- 13 Mar, 2018 40 commits
-
-
Tony Lindgren authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit 4071898b ] This gets qmicli working with the MDM6600 modem. Cc: Bjørn Mork <bjorn@mork.no> Reviewed-by:
Sebastian Reichel <sre@kernel.org> Tested-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit 13e2d518 ] We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbd ("bna: Add debugfs interface.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit aea92fb2 ] skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Herbert Xu authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit 8a0f5ccf ] On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote: > > Yes, please. > Disregarding some reports is not a good way long term. Please try this patch. ---8<--- Subject: netlink: Annotate nlk cb_mutex by protocol Currently all occurences of nlk->cb_mutex are annotated by lockdep as a single class. This causes a false lcokdep cycle involving genl and crypto_user. This patch fixes it by dividing cb_mutex into individual classes based on the netlink protocol. As genl and crypto_user do not use the same netlink protocol this breaks the false dependency loop. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vaidyanathan Srinivasan authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit ad0a45fd ] If a given cpu is not in cpu_present and cpu hotplug is disabled, arch can skip setting up the cpu_dev. Arch cpuidle driver should pass correct cpu mask for registration, but failing to do so by the driver causes error to propagate and crash like this: [ 30.076045] Unable to handle kernel paging request for data at address 0x00000048 [ 30.076100] Faulting instruction address: 0xc0000000007b2f30 cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670] pc: c0000000007b2f30: kobject_get+0x20/0x70 lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0 sp: c000003feb18b8f0 msr: 9000000000009033 dar: 48 dsisr: 40000000 current = 0xc000003fd2ed8300 paca = 0xc00000000fbab500 softe: 0 irq_happened: 0x01 pid = 1, comm = swapper/0 Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017 enter ? for help [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0 [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0 [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130 [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0 [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120 [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4 [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0 [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360 [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160 [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74 Validating cpu_dev fixes the crash and reports correct error message like: [ 30.163506] Failed to register cpuidle device for cpu136 [ 30.173329] Registration of powernv driver failed. Signed-off-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> [ rjw: Comment massage ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jon Medhurst authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit 974310d0 ] kprobes test cases need to have a stack that is aligned to an 8-byte boundary because they call other functions (and the ARM ABI mandates that alignment) and because test cases include 64-bit accesses to the stack. Unfortunately, GCC doesn't ensure this alignment for inline assembler and for the code in question seems to always misalign it by pushing just the LR register onto the stack. We therefore need to explicitly perform stack alignment at the start of each test case. Without this fix, some test cases will generate alignment faults on systems where alignment is enforced. Even if the kernel is configured to handle these faults in software, triggering them is ugly. It also exposes limitations in the fault handling code which doesn't cope with writes to the stack. E.g. when handling this instruction strd r6, [sp, #-64]! the fault handling code will write to a stack location below the SP value at the point the fault occurred, which coincides with where the exception handler has pushed the saved register context. This results in corruption of those registers. Signed-off-by:
Jon Medhurst <tixy@linaro.org> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit 06553175 ] This is arm port of commit 737480a0 ("kprobes/x86: Fix the return address of multiple kretprobes"). Fix the return address of subsequent kretprobes when multiple kretprobes are set on the same function. For example: # cd /sys/kernel/debug/tracing # echo "r:event1 sys_symlink" > kprobe_events # echo "r:event2 sys_symlink" >> kprobe_events # echo 1 > events/kprobes/enable # ln -s /tmp/foo /tmp/bar (without this patch) # cat trace | grep -v ^# ln-82 [000] dn.2 68.446525: event1: (kretprobe_trampoline+0x0/0x18 <- SyS_symlink) ln-82 [000] dn.2 68.447831: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink) (with this patch) # cat trace | grep -v ^# ln-81 [000] dn.1 39.463469: event1: (ret_fast_syscall+0x0/0x1c <- SyS_symlink) ln-81 [000] dn.1 39.464701: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink) Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: KUMANO Syuhei <kumano.prog@gmail.com> Signed-off-by:
