- 17 May, 2011 2 commits
-
-
Borislav Petkov authored
Trying to enable the local APIC timer on early K8 revisions uncovers a number of other issues with it, in conjunction with the C1E enter path on AMD. Fixing those causes much more churn and troubles than the benefit of using that timer brings so don't enable it on K8 at all, falling back to the original functionality the kernel had wrt to that. Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com> Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Joerg-Volker-Peetz <jvpeetz@web.de> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.orgSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Borislav Petkov authored
This reverts commit e20a2d20, as it crashes certain boxes with specific AMD CPU models. Moving the lower endpoint of the Erratum 400 check to accomodate earlier K8 revisions (A-E) opens a can of worms which is simply not worth to fix properly by tweaking the errata checking framework: * missing IntPenging MSR on revisions < CG cause #GP: http://marc.info/?l=linux-kernel&m=130541471818831 * makes earlier revisions use the LAPIC timer instead of the C1E idle routine which switches to HPET, thus not waking up in deeper C-states: http://lkml.org/lkml/2011/4/24/20 Therefore, leave the original boundary starting with K8-revF. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 16 May, 2011 1 commit
-
-
Youquan Song authored
This patch fixes a bug reported by a customer, who found that many unreasonable error interrupts reported on all non-boot CPUs (APs) during the system boot stage. According to Chapter 10 of Intel Software Developer Manual Volume 3A, Local APIC may signal an illegal vector error when an LVT entry is set as an illegal vector value (0~15) under FIXED delivery mode (bits 8-11 is 0), regardless of whether the mask bit is set or an interrupt actually happen. These errors are seen as error interrupts. The initial value of thermal LVT entries on all APs always reads 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI sequence to them and LVT registers are reset to 0s except for the mask bits which are set to 1s when APs receive INIT IPI. When the BIOS takes over the thermal throttling interrupt, the LVT thermal deliver mode should be SMI and it is required from the kernel to keep AP's LVT thermal monitoring register programmed as such as well. This issue happens when BIOS does not take over thermal throttling interrupt, AP's LVT thermal monitor register will be restored to 0x10000 which means vector 0 and fixed deliver mode, so all APs will signal illegal vector error interrupts. This patch check if interrupt delivery mode is not fixed mode before restoring AP's LVT thermal monitor register. Signed-off-by: Youquan Song <youquan.song@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yong Wang <yong.y.wang@intel.com> Cc: hpa@linux.intel.com Cc: joe@perches.com Cc: jbaron@redhat.com Cc: trenn@suse.de Cc: kent.liu@intel.com Cc: chaohong.guo@intel.com Cc: <stable@kernel.org> # As far back as possible Link: http://lkml.kernel.org/r/1303402963-17738-1-git-send-email-youquan.song@intel.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
- 13 May, 2011 1 commit
-
-
Julia Lawall authored
b may be added to a list, but is not removed before being freed in the case of an error. This is done in the corresponding deallocation function, so the code here has been changed to follow that. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E1,E2; identifier l; @@ *list_add(&E->l,E1); ... when != E1 when != list_del(&E->l) when != list_del_init(&E->l) when != E = E2 *kfree(E);// </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/1305294731-12127-1-git-send-email-julia@diku.dkSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
- 12 May, 2011 1 commit
-
-
Cliff Wickman authored
