- 27 Apr, 2017 40 commits
-
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 SCSI can call device_add_disk() several times for one request queue when a device in unbound and bound, creating new gendisk each time. This will lead to bdi being repeatedly registered and unregistered. This was not a big problem until commit 165a5e22 "block: Move bdi_unregister() to del_gendisk()" since bdi was only registered repeatedly (bdi_register() handles repeated calls fine, only we ended up leaking reference to gendisk due to overwriting bdi->owner) but unregistered only in blk_cleanup_queue() which didn't get called repeatedly. After 165a5e22 we were doing correct bdi_register() - bdi_unregister() cycles however bdi_unregister() is not prepared for it. So make sure bdi_unregister() cleans up bdi in such a way that it is prepared for a possible following bdi_register() call. An easy way to provoke this behavior is to enable CONFIG_DEBUG_TEST_DRIVER_REMOVE and use scsi_debug driver to create a scsi disk which immediately hangs without this fix. Fixes: 165a5e22Signed-off-by:
Jan Kara <jack@suse.cz> Tested-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@fb.com> (cherry picked from commit b6f8fec4) Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Acked-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
Brad Figg <brad.figg@canonical.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 Commit 6cd18e71 "block: destroy bdi before blockdev is unregistered." moved bdi unregistration (at that time through bdi_destroy()) from blk_release_queue() to blk_cleanup_queue() because it needs to happen before blk_unregister_region() call in del_gendisk() for MD. SCSI though will free up the device number from sd_remove() called through a maze of callbacks from device_del() in __scsi_remove_device() before blk_cleanup_queue() and thus similar races as described in 6cd18e71 can happen for SCSI as well as reported by Omar [1]. Moving bdi_unregister() to del_gendisk() works for MD and fixes the problem for SCSI since del_gendisk() gets called from sd_remove() before freeing the device number. This also makes device_add_disk() (calling bdi_register_owner()) more symmetric with del_gendisk(). [1] http://marc.info/?l=linux-block&m=148554717109098&w=2Tested-by:
Lekshmi Pillai <lekshmicpillai@in.ibm.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 So far we initialized bd_bdi only in bdget(). That is fine for normal bdev inodes however for the special case of the root inode of blockdev_superblock that function is never called and thus bd_bdi is left uninitialized. As a result bdev_evict_inode() may oops doing bdi_put(root->bd_bdi) on that inode as can be seen when doing: mount -t bdev none /mnt Fix the problem by initializing bd_bdi when first allocating the inode and then reinitializing bd_bdi in bdev_evict_inode(). Thanks to syzkaller team for finding the problem. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: b1d2dc56 ("block: Make blk_get_backing_dev_info() safe without open bdev") Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 When a device gets removed, block device inode unhashed so that it is not used anymore (bdget() will not find it anymore). Later when a new device gets created with the same device number, we create new block device inode. However there may be file system device inodes whose i_bdev still points to the original block device inode and thus we get two active block device inodes for the same device. They will share the same gendisk so the only visible differences will be that page caches will not be coherent and BDIs will be different (the old block device inode still points to unregistered BDI). Fix the problem by checking in bd_acquire() whether i_bdev still points to active block device inode and re-lookup the block device if not. That way any open of a block device happening after the old device has been removed will get correct block device inode. Tested-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 Iteration over partitions in del_gendisk() omits part0. Add bdev_unhash_inode() call for the whole device. Otherwise if the device number gets reused, bdev inode will be still associated with the old (stale) bdi. Tested-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 Move bdev_unhash_inode() after invalidate_partition() as invalidate_partition() looks up bdev and it cannot find the right bdev inode after bdev_unhash_inode() is called. Thus invalidate_partition() would not invalidate page cache of the previously used bdev. Also use part_devt() when calling bdev_unhash_inode() instead of manually creating the device number. Tested-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 blk_get_backing_dev_info() is now a simple dereference. Remove that function and simplify some code around that. Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 Currenly blk_get_backing_dev_info() is not safe to be called when the block device is not open as bdev->bd_disk is NULL in that case. However inode_to_bdi() uses this function and may be call called from flusher worker or other writeback related functions without bdev being open which leads to crashes such as: [113031.075540] Unable to handle kernel paging request for data at address 0x00000000 [113031.075614] Faulting instruction address: 0xc0000000003692e0 0:mon> t [c0000000fb65f900] c00000000036cb6c writeback_sb_inodes+0x30c/0x590 [c0000000fb65fa10] c00000000036ced4 __writeback_inodes_wb+0xe4/0x150 [c0000000fb65fa70] c00000000036d33c wb_writeback+0x30c/0x450 [c0000000fb65fb40] c00000000036e198 wb_workfn+0x268/0x580 [c0000000fb65fc50] c0000000000f3470 process_one_work+0x1e0/0x590 [c0000000fb65fce0] c0000000000f38c8 worker_thread+0xa8/0x660 [c0000000fb65fd80] c0000000000fc4b0 kthread+0x110/0x130 [c0000000fb65fe30] c0000000000098f0 ret_from_kernel_thread+0x5c/0x6c Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 Instead of storing backing_dev_info inside struct request_queue, allocate it dynamically, reference count it, and free it when the last reference is dropped. Currently only request_queue holds the reference but in the following patch we add other users referencing backing_dev_info. Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1659111 Currently, block device inodes stay around after corresponding gendisk hash died until memory reclaim finds them and frees them. Since we will make block device inode pin the bdi, we want to free the block device inode as soon as the device goes away so that bdi does not stay around unnecessarily. Furthermore we need to avoid issues when new device with the same major,minor pair gets created since reusing the bdi structure would be rather difficult in this case. Unhashing block device inode on gendisk destruction nicely deals with these problems. Once last block device inode reference is dropped (which may be directly in del_gendisk()), the inode gets evicted. Furthermore if the major,minor pair gets reallocated, we are guaranteed to get new block device inode even if old block device inode is not yet evicted and thus we avoid issues with possible reuse of bdi. Reviewed-by:
-
Masaki Ota authored
BugLink: http://bugs.launchpad.net/bugs/1662589 Devices identified as E7="73 03 28" use slightly modified version of V8 protocol, with lower count per electrode, different offsets, and different feature bits in OTP data. Fixes: aeaa881f ("Input: ALPS - set DualPoint flag for 74 03 28 devices") Signed-off-by:
Masaki Ota <masaki.ota@jp.alps.com> Acked-by:
Pali Rohar <pali.rohar@gmail.com> Tested-by:
Paul Donohue <linux-kernel@PaulSD.com> Tested-by:
Nick Fletcher <nick.m.fletcher@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> (backported from commit e7348396) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1683728Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Horia Geantă authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit 40c98cb5 upstream. RNG instantiation was previously fixed by commit 62743a41 ("crypto: caam - fix RNG init descriptor ret. code checking") while deinstantiation was not addressed. Since the descriptors used are similar, in the sense that they both end with a JUMP HALT command, checking for errors should be similar too, i.e. status code 7000_0000h should be considered successful. Fixes: 1005bccd ("crypto: caam - enable instantiation of all RNG4 state handles") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit c25f8064 upstream. Commit dda45f70 ("MIPS: Switch to the irq_stack in interrupts") changed both the normal and vectored interrupt handlers. Unfortunately the vectored version, "except_vec_vi_handler", was incorrectly modified to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to the vectored handler that has been set up. This is ok for many platforms which set the vectored handler to plat_irq_dispatch anyway, but will cause problems with platforms that use other handlers. Fixes: dda45f70 ("MIPS: Switch to the irq_stack in interrupts") Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15110/Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit 3cc3434f upstream. Since do_IRQ is now invoked on a separate IRQ stack, we select HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly from irq_exit(), rather than requiring do_softirq_own_stack. Signed-off-by:
Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14744/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit dda45f70 upstream. When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit 510d8636 upstream. The SAVE_SOME macro is used to save the execution context on all exceptions. If an exception occurs while executing user code, the stack is switched to the kernel's stack for the current task, and register $28 is switched to point to the current_thread_info, which is at the bottom of the stack region. If the exception occurs while executing kernel code, the stack is left, and this change ensures that register $28 is not updated. This is the correct behaviour when the kernel can be executing on the separate irq stack, because the thread_info will not be at the base of it. With this change, register $28 is only switched to it's kernel conventional usage of the currrent thread info pointer at the point at which execution enters kernel space. Doing it on every exception was redundant, but OK without an IRQ stack, but will be erroneous once that is introduced. Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit d42d8d10 upstream. Within unwind stack, check if the stack pointer being unwound is within the CPU's irq_stack and if so use that page rather than the task's stack page. Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit fe8bd18f upstream. Allocate a per-cpu irq stack for use within interrupt handlers. Also add a utility function on_irq_stack to determine if a given stack pointer is within the irq stack for that cpu. Signed-off-by:
-
Rafał Miłecki authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit bd5d2131 upstream. After parsing TRX we should skip to the first block placed behind it. Our code was working only with TRX with length not aligned to the blocksize. In other cases (length aligned) it was missing the block places right after TRX. This fixes calculation and simplifies the comment. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Janusz Dziedzic authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit de288e36 upstream. In the case of bounced ep0 requests, we must delay DMA operation until after ->complete() otherwise we might overwrite contents of req->buf. This caused problems with RNDIS gadget. Signed-off-by:
Janusz Dziedzic <januszx.dziedzic@intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit 8f68d591 upstream. On Baytrail, we manually calculate busyness over the evaluation interval to avoid issues with miscaluations with RC6 enabled. However, it turns out that the DOWN_EI interrupt generator is completely bust - it operates in two modes, continuous or never. Neither of which are conducive to good behaviour. Stop unmask the DOWN_EI interrupt and just compute everything from the UP_EI which does seem to correspond to the desired interval. v2: Fixup gen6_rps_pm_mask() as well v3: Inline vlv_c0_above() to combine the now identical elapsed calculation for up/down and simplify the threshold testing Fixes: 43cf3bf0 ("drm/i915: Improved w/a for rps on Baytrail") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-1-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170313170617.31564-1-chris@chris-wilson.co.uk (cherry picked from commit e0e8c7cb) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Mika Kuoppala authored
BugLink: http://bugs.launchpad.net/bugs/1683728 commit 34dc8993 upstream. Certain Baytrails, namely the 4 cpu core variants, have been plaqued by spurious system hangs, mostly occurring with light loads. Multiple bisects by various people point to a commit which changes the reclocking strategy for Baytrail to follow its bigger brethen: commit 8fb55197 ("drm/i915: Agressive downclocking on Baytrail") There is also a review comment attached to this commit from Deepak S on avoiding punit access on Cherryview and thus it was excluded on common reclocking path. By taking the same approach and omitting the punit access by not tweaking the thresholds when the hardware has been asked to move into different frequency, considerable gains in stability have been observed. With J1900 box, light render/video load would end up in system hang in usually less than 12 hours. With this patch applied, the cumulative uptime has now been 34 days without issues. To provoke system hang, light loads on both render and bsd engines in parallel have been used: glxgears >/dev/null 2>/dev/null & mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4 So far, author has not witnessed system hang with above load and this patch applied. Reports from the tenacious people at kernel bugzilla are also promising. Considering that the punit access frequency with this patch is considerably less, there is a possibility that this will push the, still unknown, root cause past the triggering point on most loads. But as we now can reliably reproduce the hang independently, we can reduce the pain that users are having and use a static thresholds until a root cause is found. v3: don't break debugfs and simplification (Chris Wilson) References: https://bugzilla.kernel.org/show_bug.cgi?id=109051 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: fritsch@xbmc.org Cc: miku@iki.fi Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> CC: Michal Feix <michal@feix.cz> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Deepak S <deepak.s@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 6067a27d) Signed-off-by:
-
Andrey Vagin authored
BugLink: http://bugs.launchpad.net/bugs/1672144 The previous idea was to check whether a net namespace is in net_exit_list or not. It doesn't work, because net->exit_list is used in __register_pernet_operations and __unregister_pernet_operations where all namespaces are added to a temporary list to make cleanup in a error case, so list_empty(&net->exit_list) always returns false. Reported-by:
Mantas Mikulėnas <grawity@gmail.com> Fixes: 002d8a1a ("net: skip genenerating uevents for network namespaces that are exiting") Signed-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net> (back ported from commit 91864f58) Signed-off-by:
Marcelo Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
Ming Lei authored
BugLink: http://bugs.launchpad.net/bugs/1682215 If the last bvec of the 1st bio and the 1st bvec of the next bio are physically contigious, and the latter can be merged to last segment of the 1st bio, we should think they don't violate sg gap(or virt boundary) limit. Both Vitaly and Dexuan reported lots of unmergeable small bios are observed when running mkfs on Hyper-V virtual storage, and performance becomes quite low. This patch fixes that performance issue. The same issue should exist on NVMe, since it sets virt boundary too. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reported-by:
Dexuan Cui <decui@microsoft.com> Tested-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Jacob Pan authored
BugLink: https://bugs.launchpad.net/bugs/1591641 Commit 3105f234 replaced module cpu id table with a cpu feature check, which is logically correct. But we need the module device table to allow module auto loading. Cc: stable@vger.kernel.org # 4.8 Fixes:3105f234 thermal/powerclamp: correct cpu support check Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> (cherry picked from commit ec638db8) Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
-
Eric Ernst authored
BugLink: https://bugs.launchpad.net/bugs/1591641 Initial logic for checking CPU match resulted in OR of CPU features rather than the intended AND. Updated to use boot_cpu_has macro rather than x86_match_cpu. In addition, MWAIT is the only required CPU feature for idle injection to work. Drop other feature requirements since they are only needed for optimal efficiency. CC: stable@vger.kernel.org #v4.7 Signed-off-by:
Eric Ernst <eric.ernst@linux.intel.com> Acked-by:
-
Jacob Pan authored
BugLink: https://bugs.launchpad.net/bugs/1591641 Powerclamp works by aligning idle time to achieve package level idle states, aka cstates. As long as one of the package cstates is available, synchronized idle injection is meaningful. This patch replaces the CPU whitelist with CPU feature and package cstate counter check such that we don't have to modify this whitelist for every new CPU. Signed-off-by:
-
Shrirang Bagul authored
BugLink: https://bugs.launchpad.net/bugs/1682103 This patch initializes the bootime in struct st_sensor_settings for lps22hb sensor. Without this, sensor channels read from sysfs always report stale values. Signed-off-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> (backported from commit 51f528a1) Signed-off-by:
-
Hans de Goede authored
BugLink: http://bugs.launchpad.net/bugs/1667323 Revert commit 6276e53f (ACPI / video: Add force_native quirk for HP Pavilion dv6). In the commit message for the quirk this revert removes I wrote: "Note that there are quite a few HP Pavilion dv6 variants, some woth ATI and some with NVIDIA hybrid gfx, both seem to need this quirk to have working backlight control. There are also some versions with only Intel integrated gfx, these may not need this quirk, but it should not hurt there." Unfortunately that seems wrong, I've already received 2 reports of this commit causing regressions on some dv6 variants (at least one of which actually has a nvidia GPU). So it seems that HP has made a mess here by using the same model-name both in marketing and in the DMI data for many different variants. Some of which need acpi_backlight=native for functional backlight control (as the quirk this commit reverts was doing), where as others are broken by it. So lets get back to the old sitation so as to avoid regressing on models which used to work without any kernel cmdline arguments before. Fixes: 6276e53f (ACPI / video: Add force_native quirk for HP Pavilion dv6) Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> (cherry picked from commit fd25ea29) Signed-off-by:
-
Jacob Pan authored
BugLink: https://bugs.launchpad.net/bugs/1591640 Kabylake is similar to Skylake in terms of RAPL. Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1682140Signed-off-by:
-
Chris Salls authored
