Skip to content

L
linux
Switch branch/tag
  1. 24 Oct, 2019 5 commits
    • Lyude Paul's avatar
      drm/dp_mst: Add probe_lock · 14692a36
      Lyude Paul authored 
      Currently, MST lacks locking in a lot of places that really should have
some sort of locking. Hotplugging and link address code paths are some
of the offenders here, as there is actually nothing preventing us from
running a link address probe while at the same time handling a
connection status update request - something that's likely always been
possible but never seen in the wild because hotplugging has been broken
for ages now (with the exception of amdgpu, for reasons I don't think
are worth digging into very far).

Note: I'm going to start using the term "in-memory topology layout" here
to refer to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.

Locking in these places is a little tougher then it looks though.
Generally we protect anything having to do with the in-memory topology
layout under &mgr->lock. But this becomes nearly impossible to do from
the context of link address probes due to the fact that &mgr->lock is
usually grabbed under random various modesetting locks, meaning that
there's no way we can just invert the &mgr->lock order and keep it
locked throughout the whole process of updating the topology.

Luckily there are only two workers which can modify the in-memory
topology layout: drm_dp_mst_up_req_work() and
drm_dp_mst_link_probe_work(), meaning as long as we prevent these two
workers from traveling the topology layout in parallel with the intent
of updating it we don't need to worry about grabbing &mgr->lock in these
workers for reads. We only need to grab &mgr->lock in these workers for
writes, so that readers outside these two workers are still protected
from the topology layout changing beneath them.

So, add the new &mgr->probe_lock and use it in both
drm_dp_mst_link_probe_work() and drm_dp_mst_up_req_work(). Additionally,
add some more detailed explanations for how this locking is intended to
work to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Reviewed-by: default avatarSean Paul <sean@poorly.run>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-6-lyude@redhat.com
      14692a36
    • Lyude Paul's avatar
      drm/dp_mst: Handle UP requests asynchronously · 9408cc94
      Lyude Paul authored 
      Once upon a time, hotplugging devices on MST branches actually worked in
DRM. Now, it only works in amdgpu (likely because of how it's hotplug
handlers are implemented). On both i915 and nouveau, hotplug
notifications from MST branches are noticed - but trying to respond to
them causes messaging timeouts and causes the whole topology state to go
out of sync with reality, usually resulting in the user needing to
replug the entire topology in hopes that it actually fixes things.

The reason for this is because the way we currently handle UP requests
in MST is completely bogus. drm_dp_mst_handle_up_req() is called from
drm_dp_mst_hpd_irq(), which is usually called from the driver's hotplug
handler. Because we handle sending the hotplug event from this function,
we actually cause the driver's hotplug handler (and in turn, all
sideband transactions) to block on
drm_device->mode_config.connection_mutex. This makes it impossible to
send any sideband messages from the driver's connector probing
functions, resulting in the aforementioned sideband message timeout.

There's even more problems with this beyond breaking hotplugging on MST
branch devices. It also makes it almost impossible to protect
drm_dp_mst_port struct members under a lock because we then have to
worry about dealing with all of the lock dependency issues that ensue.

So, let's finally actually fix this issue by handling the processing of
up requests asyncronously. This way we can send sideband messages from
most contexts without having to deal with getting blocked if we hold
connection_mutex. This also fixes MST branch device hotplugging on i915,
finally!

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: default avatarSean Paul <sean@poorly.run>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-5-lyude@redhat.com
      9408cc94
    • Lyude Paul's avatar
      drm/dp_mst: Refactor pdt setup/teardown, add more locking · c485e2c9
      Lyude Paul authored 
      Since we're going to be implementing suspend/resume reprobing very soon,
we need to make sure we are extra careful to ensure that our locking
actually protects the topology state where we expect it to. Turns out
this isn't the case with drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt(), both of which change port->mstb without
grabbing &mgr->lock.

Additionally, since most callers of these functions are just using it to
teardown the port's previous PDT and setup a new one we can simplify
things a bit and combine drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt() into a single function:
drm_dp_port_set_pdt(). This function also handles actually ensuring that
we grab the correct locks when we need to modify port->mstb.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: default avatarSean Paul <sean@poorly.run>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-4-lyude@redhat.com
      c485e2c9
    • Lyude Paul's avatar
      drm/dp_mst: Remove PDT teardown in drm_dp_destroy_port() and refactor · d29333cf
      Lyude Paul authored 
      This will allow us to add some locking for port->* members, in
particular the PDT and ->connector, which can't be done from
drm_dp_destroy_port() since we don't know what locks the caller might be
holding.

