- 16 Feb, 2023 1 commit
-
-
Feng Tang authored
Many platforms have feature of adjacent cachelines prefetch, when it is enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if one is fetched to cache, the other one could likely be fetched too, which sort of extends the cacheline size to double, thus the false sharing could happens in adjacent cachelines. 0Day has captured performance changed related with this [1], and some commercial software explicitly makes its hot global variables 128 bytes aligned (2 cache lines) to avoid this kind of extended false sharing. So add an option "--double-cl" for 'perf c2c report' to show false sharing in double cache line granularity, which acts just like the cacheline size is doubled. There is no change to c2c record. The hardware events of shared cacheline are still per cacheline, and this option just changes the granularity of how events are grouped and displayed. In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case on old kernel): ---------------------------------------------------------------------- 26 31 2 0 0 0 0xffff888103ec6000 ---------------------------------------------------------------------- 35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm 6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge 25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm 19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge 9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge 3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are listed together to give users a hint of extended false sharing. [1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/ Committer notes: Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx Removed -a, leaving just as --double-cl, as this probably is not used so frequently and perhaps will be even auto-detected if we manage to record the MSR where this is configured. Reviewed-by:Andi Kleen <ak@linux.intel.com> Reviewed-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Feng Tang <feng.tang@intel.com> Tested-by:
Joe Mario <jmario@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 Feb, 2023 1 commit
-
-
Yang Jihong authored
When --overwrite and --max-size options of perf record are used together, a segmentation fault occurs. The following is an example: # perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1 [ perf record: Woken up 1 times to write data ] perf: Segmentation fault Obtained 12 stack frames. ./perf/perf(+0x197673) [0x55f99710b673] /lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f] ./perf/perf(+0x8eb40) [0x55f997002b40] ./perf/perf(+0x1f6882) [0x55f99716a882] ./perf/perf(+0x794c2) [0x55f996fed4c2] ./perf/perf(+0x7b7c7) [0x55f996fef7c7] ./perf/perf(+0x9074b) [0x55f99700474b] ./perf/perf(+0x12e23c) [0x55f9970a223c] ./perf/perf(+0x12e54a) [0x55f9970a254a] ./perf/perf(+0x7db60) [0x55f996ff1b60] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86] ./perf/perf(+0x7dfe9) [0x55f996ff1fe9] Segmentation fault (core dumped) backtrace of the core file is as follows: (gdb) bt #0 record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234 #1 record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242 #2 record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263 #3 process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618 #4 0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658, from=from@entry=0) at util/synthetic-events.c:1895 #5 0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658) at util/synthetic-events.c:1905 #6 0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997 #7 0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802 #8 0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258 #9 0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330 #10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384 #11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428 #12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562 The reason is that record__bytes_written accesses the freed memory rec->thread_data, The process is as follows: __cmd_record -> record__free_thread_data -> zfree(&rec->thread_data) // free rec->thread_data -> record__synthesize -> perf_event__synthesize_id_index -> process_synthesized_event -> record__write -> record__bytes_written // access rec->thread_data We add a member variable "thread_bytes_written" in the struct "record" to save the data size written by the threads. Fixes: 6d575816 ("perf record: Add support for limit perf output file size") Signed-off-by:Yang Jihong <yangjihong1@huawei.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.comSigned-off-by:
-
- 09 Feb, 2023 1 commit
-
-
Ian Rogers authored
