- 10 Mar, 2023 7 commits
-
-
Linus Walleij authored
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Linus Walleij authored
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Linus Walleij authored
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Linus Walleij authored
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Tested-by: Joel Stanley <joel@jms.id.au> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Joel Stanley authored
The driver was implemented in a way that made the irqchip optional, if a irq was not present in the device tree. However, all of the device trees have always had an irq, so the optional-ness has never been used. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Linus Walleij authored
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Linus Walleij authored
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
- 09 Mar, 2023 1 commit
-
-
Yinbo Zhu authored
WARNING: unmet direct dependencies detected for OF_GPIO Depends on [n]: GPIOLIB [=y] && OF [=n] && HAS_IOMEM [=y] Selected by [y]: - GPIO_LOONGSON_64BIT [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && (LOONGARCH || COMPILE_TEST [=y]) Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303091728.UUe6LWye-lkp@intel.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
- 08 Mar, 2023 3 commits
-
-
Andy Shevchenko authored
There is nothing specific about gpio_bus_match(), so we may simply move it to the top of the file and get rid of forward declaration. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Andy Shevchenko authored
GPIO device's fwnode should be accessed via dev_fwnode(). Make sure that gpiochip_setup_dev() follows that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Bartosz Golaszewski authored
Merge tag 'intel-gpio-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next intel-gpio for v6.4-1 * Remove some of the legacy APIs that are not used anymore * Clean up headers in the GPIO library and drivers The following is an automated git shortlog grouped by driver: aggregator: - Add missing header(s) ARM: - s3c64xx: Use the right include - orion/gpio: Use the right include gpiolib: - Clean up headers - Group forward declarations in consumer.h - Deduplicate forward declarations in consumer.h - Drop unused forward declaration from driver.h - split of_mm_gpio_chip out of linux/of_gpio.h - split linux/gpio/driver.h out of linux/gpio.h - remove legacy gpio_export() - remove gpio_set_debounce() - remove asm-generic/gpio.h - coldfire: remove custom asm/gpio.h - remove empty asm/gpio.h files - Make the legacy <linux/gpio.h> consumer-only hte: - tegra-194: Use proper includes reg: - Add missing header(s) regmap: - Add missing header(s)
-
- 06 Mar, 2023 26 commits
-
-
Andy Shevchenko authored
There is a few things done: - include only the headers we are direct user of - when pointer is in use, provide a forward declaration - add missing headers - group generic headers and subsystem headers - sort each group alphabetically Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
For better maintenance group the forward declarations together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
The struct fwnode_handle pointer is used in both branches of ifdeffery, no need to have a copy of the same in each of them, just make it global. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
There is no struct device_node pointers anywhere in the header, drop unused forward declaration. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, split out the GPIO group of headers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, split out the GPIO group of headers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, drop unused linux/gpio.h and split out the GPIO group of headers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Arnd Bergmann authored
This is a rarely used feature that has nothing to do with the client-side of_gpio.h. Split it out with a separate header file and Kconfig option so it can be removed on its own timeline aside from removing the of_gpio consumer interfaces. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Arnd Bergmann authored
Almost all gpio drivers include linux/gpio/driver.h, and other files should not rely on includes from this header. Remove the indirect include from here and include the correct headers directly from where they are used. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org>
-
Arnd Bergmann authored
There are only a handful of users of gpio_export() and related functions. As these are just wrappers around the modern gpiod_export() helper, remove the wrappers and open-code the gpio_to_desc in all callers to shrink the legacy API. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Arnd Bergmann authored
gpio_set_debounce() only has a single user, which is trivially converted to gpiod_set_debounce(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Arnd Bergmann authored
The asm-generic/gpio.h file is now always included when using gpiolib, so just move its contents into linux/gpio.h with a few minor simplifications. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Arnd Bergmann authored
Now that coldfire is the only user of a custom asm/gpio.h, it seems better to remove this as well, and have the same interface everywhere. For the gpio_get_value()/gpio_set_value()/gpio_to_irq(), gpio_cansleep() functions, the custom version is only a micro-optimization to inline the function for constant GPIO numbers. However, in the coldfire defconfigs, I was unable to find a single instance where this micro-optimization was even used, and according to Geert the only user appears to be the QSPI chip that is disabled everywhere. The custom gpio_request_one() function is even less useful, as it is guarded by an #ifdef that is never true. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Arnd Bergmann authored
The arm and sh versions of this file are identical to the generic versions and can just be removed. The drivers that actually use the sh3 specific version also include cpu/gpio.h directly, with the exception of magicpanelr2, which is easily fixed. This leaves coldfire as the only gpio driver that needs something custom for gpiolib. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
-
Linus Walleij authored
The legacy <linux/gpio.h> header was an all-inclusive header used by drivers and consumers alike. After eliminating the last users of the driver defines, we can drop the inclusion of the <linux/gpio/driver.h> header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Linus Walleij authored
The test driver uses the gpiod consumer API so include the right <linux/gpio/consumer.h> header. This may cause a problem with struct of_device_id being implcitly pulled in by the legacy header <linux/gpio.h> so include <linux/mod_devicetable.h> explicitly as well. While at it, drop explicit moduleparam.h (it's included with module.h) and sort the headers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Linus Walleij authored
The file s3c64xx.c is including <linux/gpio.h> despite using no symbols from the file, however it needs it to implicitly bring in of_have_populated_dt() so include <linux/of.h> explicitly instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Linus Walleij authored
This is a GPIO driver so include <linux/gpio/driver.h> and not the legacy <linux/gpio.h> header. Switch a single call to the legacy API and use <linux/gpio/consumer.h> as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Nick Alcock authored
Since commit 8b41fc44 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Nick Alcock authored
Since commit 8b41fc44 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-unisoc@lists.infradead.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Trevor Woerner authored
Provide more guidance to differentiate between recommendations for names of lines which are hard-wired to on-board devices, versus recommendations for names of lines which are connected to general-purpose pin headers. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Linus Walleij authored
The Spreadtrum PMIC EIC interrupt controller is part of an MFD expander and should thus be in the MFD GPIO expander menu section with the rest. Move it. Cc: Cixi Geng <cixi.geng1@unisoc.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
William Breathitt Gray authored
The mask_buf_def argument provides a mask of all the maskable lines. Utilize mask_buf_def rather than hardcode an "all_masked" mask. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Nick Alcock authored
Since commit 8b41fc44 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Yinbo Zhu authored
The Loongson platforms GPIO controller contains 60 GPIO pins in total, 4 of which are dedicated GPIO pins, and the remaining 56 are reused with other functions. Each GPIO can set input/output and has the interrupt capability. This driver added support for Loongson GPIO controller and support to use DTS or ACPI to descibe GPIO device resources. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Liu Peibao <liupeibao@loongson.cn> Signed-off-by: Juxin Gao <gaojuxin@loongson.cn> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
Yinbo Zhu authored
Add the Loongson platform gpio binding with DT schema format using json-schema. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-
- 05 Mar, 2023 3 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
-