change intended. Reviewed-by:
-
Ben Gardon authored
Currently the TDP MMU yield / cond_resched functions either return nothing or return true if the TLBs were not flushed. These are confusing semantics, especially when making control flow decisions in calling functions. To clean things up, change both functions to have the same return value semantics as cond_resched: true if the thread yielded, false if it did not. If the function yielded in the _flush_ version, then the TLBs will have been flushed. Reviewed-by:
-
Paolo Bonzini authored
Push the injection of #GP up to the callers, so that they can just use kvm_complete_insn_gp. Signed-off-by: -
Paolo Bonzini authored
kvm_dr6_valid and kvm_dr7_valid check that bits 63:32 are zero. Using them makes it easier to review the code for inconsistencies. Signed-off-by: -
Paolo Bonzini authored
Now that KVM is using static calls, calling vmx_vcpu_run and vmx_sync_pir_to_irr does not incur anymore the cost of a retpoline. Therefore there is no need anymore to handle EXIT_FASTPATH_REENTER_GUEST in vendor code. Signed-off-by: -
Vitaly Kuznetsov authored
Commit 181f4948 ("KVM: x86: fix CPUID entries returned by KVM_GET_CPUID2 ioctl") revealed that we're not testing KVM_GET_CPUID2 ioctl at all. Add a test for it and also check that from inside the guest visible CPUIDs are equal to it's output. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210129161821.74635-1-vkuznets@redhat.com> Signed-off-by:
-
Stephen Zhang authored
Given the common pattern: rmap_printk("%s:"..., __func__,...) we could improve this by adding '__func__' in rmap_printk(). Signed-off-by:Stephen Zhang <stephenzhangzsd@gmail.com> Message-Id: <1611713325-3591-1-git-send-email-stephenzhangzsd@gmail.com> Signed-off-by:
-
Krish Sadhukhan authored
Replace the hard-coded value for bit# 1 in EFLAGS, with the available #define. Signed-off-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Message-Id: <20210203012842.101447-2-krish.sadhukhan@oracle.com> Signed-off-by:
-
Michael Roth authored
Currently we save host state like user-visible host MSRs, and do some initial guest register setup for MSR_TSC_AUX and MSR_AMD64_TSC_RATIO in svm_vcpu_load(). Defer this until just before we enter the guest by moving the handling to kvm_x86_ops.prepare_guest_switch() similarly to how it is done for the VMX implementation. Additionally, since handling of saving/restoring host user MSRs is the same both with/without SEV-ES enabled, move that handling to common code. Suggested-by:
Michael Roth <michael.roth@amd.com> Message-Id: <20210202190126.2185715-4-michael.roth@amd.com> Signed-off-by:
-
Michael Roth authored
Now that the set of host user MSRs that need to be individually saved/restored are the same with/without SEV-ES, we can drop the .sev_es_restored flag and just iterate through the list unconditionally for both cases. A subsequent patch can then move these loops to a common path. Signed-off-by:
-