The added perf_stat_merge_counters combines uncore counters. When metrics are enabled, the counts are merged into a metric_leader via the stat-shadow saved_value logic. As the leader now is passed an aggregated count, it leads to all counters being added together twice and counts appearing approximately doubled in metrics. This change disables the saved_value merging of counts for evsels that are merged. It is recommended that later changes remove the saved_value entirely as the two layers of aggregation in the code is confusing. Fixes: 942c5593 ("perf stat: Add perf_stat_merge_counters()") Reported-by:
Perry Taylor <perry.taylor@intel.com> Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
-
- 08 Feb, 2023 5 commits
-
-
Thomas Richter authored
I have downloaded linux-next and build the perf tool using # make LIBPFM4=1 to have libpfm4 support built into perf. The build fails: # make LIBPFM4=1 .... INSTALL libbpf_headers CC util/pfm.o util/pfm.c: In function ‘print_libpfm_event’: util/pfm.c:189:9: error: too many arguments to function ‘print_cb->print_event’ 189 | print_cb->print_event(print_state, | ^~~~~~~~ util/pfm.c:220:25: error: too many arguments to function ‘print_cb->print_event’ 220 | print_cb->print_event(print_state, The build error is caused by commit d9dc8874 ("perf pmu-events: Remove now unused event and metric variables") which changes the function prototype of struct print_callbacks { ... void (*print_event)(...); --> last two parameters removed. }; but does not adjust the usage of this function prototype in util/pfm.c. In file util/pfm.c function print_event() is still invoked with 13 parameters instead of 11. The compile fails. When I adjust the file util/pfm.c as in this patch, the build works file. Please check this patch for correctness, I have just fixed the compile issue. Fixes: d9dc8874 ("perf pmu-events: Remove now unused event and metric variables") Signed-off-by:Thomas Richter <tmricht@linux.ibm.com> Tested-by:
-
Yicong Yang authored
On aarch64 CPU related events are not under event_source/devices/cpu/events, they're under event_source/devices/armv8_pmuv3_0/events on my machine. Using current auto-complete script will generate below error: [root@localhost bin]# perf stat -e ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory Fix this by not testing /sys/bus/event_source/devices/cpu/events on aarch64 machine. Fixes: 74cd5815 ("perf tool: Improve bash command line auto-complete for multiple events with comma") Reviewed-by:
James Clark <james.clark@arm.com> Signed-off-by:
Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Cc: prime.zeng@hisilicon.com Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.comSigned-off-by:
-
Namhyung Kim authored
The old kernel has a different type of the owner field in rwsem. We can check it using bpf_core_type_matches() builtin in clang but it also needs its own version check since it's available on recent versions. Signed-off-by:
-
Namhyung Kim authored
When there're many lock contentions in the system, people sometimes want to know who caused the contention, IOW who's the owner of the locks. The -o/--lock-owner option tries to follow the lock owners for the contended mutexes and rwsems from BPF, and then attributes the contention time to the owner instead of the waiter. It's a best effort approach to get the owner info at the time of the contention and doesn't guarantee to have the precise tracking of owners if it's changing over time. Currently it only handles mutex and rwsem that have owner field in their struct and it basically points to a task_struct that owns the lock at the moment. Technically its type is atomic_long_t and it comes with some LSB bits used for other meanings. So it needs to clear them when casting it to a pointer to task_struct. Also the atomic_long_t is a typedef of the atomic 32 or 64 bit types depending on arch which is a wrapper struct for the counter value. I'm not aware of proper ways to access those kernel atomic types from BPF so I just read the internal counter value directly. Please let me know if there's a better way. When -o/--lock-owner option is used, it goes to the task aggregation mode like -t/--threads option does. However it cannot get the owner for other lock types like spinlock and sometimes even for mutex. $ sudo ./perf lock con -abo -- ./perf bench sched pipe # Running 'sched/pipe' benchmark: # Executed 1000000 pipe operations between two processes Total time: 4.766 [sec] 4.766540 usecs/op 209795 ops/sec contended total wait max wait avg wait pid owner 403 565.32 us 26.81 us 1.40 us -1 Unknown 4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe 1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe 1 2.03 us 2.03 us 2.03 us 5068 chrome As you can see, the owner is unknown for the most cases. But if we filter only for the mutex locks, it'd more likely get the onwers. $ sudo ./perf lock con -abo -Y mutex -- ./perf bench sched pipe # Running 'sched/pipe' benchmark: # Executed 1000000 pipe operations between two processes Total time: 4.910 [sec] 4.910435 usecs/op 203647 ops/sec contended total wait max wait avg wait pid owner 2 15.50 us 8.29 us 7.75 us 1582852 sched-pipe 7 7.20 us 2.47 us 1.03 us -1 Unknown 1 6.74 us 6.74 us 6.74 us 1582851 sched-pipe Signed-off-by: -
