- 27 Sep, 2017 21 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Introduce support for "pass" gact action offloading Very simple patchset adds ability for user to insert filters with "pass" gact action and offload it. That allows scenarios like this: $ tc filter add dev enp3s0np19 ingress protocol ip pref 10 flower skip_sw dst_ip 192.168.101.0/24 action drop $ tc filter add dev enp3s0np19 ingress protocol ip pref 9 flower skip_sw dst_ip 192.168.101.1 action pass ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
If action is "gact_ok", offload it to HW. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Introduce a helper called is_tcf_gact_pass which could be used to tell if the action is gact pass or not. Signed-off-by:
-
Jiri Pirko authored
Propagate error instead of doing WARN_ON right away. Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: use generic slave phydev DSA currently stores a phy_device pointer in each slave private structure. This requires to implement our own ethtool ksettings accessors and such. This patchset removes the private phy_device in favor of the one provided in the net_device structure, and thus allows us to use the generic phy_ethtool_* functions. ==================== Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vivien Didelot authored
Use phy_ethtool_nway_reset now that dsa_slave_nway_reset does exactly the same. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Vivien Didelot authored
Use phy_ethtool_set_link_ksettings now that dsa_slave_set_link_ksettings does exactly the same. Signed-off-by:
-
Vivien Didelot authored
Use phy_ethtool_get_link_ksettings now that dsa_slave_get_link_ksettings does exactly the same. Signed-off-by:
-
Vivien Didelot authored
There is no need to store a phy_device in dsa_slave_priv since net_device already provides one. Simply s/p->phy/dev->phydev/. Signed-off-by:
-
Vivien Didelot authored
Instead of returning -EOPNOTSUPP when a slave device has no PHY, directly return -ENODEV as ethtool and phylib do. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Add router adjacency dpipe table Arkadi says: This patchset adds router adjacency dpipe table support. This will provide the ability to observe the hardware offloaded IPv4/6 nexthops. ==================== Signed-off-by: -
Arkadi Sharshevsky authored
Add support for controlling nexthop counters via dpipe. Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
Add support for adjacency table dump. Signed-off-by:
-
Arkadi Sharshevsky authored
Add support for setting counters on nexthops based on dpipe's adjacency table counter status. This patch also adds the ability for getting the counter value, which will be used by the dpipe adjacency table dump implementation in the next patches. Signed-off-by:
-
Arkadi Sharshevsky authored
In order to add the ability for setting counters on nexthops the RATR register should be extended. Signed-off-by:
-
Arkadi Sharshevsky authored
Add initial support for router adjacency table. The table does lookup based on the nexthop-group index and the local nexthop offset. After locating the nexthop entry it sets the destination MAC address and the egress RIF. Signed-off-by:
-
Arkadi Sharshevsky authored
This is done as a preparation before introducing the ability to dump the adjacency table via dpipe, and to count the table size. The current table implementation avoids tunnel entries, thus a helper for checking if the nexthop group contains tunnel entries is also provided. The mlxsw's nexthop representative struct stays private to the router module. Signed-off-by:
-
Arkadi Sharshevsky authored
Use list_is_last helper to check for last neighbor. Signed-off-by:
-
Arkadi Sharshevsky authored
Keep nexthops in a linked list for easy access. Signed-off-by:
-
Arkadi Sharshevsky authored
This patch adds field for mlxsw's meta header which will be used to describe the match/action behavior of the adjacency table. The fields are: 1. Adj_index - The global index of the nexthop group in the adjacency table. 2. Adj_hash_index - Local index offset which is based on packets hash mod the nexthop group size. Signed-off-by:
-
Arkadi Sharshevsky authored
Fix indentation in mlxsw_meta header's description. Signed-off-by:
-
- 26 Sep, 2017 19 commits
-
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF metadata for direct access This work enables generic transfer of metadata from XDP into skb, meaning the packet has a flexible and programmable room for meta data, which can later be used by BPF to set various skb members when passing up the stack. For details, please see second patch. Support has been implemented and tested with two drivers, and should be straight forward to add to other drivers as well which properly support head adjustment already. ==================== Signed-off-by: -
Daniel Borkmann authored
Implement support for transferring XDP meta data into skb for ixgbe driver; before calling into the program, xdp.data_meta points to xdp.data, where on program return with pass verdict, we call into skb_metadata_set(). We implement this for the default ixgbe_build_skb() variant. For the ixgbe_construct_skb() that is used when legacy-rx buffer mananagement mode is turned on via ethtool, I found that XDP gets 0 headroom, so neither xdp_adjust_head() nor xdp_adjust_meta() can be used with this. Just add a comment with explanation for this operating mode. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Implement support for transferring XDP meta data into skb for nfp driver; before calling into the program, xdp.data_meta points to xdp.data, where on program return with pass verdict, we call into skb_metadata_set(). Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Daniel Borkmann authored
Add various test_verifier selftests, and a simple xdp/tc functional test that is being attached to veths. Also let new versions of clang use the recently added -mcpu=probe support [1] for the BPF target, so that it can probe the underlying kernel for BPF insn set extensions. We could also just set this options always, where older versions just ignore it and give a note to the user that the -mcpu value is not supported, but given emitting the note cannot be turned off from clang side lets not confuse users running selftests with it, thus fallback to the default generic one when we see that clang doesn't support it. Also allow CPU option to be overridden in the Makefile from command line. [1] https://github.com/llvm-mirror/llvm/commit/d7276a40d87b89aed89978dec6457a5b8b3a0db5Signed-off-by:
-
Daniel Borkmann authored
Looks like a couple of updates missed to get carried into tools/include/uapi/, so copy the bpf.h header as usual to pull in latest updates. Signed-off-by:
-
Daniel Borkmann authored
This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by:
-
Daniel Borkmann authored
Just do the rename into bpf_compute_data_pointers() as we'll add one more pointer here to recompute. Signed-off-by:
-
Himanshu Jha authored
Use setup_timer and mod_timer API instead of structure assignments. This is done using Coccinelle and semantic patch used for this as follows: @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
David S. Miller authored
Michal Kalderon says: ==================== qed: iWARP fixes and enhancements This patch series includes several fixes and enhancements related to iWARP. Patch #1 is actually the last of the initial iWARP submission. It has been delayed until now as I wanted to make sure that qedr supports iWARP prior to enabling iWARP device detection. iWARP changes in RDMA tree have been accepted and targeted at kernel 4.15, therefore, all iWARP fixes for this cycle are submitted to net-next. Changes from v1->v2 - Added "Fixes:" tag to commit message of patch #3 ==================== Signed-off by: Michal.Kalderon@cavium.com Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Michal Kalderon authored
A SYN packet which arrives with errors from FW should be dropped. This required adding an additional field to the ll2 rx completion data. Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Michal Kalderon authored
The maximum number of CQs supported is bound to the number of connections supported, which differs between RoCE and iWARP. This fixes a crash that occurred in iWARP when running 1000 sessions using perftest. Fixes: 67b40dcc ("qed: Implement iWARP initialization, teardown and qp operations") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Michal Kalderon authored
iWARP requires OOO support which is already provided by the ll2 interface (until now was used only for iSCSI offload). The changes mostly include opening a ll2 dedicated connection for OOO and notifiying the FW about the handle id. Signed-off-by:
-
Michal Kalderon authored
This patch is the last of the initial iWARP patch series. It adds the possiblity to actually detect iWARP from the device and enable it in the critical locations which basically make iWARP available. It wasn't submitted until now as iWARP hadn't been accepted into the rdma tree. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