This is a fix for the SGI Altix-UV Broadcast Assist Unit code, which is used for TLB flushing. Certain hardware configurations (that customers are ordering) cause nasids (numa address space id's) to be non-consecutive. Specifically, once you have more than 4 blades in a IRU (Individual Rack Unit - or 1/2 rack) but less than the maximum of 16, the nasid numbering becomes non-consecutive. This currently results in a 'catastrophic error' (CATERR) detected by the firmware during OS boot. The BAU is generating an 'INTD' request that is targeting a non-existent nasid value. Such configurations may also occur when a blade is configured off because of hardware errors. (There is one UV hub per blade.) This patch is required to support such configurations. The problem with the tlb_uv.c code is that is using the consecutive hub numbers as indices to the BAU distribution bit map. These are simply the ordinal position of the hub or blade within its partition. It should be using physical node numbers (pnodes), which correspond to the physical nasid values. Use of the hub number only works as long as the nasids in the partition are consecutive and increase with a stride of 1. This patch changes the index to be the pnode number, thus allowing nasids to be non-consecutive. It also provides a table in local memory for each cpu to translate target cpu number to target pnode and nasid. And it improves naming to properly reflect 'node' and 'uvhub' versus 'nasid'. Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/E1QJmxX-0002Mz-Fk@eag09.americas.sgi.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
- 10 May, 2011 3 commits
-
-
Jack Steiner authored
This fixes problems seen on UV systems handling NMIs from the node controller. I isolated the "dazed..." messages that I saw earlier to a bug in the BMC on our platform. It was sending NMIs w/o properly setting a register that indicated the source of NMI. So rather than _assuming_ any unhandled NMI came from the UV system maintenance console (SMC), add a check to verify that the SMC actually sent the NMI. Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: gorcunov@gmail.com Cc: dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Linus Torvalds authored
-
Hugh Dickins authored
Commit a626ca6a ("vm: fix vm_pgoff wrap in stack expansion") fixed the case of an expanding mapping causing vm_pgoff wrapping when you had downward stack expansion. But there was another case where IA64 and PA-RISC expand mappings: upward expansion. This fixes that case too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 May, 2011 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6Linus Torvalds authored
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915/lvds: Only act on lid notify when the device is on drm/i915: fix intel_crtc_clock_get pipe reads after "cleanup cleanup" drm/i915: Only enable the plane after setting the fb base (pre-ILK) drm/i915/dp: Be paranoid in case we disable a DP before it is attached drm/i915: Release object along create user fb error path
-
Mikulas Patocka authored
Linux kernel excludes guard page when performing mlock on a VMA with down-growing stack. However, some architectures have up-growing stack and locking the guard page should be excluded in this case too. This patch fixes lvm2 on PA-RISC (and possibly other architectures with up-growing stack). lvm2 calculates number of used pages when locking and when unlocking and reports an internal error if the numbers mismatch. [ Patch changed fairly extensively to also fix /proc/<pid>/maps for the grows-up case, and to move things around a bit to clean it all up and share the infrstructure with the /proc bits. Tested on ia64 that has both grow-up and grow-down segments - Linus ] Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Tested-by: Tony Luck <tony.luck@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: eeepc-laptop: Use ACPI handle to identify rfkill port [PATCH] sony-laptop: limit brightness range to DSDT provided ones sony-laptop: report failures on setting LCD brightness thinkpad-acpi: module autoloading for newer Lenovo ThinkPads.