Namhyung Kim authored
The previous change missed to set the con->save_callstack for the LOCK_AGGR_CALLER mode resulting in no caller information. Fixes: ebab2916 ("perf lock contention: Support filters for different aggregation") Signed-off-by:
-
- 06 Feb, 2023 8 commits
-
-
Athira Rajeev authored
Perf BPF filter test fails in environment where "kernel-debuginfo" is not installed. Test failure logs: <<>> 42: BPF filter : 42.1: Basic BPF filtering : Ok 42.2: BPF pinning : Ok 42.3: BPF prologue generation : FAILED! <<>> Enabling verbose option provided debug logs, which says debuginfo needs to be installed. Snippet of verbose logs: <<>> 42.3: BPF prologue generation : --- start --- test child forked, pid 28218 <<>> Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package. bpf_probe: failed to convert perf probe events Failed to add events selected by BPF test child finished with -1 ---- end ---- BPF filter subtest 3: FAILED! <<>> Here the subtest "BPF prologue generation" failed and logs shows debuginfo is needed. After installing kernel-debuginfo package, testcase passes. The "BPF prologue generation" subtest failed because, the do_test() returns TEST_FAIL without checking the error type returned by parse_events_load_bpf_obj(). parse_events_load_bpf_obj() can also return error of type -ENODATA incase kernel-debuginfo package is not installed. Fix this by adding check for -ENODATA error. Test result after the patch changes: Test failure logs: <<>> 42: BPF filter : 42.1: Basic BPF filtering : Ok 42.2: BPF pinning : Ok 42.3: BPF prologue generation : Skip (clang/debuginfo isn't installed or environment missing BPF support) <<>> Fixes: ba1fae43 ("perf test: Add 'perf test BPF'") Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/linux-perf-users/Y7bIk77mdE4j8Jyi@kernel.orgSigned-off-by:
-
Athira Rajeev authored
try_to_find_probe_trace_events() uses return error code as ENOENT in two places. First place is after open_debuginfo() when opening debuginfo fails and secondly, after when not finding the probe point. This function is invoked during BPF load and there are other exit points in this code path which returns ENOENT. This makes it difficult to understand the exact reason for exit. Patches changes the exit code from ENOENT to: - ENODATA when it fails to find debuginfo - ENODEV when it fails to find probe point Signed-off-by:
-
Kan Liang authored
The 'perf script' documentation is missing the fields option for Retire Latency. Add it. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230206162100.3329395-2-kan.liang@linux.intel.comSigned-off-by:
-
Kan Liang authored
In arch_perf_synthesize_sample_weight(), the retire_lat was mistakenly missed, add it. perf test -v "x86 sample parsing" 74: x86 Sample parsing : --- start --- test child forked, pid 72526 Samples differ at 'retire_lat' parsing failed for sample_type 0x1000000 test child finished with -1 ---- end ---- x86 Sample parsing: FAILED! Reported-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by:
-
Kan Liang authored
Add test for the new field for Retire Latency in the X86 specific test. Signed-off-by:
-
Athira Rajeev authored
The "bpf" tests fails in environment with missing libtraceevent support as below: # ./perf test 36 36: BPF filter : 36.1: Basic BPF filtering : FAILED! 36.2: BPF pinning : FAILED! 36.3: BPF prologue generation : FAILED! The environment has clang but missing the libtraceevent devel. Hence perf is compiled without libtraceevent support. Detailed logs: ./perf test -v "Basic BPF filtering" Failed to add BPF event syscalls:sys_enter_epoll_pwait bpf: tracepoint call back failed, stop iterate Failed to add events selected by BPF The bpf tests tris to add probe event which fails at "parse_events_add_tracepoint" function due to missing libtraceevent. Add check for "HAVE_LIBTRACEEVENT" in the "tests/bpf.c" before proceeding with the test. With the change, # ./perf test 36 36: BPF filter : 36.1: Basic BPF filtering : Skip (not compiled in or missing libtraceevent support) 36.2: BPF pinning : Skip (not compiled in or missing libtraceevent support) 36.3: BPF prologue generation : Skip (not compiled in or missing libtraceevent support) Signed-off-by:
Disha Goel <disgoel@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230131135001.54578-1-atrajeev@linux.vnet.ibm.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To sync with libbpf, etc. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull ELF fix from Al Viro: "One of the many equivalent build warning fixes for !CONFIG_ELF_CORE configs. Geert's is the earliest one I've been able to find" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: coredump: Move dump_emit_page() to kill unused warning
-
