- 25 Feb, 2010 1 commit
-
-
Jiri Kosina authored
Conflicts: drivers/hid/Kconfig
-
- 17 Feb, 2010 2 commits
-
-
Jiri Kosina authored
Move the initialization of USB interface pointers from _start() over to _probe() callback, which is where it belongs. This fixes case where interface is NULL when parsing of report descriptor fails. LKML-Reference: <20100213135720.603e5f64@neptune.home> Reported-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
Now that joystick button usages can expand over 15 buttons, we have to properly mask out the code from hid usage to cover the whole 0xffff available space. Reported-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
- 16 Feb, 2010 4 commits
-
-
Rafi Rubin authored
Add DOUBLETAP to events emitted when in single touch only mode. Users with a single touch firmware report not seeing the DOUBLETAP events; this is a side effect of dropping old mapping for confidence. The confidence mapping may be fine for singletouch mode but causes problems in multitouch mode. Signed-off-by:
Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by:
-
Rafi Rubin authored
This cleans up the identification of multitouch groups and enables the end of group sync. Taps are now explicitly handled to adjust for the changes in the event stream in multitouch mode. Added triple and quad tap for the benefit of tools that recognize different tap types but do not have full multi touch support. This cleans up the behavior particularly for the latest firmware, which didn't work particularly well with the older version of the driver. In this form, when multitouch is active, both mt and st events will come out of the "N-Trig MultiTouch" device. And when its not st events will come out of "N-Trig Touchscreen". Signed-off-by:
-
Rafi Rubin authored
With the pen and touch split apart, we no longer need to inject additional tool switching events. Signed-off-by:
-
Rafi Rubin authored
Added a quirk to enable distinct input devices. The digitizer utilizes three inputs to represent pen, multitouch and a normal touch screen. With the Pen partitioned, it behaves well and does not need special handling. Also, I set names to the input devices to clarify the functions of the various inputs. Signed-off-by:
-
- 12 Feb, 2010 1 commit
-
-
Oliver Neukum authored
Some devices do not react to a control request (seen on APC UPS's) resulting in a slow stream of messages, "generic-usb ... control queue full". Therefore request needs a timeout. Cc: stable@kernel.org Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
David Fries <david@fries.net> Signed-off-by:
-
- 11 Feb, 2010 1 commit
-
-
Michael Poole authored
Use proper values to initialize bool configuration variables, tabs rather than spaces, no braces for one-line else clause, __set_bit() when the operation doesn't have to be atomic, input_set_abs_params() rather than writing the fields directly, and call hid_hw_stop() when appropriate to handle failures in the probe. Signed-off-by:
Michael Poole <mdpoole@troilus.org> Signed-off-by:
-
- 10 Feb, 2010 7 commits
-
-
Jiri Kosina authored
MODULE_VERSION doesn't make too much sense for drivers merged into main tree, as git is much better tracking revisions than any developer might ever be. Signed-off-by: -
Jiri Kosina authored
Make Apple MagicMouse Kconfig entry consistent with other dirvers. Also expand the tristate text a little bit more, so that it doesn't clash with already existing HID_APPLE. Signed-off-by: -
Michael Poole authored
The Magic Mouse requires that a driver send an unlock Report(Feature) command, similar to the Wacom wireless tablet and Sixaxis controller quirks. This turns on an Input Report that isn't published in the input Report descriptor that contains touch data (and usually overrides the normal motion and click Report). Because the mouse has only one switch and no scroll wheel, the driver (under control of parameters) emulates a middle button and scroll wheel. User space could also ignore and/or re-synthesize those events based on the reported events. Some user-space tools to talk to the mouse directly (that is, when it is not associated with the host's HIDP stack) are at http://github.com/entrope/linux-magicmouseSigned-off-by:
-
Michael Poole authored
The Apple Magic Mouse (and probably other devices) publish reports that are not called out in their HID report descriptors -- they only send them when enabled through other writes to the device. This allows a driver to handle these unlisted reports. Signed-off-by:
-
Stephane Chatty authored
Added support for MosArt dual-touch panels, present in the Asus T91MT notebook. Signed-off-by:
Stephane Chatty <chatty@enac.fr> Signed-off-by:
-
Stephane Chatty authored
Added pressure handling for Stantum multitouch panels Signed-off-by:
-
Stephane Chatty authored
Fixed stupid copy-paste bug in touchscreen emulation for the Stantum multitouch panel: a flag was reset just before being tested. Signed-off-by:
-
- 09 Feb, 2010 2 commits
-
-
