- 30 May, 2008 40 commits
-
-
Linus Torvalds authored
.. because it is. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: notify on empty virtio: force callback on empty. virtio_blk: fix endianess annotations virtio_config: fix len calculation of config elements virtio_net: another race with virtio_net and enable_cb virtio: An entropy device, as suggested by hpa. virtio_blk: allow read-only disks lguest: fix ugly <NULL> in /proc/interrupts virtio: set device index in common code. virtio: virtio_pci should not set bus_id. virtio: bus_id for devices should contain 'virtio' Fix crash in virtio_blk during modprobe ; rmmod ; modprobe lguest: use ioremap_cache, not ioremap
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix rpadlpar pci hotplug driver sysfs usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rename SW_RADIO to SW_RFKILL_ALL Input: gtco - fix double kfree in error handling path Input: pxa27x_keypad - miscellaneous fixes Input: atkbd - mark keyboard as disabled when suspending/unloading Input: apanel - remove duplicate include Input: wm9713 - support five wire panels Input: wm97xx-core - fix race on PHY init Input: wm97xx-core - fix driver name Input: wm97xx-core - report a phys for WM97xx touchscreens Input: i8042 - make sure Dritek quirk is invoked at resume Input: i8042 - add Dritek quirk for Acer TravelMate 660
-
Ingo Molnar authored
* Wim Van Sebroeck <wim@iguana.be> wrote: > Author: Jordan Crouse <jordan.crouse@amd.com> > Date: Mon Jan 21 10:07:00 2008 -0700 > > [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers -tip testing found the following build failure on latest -git: drivers/watchdog/geodewdt.c: In function 'geodewdt_probe': drivers/watchdog/geodewdt.c:225: error: too many arguments to function 'geode_mfgpt_alloc_timer' make[1]: *** [drivers/watchdog/geodewdt.o] Error 1 make: *** [drivers/watchdog/geodewdt.o] Error 2 with this config: http://redhat.com/~mingo/misc/config-Fri_May_30_15_19_52_CEST_2008.bad find the fix below. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Jordan Crouse <jordan.crouse@amd.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) llc: Fix double accounting of received packets netfilter: nf_conntrack_expect: fix error path unwind in nf_conntrack_expect_init() bluetooth: fix locking bug in the rfcomm socket cleanup handling mac80211: fix alignment issue with compare_ether_addr() mac80211: Fix for NULL pointer dereference in sta_info_get() mac80211: fix a typo in ieee80211_handle_filtered_frame comment rndis_wlan: add missing range check for power_output modparam iwlwifi: fix rate scale TLC column selection bug iwlwifi: fix exit from stay_in_table state rndis_wlan: Make connections to TKIP PSK networks work mac80211 : Fixes the status message for iwconfig rt2x00: Use atomic interface iteration in irq context rt2x00: Reset antenna RSSI after switch rt2x00: Don't count retries as failure rt2x00: Fix memleak in tx() path mac80211: reorder channel and freq reporting in wext scan report b43: Fix controller restart crash mac80211: fix ieee80211_rx_bss_put/get imbalance net/mac80211: always true conditionals b43: Upload both beacon templates on initial load ...