- 05 Feb, 2023 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes that resolve some reported problems. These include: - gadget driver fixes - dwc3 driver fix - typec driver fix - MAINTAINERS file update. All of these have been in linux-next with no reported problems" * tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Don't attempt to resume the ports before they exist usb: gadget: udc: do not clear gadget driver.bus usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait usb: dwc3: qcom: enable vbus override when in OTG dr-mode MAINTAINERS: Add myself as UVC Gadget Maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small serial and vt fixes. These include: - 8250 driver fixes relating to dma issues - stm32 serial driver fix for threaded irqs - vc_screen bugfix for reported problems. All have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF serial: 8250_dma: Fix DMA Rx rearm race serial: 8250_dma: Fix DMA Rx completion race serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a number of small char/misc/whatever driver fixes. They include: - IIO driver fixes for some reported problems - nvmem driver fixes - fpga driver fixes - debugfs memory leak fix in the hv_balloon and irqdomain code (irqdomain change was acked by the maintainer) All have been in linux-next with no reported problems" * tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup() HV: hv_balloon: fix memory leak with using debugfs_lookup() nvmem: qcom-spmi-sdam: fix module autoloading nvmem: core: fix return value nvmem: core: fix cell removal on error nvmem: core: fix device node refcounting nvmem: core: fix registration vs use race nvmem: core: fix cleanup after dev_set_name() nvmem: core: remove nvmem_config wp_gpio nvmem: core: initialise nvmem->id early nvmem: sunxi_sid: Always use 32-bit MMIO reads nvmem: brcm_nvram: Add check for kzalloc iio: imu: fxos8700: fix MAGN sensor scale and unit iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN iio: imu: fxos8700: fix failed initialization ODR mode assignment iio: imu: fxos8700: fix incorrect ODR mode readback iio: light: cm32181: Fix PM support on system with 2 I2C resources iio: hid: fix the retval in gyro_3d_capture_sample iio: hid: fix the retval in accel_3d_capture_sample iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m ... -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: - fix fbcon to prevent fonts bigger than 32x32 pixels to avoid overflows reported by syzbot - switch omapfb to use kstrtobool() - switch some fbdev drivers to use the backlight helpers * tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbcon: Check font dimension limits fbdev: omapfb: Use kstrtobool() instead of strtobool() fbdev: fbmon: fix function name in kernel-doc fbdev: atmel_lcdfb: Rework backlight status updates fbdev: riva: Use backlight helper fbdev: omapfb: panel-dsi-cm: Use backlight helper fbdev: nvidia: Use backlight helper fbdev: mx3fb: Use backlight helper fbdev: radeon: Use backlight helper fbdev: atyfb: Use backlight helper fbdev: aty128fb: Use backlight helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: - Prevent the compiler from reordering accesses to debug regs which could cause a #VC exception in SEV-ES guests at the wrong place in the NMI handling path * tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Borislav Petkov: - Lock the proper critical section when dealing with perf event context * tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_pmu_context serialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "It's a bit of a big batch for rc6, but just because I didn't send any fixes the last week or two while I was on vacation, next week should be quieter: - Fix a few objtool warnings since we recently enabled objtool. - Fix a deadlock with the hash MMU vs perf record. - Fix perf profiling of asynchronous interrupt handlers. - Revert the IMC PMU nest_init_lock to being a mutex. - Two commits fixing problems with the kexec_file FDT size estimation. - Two commits fixing problems with strict RWX vs kernels running at non-zero. - Reconnect tlb_flush() to hash__tlb_flush() Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy, and Sourabh Jain" * tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush() powerpc/kexec_file: Count hot-pluggable memory in FDT estimate powerpc/64s/radix: Fix RWX mapping with relocated kernel powerpc/64s/radix: Fix crash with unaligned relocated kernel powerpc/kexec_file: Fix division by zero in extra size estimation powerpc/imc-pmu: Revert nest_init_lock to being a mutex powerpc/64: Fix perf profiling asynchronous interrupt handlers powerpc/64s: Fix local irq disable when PMIs are disabled powerpc/kvm: Fix unannotated intra-function call warning powerpc/85xx: Fix unannotated intra-function call warning
-
- 04 Feb, 2023 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixes from Alexandre Belloni: "Here are a few fixes for 6.2. The EFI one is the most important as it allows some RTCs to actually work. The other two are warnings that are worth fixing. - efi: make WAKEUP services optional - sunplus: fix format string warning" * tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: sunplus: fix format string for printing resource dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property rtc: efi: Enable SET/GET WAKEUP services as optional
