Move 'ecc_get_curve' to 'include/crypto/ecc_curve.h', so everyone
in kernel tree can easily get ecc curve params;
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. crypto and crypto/atmel-ecc:
   Move curve id of ECDH from the key into the algorithm name instead
   in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh'
   to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh';
2. crypto/testmgr and net/bluetooth:
   Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt
   the modification.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Algorithm type is brought in to get hardware HPRE queue
to support different algorithms.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A new generation of accelerator Kunpeng930 has appeared, and the
corresponding driver needs to be updated to support some new
algorithms of Kunpeng930. To be compatible with Kunpeng920, we
add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to
identify the chip's version.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If SEV has been disabled (e.g. through BIOS), the driver probe will still
issue SEV firmware commands. The SEV INIT firmware command will return an
error in this situation, but the error code is a general error code that
doesn't highlight the exact reason.

Add a check for X86_FEATURE_SEV in sev_dev_init() and emit a meaningful
message and skip attempting to initialize the SEV firmware if the feature
is not enabled. Since building the SEV code is dependent on X86_64, adding
the check won't cause any build problems.

Cc: John Allen <john.allen@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-By: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Given that crypto_alloc_tfm() may return ERR pointers, and to avoid
crashes on obscure error paths where such pointers are presented to
crypto_destroy_tfm() (such as [0]), add an ERR_PTR check there
before dereferencing the second argument as a struct crypto_tfm
pointer.

[0] https://lore.kernel.org/linux-crypto/000000000000de949705bc59e0f6@google.com/

Reported-by: syzbot+12cf5fbfdeba210a89dd@syzkaller.appspotmail.com
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the case where the dma_iv mapping fails, the return error path leaks
the memory allocated to object d.  Fix this by adding a new error return
label and jumping to this to ensure d is free'd before the return.

Addresses-Coverity: ("Resource leak")
Fixes: ac2614d7 ("crypto: sun8i-ss - Add support for the PRNG")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove including <linux/version.h> that don't need it.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_hwrng_register to get rid of manual unregistration.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_hwrng_register to get rid of manual unregistration.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In one of the error paths of the for_each_child_of_node() loop,
add missing call to of_node_put().

Fix the following coccicheck warning:
./drivers/crypto/nx/nx-common-powernv.c:927:1-23: WARNING: Function
"for_each_child_of_node" should have of_node_put() before return around
line 936.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Delete sg_data function, because sg_data function definition same as
sg_virt(), so need to delete it and use sg_virt() replace to sg_data().
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This commit fixes the checkpatch warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
drivers/char/hw_random/omap-rng.c:34
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The driver for Slim Security Subsystem (SlimSSS) on Exynos5433 takes two
clocks - aclk (AXI/AHB clock) and pclk (APB/Advanced Peripheral Bus
clock).  The "aclk", as main high speed bus clock, is enabled first.  Then
the "pclk" is enabled.

However the driver assigned reversed names for lookup of these clocks
from devicetree, so effectively the "pclk" was enabled first.

Although it might not matter in reality, the correct order is to enable
first main/high speed bus clock - "aclk".  Also this was the intention
of the actual code.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a memory leak on an error path.

Fixes: d9b45418 ("crypto: sun8i-ss - support hash algorithms")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

totallen is used to get the size of the data to be transformed.
This is also available via nbytes or cryptlen in the qce_sha_reqctx
and qce_cipher_ctx. Similarly offset convey nothing for the supported
encryption and authentication transformations and is always 0.
Remove these two redundant parameters in qce_start.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

src_table is unused and hence remove it from struct qce_cipher_reqctx
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Set the register REG_ENCR_XTS_DU_SIZE to cryptlen for AES XTS
transformation. Anything else causes the engine to return back
wrong results.
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The following are the conditions for requesting AES fallback cipher.
	-  AES-192
	- AES-XTS request with len <= 512 byte (Allow messages of length
	  less than 512 bytes for all other AES encryption algorithms other
	  than AES XTS)
	- AES-XTS request with len > QCE_SECTOR_SIZE and is not a multiple
	  of it
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ECB transformations do not have an IV and hence set the ivsize to 0 for
ecb(aes).
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ECB/CBC encryption/decryption requires the data to be blocksize aligned.
Crypto engine hangs on non-block sized operations for these algorithms.
Return invalid data if data size is not blocksize aligned for these
algorithms.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Crypto engine BAM dma does not support 0 length data. Return unsupported
if zero length messages are passed for transformation.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Return unsupported if any three keys are same for DES3 algorithms
since CE does not support this and the operation causes the engine to
hang.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Crypto engine does not support key1 = key2 for AES XTS algorithm; the
operation hangs the engines.  Return -EINVAL in case key1 and key2 are the
same.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the available data to transfer is exactly a multiple of block size, save
the last block to be transferred in qce_ahash_final (with the last block
bit set) if this is indeed the end of data stream. If not this saved block
will be transferred as part of next update. If this block is not held back
and if this is indeed the end of data stream, the digest obtained will be
wrong since qce_ahash_final will see that rctx->buflen is 0 and return
doing nothing which in turn means that a digest will not be copied to the
destination result buffer.  qce_ahash_final cannot be made to alter this
behavior and allowed to proceed if rctx->buflen is 0 because the crypto
engine BAM does not allow for zero length transfers.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Export and import interfaces save and restore partial transformation
states. The partial states were being stored and restored in struct
sha1_state for sha1/hmac(sha1) transformations and sha256_state for
sha256/hmac(sha256) transformations.This led to a bunch of corner cases
where improper state was being stored and restored. A few of the corner
cases that turned up during testing are:

- wrong byte_count restored if export/import is called twice without h/w
transaction in between
- wrong buflen restored back if the pending buffer
length is exactly the block size.
- wrong state restored if buffer length is 0.

To fix these issues, save and restore the partial transformation state
using the newly introduced qce_sha_saved_state struct. This ensures that
all the pieces required to properly restart the transformation is captured
and restored back
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 88574332 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 472b0444 ("crypto: keembay - Add Keem Bay OCS HCU driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes the byte order markings in serpent.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # arm64 big-endian
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function meson_crypto_probe() is only called with an openfirmware
platform device. Therefore there is no need to check that the passed
in device is NULL.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clk_prepare_enable() and clk_disable_unprepare() will check
NULL clock parameter, so It is not necessary to add additional checks.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Trivial fix to spelling mistake in adf_pf2vf_msg.c and adf_vf2pf_msg.c.
s/messge/message/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Neither crypto_unregister_shashes() nor the module_exit function return
a value, so the explicit 'return' is unnecessary.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use device-managed registration, so we can delete the ba431_trng_remove.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Eliminate the following coccicheck warning:
./arch/powerpc/crypto/sha1-spe-glue.c:110:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()