- 03 Mar, 2018 11 commits
-
-
Daniele Palmas authored
[ Upstream commit c647c0d6 ] This patch adds support for Telit ME910 PID 0x1101. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Igor Russkikh authored
[ Upstream commit 1e366161 ] Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Igor Russkikh authored
[ Upstream commit e4d02ca0 ] Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by:
-
Keith Busch authored
[ Upstream commit 249159c5 ] Some devices with IDs matching the "stripe" quirk don't actually have this quirk, and don't have an MDTS value. When MDTS is not set, the driver sets the max sectors to UINT_MAX, which is not a power of 2, hitting a BUG_ON from blk_queue_chunk_sectors. This patch skips setting chunk sectors for such devices. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
James Smart authored
[ Upstream commit 4596e752 ] There are two put references in the failure case of initial create_association. The first put actually frees the controller, thus the second put references freed memory. Remove the unnecessary 2nd put. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit e796cc6a ] The platform_get_irq_byname() function returns negative if an error occurs. zero or positive number on success. platform_get_irq_byname() error checking for zero is not correct. Fixes: 6d6ce40f ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Andreas Platschek authored
[ Upstream commit 2610acf4 ] Previously enabled clks are only disabled if clk_prepare_enable() fails. However, there are other error paths were the previously enabled clocks are not disabled. To fix the problem, fsl_disable_clocks() now takes the number of clocks that shall be disabled + unprepared. For existing calls were all clocks were already successfully prepared + enabled, DMAMUX_NR is passed to disable + unprepare all clocks. In error paths were only some clocks were successfully prepared + enabled the loop counter is passed, in order to disable + unprepare all successfully prepared + enabled clocks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Andreas Platschek <andreas.platschek@opentech.at> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Prasad B Munirathnam authored
[ Upstream commit 5771cfff ] "FIB_CONTEXT_FLAG_TIMEDOUT" flag is set in aac_eh_abort to indicate command timeout. Using the same flag in reset handler causes the command to time out and the I/Os were dropped. Define a new flag "FIB_CONTEXT_FLAG_EH_RESET" to make sure I/O is properly handled in eh_reset handler. [mkp: tweaked commit message] Signed-off-by:
Prasad B Munirathnam <prasad.munirathnam@microsemi.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 1f704fd0 ] A semaphore is acquired before this check, so we must release it before leaving. Link: http://lkml.kernel.org/r/20171211211009.4971-1-christophe.jaillet@wanadoo.fr Fixes: b7f0554a ("mm: fail get_vaddr_frames() for filesystem-dax mappings") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 3756f640 ] gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Kees Cook <keescook@chromium.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Aleksa Sarai <asarai@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Anna-Maria Gleixner authored
commit 48d0c9be upstream. The POSIX specification defines that relative CLOCK_REALTIME timers are not affected by clock modifications. Those timers have to use CLOCK_MONOTONIC to ensure POSIX compliance. The introduction of the additional HRTIMER_MODE_PINNED mode broke this requirement for pinned timers. There is no user space visible impact because user space timers are not using pinned mode, but for consistency reasons this needs to be fixed. Check whether the mode has the HRTIMER_MODE_REL bit set instead of comparing with HRTIMER_MODE_ABS. Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Fixes: 597d0275 ("timers: Framework for identifying pinned timers") Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.deSigned-off-by:
-
- 28 Feb, 2018 29 commits
-
-
Greg Kroah-Hartman authored
-
Arnd Bergmann authored
commit 71e7673d upstream. Building an allmodconfig kernel fails horribly because of endian mismatch. It turns out that the -mlittle-endian switch was not honored at all as we were using the wrong Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS. Finally, the linker flags did not get set right. This addresses all three of those issues, which now lets me build both big-endian and little-endian kernels for testing. Fixes: 428dbf15 ("arch: change default endian for microblaze") Fixes: 206d3642 ("arch/microblaze: add choice for endianness and update Makefile") Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Geert Uytterhoeven authored
commit c95f1211 upstream. The m32r Kconfig provides both CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN configuration options. As they are user-selectable and independent, this allows invalid configurations: - All m32r defconfigs build a big endian kernel, but CPU_BIG_ENDIAN is not set, causing compiler warnings like: include/linux/byteorder/big_endian.h:7:2: warning: #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN [-Wcpp] #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN ^ - Since commit 5bdfca64 ("m32r: define CPU_BIG_ENDIAN"), building an allmodconfig or allyesconfig enables both CONFIG_CPU_BIG_ENDIAN and CONFIG_CPU_LITTLE_ENDIAN. While this did get rid of the warning above, both options are obviously mutually exclusive. Fix this by making only CPU_LITTLE_ENDIAN configurable by the user, as before, and by making sure exactly one of CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN is always enabled. Link: http://lkml.kernel.org/r/1509361505-18150-1-git-send-email-geert@linux-m68k.org Fixes: 5bdfca64 ("m32r: define CPU_BIG_ENDIAN") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Chris Wilson authored