-
Alex Williamson authored
If we're using vga switcheroo, the device may be turned off and poking it can return random state. This provokes an OOPS fixed separately by 8ff887c847 (drm/i915/dp: Be paranoid in case we disable a DP before it is attached). Trying to use and respond to events on a device that has been turned off by the user is in principle a silly thing to do. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
-
Chris Wilson authored
Despite the fixes in 548f245b (drm/i915: fix per-pipe reads after "cleanup"), we missed one neighbouring read that was mistakenly replaced with the reg value in 9db4a9c7 (drm/i915: cleanup per-pipe reg usage). This was preventing us from correctly determining the mode the BIOS left the panel in for machines that neither have an OpRegion nor access to the VBT, (e.g. the EeePC 700). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
-
Chris Wilson authored
When enabling the plane, it is helpful to have already pointed that plane to valid memory or else we may incur the wrath of a PGTBL_ER. This code preserved the behaviour from the bad old days for unknown reasons... Found by assert_fb_bound_for_plane(). References: https://bugs.freedesktop.org/show_bug.cgi?id=36246Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Fix CODEC DAI names for Goni ASoC: Fix CODEC name in Goni davinci-mcasp: fix _CBM_CFS pin directions davinci-mcasp: fix _CBM_CFS hw_params davinci-mcasp: use bitfield definitions for PDIR ASoC: davinci-mcasp: correct tdm_slots limit
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add pci id to acer travelmate quirk for 5730 drm/radeon: fix order of doing things in radeon_crtc_cursor_set drm: mm: fix debug output drm/radeon/kms: ATPX switcheroo fixes drm/nouveau: Fix a crash at card takedown for NV40 and older cards
-
Linus Torvalds authored
* hpfs: HPFS: Remove unused variable HPFS: Move declaration up, so that there are no out-of-scope pointers HPFS: Fix some unaligned accesses HPFS: Fix endianity. Make hpfs work on big-endian machines HPFS: Implement fsync for hpfs HPFS: Fix a bug that filesystem was not marked dirty when remounting it HPFS: Restrict uid and gid to 16-bit values HPFS: When marking or clearing the dirty bit, sync the filesystem HPFS: Use types with defined width HPFS: Remove mark_inode_dirty HPFS: Remove CR/LF conversion option HPFS: Remove remaining locks HPFS: Introduce a global mutex and lock it on every callback from VFS. HPFS: Make HPFS compile on preempt and SMP
-
Mikulas Patocka authored
Remove unused variable Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Move declaration up, so that there are no out-of-scope pointers Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Fix some unaligned accesses Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Fix endianity. Make hpfs work on big-endian machines. Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Implement fsync for hpfs. Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Fix a bug that filesystem was not marked dirty when remounting it Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Restrict uid and gid to 16-bit values. HPFS stores only 2 bytes in the EAs. Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
When marking or clearing the dirty bit, sync the filesystem Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Use types with defined width Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Remove mark_inode_dirty HPFS doesn't use kernel's dirty inode indicator anyway because writing an inode requires directory's mutex. Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Remove CR/LF conversion option It is unused anyway. It was used on 2.2 kernels or so. Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Remove remaining locks Because of a new global per-fs lock, no other locks are needed Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Introduce a global mutex and lock it on every callback from VFS. Performance doesn't matter, reviewing the whole code for locking correctness would be too complicated, so simply lock it all. Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Make HPFS compile on preempt and SMP Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Garrett authored
The ACPI notification we get from rfkill events on these machines gives us all the information we need to identify the port that's changed. Do so rather than assuming that it's always bus 1. Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Mattia Dongili authored
The new style brightness control provides an operating range of 9 values (seems consistent over a large number of models sharing the same brightness control methods). Read and use the minimum and maximum values to limit the backlight interface between those boundaries. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Mattia Dongili authored
Check if we were successful in setting the requested brightness and report failure in that case. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Manoj Iyer authored
The newer Lenovo ThinkPads have HKEY HID of LEN0068 instead of IBM0068. Added new HID so that thinkpad_acpi module will auto load on these newer Lenovo ThinkPads. Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: stable@kernel.org Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
- 08 May, 2011 5 commits
-
-
Alex Deucher authored
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=34082 Reported by: Sampo Laaksonen <zhamahn@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Ilija Hadzic authored
if object pin or object lookup in radeon_cursor_set fail, the function could leave inconsistent mouse width and hight values in radeon_crtc fixed by moving cursor width and height assignments after all checks have passed Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Daniel Vetter authored
The looping helper didn't do anything due to a superficial semicolon. Furthermore one of the two dump functions suffered from copy&paste fail. While staring at the code I've also noticed that the replace helper (currently unused) is a bit broken. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next: drm/nouveau: Fix a crash at card takedown for NV40 and older cards
-
Alex Deucher authored
When we switch the display mux, also switch the i2c mux. Also use the start and finish methods to let the sbios know that the switch is happening. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=35398Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-