Note that we already do this in delayed_destroy_work (renamed from
destroy_connector_work in this patch) for ports, we're just making it so
mstbs are also destroyed in this worker.

Changes since v2:
* Clarify commit message
Changes since v4:
* Clarify commit message more

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: default avatarSean Paul <sean@poorly.run>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-3-lyude@redhat.com
      d29333cf
    • Lyude Paul's avatar
      drm/dp_mst: Destroy MSTBs asynchronously · 7cb12d48
      Lyude Paul authored 
      When reprobing an MST topology during resume, we have to account for the
fact that while we were suspended it's possible that mstbs may have been
removed from any ports in the topology. Since iterating downwards in the
topology requires that we hold &mgr->lock, destroying MSTBs from this
context would result in attempting to lock &mgr->lock a second time and
deadlocking.

So, fix this by first moving destruction of MSTBs into
destroy_connector_work, then rename destroy_connector_work and friends
to reflect that they now destroy both ports and mstbs.

Note that even though this means that MSTBs will still be accessible for
a short period of time between their removal from the topology and
delayed destruction, we are still protected against referencing a MSTB
with a refcount of 0 since we use kref_get_unless_zero() in most places.

Changes since v1:
* s/destroy_connector_list/destroy_port_list/
  s/connector_destroy_lock/delayed_destroy_lock/
  s/connector_destroy_work/delayed_destroy_work/
  s/drm_dp_finish_destroy_branch_device/drm_dp_delayed_destroy_mstb/
  s/drm_dp_finish_destroy_port/drm_dp_delayed_destroy_port/
  - danvet
* Use two loops in drm_dp_delayed_destroy_work() - danvet
* Better explain why we need to do this - danvet
* Use cancel_work_sync() instead of flush_work() - flush_work() doesn't
  account for work requeing

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: default avatarSean Paul <sean@poorly.run>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-2-lyude@redhat.com
      7cb12d48
  3. 23 Oct, 2019 1 commit
  5. 22 Oct, 2019 3 commits
    • Dave Airlie's avatar
      Merge tag 'du-next-20191016' of git://linuxtv.org/pinchartl/media into drm-next · f1b4a921
      Dave Airlie authored 
      - R-Car DU support for R8A774B1 SoC
- R-Car DU fixes for H2 ES2.0 and later revisions
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015215116.GF19403@pendragon.ideasonboard.com
      f1b4a921
    • Dave Airlie's avatar
      Merge tag 'mediatek-drm-next-5.5' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next · 400e9134
      Dave Airlie authored 
      Mediatek DRM next for Linux 5.5

This include mipi_tx, dsi, and partial crtc for MT8183 SoC.
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>

From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1571103548.4416.6.camel@mtksdaap41
      400e9134
    • Dave Airlie's avatar
      Merge tag 'drm-intel-next-2019-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next · 89910e62
      Dave Airlie authored 
      UAPI Changes:

- Introduce a versioning of the i915-perf uapi (Lionel)
- Add support for perf configuration queries (Lionel)

  Allow listing perf configurations with IOCTL in addition
  to sysfs. This is useful in container usecases.

- Allow dynamic reconfiguration of the OA stream (Chris)

  Allows the OA stream to be reconfigured between
  batch buffers, giving greater flexibility in sampling.

- Allow holding preemption on filtered perf ctx

  Allow CAP_ADMIN to block pre-emption of a context
  to query performance counters without disturbances.

  Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932

Cross-subsystem Changes:

- drm-next backmerge for HDR DP changes
  https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html

Driver Changes:

- Add DC3CO sleep state for Tigerlake (Anshuman)
- Tigerlake BCS engine support engine relative MMIO (Daniele)
- Simplify the Tigerlake LRC register list for !RCS (Daniele)
- Read SAGV block time from PCODE on Tigerlake (James)
- Add 12 missing Tigerlake workarounds (Mika)
- Enable DDI/Port G for Tigerlake (Khaled)

- Avoid hang in tsg,vfe units by keeping l3 clocks ICL+(Mika)
- Fix Bugzilla #111966: Favor last VBT child device (Ville)
- Fix blue/black screen on boot due to broken gamma (Swati)
- Add support of BT.2020 Colorimetry to DP MSA (Gwan-gyeong)
- Attach colorspace property to DP connector (Gwan-gyeong)
- Attach HDR metadata property to DP connector (Gwan-gyeong)
- Base intel_memory_region support prep for local memory (Matt A)
- Introduce Jasper Lake PCH (Matt R)
- Support multiple GPUs in PMU (Tvrtko)
- Fix MST oops due to MSA changes (Ville)
- Refuse modes with hdisplay==4096 on pre-HSW DP (Ville)
- Correct the PCH type in irq postinstall for JSP (Vivek)
- Save Master transcoder in slave's crtc_state for Transcoder Port Sync (Manasi)
- Enable TRANSCODER PORT SYNC for tiled displays across separate ports (Manasi)
- HW state readout for transcoder port sync config (Manasi)
- Enable master-slaves in trans port sync (Manasi)
- In port sync mode disable slaves first then master (Manasi)
- Fix port checks for MST support on gen >= 11 (Lucas)