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix two bugs (for building and for signing) when MODULE_SIG_KEY contains a PKCS#11 URI * tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI certs: Fix build error when PKCS#11 URI contains semicolon
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM64: - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Test read-only PT memory regions KVM: selftests: aarch64: Fix check of dirty log PT write KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs KVM: selftests: aarch64: Relax userfaultfd read vs. write checks KVM: arm64: Allow no running vcpu on saving vgic3 pending table KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status KVM: arm64: Add helper vgic_write_guest_lock() -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: - Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit kernel - pdc_iodc_print() dropped chars for newline in strings - Drop constants in favour of PRIV_USER - use safer strscpy() function in pdc_stable driver * tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c parisc: Fix return code of pdc_iodc_print() parisc: pdc_stable: use strscpy() to instead of strncpy()
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC mailing list update from Stafford Horne: "The old mailing list for OpenRISC died due to some infrastructure issues and the people in charge decided not to keep it running. We have migrated this and the users over to kernel.org infrastructure. Sending this out now to avoid kernel developers getting lots of bounced mails for using the old list" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: Update OpenRISC mailing list
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.2, take #3 - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle
-
Samuel Thibault authored
blit_x and blit_y are u32, so fbcon currently cannot support fonts larger than 32x32. The 32x32 case also needs shifting an unsigned int, to properly set bit 31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font", as reported on: http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com Kernel Branch: 6.2.0-rc5-next-20230124 Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharingReported-by:
Sanan Hasanov <sanan.hasanov@Knights.ucf.edu> Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Fixes: 2d2699d9 ("fbcon: font setting should check limitation of driver") Cc: stable@vger.kernel.org Tested-by:
Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Helge Deller <deller@gmx.de>
-
- 03 Feb, 2023 9 commits
-
-
Kan Liang authored
The Retire Latency field is added in the var3_w of the PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports the number of elapsed core clocks between the retirement of the instruction indicated by the Instruction Pointer field of the PEBS record and the retirement of the prior instruction. That's quite useful to display the information with perf script. Add a new field retire_lat for the Retire Latency information. Reviewed-by:
-
Kan Liang authored
The Retire Latency field is added in the var3_w of the PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports pipeline stall of this instruction compared to the previous instruction in cycles. That's quite useful to display the information with perf mem report. The p_stage_cyc for Power is also from the var3_w. Union the p_stage_cyc and retire_lat to share the code. Implement X86 specific codes to display the X86 specific header. Add a new sort key retire_lat for the Retire Latency. Reviewed-by:
-
Namhyung Kim authored
It'd be useful to filter other than the current aggregation mode. For example, users may want to see callstacks for specific locks only. Or they may want tasks from a certain callstack. The tracepoints already collected the information but it needs to check the condition again when processing the event. And it needs to change BPF to allow the key combinations. The lock contentions on 'rcu_state' spinlock can be monitored: $ sudo perf lock con -abv -L rcu_state sleep 1 ... contended total wait max wait avg wait type caller 4 151.39 us 62.57 us 37.85 us spinlock rcu_core+0xcb 0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46 0xffffffff8172d76b rcu_core+0xcb 0xffffffff822000eb __softirqentry_text_start+0xeb 0xffffffff816a0ba9 __irq_exit_rcu+0xc9 0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2 0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16 0xffffffff81d49f78 cpuidle_enter_state+0xd8 0xffffffff81d4a259 cpuidle_enter+0x29 1 30.21 us 30.21 us 30.21 us spinlock rcu_core+0xcb 0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46 0xffffffff8172d76b rcu_core+0xcb 0xffffffff822000eb __softirqentry_text_start+0xeb 0xffffffff816a0ba9 __irq_exit_rcu+0xc9 