commit 117172c8 upstream. When a request is preempted, it is unsubmitted from the HW queue and removed from the active list of breadcrumbs. In the process, this however triggers the signaler and it may see the clear rbtree with the old, and still valid, seqno, or it may match the cleared seqno with the now zero rq->global_seqno. This confuses the signaler into action and signaling the fence. Fixes: d6a2289d ("drm/i915: Remove the preempted request from the execution queue") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.12+ Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180206094633.30181-1-chris@chris-wilson.co.uk (cherry picked from commit fd10e2ce) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180213090154.17373-1-chris@chris-wilson.co.ukSigned-off-by:
-
Kai-Heng Feng authored
commit 6e59de20 upstream. The affected system (0x0813) is pretty similar to another one (0x0812), it also needs to use ATPX power control. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 458d876e upstream. We only support vga_switcheroo and runtime pm on PX/HG systems so forcing runpm to 1 doesn't do anything useful anyway. Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so that the cleanup path is correct as well. This mirrors what radeon does as well. v2: rework the patch originally sent by Lukas (Alex) Acked-by:
Lukas Wunner <lukas@wunner.de> Reported-by:
-
Alex Deucher authored
commit 052c2990 upstream. Add quirks for handling PX/HG systems. In this case, add a quirk for a weston dGPU that only seems to properly power down using ATPX power control rather than HG (_PR3). v2: append a new weston XT Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 57ad33a3 upstream. We only support SR-IOV on tonga/fiji. Don't check this register on other VI parts. Fixes: 048765ad (amdgpu: fix asic initialization for virtualized environments (v2)) Reviewed-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
-
Alex Deucher authored
commit f2e5262f upstream. Fixes stability issues. v2: clamp sclk to 600 Mhz Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370Acked-by:
-
Huang Rui authored
commit 400b6afb upstream. MMHUB power gating still has issue, and doesn't work on raven at current. So disable it for the moment. Signed-off-by:
Huang Rui <ray.huang@amd.com> Acked-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
-
Chris Wilson authored
commit b8ff1802 upstream. During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489da ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.ukSigned-off-by:
-
Daniel Vetter authored
commit 745fd50f upstream. In the past the ast driver relied upon the fbdev emulation helpers to call ->load_lut at boot-up. But since commit b8e2b019 Author: Peter Rosin <peda@axentia.se> Date: Tue Jul 4 12:36:57 2017 +0200 drm/fb-helper: factor out pseudo-palette that's cleaned up and drivers are expected to boot into a consistent lut state. This patch fixes that. Fixes: b8e2b019 ("drm/fb-helper: factor out pseudo-palette") Cc: Peter Rosin <peda@axenita.se> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.14+ References: https://bugzilla.kernel.org/show_bug.cgi?id=198123Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180131110450.22153-1-daniel.vetter@ffwll.chSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 17aa31f1 upstream. This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3 ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Jack Pham authored
commit 675272d0 upstream. In commit 2bfa0719 ("usb: gadget: function: f_fs: pass companion descriptor along") there is a pointer arithmetic bug where the comp_desc is obtained as follows: comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + USB_DT_ENDPOINT_SIZE); Since ds is a pointer to usb_endpoint_descriptor, adding 7 to it ends up going out of bounds (7 * sizeof(struct usb_endpoint_descriptor), which is actually 7*9 bytes) past the SS descriptor. As a result the maxburst value will be read incorrectly, and the UDC driver will also get a garbage comp_desc (assuming it uses it). Since Felipe wrote, "Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though", let's finally do it. This allows the other usb_ep fields to be properly populated, such as maxpacket and mult. It also eliminates the awkward speed-based descriptor lookup since config_ep_by_speed() does that already using the ones found in struct usb_function. Fixes: 2bfa0719 ("usb: gadget: function: f_fs: pass companion descriptor along") Cc: stable@vger.kernel.org Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Jack Pham authored