BugLink: http://bugs.launchpad.net/bugs/1682140 commit cf01fb99 upstream. In the case that compat_get_bitmap fails we do not want to copy the bitmap to the user as it will contain uninitialized stack data and leak sensitive data. Signed-off-by:
Chris Salls <salls@cs.ucsb.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Huacai Chen authored
BugLink: http://bugs.launchpad.net/bugs/1682140 commit 0115f6cb upstream. On VTLB+FTLB platforms (such as Loongson-3A R2), FTLB's pagesize is usually configured the same as PAGE_SIZE. In such a case, Huge page entry is not suitable to write in FTLB. Unfortunately, when a huge page is created, its page table entries haven't created immediately. Then the TLB refill handler will fetch an invalid page table entry which has no "HUGE" bit, and this entry may be written to FTLB. Since it is invalid, TLB load/store handler will then use tlbwi to write the valid entry at the same place. However, the valid entry is a huge page entry which isn't suitable for FTLB. Our solution is to modify build_huge_handler_tail. Flush the invalid old entry (whether it is in FTLB or VTLB, this is in order to reduce branches) and use tlbwr to write the valid new entry. Signed-off-by:
Rui Wang <wangr@lemote.com> Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15754/Signed-off-by:
-
Hauke Mehrtens authored
BugLink: http://bugs.launchpad.net/bugs/1682140 commit 6ef90877 upstream. Commit 08b3c894 ("MIPS: lantiq: Disable xbar fpi burst mode") accidentally requested the resources from the pmu address region instead of the xbar registers region, but the check for the return value of request_mem_region() was wrong. Commit 98ea51cb ("MIPS: Lantiq: Fix another request_mem_region() return code check") fixed the check of the return value of request_mem_region() which made the kernel panics. This patch now makes use of the correct memory region for the cross bar. Fixes: 08b3c894 ("MIPS: lantiq: Disable xbar fpi burst mode") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org> Cc: james.hogan@imgtec.com Cc: arnd@arndb.de Cc: sergei.shtylyov@cogentembedded.com Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15751Signed-off-by:
-
Paul Burton authored
BugLink: http://bugs.launchpad.net/bugs/1682140 commit 4b5347a2 upstream. When building for microMIPS we need to ensure that the assembler always knows that there is code at the target of a branch or jump. Recent toolchains will fail to link a microMIPS kernel when this isn't the case due to what it thinks is a branch to non-microMIPS code. mips-mti-linux-gnu-ld kernel/built-in.o: .spinlock.text+0x2fc: Unsupported branch between ISA modes. mips-mti-linux-gnu-ld final link failed: Bad value This is due to inline assembly labels in spinlock.h not being followed by an instruction mnemonic, either due to a .subsection pseudo-op or the end of the inline asm block. Fix this with a .insn direction after such labels. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15325/Signed-off-by:
-
John Crispin authored
BugLink: http://bugs.launchpad.net/bugs/1682140 commit 7c5a3d81 upstream. There are two copy & paste errors in the definition of the 5GHz LNA and second ethernet pinmux. Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15328/Signed-off-by:
-
James Hogan authored
BugLink: http://bugs.launchpad.net/bugs/1682140 commit 2e6c7747 upstream. When a 32-bit kernel is configured to support MIPS64r6 (CPU_MIPS64_R6), MIPS_O32_FP64_SUPPORT won't be selected as it should be because MIPS32_O32 is disabled (o32 is already the default ABI available on 32-bit kernels). This results in userland FP breakage as CP0_Status.FR is read-only 1 since r6 (when an FPU is present) so __enable_fpu() will fail to clear FR. This causes the FPU emulator to get used which will incorrectly emulate 32-bit FPU registers. Force o32 fp64 support in this case by also selecting MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT. Fixes: 4e9d324d ("MIPS: Require O32 FP64 support for MIPS64 with O32 compat") Signed-off-by:
-
Heiko Carstens authored
BugLink: http://bugs.launchpad.net/bugs/1682140 commit d09c5373 upstream. Commit fd2d2b19 ("s390: get_user() should zero on failure") intended to fix s390's get_user() implementation which did not zero the target operand if the read from user space faulted. Unfortunately the patch has no effect: the corresponding inline assembly specifies that the operand is only written to ("=") and the previous value is discarded. Therefore the compiler is free to and actually does omit the zero initialization. To fix this simply change the contraint modifier to "+", so the compiler cannot omit the initialization anymore. Fixes: c9ca7841 ("s390/uaccess: provide inline variants of get_user/put_user") Fixes: fd2d2b19 ("s390: get_user() should zero on failure") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
