- 23 Feb, 2017 8 commits
-
-
Christoph Hellwig authored
This gives us a clear state even if a command didn't return sense data. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
We accidentally return an uninitialized variable on success. Fixes: b6ff1b14 ("[SCSI] scsi_dh: Update EMC handler") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Colin Ian King authored
On an allocation failure of gd, the current exit path is via out_free_devt which leaves sdpk still allocated and hence it gets leaked. Fix this by correcting the order of resource free'ing with a change in the error exit path labels. Detected by CoverityScan, CID#1399519 ("Resource Leak") Fixes: 0dba1314 ("scsi, block: fix duplicate bdi name registration crashes") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/scsi/sd.c:3087:6: warning: symbol 'sd_devt_release' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Dupuis, Chad authored
The QLogic FastLinQ Driver for FCoE (qedf) is the FCoE specific module for 41000 Series Converged Network Adapters by QLogic. This patch consists of following changes: - MAINTAINERS Makefile and Kconfig changes for qedf - PCI driver registration - libfc/fcoe host level initialization - SCSI host template initialization and callbacks - Debugfs and log level infrastructure - Link handling - Firmware interface structures - QED core module initialization - Light L2 interface callbacks - I/O request initialization - Firmware I/O completion handling - Firmware ELS request/response handling - FIP request/response handled by the driver itself Signed-off-by:
Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by:
Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by:
Arun Easi <arun.easi@cavium.com> Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Michael Hernandez authored
For target mode, we need to increase minimum vectors value by one to account for ATIO queue. Following stack trace will be seen Call Trace: qla24xx_config_rings+0x15a/0x230 [qla2xxx] qla2x00_init_rings+0x1a1/0x3a0 [qla2xxx] qla2x00_restart_isp+0x5c/0x120 [qla2xxx] qla2x00_abort_isp+0x138/0x430 [qla2xxx] ? __schedule+0x260/0x580 qla2x00_do_dpc+0x3bc/0x920 [qla2xxx] ? qla2x00_relogin+0x290/0x290 [qla2xxx] ? schedule+0x3a/0xa0 ? qla2x00_relogin+0x290/0x290 [qla2xxx] kthread+0x103/0x140 ? __kthread_init_worker+0x40/0x40 ret_from_fork+0x29/0x40 RIP: qlt_24xx_config_rings+0x6c/0x90 [mkp: fixed Fixes: hash] Cc: <stable@vger.kernel.org> Fixes: 17e5fc58 ("scsi: qla2xxx: fix MSI-X vector affinity") Signed-off-by:
Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Michael Hernandez authored
Target mode initialization was not calculating response queue values correctly resulting into one less MSI-X vector. [mkp: fixed Fixes: hash] Cc: <stable@vger.kernel.org> Fixes: 093df737 ("scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.") Signed-off-by:
-
Michael Hernandez authored
This patch cleaned up queue configuration code, such that once initialized, we should not touch msix_count value. This will prevent incorrect numbers of MSI-X vectors requested while performing target mode configuration. [mkp: fixed Fixes: hash] Cc: <stable@vger.kernel.org> Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.") Signed-off-by:
-
- 22 Feb, 2017 32 commits
-
-
James Smart authored
Add missing Kconfig NVME dependencies. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 11.2.0.7 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
Update copyrights to 2017 for all files touched in this patch set Signed-off-by:
-
James Smart authored
NVME Target: Add debugfs support Adds debugfs snippets to cover the new NVME target functionality Signed-off-by:
-
James Smart authored
NVME Target: Tie in to NVME Fabrics nvmet_fc LLDD target api Adds the routines to: - register and deregister the FC port as a nvmet-fc targetport - binding of nvme queues to adapter WQs - receipt and passing of NVME LS's to transport, sending transport response - receipt of NVME FCP CMD IUs, processing FCP target io data transmission commands; transmission of FCP io response - Abort operations for tgt io exchanges [mkp: fixed space at end of file warning] Signed-off-by:
-
James Smart authored
NVME Target: Merge into FC discovery Adds NVME PRLI handling and Nameserver registrations for NVME Signed-off-by:
-
James Smart authored
NVME Target: Receive buffer updates Allocates buffer pools and configures adapter interfaces to handle receive buffer (asynchronous FCP CMD ius, first burst data) from the adapter. Splits by protocol, etc. Signed-off-by:
-
James Smart authored
NVME Target: Base modifications This set of patches adds the base modifications for NVME target support The base modifications consist of: - Additional module parameters or configuration tuning - Enablement of configuration mode for NVME target. Ties into the queueing model put into place by the initiator basemods patches. - Target-specific buffer pools, dma pools, sgl pools [mkp: fixed space at end of file] Signed-off-by:
-
James Smart authored
NVME Initiator: Add debugfs support Adds debugfs snippets to cover the new NVME initiator functionality Signed-off-by:
-
James Smart authored
NVME Initiator: Tie in to NVME Fabrics nvme_fc LLDD initiator api Adds the routines to: - register and deregister the FC port as a nvme-fc initiator localport - register and deregister remote FC ports as a nvme-fc remoteport - binding of nvme queues to adapter WQs - send/perform NVME LS's - send/perform NVME FCP initiator io operations Signed-off-by:
-
James Smart authored
NVME Initiator: Merge into FC discovery Adds NVME PRLI support and Nameserver registrations and Queries for NVME Signed-off-by:
-
James Smart authored
NVME Initiator: Base modifications This patch adds base modifications for NVME initiator support. The base modifications consist of: - Formal split of SLI3 rings from SLI-4 WQs (sometimes referred to as rings as well) as implementation now widely varies between the two. - Addition of configuration modes: SCSI initiator only; NVME initiator only; NVME target only; and SCSI and NVME initiator. The configuration mode drives overall adapter configuration, offloads enabled, and resource splits. NVME support is only available on SLI-4 devices and newer fw. - Implements the following based on configuration mode: - Exchange resources are split by protocol; Obviously, if only 1 mode, then no split occurs. Default is 50/50. module attribute allows tuning. - Pools and config parameters are separated per-protocol - Each protocol has it's own set of queues, but share interrupt vectors. SCSI: SLI3 devices have few queues and the original style of queue allocation remains. SLI4 devices piggy back on an "io-channel" concept that eventually needs to merge with scsi-mq/blk-mq support (it is underway). For now, the paradigm continues as it existed prior. io channel allocates N msix and N WQs (N=4 default) and either round robins or uses cpu # modulo N for scheduling. A bunch of module parameters allow the configuration to be tuned. NVME (initiator): Allocates an msix per cpu (or whatever pci_alloc_irq_vectors gets) Allocates a WQ per cpu, and maps the WQs to msix on a WQ # modulo msix vector count basis. Module parameters exist to cap/control the config if desired. - Each protocol has its own buffer and dma pools. I apologize for the size of the patch. Signed-off-by: -
James Smart authored
Create common wq, cq, eq, rq dump functions Signed-off-by:
-
James Smart authored
Create common wq, cq, eq, rq print functions Signed-off-by:
-
James Smart authored
This contains code cleanups that were in the prior patch set. This allows better review of real changes later. minor code cleanups: fix indentation, punctuation, line length addition/reduction of whitespace remove unneeded parens, braces lpfc_debugfs_nodelist_data: print as u64 rather than byte by byte covert printk(KERN_ERR to pr_err small print string deltas use num_present_cpus() rather than count them comment updates rctl/type names moved to module variable, not on stack Signed-off-by:
-
Christoph Hellwig authored
This avoids having to store the msix_entries array and simpliefies the shutdown and cleanup path a lot. Signed-off-by:
-
James Smart authored
Correct WQ creation for pagesize The driver was calculating the adapter command pagesize indicator from the system pagesize. However, the buffers the driver allocates are only one size (SLI4_PAGE_SIZE), so no calculation was necessary. Signed-off-by:
-
Matthew R. Ochs authored
Add support for a future IBM Coherent Accelerator (CXL) flash AFU with an ID of 0x0624. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
-
Hannes Reinecke authored
The device handler needs to check if a given queue belongs to a scsi device; only then does it make sense to attach a device handler. [mkp: dropped flags] Cc: <stable@vger.kernel.org> Signed-off-by:
-
Subhash Jadavani authored
Dan Carpenter <dan.carpenter@oracle.com> reported this: The patch 9c46b867: "scsi: ufs-qcom: dump additional testbus registers" from Feb 3, 2017, leads to the following static checker warning: drivers/scsi/ufs/ufs-qcom.c:1531 ufs_qcom_testbus_cfg_is_ok() warn: impossible condition '(host->testbus.select_minor > 255) => (0-255 > 255)' drivers/scsi/ufs/ufs-qcom.c 1517 static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) 1518 { 1519 if (host->testbus.select_major >= TSTBUS_MAX) { 1520 dev_err(host->hba->dev, 1521 "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", 1522 __func__, host->testbus.select_major); 1523 return false; 1524 } 1525 1526 /* 1527 * Not performing check for each individual select_major 1528 * mappings of select_minor, since there is no harm in 1529 * configuring a non-existent select_minor 1530 */ 1531 if (host->testbus.select_minor > 0xFF) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ It might make sense to keep this check. I don't know. But it's confusing that 0xFF is a magic number. Better to make it a define. 1532 dev_err(host->hba->dev, 1533 "%s: 0x%05X is not a legal testbus option\n", 1534 __func__, host->testbus.select_minor); 1535 return false; 1536 } 1537 1538 return true; 1539 } --- As data type of "select_minor" is u8, above check is redundant. This change removes it. Reported-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