Bastien Nocera authored
Signed-off-by: -
Leo P White authored
Adding a mapping for the 'AL Network Chat' usage from the 'Consumer' usage page (USB HID Usage Tables v1.11). This usage is used by some keyboards for a multimedia key. Signed-off-by:
Leo P White <lpw25@cam.ac.uk> Signed-off-by:
-
- 04 Feb, 2010 1 commit
-
-
Thadeu Lima de Souza Cascardo authored
This device generates ABS_Z and ABS_RX events, while it should be generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves this issue. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by:
Daniel Oliveira Nascimento <don@syst.com.br> [jkosina@suse.cz: fixed blacklist ordering while resolving conflict] [jkosina@suse.cz: fixed typo to make it compile] Signed-off-by:
-
- 03 Feb, 2010 21 commits
-
-
Jiri Kosina authored
For historical reasons, we don't have most of the in-tree drivers residing on hid-bus properly selectable in kernel configuration unless CONFIG_EMBEDDED is set. This has been introduced on Linus' request from 14 Oct === As to the Kconfig options - do they really add so much space that you need to ask for the quirks? You didn't use to. Can you make the questions depend on EMBEDDED, or at least on the HID_COMPAT thing or whatever? === This still makes perfect sense for small and tiny drivers, which just fix report descriptors, fix up HID->input mappings that slightly violates HUT standard, send one extra packet to the device that is needed before it becomes functional, etc. Since then, we have been gathering more and more HID-bus drivers, which are full-fledged drivers. For these, the size argument becomes more valid. Plus the devices are much more special than "just violates HID specification in this one or two tiny unimportant points". Therefore I am marking such drivers as properly selectable no matter the setting of CONFIG_EMBEDDED, while keeping all the small and tiny ones compiled by default. Signed-off-by: -
Jiri Kosina authored
With Wacom tablet mode-setting moved from userspace into kernel, we don't have to consider failures of device queries through the _raw callback as hard failure, as the driver can safely continue anyway. This is consistent with the current USB driver in wacom_sys.c Reported-by:
Ping Cheng <pinglinux@gmail.com> Signed-off-by:
-
Bastien Nocera authored
Now that hid_output_raw_report works, port the PS3 Sixaxis Bluetooth quirk from user-space, into kernel-space. Signed-off-by:
Bastien Nocera <hadess@hadess.net> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Bastien Nocera authored
The hid-wacom driver required user-space to poke at the tablet to make it send data about the cursor location. This patch makes it do the same thing but in the kernel. Signed-off-by:
-
Jiri Kosina authored
In commit 2da31939 ("Bluetooth: Implement raw output support for HIDP layer"), support for Bluetooth hid_output_raw_report was added, but it pushes the data to the intr socket instead of the ctrl one. This has been fixed by 6bf8268f ("Bluetooth: Use the control channel for raw HID reports") Still, it is necessary to distinguish whether the report in question should be either FEATURE or OUTPUT. For this, we have to extend the generic HID API, so that hid_output_raw_report() callback provides means to specify this value so that it can be passed down to lower level hardware drivers (currently Bluetooth and USB). Based on original patch by Bastien Nocera <hadess@hadess.net> Acked-by:
-
Alex Neblett authored
Added support for the Pixart Imaging Inc. Optical Touch Screen found in the MSI AE2220 and other new all in one computers to the Quanta Optical Touch dual-touch panel driver found in the latest git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git. Signed-off-by:
Alex Neblett <alexneblett01@yahoo.com> Signed-off-by:
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: kernel/cred.c: use kmem_cache_free
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (23 commits) connector: Delete buggy notification code. be2net: use eq-id to calculate cev-isr reg offset Bluetooth: Use the control channel for raw HID reports Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011 Bluetooth: Redo checks in IRQ handler for shared IRQ support Bluetooth: Fix memory leak in L2CAP Bluetooth: Remove double free of SKB pointer in L2CAP cdc_ether: Partially revert "usbnet: Set link down initially ..." be2net: Fix memset() arg ordering. bonding: bond_open error return value ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early ixgbe: set the correct DCB bit for pg tx settings igbvf: fix issue w/ mapped_as_page being left set after unmap drivers/net: ks8851_mll ethernet network driver be2net: Bug fix to support newer generation of BE ASIC starfire: clean up properly if firmware loading fails mac80211: fix NULL pointer dereference when ftrace is enabled netfilter: ctnetlink: fix expectation mask dump ipv6: conntrack: Add member of user to nf_ct_frag6_queue structure ath9k: fix eeprom INI values override for 2GHz-only cards ...