- Flush submission tasklet before waiting/retiring (Chris)
- Flush tasklet submission before sleeping on i915_request_wait (Chris)
- Object pin reference counting fixes (Chris, Matt A)
- Clear semaphore immediately upon ELSP promotion (Chris)
- Child device size remains unchanged through VBT 229 (Matt R)
- Restore dropped 'interruptible' flag on retiring requests (Chris)
- Treat a busy timeline as 'active' while waiting (Chris)
- Clean up struct_mutex from perf (Chris)
- Update locking around execlists->active (Chris)
- Mark up expected execlist state during reset (Chris)
- Remove cursor use of properties for coordinates (Maarten)
- Only mark incomplete requests as -EIO on cancelling (Chris)
- Add an rcu_barrier option to i915_drop_caches (Chris)
- Replace perf global wakeref tracking with engine-pm (Chris)
- Prevent merging requests with conflicting flags (Chris)
- Allow for CS OA configs to be created lazily (Lionel)
- Implement active wait for noa configurations (Lionel)
- Execute OA configuration from command stream (Lionel)
- Prefer using the pinned_ctx for emitting delays on config (Chris)
- Port C's hotplug interrupt is associated with TC1 bits (Vivek, Matt R)
- Extend program of VSC Header and DB for Colorimetry Format (Gwan-gyeong)
- Fine-tune timeslicing of contexts (Chris)
- Do initial mocs configuration directly (Chris)
- Fix uninitialized variable on PMU error path (Tvrtko)
- Don't disable interrupts independently of the locking (Sebastian)
- Eliminate struct_mutext from GVT (Chris)

- Move perf types to their own header (Lionel)
- Drop list of perf streams (always size 1) (Lionel)
- Store the perf associated engine of a stream (Lionel)
- Make array hw_engine_mask static (Colin)
- Prefer shortest path to RPM/perf/GT instead of dev_priv (Chris, Tvrtko)
- Virtual request submission fixes (Chris)
- Selftest/CI improvements (Chris)
- Fix Kconfig indentation (Krzysztof)
- Give engine->kernel_context distinct timeline lock classes (Chris)
- Fix null pointer deref on selftest error path (Colin)
- Select DPLL's via mask (Matt R)
- Introduce and use intel_atomic_crtc_state_for_each_plane_state (Maarten)
- Use intel_plane_state in prepare and cleanup plane_fb (Maarten)
- Remove begin/finish_crtc_commit (Maarten)
- Move SAGV block time to dev_priv (James)
- Avoid polluting the i915_oa_config with error pointers (Chris)
- Squelch display kerneldoc warnings (Chris)
- Assert tasklet is locked for process_csb() (Chris)
- Switch to using DP_MSA_MISC_* defines (Ville)
- Stop using drm_atomic_helper_check_planes() (Ville)
- Make .modeset_calc_cdclk() mandatory (Ville)
- Use drm_rect_translate_to()/drm_rect_init() (Ville)
- Refactor timestamping constants update (Ville)
- Switch intel_legacy_cursor_update() to intel_ types (Ville)
- Prepare the connector/encoder mask readout for hw vs. uapi state split (Ville)
- Prepare the mode readout for hw vs. uapi state split (Ville)
- Move swizzle_bit under i915_ggtt (Chris)
- Improve microcontrollers documentation (Daniele)
- Move the cursor rotation handling into intel_cursor_check_surface() (Ville)
- Cleanups to pipe code (Ville)
- Shrink eDRAM ways/sets arrays for code size (Ville)
- Cleanups to HDCP2 timeout code (Ville)
- Restore full symmetry in i915_driver_modeset_probe/remove (Janusz)
- Simplify setting of ddi_io_power_domain (Lucas)
- Add pipe id/name to pipe mismatch logs (Lucas)
- Prettify MST debug message (Lucas)
- Extract GT ring management to separate files (Andi)
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021180337.GA24338@jlahtine-desk.ger.corp.intel.com
      89910e62
  7. 21 Oct, 2019 2 commits
  9. 20 Oct, 2019 8 commits
  11. 19 Oct, 2019 21 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7