commit 6cf439e0 upstream. During _ffs_func_bind(), the received descriptors are evaluated to prepare for binding with the gadget in order to allocate endpoints and optionally set up OS descriptors. However, the high- and super-speed descriptors are only parsed based on whether the gadget_is_dualspeed() and gadget_is_superspeed() calls are true, respectively. This is a problem in case a userspace program always provides all of the {full,high,super,OS} descriptors when configuring a function. Then, for example if a gadget device is not capable of SuperSpeed, the call to ffs_do_descs() for the SS descriptors is skipped, resulting in an incorrect offset calculation for the vla_ptr when moving on to the OS descriptors that follow. This causes ffs_do_os_descs() to fail as it is now looking at the SS descriptors' offset within the raw_descs buffer instead. _ffs_func_bind() should evaluate the descriptors unconditionally, so remove the checks for gadget speed. Fixes: f0175ab5 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Co-Developed-by:
Mayank Rana <mrana@codeaurora.org> Signed-off-by:
-
Bin Liu authored
commit 44eb5e12 upstream. This reverts commit dbac5d07. commit dbac5d07 ("usb: musb: host: don't start next rx urb if current one failed") along with commit b5801212 ("usb: musb: host: clear rxcsr error bit if set") try to solve the issue described in [1], but the latter alone is sufficient, and the former causes the issue as in [2], so now revert it. [1] https://marc.info/?l=linux-usb&m=146173995117456&w=2 [2] https://marc.info/?l=linux-usb&m=151689238420622&w=2 Cc: stable@vger.kernel.org # v4.7+ Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Karsten Koop authored
commit 52ad2bd8 upstream. This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by:
Karsten Koop <kkoop@ld-didactic.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit f035d139 upstream. DWC3 tracks TRB counter for each ep0 direction separately. In control read transfer completion handler, the driver needs to reset the TRB enqueue counter for ep0 IN direction. Currently the driver only resets the TRB counter for control OUT endpoint. Check for the data direction and properly reset the TRB counter from correct control endpoint. Cc: stable@vger.kernel.org Fixes: c2da2ff0 ("usb: dwc3: ep0: don't use ep0in for transfers") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Thinh Nguyen authored
commit 61800263 upstream. There are 2 control endpoint structures for DWC3. However, the driver only updates the OUT direction control endpoint structure during ConnectDone event. DWC3 driver needs to update the endpoint max packet size for control IN endpoint as well. If the max packet size is not properly set, then the driver will incorrectly calculate the data transfer size and fail to send ZLP for HS/FS 3-stage control read transfer. The fix is simply to update the max packet size for the ep0 IN direction during ConnectDone event. Cc: stable@vger.kernel.org Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by:
-
Peter Chen authored
commit 02a10f06 upstream. commit a8c06e40 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller, but forgot to do it for hcd test mode. Replace the correct one in this commit. Fixes: a8c06e40 ("usb: separate out sysdev pointer from usb_bus") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 06998a75 upstream. Similar to commit e10aec65 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
-
Jack Stocker authored
commit 7a1646d9 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by:
Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Will Deacon authored
commit be68a8aa upstream. Our field definitions for CTR_EL0 suffer from a number of problems: - The IDC and DIC fields are missing, which causes us to enable CTR trapping on CPUs with either of these returning non-zero values. - The ERG is FTR_LOWER_SAFE, whereas it should be treated like CWG as FTR_HIGHER_SAFE so that applications can use it to avoid false sharing. - [nit] A RES1 field is described as "RAO" This patch updates the CTR_EL0 field definitions to fix these issues. Cc: <stable@vger.kernel.org> Cc: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Michael Weiser authored
commit 5ee39a71 upstream. aarch64 unhandled signal kernel messages are very verbose, suggesting them to be more of a debugging aid: sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000046, in sigsegv[400000+71000] CPU: 1 PID: 33 Comm: sigsegv Tainted: G W 4.15.0-rc3+ #3 Hardware name: linux,dummy-virt (DT) pstate: 60000000 (nZCv daif -PAN -UAO) pc : 0x4003f4 lr : 0x4006bc sp : 0000fffffe94a060 x29: 0000fffffe94a070 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 00000000004001b0 x23: 0000000000486ac8 x22: 00000000004001c8 x21: 0000000000000000 x20: 0000000000400be8 x19: 0000000000400b30 x18: 0000000000484728 x17: 000000000865ffc8 x16: 000000000000270f x15: 00000000000000b0 x14: 0000000000000002 x13: 0000000000000001 x12: 0000000000000000 x11: 0000000000000000 x10: 0008000020008008 x9 : 000000000000000f x8 : ffffffffffffffff x7 : 0004000000000000 x6 : ffffffffffffffff x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000004003e4 x2 : 0000fffffe94a1e8 x1 : 000000000000000a x0 : 0000000000000000 Disable them by default, so they can be enabled using /proc/sys/debug/exception-trace. Cc: <stable@vger.kernel.org> Signed-off-by:
Michael Weiser <michael.weiser@gmx.de> Signed-off-by:
-
Michael Weiser authored