-
Thadeu Lima de Souza Cascardo authored
This is the counterpart to cba76717 ("pktcdvd: remove broken dev_t export of class devices"). Device is not registered using dev_t, so it should not be destroyed using device_destroy which looks up the device by dev_t. This will fail and adding the device again will fail with the "duplicate name" error. This is fixed using device_unregister instead of device_destroy. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Shaohui Zheng authored
Newly added memory can not be accessed via /dev/mem, because we do not update the variables high_memory, max_pfn and max_low_pfn. Add a function update_end_of_memory_vars() to update these variables for 64-bit kernels. [akpm@linux-foundation.org: simplify comment] Signed-off-by:
Shaohui Zheng <shaohui.zheng@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Li Haicheng <haicheng.li@intel.com> Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Reviewed-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Anton Blanchard authored
init_fault_attr_entries() should be init_fault_attr_dentries(). cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries(). Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Jeff Mahoney authored
hugetlb_sysfs_add_hstate is called by hugetlb_register_node directly during init and also indirectly via sysfs after init. This patch removes the __init tag from hugetlb_sysfs_add_hstate. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by:
-
Richard Röjfors authored
Move the ulite_console_setup to the .devinit section since it might be called on probe, which is in devinit. Fixes the crash below where the uartlite hw is probed after the .init section is freed from the kernel. uartlite: ttyUL0 at MMIO 0xc8000100 (irq = 30) is a uartlite BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c176720e>] ulite_console_setup+0x6f/0xa8 *pdpt = 0000000036fb0001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1f.1/host0/uevent Modules linked in: puffin(+) serio_raw Pid: 151, comm: modprobe Not tainted (2.6.31.5-1.0.b1-b1 #1) POULSBO EIP: 0060:[<c176720e>] EFLAGS: 00010246 CPU: 0 EIP is at ulite_console_setup+0x6f/0xa8 EAX: c16ec824 EBX: c16ec824 ECX: c176719f EDX: 00000000 ESI: 00000000 EDI: c17b42c4 EBP: f6fd1cf0 ESP: f6fd1cd8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 151, ti=f6fd0000 task=f6fa1020 task.ti=f6fd0000) Stack: c1031f51 00000000 00000000 00000246 c182237c f7742000 f6fd1d5c c11fd316 <0> c16ec85c f77420d4 0000001e 00000000 00000000 c1633e78 4f494d4d 63783020 <0> 30303038 00303031 f6fd1d3c c10e0786 f6fd1d48 00000000 f6fd1d48 00000000 Call Trace: [<c1031f51>] ? register_console+0xf6/0x1fc [<c11fd316>] ? uart_add_one_port+0x237/0x2bb [<c10e0786>] ? sysfs_add_one+0x13/0xd3 [<c10e142f>] ? sysfs_do_create_link+0xba/0xfc [<c146f200>] ? ulite_probe+0x198/0x1eb [<c12064ee>] ? platform_drv_probe+0xc/0xe [<c120597b>] ? driver_probe_device+0x79/0x105 [<c1205a8e>] ? __device_attach+0x28/0x30 [<c120511f>] ? bus_for_each_drv+0x3d/0x67 [<c1205af9>] ? device_attach+0x44/0x58 [<c1205a66>] ? __device_attach+0x0/0x30 [<c1204fb8>] ? bus_probe_device+0x1f/0x34 [<c1203e68>] ? device_add+0x385/0x4c0 [<c148491f>] ? _write_unlock+0x8/0x1f [<c1206aac>] ? platform_device_add+0xd9/0x11c [<c120c685>] ? mfd_add_devices+0x165/0x1bc [<f831b378>] ? puffin_probe+0x2d0/0x390 [puffin] [<c11a08ef>] ? pci_match_device+0xa0/0xa7 [<c11a07bc>] ? local_pci_probe+0xe/0x10 [<c11a11db>] ? pci_device_probe+0x43/0x66 [<c120597b>] ? driver_probe_device+0x79/0x105 [<c1205a4a>] ? __driver_attach+0x43/0x5f [<c120535d>] ? bus_for_each_dev+0x3d/0x67 [<c1205852>] ? driver_attach+0x14/0x16 [<c1205a07>] ? __driver_attach+0x0/0x5f [<c1204dea>] ? bus_add_driver+0xf9/0x220 [<c1205c8f>] ? driver_register+0x8b/0xeb [<c11a1518>] ? __pci_register_driver+0x43/0x9f [<c10477ef>] ? __blocking_notifier_call_chain+0x40/0x4c [<f831f000>] ? puffin_init+0x0/0x48 [puffin] [<f831f017>] ? puffin_init+0x17/0x48 [puffin] [<c1001139>] ? do_one_initcall+0x4c/0x131 [<c105607b>] ? sys_init_module+0xa7/0x1b7 [<c1002a61>] ? syscall_call+0x7/0xb Code: 6e 74 00 00 00 92 33 00 00 18 00 0e 01 73 79 6e 63 65 2d 72 65 67 69 73 74 72 79 0c 00 49 32 00 00 14 00 09 01 61 6c 73 61 2d 69 <6e> 66 6f 00 00 00 42 37 00 00 10 00 07 01 6b 69 6c 6c 61 6c 6c EIP: [<c176720e>] ulite_console_setup+0x6f/0xa8 SS:ESP 0068:f6fd1cd8 CR2: 0000000000000000 Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Acked-by:
Peter Korsgaard <jacmet@sunsite.dk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