When we have turned off RTC support, the smartpqi driver fails to build: ERROR: "rtc_time64_to_tm" [drivers/scsi/smartpqi/smartpqi.ko] undefined! This is easily avoided by using the generic 'struct tm' based helper rather than the RTC specific one. While fixing this, I noticed that even though the driver uses time64_t for storing seconds, it gets them from the old 32-bit struct timeval. To address this, we can simplify the code by calling ktime_get_real_seconds() directly. Fixes: 6c223761 ("smartpqi: initial commit of Microsemi smartpqi driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
Updated driver version to 50792 Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
David Carroll <David.Carroll@microsemi.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
The driver does not unlock the reply queue spin lock after handling SMART adapter events. Instead it might attempt to unlock an already unlocked spin lock. Fixed by making sure the driver locks the spin lock before freeing it. Thank you dan for finding this issue out. Fixes: 6223a39f (scsi: aacraid: Added support for hotplug) Reported-by:
-
Raghava Aditya Renukunta authored
Currently the adapter firmware does not save outstanding I/O's log information when an IOP reset is triggered. This is problematic when trying to root cause and debug issues. Fixed by adding sync command to trigger I/O log file save in the adapter firmware before issuing an IOP reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
The driver currently checks the SELF_TEST_FAILED first and then KERNEL_PANIC next. Under error conditions(boot code failure) both SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time. The driver has the capability to reset the controller on an KERNEL_PANIC, but not on SELF_TEST_FAILED. Fixed by first checking KERNEL_PANIC and then the others. Cc: stable@vger.kernel.org Fixes: e8b12f0f ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family) Signed-off-by:
-
Raghava Aditya Renukunta authored
When the SMART family of controller panic (KERNEL_PANIC) , they do not honor IOP resets. So better to skip it and directly perform a IWBR reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
Currently driver checks the health status of the adapter once every 24 hours. When that happens the driver becomes dependent on the kernel to figure out if the adapter is misbehaving. This might take some time (when the adapter is idle). The driver currently has support to restart/recover the controller when it fails, and decreasing the time interval will help. Fixed by decreasing check interval from 24 hours to 1 minute Signed-off-by:
-
Raghava Aditya Renukunta authored
During the IOP reset stress testing, it was found that the drives can be marked offline when the adapter controller crashes and IO's are running in parallel. When the controller does come back from the reset, the drive that is marked offline is not exposed. Fixed by removing and adding drives that are marked offline. In addition invoke a scsi host bus rescan to capture any additional configuration changes. Signed-off-by:
-
Raghava Aditya Renukunta authored
aac_command_thread checks on the health of controller periodically, using aac_check_health. If the status is an error state KERNEL_PANIC or anything else. The driver will attempt to restart the adapter, but the response is not checked in aac_command_thread. This allows the periodic sync to go thru and lead the driver to a hung state. Fixed by terminating the periodic loop(intended per original design), if the controller is not restored to a healthy state. Cc: stable@vger.kernel.org Fixes: 3d77d840 (scsi: aacraid: Added support for periodic wellness sync) Signed-off-by:
-
Raghava Aditya Renukunta authored
After controller shutdown, all sync fibs time out due to not knowing about the switch to INT-x mode Fixed by replacing aac_src_access_devreg() to aac_set_intx_mode() call. Cc: stable@vger.kernel.org Fixes: 495c0217 (aacraid: MSI-x support) Signed-off-by:
-
Raghava Aditya Renukunta authored
Added support to retrieve driver version from a new sysfs variable called driver_version. It makes it easier for the user to figure out the driver version that is currently running. Signed-off-by:
-
Raghava Aditya Renukunta authored
aac_fib_map_free frees misaligned fib dma memory, additionally it does not free up the whole memory. Fixed by changing the code to free up the correct and full memory allocation. Cc: stable@vger.kernel.org Fixes: e8b12f0f ([SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family) Signed-off-by:
-