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] disassembler: fix idte instruction format. [S390] tape: fix race with stack local wait_queue_head_t. [S390] 3270: fix race with stack local wait_queue_head_t. [S390] dasd: use a generic wait_queue for sleep_on [S390] sclp_vt220: fix scheduling while atomic bug. [S390] showmem: Only walk spanned pages. [S390] appldata: prevent cpu hotplug when walking cpu_online_map. [S390] Fix section mismatch warnings. [S390] s390 types: make dma_addr_t 64 bit capable [S390] tape: Fix race condition in tape block device driver [S390] fix sparsemem related compile error with allnoconfig on s390
-
Harvey Harrison authored
In this case we want a constant pointer to constant chars: drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be? Like the error says. drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be? Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Acked-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Henrique de Moraes Holschuh authored
The SW_RADIO code for EV_SW events has a name that is not descriptive enough of its intended function, and could induce someone to think KEY_RADIO is its EV_KEY counterpart, which is false. Rename it to SW_RFKILL_ALL, and document what this event is for. Keep the old name around, to avoid userspace ABI breaks. The SW_RFKILL_ALL event is meant to be used by rfkill master switches. It is not bound to a particular radio switch type, and usually applies to all types. It is semantically tied to master rfkill switches that enable or disable every radio in a system. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
The code would try to free 'report' twice upon input_register_device() failure. Reported-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
llc_sap_rcv was being preceded by skb_set_owner_r, then calling llc_state_process that calls sock_queue_rcv_skb, that in turn calls skb_set_owner_r again making the space allowed to be used by the socket to be leaked, making the socket to get stuck. Fix it by setting skb->sk at llc_sap_rcv and leave the accounting to be done only at sock_queue_rcv_skb. Reported-by:
Dmitry Petukhov <dmgenp@gmail.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin Schwidefsky authored
Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
The correct instruction format of idte is "idte r1,r3,r2" with r1 at bit 24, r3 at bit 16 and r2 at bit 28. Signed-off-by: -
Martin Schwidefsky authored
A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Replace the stack local wait_queue_head_t in tape_do_io and tape_do_io_interruptible with a per device wait queue. Signed-off-by: -
Martin Schwidefsky authored
A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Remove the stack local wait_queue_head_t from raw3270_start_init and use the global raw3270_wait_queue instead. Signed-off-by: -
Stefan Haberland authored
Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_ functions from being referenced by callback_data while it does not exist any more. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
The driver incorrectly assumed that putchar will only be called from schedulable process context and therefore blocked and waited if no free output buffers where available. Since putchar may also be called from BH context this may lead to deadlocks. To fix this just return the number of characters accepted and let the upper layer handle the rest. The console write function will busy wait (sclp_sync_wait) until a buffer is available again. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Convert show_mem() so its nearly the same as on x86/powerpc. Gives us proper locking and we get also rid of the only use of max_mapnr. Also the number of pages was contained in an int which might not be sufficient not too far in the future. Cc: Johannes Weiner <hannes@saeurebad.de> Signed-off-by:
-
Gerald Schaefer authored
Use get_online_cpus() to prevent cpu hotplug in situations where for_each_online_cpu() is called. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
This fixes the last remaining section mismatch warnings in s390 architecture code. It reveals also a real bug introduced by... me with git commit 2069e978 ("[S390] sparsemem vmemmap: initialize memmap.") Calling the generic vmemmap_alloc_block() function to get initialized memory is a nice idea, however that function is __meminit annotated and therefore the function might be gone if we try to call it later. This can happen if a DCSS segment gets added. So basically revert the patch and clear the memmap explicitly to fix the original bug. Signed-off-by:
-
Christian Borntraeger authored