The probe function passes a pointer to a struct fb_info to platform_set_drvdata(), so don't interpret the return value of platform_get_drvdata() as a pointer to struct imxfb_info. The original imxfb_info *fbi backlight_power was NULL but in imxfb_suspend it was 4 resulting in an oops as imxfb_suspend calls imxfb_disable_controller(fbi) which in turn has if (fbi->backlight_power) fbi->backlight_power(0); Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Sascha Hauer <kernel@pengutronix.de> Cc: <stable@kernel.org> Signed-off-by:
-
Li Zefan authored
In cgroup_create(), if alloc_css_id() returns failure, the errno is not propagated to userspace, so mkdir will fail silently. To trigger this bug, we mount blkio (or memory subsystem), and create more then 65534 cgroups. (The number of cgroups is limited to 65535 if a subsystem has use_id == 1) # mount -t cgroup -o blkio xxx /mnt # for ((i = 0; i < 65534; i++)); do mkdir /mnt/$i; done # mkdir /mnt/65534 (should return ENOSPC) # Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Acked-by:
Paul Menage <menage@google.com> Acked-by:
-
Hui Zhu authored
When I use markup_oops.pl parse a x8664 oops, I got: objdump: --start-address: bad number: NaN No matching code found This is because: main::(./m.pl:228): open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump"; DB<3> p $decodestart NaN This NaN is from: main::(./m.pl:176): my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); DB<2> p $func_offset 0x175 There is already a "0x" in $func_offset, another 0x makes it a NaN. The $func_offset is from line: if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } I make a patch to change "(0x[0-9a-f]+)\/0x[a-f0-9]/)" to "0x([0-9a-f]+)\/0x[a-f0-9]/)". Signed-off-by:Hui Zhu <teawater@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Richard Kennedy authored
When git has been set to always use color in .gitconfig then I get the warning message Bad divisor in main::vcs_assign: 0 This is caused by vcs_file_signoffs not matching any commits due to the pattern not understand the colour codes. Fix this by telling git log to never use colour. Signed-off-by:Richard Kennedy <richard@rsk.demon.co.uk> Acked-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Wu Fengguang authored
write_kmem() used to assume vwrite() always return the full buffer length. However now vwrite() could return 0 to indicate memory hole. This creates a bug that "buf" is not advanced accordingly. Fix it to simply ignore the return value, hence the memory hole. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Otherwise vmalloc_to_page() will BUG(). This also makes the kmem read/write implementation aligned with mem(4): "References to nonexistent locations cause errors to be returned." Here we return -ENXIO (inspired by Hugh) if no bytes have been transfered to/from user space, otherwise return partial read/write results. Signed-off-by:
-
anfei zhou authored
The cache alias problem will happen if the changes of user shared mapping is not flushed before copying, then user and kernel mapping may be mapped into two different cache line, it is impossible to guarantee the coherence after iov_iter_copy_from_user_atomic. So the right steps should be: flush_dcache_page(page); kmap_atomic(page); write to page; kunmap_atomic(page); flush_dcache_page(page); More precisely, we might create two new APIs flush_dcache_user_page and flush_dcache_kern_page to replace the two flush_dcache_page accordingly. Here is a snippet tested on omap2430 with VIPT cache, and I think it is not ARM-specific: int val = 0x11111111; fd = open("abc", O_RDWR); addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); *(addr+0) = 0x44444444; tmp = *(addr+0); *(addr+1) = 0x77777777; write(fd, &val, sizeof(int)); close(fd); The results are not always 0x11111111 0x77777777 at the beginning as expected. Sometimes we see 0x44444444 0x77777777. Signed-off-by:Anfei <anfei.zhou@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: <linux-arch@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by:
-
Randy Dunlap authored
Fix kfifo kernel-doc warnings: Warning(kernel/kfifo.c:361): No description found for parameter 'total' Warning(kernel/kfifo.c:402): bad line: @ @lenout: pointer to output variable with copied data Warning(kernel/kfifo.c:412): No description found for parameter 'lenout' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefani Seibold <stefani@seibold.net> Signed-off-by:
-
