- 11 Oct, 2013 17 commits
-
-
Marcel Holtmann authored
The scan interval and window parameters are used for LE passive background scanning and connection establishment. This allows userspace to change the values. These two values should be kept in sync with whatever is used for the scan parameters service on remote devices. And it puts the controlling daemon (for example bluetoothd) in charge of setting the values. Main use case would be to switch between two sets of values. One for foreground applications and one for background applications. At this moment, the values are only used for manual connection establishment, but soon that should be extended to background scanning and automatic connection establishment. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The scan interval and window for LE passive scanning and connection establishment should be configurable on a per controller basis. So introduce a setting that later on will allow modifying it. This setting does not affect LE active scanning during device discovery phase. As long as that phase uses interleaved discovery, it will continuously scan. Signed-off-by:
-
Marcel Holtmann authored
The ath3k_table[] and ath3k_blist_tbl[] USB device tables can be declared as const. Signed-off-by:
-
Marcel Holtmann authored
The bpa10x_table[] device table can be declared as const Signed-off-by:
-
Marcel Holtmann authored
The bfusb_table[] device table can be declared as const Signed-off-by:
-
Marcel Holtmann authored
The btusb_table[] and blacklist_table[] USB device tables can be declared as const. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of vhci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of hci_uart_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of dtl1_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of btuart_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of btmrvl_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of bt3c_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of bluecard_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of bfusb_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by:
-
Marcel Holtmann authored
Instead of masking hdev inside the skb->dev parameter, hand it directly to the driver as a parameter to hdev->send. This makes the driver interface more clear and simpler. This patch fixes all drivers to accept and handle the new parameter of hdev->send callback. Special care has been taken for bpa10x and btusb drivers that require having skb->dev set to hdev for the URB transmit complete handlers. Signed-off-by:
-
Marcel Holtmann authored
To avoid casting skb->dev into hdev, just let the drivers provide the hdev directly when calling hci_recv_frame() function. This patch also fixes up all drivers to provide the hdev. Signed-off-by:
-
Marcel Holtmann authored
The function h4_check_data_len() is actually not used. So just remove it. Signed-off-by:
-
- 10 Oct, 2013 23 commits
-
-
Marcel Holtmann authored
The return value of hci_send_frame() is never checked. So just make this function void and print an error when the hdev->send driver callback returns a negative value. Having the error printed is actually an improvement over the current situation where any driver error just gets ignored. Signed-off-by:
-
Marcel Holtmann authored
The hdev parameter of hci_send_frame must be always valid. If the hdev is not valid, it would not even make it to this stage. The callers will have already accessed hdev at that point many times. Signed-off-by:
-
Marcel Holtmann authored
The assignement of skb->dev is done all over the place. So it makes it hard to eventually get rid of it. Move it all in one central place so it gets assigned right before calling hdev->send driver callback. Signed-off-by:
-
Marcel Holtmann authored
The smp.h header file is only used internally by the bluetooth.ko module and is not a public API. So make it local to the core Bluetooth module. Signed-off-by:
-
Marcel Holtmann authored
The a2mp.h header file is only used internally by the bluetooth.ko module and is not a public API. So make it local to the core Bluetooth module. Signed-off-by:
-
Marcel Holtmann authored
The amp.h header file is only used internally by the bluetooth.ko module and is not a public API. So make it local to the core Bluetooth module. Signed-off-by:
-
Marcel Holtmann authored
Since there is no use of hdev->ioctl by any Bluetooth driver since ever, so just lets remove it. Signed-off-by:
-
Marcel Holtmann authored
The btmrvl_ioctl() function is not used and thus remove it. Signed-off-by:
-
Marcel Holtmann authored
The dtl1_hci_ioctl() function is not used and thus remove it. Signed-off-by:
-
Marcel Holtmann authored
The btuart_hci_ioctl() function is not used and thus remove it. Signed-off-by:
-
Marcel Holtmann authored
The bt3c_hci_ioctl() function is not used and thus remove it. Signed-off-by:
-
Marcel Holtmann authored
The bluecard_hci_ioctl() function is not used and thus remove it. Signed-off-by:
-
Marcel Holtmann authored
The bfusb_ioctl() function is not used and thus remove it. Signed-off-by:
-
Marcel Holtmann authored
The legacy ioctls for device specific commands including inquiry are not support by AMP controllers. So just reject them right away instead of trying to send the HCI command and wait for failure from the actual hardware. Signed-off-by:
-
Marcel Holtmann authored
When changing the alternate setting for the ISOC endpoints, use the hci_conn_num() helper function to count currently established SCO and eSCO connections and store the the value. This avoids direct access to the connection hash. In addition use the stored value instead accessing the connection hash over and over again. Signed-off-by:
-
Marcel Holtmann authored
When checking for the current number of LE connections, use hci_conn_num() function instead of a full blown lookup within the connection hash or direct access of the counters. In the case of re-enabling advertising, it is more useful to check for any connection attempt or existing connection. Signed-off-by:
-
Marcel Holtmann authored
The function declaration goes over 80 characters, so break it down. Signed-off-by:
-
Johan Hedberg authored
When the HCI_SETUP flag is set the controller has not yet been announced over mgmt and therefore doesn't exist from that perspective. If we nevertheless get a mgmt command for it we should respond with the appropriate INVALID_INDEX error. Signed-off-by:
-
Johan Hedberg authored
The l2cap_recv_frame function is expected to take ownership and eventually free the skb passed to it. We need to ensure that the conn->rx_skb pointer is no longer reachable when calling l2cap_recv_frame so that no other function, such as l2cap_conn_del, may think that it can free conn->rx_skb. An actual situation when this can happen is when smp_sig_channel (called from l2cap_recv_frame) fails and l2cap_conn_del gets called as a consequence. The l2cap_conn_del function would then try to free conn->rx_skb, but as the same skb was just passed to smp_sig_channel and freed we get a double-free. Signed-off-by:
-
Marcel Holtmann authored
The support for Bluetooth High Speed can only be enabled on controllers where also Secure Simple Pairing has been enabled. Trying to enable high speed when SSP is disabled will result into an error. Disabling SSP will at the same time disable high speed as well. It is required to enforce this dependency on SSP since high speed support is only defined for authenticated, unauthenticated and debug link keys. These link key types require SSP. Signed-off-by:
-
Marcel Holtmann authored
The variable val in the set_ssp() function of the management interface is not needed. Just use cp->val directly since its input values have already been validated. Signed-off-by:
-
Andre Guedes authored
This patch does some code refactoring in hci_connect_le() by moving the exception code into if statements and letting the main flow in first level of function scope. It also adds extra comments to improve the code readability. Signed-off-by:
Andre Guedes <andre.guedes@openbossa.org> Signed-off-by:
-
Andre Guedes authored
This patch introduces a new helper, which uses the HCI request framework, for creating LE connectons. All the handling is now done by this function so we can remove the hci_cs_le_create_conn() event handler. This patch also removes the old hci_le_create_connection() since it is not used anymore. Signed-off-by:
-