commit 1962682d upstream. Stop printing a (ratelimited) kernel message for each instance of an unimplemented syscall being called. Userland making an unimplemented syscall is not necessarily misbehaviour and to be expected with a current userland running on an older kernel. Also, the current message looks scary to users but does not actually indicate a real problem nor help them narrow down the cause. Just rely on sys_ni_syscall() to return -ENOSYS. Cc: <stable@vger.kernel.org> Acked-by:
-
AMAN DEEP authored
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() commit 46408ea5 upstream. There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by:
Aman Deep <aman.deep@samsung.com> Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Shigeru Yoshida authored
commit b2685bda upstream. Running io_watchdog_func() while ohci_urb_enqueue() is running can cause a race condition where ohci->prev_frame_no is corrupted and the watchdog can mis-detect following error: ohci-platform 664a0800.usb: frame counter not updating; disabled ohci-platform 664a0800.usb: HC died; cleaning up Specifically, following scenario causes a race condition: 1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number read by ohci_frame_no(ohci) 4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section 6. Later, ohci_urb_enqueue() is called 7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 8. The timer scheduled on step 4 expires and io_watchdog_func() runs 9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags) and waits on it because ohci_urb_enqueue() is already in the critical section on step 7 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number read by ohci_frame_no(ohci) because the frame number proceeded between step 3 and 6 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section, then wake up io_watchdog_func() which is waiting on step 9 14. io_watchdog_func() enters the critical section 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no variable to the frame number 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no On step 16, because this calling of io_watchdog_func() is scheduled on step 4, the frame number set in ohci->prev_frame_no is expected to the number set on step 3. However, ohci->prev_frame_no is overwritten on step 11. Because step 16 is executed soon after step 11, the frame number might not proceed, so ohci->prev_frame_no must equals to frame_no. To address above scenario, this patch introduces a special sentinel value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when the watchdog is not pending or running. When ohci_urb_enqueue() schedules the watchdog (step 4 and 12 above), it compares ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is not overwritten while io_watchdog_func() is running. Signed-off-by:
Shigeru Yoshida <Shigeru.Yoshida@windriver.com> Signed-off-by:
Haiqing Bai <Haiqing.Bai@windriver.com> Acked-by:
-
Casey Leedom authored
commit 7dcf688d upstream. We've run into a problem where our device is attached to a Virtual Machine and the use of the new pci_set_vpd_size() API doesn't help. The VM kernel has been informed that the accesses are okay, but all of the actual VPD Capability Accesses are trapped down into the KVM Hypervisor where it goes ahead and imposes the silent denials. The right idea is to follow the kernel.org commit 1c7de2b4 ("PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored to establish a PCI Quirk for our T3-based adapters. This commit extends that PCI Quirk to cover Chelsio T4 devices and later. The advantage of this approach is that the VPD Size gets set early in the Base OS/Hypervisor Boot and doesn't require that the cxgb4 driver even be available in the Base OS/Hypervisor. Thus PF4 can be exported to a Virtual Machine and everything should work. Fixes: 67e65879 ("cxgb4: Set VPD size so we can read both VPD structures") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Matt Redfearn authored
commit 285cb4f6 upstream. Commit 7778c4b2 ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") removed the read of the hardware mask register when handling shared interrupts, instead using the driver's shadow pcpu_masks entry as the effective mask. Unfortunately this did not take account of the write to pcpu_masks during gic_shared_irq_domain_map, which effectively unmasks the interrupt early. If an interrupt is asserted, gic_handle_shared_int decodes and processes the interrupt even though it has not yet been unmasked via gic_unmask_irq, which also sets the appropriate bit in pcpu_masks. On the MIPS Boston board, when a console command line of "console=ttyS0,115200n8r" is passed, the modem status IRQ is enabled in the UART, which is immediately raised to the GIC. The interrupt has been mapped, but no handler has yet been registered, nor is it expected to be unmasked. However, the write to pcpu_masks in gic_shared_irq_domain_map has effectively unmasked it, resulting in endless reports of: [ 5.058454] irq 13, desc: ffffffff80a7ad80, depth: 1, count: 0, unhandled: 0 [ 5.062057] ->handle_irq(): ffffffff801b1838, [ 5.062175] handle_bad_irq+0x0/0x2c0 Where IRQ 13 is the UART interrupt. To fix this, just remove the write to pcpu_masks in gic_shared_irq_domain_map. The existing write in gic_unmask_irq is the correct place for what is now the effective unmasking. Cc: stable@vger.kernel.org Fixes: 7778c4b2 ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Reviewed-by:
Paul Burton <paul.burton@mips.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