virtio tests with guests larger than 4 GB revealed that the dma_addr_t definition for s390 did not make it into the 64bit world. This patch changes the definition on s390 to have an u64 on 64bit and u32 on 32bit systems. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Michael Holzheu authored
Due to incorrect function call sequence it can happen that a tape block request is finished before the request is taken from the block request queue. The following sequence leads to that condition: * tapeblock_start_request() -> start CCW program * Request finishes -> IO interrupt * tapeblock_end_request() * end_that_request_last() If blkdev_dequeue_request() has not been called before end_that_request_last(), a kernel bug is triggered in end_that_request_last() because the request is still queued. To solve that problem blkdev_dequeue_request() has to be called before starting the CCW program. Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
Hans-Joachim Picht authored
On s390 make allnoconfig fails with the following build error: arch/s390/mm/init.c: In function 'show_mem': arch/s390/mm/init.c:55: error: implicit declaration of function 'pfn_valid' make[1]: *** [arch/s390/mm/init.o] Error 1 make: *** [arch/s390/mm] Error 2 This problem can by fixed ensuring that ARCH_SELECT_MEMORY_MODEL is always turned on. Signed-off-by:
Hans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by:
-
Rusty Russell authored
This is the lguest implementation of the VIRTIO_F_NOTIFY_ON_EMPTY feature. It is currently only published for network devices, but it is turned on for everyone. Signed-off-by:Rusty Russell <rusty@rustcorp.com.au>
-
Rusty Russell authored
virtio allows drivers to suppress callbacks (ie. interrupts) for efficiency (no locking, it's just an optimization). There's a similar mechanism for the host to suppress notifications coming from the guest: in that case, we ignore the suppression if the ring is completely full. It turns out that life is simpler if the host similarly ignores callback suppression when the ring is completely empty: the network driver wants to free up old packets in a timely manner, and otherwise has to use a timer to poll. We have to remove the code which ignores interrupts when the driver has disabled them (again, it had no locking and hence was unreliable anyway). Signed-off-by: -
Christian Borntraeger authored
Since commit 72e61eb4 (virtio: change config to guest endian) config space is no longer fixed endian. Lets change the virtio_blk_config variables. Signed-off-by:
-
Christian Borntraeger authored
Rusty, This patch is a prereq for the virtio_blk blocksize patch, please apply it first. Adding an u32 value to the virtio_blk_config unconvered a small bug the config space defintions: v is a pointer, to we have to use sizeof(*v) instead of sizeof(v). Signed-off-by:
-
Christian Borntraeger authored
Hello Rusty, seems that we still have a problem with virtio_net and the enable_cb callback. During a long running network stress tests with virtio and got the following oops: ------------[ cut here ]------------ kernel BUG at drivers/virtio/virtio_ring.c:230! illegal operation: 0001 [#1] SMP Modules linked in: CPU: 0 Not tainted 2.6.26-rc2-kvm-00436-gc94c08b-dirty #34 Process netserver (pid: 2582, task: 000000000fbc4c68, ksp: 000000000f42b990) Krnl PSW : 0704c00180000000 00000000002d0ec8 (vring_enable_cb+0x1c/0x60) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 000000000ef3d000 0000000010009800 0000000000000000 0000000000419ce0 0000000000000080 000000000000007b 000000000adb5538 000000000ef40900 000000000ef40000 000000000ef40920 0000000000000000 0000000000000005 000000000029c1b0 000000000fea7d18 Krnl Code: 00000000002d0ebc: a7110001 tmll %r1,1 00000000002d0ec0: a7740004 brc 7,2d0ec8 00000000002d0ec4: a7f40001 brc 15,2d0ec6 >00000000002d0ec8: a517fffe nill %r1,65534 00000000002d0ecc: 40103000 sth %r1,0(%r3) 00000000002d0ed0: 07f0 bcr 15,%r0 00000000002d0ed2: e31020380004 lg %r1,56(%r2) 00000000002d0ed8: a7480000 lhi %r4,0 Call Trace: ([<000000000029c0fc>] virtnet_poll+0x290/0x3b8) [<0000000000333fb8>] net_rx_action+0x9c/0x1b8 [<00000000001394bc>] __do_softirq+0x74/0x108 [<000000000010d16a>] do_softirq+0x92/0xac [<0000000000139826>] irq_exit+0x72/0xc8 [<000000000010a7b6>] do_extint+0xe2/0x104 [<0000000000110508>] ext_no_vtime+0x16/0x1a Last Breaking-Event-Address: [<00000000002d0ec4>] vring_enable_cb+0x18/0x60 I looked into the virtio_net code for some time and I think the following scenario happened. Please look at virtnet_poll: [...] /* Out of packets? */ if (received < budget) { netif_rx_complete(vi->dev, napi); if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq)) && napi_schedule_prep(napi)) { vi->rvq->vq_ops->disable_cb(vi->rvq); __netif_rx_schedule(vi->dev, napi); goto again; } } If an interrupt arrives after netif_rx_complete, a second poll