-
Jaroslav Kysela authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit cc3a47a2 ] This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 840 G3. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jaroslav Kysela authored
BugLink: http://bugs.launchpad.net/bugs/1745054 [ Upstream commit 04d5466a ] This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 820 G2. Signed-off-by:
-
Aaron Lu authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit 82ba4fac upstream. Since commit: 52aec330 ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR") the TLB remote shootdown is done through call function vector. That commit didn't take care of irq_tlb_count, which a later commit: fd0f5869 ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts") ... tried to fix. The fix assumes every increase of irq_tlb_count has a corresponding increase of irq_call_count. So the irq_call_count is always bigger than irq_tlb_count and we could substract irq_tlb_count from irq_call_count. Unfortunately this is not true for the smp_call_function_single() case. The IPI is only sent if the target CPU's call_single_queue is empty when adding a csd into it in generic_exec_single. That means if two threads are both adding flush tlb csds to the same CPU's call_single_queue, only one IPI is sent. In other words, the irq_call_count is incremented by 1 but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be bigger than irq_call_count and the substract will produce a very large irq_call_count value due to overflow. Considering that: 1) it's not worth to send more IPIs for the sake of accurate counting of irq_call_count in generic_exec_single(); 2) it's not easy to tell if the call function interrupt is for TLB shootdown in __smp_call_function_single_interrupt(). Not to exclude TLB shootdown from call function count seems to be the simplest fix and this patch just does that. This bug was found by LKP's cyclic performance regression tracking recently with the vm-scalability test suite. I have bisected to commit: 3dec0ba0 ("mm/rmap: share the i_mmap_rwsem") This commit didn't do anything wrong but revealed the irq_call_count problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file concurrent with multiple threads. When remap_one is try_to_unmap_one(), then multiple threads could queue flush TLB to the same CPU but only one IPI will be sent. Since the commit was added in Linux v3.19, the counting problem only shows up from v3.19 onwards. Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit 252d2a41 upstream. idle_task_exit() can be called with IRQs on x86 on and therefore should use switch_mm(), not switch_mm_irqs_off(). This doesn't seem to cause any problems right now, but it will confuse my upcoming TLB flush changes. Nonetheless, I think it should be backported because it's trivial. There won't be any meaningful performance impact because idle_task_exit() is only used when offlining a CPU. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.orgSigned-off-by:
-
Steven Rostedt authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit ef0491ea upstream. The introduction of switch_mm_irqs_off() brought back an old bug regarding the use of preempt_enable_no_resched: As part of: 62b94a08 ("sched/preempt: Take away preempt_enable_no_resched() from modules") the definition of preempt_enable_no_resched() is only available in built-in code, not in loadable modules, so we can't generally use it from header files. However, the ARM version of finish_arch_post_lock_switch() calls preempt_enable_no_resched() and is defined as a static inline function in asm/mmu_context.h. This in turn means we cannot include asm/mmu_context.h from modules. With today's tip tree, asm/mmu_context.h gets included from linux/mmu_context.h, which is normally the exact pattern one would expect, but unfortunately, linux/mmu_context.h can be included from the vhost driver that is a loadable module, now causing this compile time error with modular configs: In file included from ../include/linux/mmu_context.h:4:0, from ../drivers/vhost/vhost.c:18: ../arch/arm/include/asm/mmu_context.h: In function 'finish_arch_post_lock_switch': ../arch/arm/include/asm/mmu_context.h:88:3: error: implicit declaration of function 'preempt_enable_no_resched' [-Werror=implicit-function-declaration] preempt_enable_no_resched(); Andy already tried to fix the bug by including linux/preempt.h from asm/mmu_context.h, but that didn't help. Arnd suggested reordering the header files, which wasn't popular, so let's use this workaround instead: The finish_arch_post_lock_switch() definition is now also hidden inside of #ifdef MODULE, so we don't see anything referencing preempt_enable_no_resched() from a header file. I've built a few hundred randconfig kernels with this, and did not see any new problems. Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-arm-kernel@lists.infradead.org Fixes: f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") Link: http://lkml.kernel.org/r/1463146234-161304-1-git-send-email-arnd@arndb.deSigned-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit 078194f8 upstream. Potential races between switch_mm() and TLB-flush or LDT-flush IPIs could be very messy. AFAICT the code is currently okay, whether by accident or by careful design, but enabling PCID will make it considerably more complicated and will no longer be obviously safe. Fix it with a big hammer: run switch_mm() with IRQs off. To avoid a performance hit in the scheduler, we take advantage of our knowledge that the scheduler already has IRQs disabled when it calls switch_mm(). Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f19baf759693c9dcae64bbff76189db77cb13398.1461688545.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit f98db601 upstream. By default, this is the same thing as switch_mm(). x86 will override it as an optimization. Signed-off-by:
-
Ingo Molnar authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit 8efd755a upstream. Some architectures (such as Alpha) rely on include/linux/sched.h definitions in their mmu_context.h files. So include sched.h before mmu_context.h. Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Nadav Amit authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit 858eaaa7 upstream. The recently introduced batched invalidations mechanism uses its own mechanism for shootdown. However, it does wrong accounting of interrupts (e.g., inc_irq_stat is called for local invalidations), trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and may break some platforms as it bypasses the invalidation mechanisms of Xen and SGI UV. This patch reuses the existing TLB flushing mechnaisms instead. We use NULL as mm to indicate a global invalidation is required. Fixes 72b252ae ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by:
Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit d12a72b8 upstream. This adds a chicken bit to turn off INVPCID in case something goes wrong. It's an early_param() because we do TLB flushes before we parse __setup() parameters. Signed-off-by:
-
Borislav Petkov authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit e2c7698c upstream. So we want to specify the dependency on both @pcid and @addr so that the compiler doesn't reorder accesses to them *before* the TLB flush. But for that to work, we need to express this properly in the inline asm and deref the whole desc array, not the pointer to it. See clwb() for an example. This fixes the build error on 32-bit: arch/x86/include/asm/tlbflush.h: In function ‘__invpcid’: arch/x86/include/asm/tlbflush.h:26:18: error: memory input 0 is not directly addressable which gcc4.7 caught but 5.x didn't. Which is strange. :-\ Signed-off-by:
-
Vaibhav Jain authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit 12841f87 upstream. During an eeh a kernel-oops is reported if no vPHB is allocated to the AFU. This happens as during AFU init, an error in creation of vPHB is a non-fatal error. Hence afu->phb should always be checked for NULL before iterating over it for the virtual AFU pci devices. This patch fixes the kenel-oops by adding a NULL pointer check for afu->phb before it is dereferenced. Fixes: 9e8df8a2 ("cxl: EEH support") Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Steve Capper authored
BugLink: http://bugs.launchpad.net/bugs/1745054 commit f24e5834 upstream. The high_memory global variable is used by cma_declare_contiguous(.) before it is defined. We don't notice this as we compute __pa(high_memory - 1), and it looks like we're processing a VA from the direct linear map. This problem becomes apparent when we flip the kernel virtual address space and the linear map is moved to the bottom of the kernel VA space. This patch moves the initialisation of high_memory before it used. Fixes: f7426b98 ("mm: cma: adjust address limit to avoid hitting low/high memory boundary") Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1745052Signed-off-by:
-
Miaoqing Pan authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit ee0a4718 ] When the user sets count to zero the string buffer would remain completely uninitialized which causes the kernel to parse its own stack data, potentially leading to an info leak. In addition to that, the string might be not terminated properly when the user data does not contain a 0-terminator. Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by:
Christoph Böhmwalder <christoph@boehmwalder.at> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Alex Vesker authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit b4b678b0 ] When ndo_open and ndo_stop are called RTNL lock should be held. In this specific case ipoib_ib_dev_open calls the offloaded ndo_open which re-sets the number of TX queue assuming RTNL lock is held. Since RTNL lock is not held, RTNL assert will fail. Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c0b64f58 ] According to the C standard the behavior of computations with integer operands is as follows: * A computation involving unsigned operands can never overflow, because a result that cannot be represented by the resulting unsigned integer type is reduced modulo the number that is one greater than the largest value that can be represented by the resulting type. * The behavior for signed integer underflow and overflow is undefined. Hence only use unsigned integers when checking for integer overflow. This patch is what I came up with after having analyzed the following smatch warnings: drivers/infiniband/core/cma.c:3448: cma_resolve_ib_udp() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len' drivers/infiniband/core/cma.c:3505: cma_connect_ib() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len' Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Alexander Duyck authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit dd6b9c2c ] This patch intoduces a slight adjustment for macvlan to address the fact that in source mode I was seeing two copies of any packet addressed to the macvlan interface being delivered where there should have been only one. The issue appears to be that one copy was delivered based on the source MAC address and then the second copy was being delivered based on the destination MAC address. To fix it I am just treating a unicast address match as though it is not a match since source based macvlan isn't supposed to be matching based on the destination MAC anyway. Fixes: 79cf79ab ("macvlan: add source mode") Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit abdc0eb0 ] When session starts beyond offset 2^31 the arithmetics in udf_check_vsd() would overflow. Make sure the computation is done in large enough type. Reported-by:
Cezary Sliwa <sliwa@ifpan.edu.pl> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 3e351275 ] We could allocate less memory than intended because we do: bfad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. I fixed the network version of this in March with commit 13e2d518 ("bna: integer overflow bug in debugfs"). Fixes: ab2a9ba1 ("[SCSI] bfa: add debugfs support") Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
weiping zhang authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 658e9a6d ] /sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0 unexpectedly by writing an invalid string such as the following: echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Signed-off-by:
-
weiping zhang authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 623401ee ] /sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0 unexpectly by writing an invalid string. Signed-off-by:
-
Jia-Ju Bai authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 42c8eb3f ] The driver may sleep under a spinlock, and the function call path is: vt6655_suspend (acquire the spinlock) pci_set_power_state __pci_start_power_transition (drivers/pci/pci.c) msleep --> may sleep To fix it, pci_set_power_state is called without having a spinlock. This bug is found by my static analysis tool and my code review. Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Kurt Garloff authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 909cf3e1 ] All EMC SYMMETRIX support REPORT_LUNS, even if configured to report SCSI-2 for whatever reason. Signed-off-by:
Kurt Garloff <garloff@suse.de> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
NeilBrown authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 235b6003 ] When reshaping a fully degraded raid5/raid6 to a larger nubmer of devices, the new device(s) are not in-sync and so that can make the newly grown stripe appear to be "failed". To avoid this, we set the R5_Expanded flag to say "Even though this device is not fully in-sync, this block is safe so don't treat the device as failed for this stripe". This flag is set for data devices, not not for parity devices. Consequently, if you have a RAID6 with two devices that are partly recovered and a spare, and start a reshape to include the spare, then when the reshape gets past the point where the recovery was up to, it will think the stripes are failed and will get into an infinite loop, failing to make progress. So when contructing parity on an EXPAND_READY stripe, set R5_Expanded. Reported-by:
Curt <lightspd@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Linus Walleij authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 1c363531 ] The build robot is complaining on Blackfin: drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup': >> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing pointer to incomplete type 'struct gpio_port_t' writew(readw(®s->port_fer) & ~BIT(offset), ^~ drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq': >> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing pointer to incomplete type 'struct bfin_pint_regs' if (readl(®s->invert_set) & pintbit) ^~ It seems the driver need to include <asm/gpio.h> and <asm/irq.h> to compile. The Blackfin architecture was re-defining the Kconfig PINCTRL symbol which is not OK, so replaced this with PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2 just like most arches do. Further, the old GPIO driver symbol GPIO_ADI was possible to select at the same time as selecting PINCTRL. This was not working because the arch-local <asm/gpio.h> header contains an explicit #ifndef PINCTRL clause making compilation break if you combine them. The same is true for DEBUG_MMRS. Make sure the ADI2 pinctrl driver is not selected at the same time as the old GPIO implementation. (This should be converted to use gpiolib or pincontrol and move to drivers/...) Also make sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at the same time as the new PINCTRL implementation, and only make PINCTRL_ADI2 selectable for the Blackfin families that actually have it. This way it is still possible to add e.g. I2C-based pin control expanders on the Blackfin. Cc: Steven Miao <realmz6@gmail.com> Cc: Huanhuan Feng <huanhuan.feng@analog.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Bin Liu authored
BugLink: http://bugs.launchpad.net/bugs/1745052 commit bd3486de upstream. When babble condition happens, the musb controller might automatically turns off VBUS. On DA8xx platform, the controller generates drvvbus interrupt for turning off VBUS along with the babble interrupt. In this case, we should handle the babble interrupt first and recover from the babble condition. This change ignores the drvvbus interrupt if babble interrupt is also generated at the same time, so the babble recovery routine works properly. Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
nixiaoming authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c79dde62 ] After rmmod 8250.ko tty_kref_put starts kwork (release_one_tty) to release proc interface oops when accessing driver->driver_name in proc_tty_unregister_driver Use jprobe, found driver->driver_name point to 8250.ko static static struct uart_driver serial8250_reg .driver_name= serial, Use name in proc_dir_entry instead of driver->driver_name to fix oops test on linux 4.1.12: BUG: unable to handle kernel paging request at ffffffffa01979de IP: [<ffffffff81310f40>] strchr+0x0/0x30 PGD 1a0d067 PUD 1a0e063 PMD 851c1f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ... ... [last unloaded: 8250] CPU: 7 PID: 116 Comm: kworker/7:1 Tainted: G O 4.1.12 #1 Hardware name: Insyde RiverForest/Type2 - Board Product Name1, BIOS NE5KV904 12/21/2015 Workqueue: events release_one_tty task: ffff88085b684960 ti: ffff880852884000 task.ti: ffff880852884000 RIP: 0010:[<ffffffff81310f40>] [<ffffffff81310f40>] strchr+0x0/0x30 RSP: 0018:ffff880852887c90 EFLAGS: 00010282 RAX: ffffffff81a5eca0 RBX: ffffffffa01979de RCX: 0000000000000004 RDX: ffff880852887d10 RSI: 000000000000002f RDI: ffffffffa01979de RBP: ffff880852887cd8 R08: 0000000000000000 R09: ffff88085f5d94d0 R10: 0000000000000195 R11: 0000000000000000 R12: ffffffffa01979de R13: ffff880852887d00 R14: ffffffffa01979de R15: ffff88085f02e840 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01979de CR3: 0000000001a0c000 CR4: 00000000001406e0 Stack: ffffffff812349b1 ffff880852887cb8 ffff880852887d10 ffff88085f5cd6c2 ffff880852800a80 ffffffffa01979de ffff880852800a84 0000000000000010 ffff88085bb28bd8 ffff880852887d38 ffffffff812354f0 ffff880852887d08 Call Trace: [<ffffffff812349b1>] ? __xlate_proc_name+0x71/0xd0 [<ffffffff812354f0>] remove_proc_entry+0x40/0x180 [<ffffffff815f6811>] ? _raw_spin_lock_irqsave+0x41/0x60 [<ffffffff813be520>] ? destruct_tty_driver+0x60/0xe0 [<ffffffff81237c68>] proc_tty_unregister_driver+0x28/0x40 [<ffffffff813be548>] destruct_tty_driver+0x88/0xe0 [<ffffffff813be5bd>] tty_driver_kref_put+0x1d/0x20 [<ffffffff813becca>] release_one_tty+0x5a/0xd0 [<ffffffff81074159>] process_one_work+0x139/0x420 [<ffffffff810745a1>] worker_thread+0x121/0x450 [<ffffffff81074480>] ? process_scheduled_works+0x40/0x40 [<ffffffff8107a16c>] kthread+0xec/0x110 [<ffffffff81080000>] ? tg_rt_schedulable+0x210/0x220 [<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80 [<ffffffff815f7292>] ret_from_fork+0x42/0x70 [<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80 Signed-off-by:
nixiaoming <nixiaoming@huawei.com> Signed-off-by:
-
Michael Ellerman authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 05c14c03 ] In the hv-24x7 code there is a function memord() which tries to implement a sort function return -1, 0, 1. However one of the conditions is incorrect, such that it can never be true, because we will have already returned. I don't believe there is a bug in practice though, because the comparisons are an optimisation prior to calling memcmp(). Fix it by swapping the second comparision, so it can be true. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Martin Wilck authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit dfb2e6f4 ] This patch cleans up a lot of warnings when unloading the driver. A current example of the stack trace starts with: [ 142.570715] sysfs group 'power' not found for kobject 'port-5:0' There can be hundreds of these messages during a driver unload. I am resubmitting this patch on behalf of Martin Wilck with his permission. His original patch can be found here: https://www.spinics.net/lists/linux-scsi/msg102085.html This patch did not help until Hannes's commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod") was applied to the kernel. --------------------------- Original patch description: --------------------------- Unloading the hpsa driver causes warnings [ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240() [ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0' with two different stacks: 1) [ 1063.793774] [<ffffffff81448af4>] device_del+0x54/0x240 [ 1063.793780] [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60 [ 1063.793784] [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0 [ 1063.793802] [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas] [ 1063.793819] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa] 2) [ 1063.797103] [<ffffffff81448af4>] device_del+0x54/0x240 [ 1063.797118] [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas] [ 1063.797134] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa] This is caused by the fact that host device hostX is deleted before the SAS transport devices hostX/port-a:b. This patch fixes this by reverting the order of device deletions. Tested-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Martin Wilck <mwilck@suse.de> Signed-off-by:
-
Martin Wilck authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 55ca38b4 ] I am resubmitting this patch on behalf of Martin Wilck with his permission. The original patch can be found here: https://www.spinics.net/lists/linux-scsi/msg102083.html This patch did not help until Hannes's commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod") was applied to the kernel. -------------------------------------- Original patch description from Martin: -------------------------------------- When the hpsa module is unloaded using rmmod, dangling symlinks remain under /sys/class/sas_phy. Fix this by calling sas_phy_delete() rather than sas_phy_free (which, according to comments, should not be called for PHYs that have been set up successfully, anyway). Tested-by:
-
Alex Williamson authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 16b6c8bb ] When removing a device, for example a VF being removed due to SR-IOV teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual hot-unplug, we first remove the procfs and sysfs attributes for the device before attempting to release the device from any driver bound to it. Unbinding the driver from the device can take time. The device might need to write out data or it might be actively in use. If it's in use by userspace through a vfio driver, the unbind might block until the user releases the device. This leads to a potentially non-trivial amount of time where the device exists, but we've torn down the interfaces that userspace uses to examine devices, for instance lspci might generate this sort of error: pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config lspci: Unable to read the standard configuration space header of device 0000:01:0a.3 We don't seem to have any dependence on this teardown ordering in the kernel, so let's unbind the driver first, which is also more symmetric with the instantiation of the device in pci_bus_add_device(). Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Christoph Hellwig authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 5e422f5e ] There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the passed in new extent state but always converted to normal, leading to wrong behavior when converting from normal to unwritten. Only found by code inspection, it seems like this code path to move partial extent from written to unwritten while merging it with the next extent is rarely exercised. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