0xffffffff81fc00c4 sysvec_apic_timer_interrupt+0x54 0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16 1 28.84 us 28.84 us 28.84 us spinlock rcu_accelerate_cbs_unlocked+0x40 0xffffffff81fd1c60 _raw_spin_lock+0x30 0xffffffff81728cf0 rcu_accelerate_cbs_unlocked+0x40 0xffffffff8172da82 rcu_core+0x3e2 0xffffffff822000eb __softirqentry_text_start+0xeb 0xffffffff816a0ba9 __irq_exit_rcu+0xc9 0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2 0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16 0xffffffff81d49f78 cpuidle_enter_state+0xd8 ... To see tasks calling 'rcu_core' function: $ sudo perf lock con -abt -S rcu_core sleep 1 contended total wait max wait avg wait pid comm 19 23.46 us 2.21 us 1.23 us 0 swapper 2 18.37 us 17.01 us 9.19 us 2061859 ThreadPoolForeg 3 5.76 us 1.97 us 1.92 us 3909 pipewire-pulse 1 2.26 us 2.26 us 2.26 us 1809271 MediaSu~isor #2 1 1.97 us 1.97 us 1.97 us 1514882 Chrome_ChildIOT 1 987 ns 987 ns 987 ns 3740 pipewire-pulse Signed-off-by: -
Namhyung Kim authored
This is a preparation work to support complex keys of BPF maps. Now it has single value key according to the aggregation mode like stack_id or pid. But we want to use a combination of those keys. Then lock_contention_read() should still aggregate the result based on the key that was requested by user. The other key info will be used for filtering. So instead of creating a lock_stat entry always, Check if it's already there using lock_stat_find() first. Signed-off-by:
-
Namhyung Kim authored
The lock_contention_get_name() returns a name for the lock stat entry based on the current aggregation mode. As it's called sequentially in a single thread, it can return the address of a static buffer for symbol and offset of the caller. Signed-off-by:
-
Rob Herring authored
Arm SPEv1.2 adds a new optional address packet type: previous branch target. The recorded address is the target virtual address of the most recently taken branch in program order. Add support for decoding the address packet in raw dumps. Reviewed-by:
Rob Herring <robh@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230203162401.132931-1-robh@kernel.orgSigned-off-by:
-
Ian Rogers authored
Add a target that generates a log file for running metric_test.py and make this a dependency on generating pmu-events.c. The log output is displayed if the test fails like (the test was modified to make it fail): ``` TEST /tmp/perf/pmu-events/metric_test.log F...... ====================================================================== FAIL: test_Brackets (__main__.TestMetricExpressions) ---------------------------------------------------------------------- Traceback (most recent call last): File "tools/perf/pmu-events/metric_test.py", line 33, in test_Brackets self.assertEqual((a * b + c).ToPerfJson(), 'a * b + d') AssertionError: 'a * b + c' != 'a * b + d' - a * b + c ? ^ + a * b + d ? ^ ---------------------------------------------------------------------- Ran 7 tests in 0.004s FAILED (failures=1) make[3]: *** [pmu-events/Build:32: /tmp/perf/pmu-events/metric_test.log] Error 1 ``` However, normal execution will just show the TEST line. This is roughly modeled on fortify testing in the kernel lib directory. Modify metric_test.py so that it is executable. This is necessary when PYTHON isn't specified in the build, the normal case. Use variables to make the paths to files clearer and more consistent. Committer notes: Add pmu-events/metric_test.log to tools/perf/.gitignore and to the 'clean' target on tools/perf/Makefile.perf. Reviewed-by:Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "A bit bigger than I'd like at this point, but mostly a bunch of little fixes. In detail: - NVMe pull request via Christoph: - Fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel) - Clear queue pointers on tag_set initialization failure (Maurizio Lombardi) - Use workqueue dedicated to authentication (Shin'ichiro Kawasaki) - Fix for an overflow in ublk (Liu) - Fix for leaking a queue reference in block cgroups (Ming) - Fix for a use-after-free in BFQ (Yu)" * tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux: blk-cgroup: don't update io stat for root cgroup nvme-auth: use workqueue dedicated to authentication nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association block: Fix the blk_mq_destroy_queue() documentation block: ublk: extending queue_size to fix overflow block, bfq: fix uaf for bfqq in bic_set_bfqq() -
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A safeguard to prevent the kernel client from further damaging the filesystem after running into a case of an invalid snap trace. The root cause of this metadata corruption is still being investigated but it appears to be stemming from the MDS. As such, this is the best we can do for now" * tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client: ceph: blocklist the kclient when receiving corrupted snap trace ceph: move mount state enum to super.h
-