routine can run on a different cpu. The second check for napi_schedule_prep would prevent any harm in the network stack, but we have called enable_cb possibly after the disable_cb in skb_recv_done. static void skb_recv_done(struct virtqueue *rvq) { struct virtnet_info *vi = rvq->vdev->priv; /* Schedule NAPI, Suppress further interrupts if successful. */ if (netif_rx_schedule_prep(vi->dev, &vi->napi)) { rvq->vq_ops->disable_cb(rvq); __netif_rx_schedule(vi->dev, &vi->napi); } } That means that the second poll routine runs with interrupts enabled, which is ok, since we can handle additional interrupts. The problem is now that the second poll routine might also call enable_cb, triggering the BUG. The only solution I can come up with, is to remove the BUG statement in enable_cb - similar to disable_cb. Opinions or better ideas where the oops could come from? Signed-off-by: -
Rusty Russell authored
Note that by itself, having a "hardware" random generator does very little: you should probably run "rngd" in your guest to feed this into the kernel entropy pool. Included: virtio_rng: dont use vmalloced addresses for virtio If virtio_rng is build as a module, random_data is an address in vmalloc space. As virtio expects guest real addresses, this can cause any kind of funny behaviour, so lets allocate random_data dynamically with kmalloc. Signed-off-by:
-
Christian Borntraeger authored
Hello Rusty, sometimes it is useful to share a disk (e.g. usr). To avoid file system corruption, the disk should be mounted read-only in that case. This patch adds a new feature flag, that allows the host to specify, if the disk should be considered read-only. Signed-off-by:
-
Rusty Russell authored
Before: root@ubuntu:~# cat /proc/interrupts CPU0 1: 1672 lguest-<NULL> virtio0 2: 1 lguest-<NULL> virtio1 ... After: root@ubuntu:~# cat /proc/interrupts CPU0 1: 2889 lguest-level virtio0 2: 9 lguest-level virtio1 Signed-off-by: -
Rusty Russell authored
Anthony Liguori points out that three different transports use the virtio code, but each one keeps its own counter to set the virtio_device's index field. In theory (though not in current practice) this means that names could be duplicated, and that risk grows as more transports are created. So we move the selection of the unique virtio_device.index into the common code in virtio.c, which has the side-benefit of removing duplicate code. The only complexity is that lguest and S/390 use the index to uniquely identify the device in case of catastrophic failure before register_virtio_device() is called: now we use the offset within the descriptor page as a unique identifier for the printks. Signed-off-by: -
Rusty Russell authored
The common virtio code sets the bus_id, overriding anything virtio_pci sets anyway. Signed-off-by: -
Rusty Russell authored
Chris Lalancette <clalance@redhat.com> points out that virtio.c sets all device names to '0', '1', etc, which looks silly in /proc/interrupts. We change this from '%d' to 'virtio%d'. Signed-off-by: -
Chris Lalancette authored
Fix a modprobe virtio_blk ; rmmod virtio_blk ; modprobe virtio_blk crash; this was basically because we weren't doing "del_gendisk()" in the remove path. Signed-off-by:Chris Lalancette <clalance@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (moved del_gendisk up)
-
Rusty Russell authored
Thanks to Jon Corbet & LWN. Only took me a day to join the dots. Host->Guest netcat before (with unnecessily large receive buffers): 1073741824 bytes (1.1 GB) copied, 24.7528 seconds, 43.4 MB/s After: 1073741824 bytes (1.1 GB) copied, 17.6369 seconds, 60.9 MB/s Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: driver-core: prepare for 2.6.27 api change by adding dev_set_name
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: EHCI: fix performance regression" USB: fsl_usb2_udc: fix recursive lock USB: usb-serial: option: Don't match Huawei driver CD images USB: pl2303: another product ID USB: add another scanner quirk USB: Add support for ROKR W5 in unusual_devs.h USB: Fix M600i unusual_devs entry USB: usb-storage: unusual_devs update for Cypress ATACB USB: EHCI: fix performance regression USB: EHCI: fix bug in Iso scheduling USB: EHCI: fix remote-wakeup regression USB: EHCI: suppress unwanted error messages USB: EHCI: fix up root-hub TT mess USB: add all configs to the "descriptors" attribute USB: fix possible deadlock involving sysfs attributes USB: Firmware loader driver for USB Apple iSight camera USB: FTDI_SIO : Add support for Matrix Orbital PID Range
-
Stephen Rothwell authored
Create the dev_set_name function now so that various subsystems can start changing over to it before other changes in 2.6.27 will make it compulsory. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
