- 08 Aug, 2023 6 commits
-
-
Jian Shen authored
Restore the mac pause state to user configuration when autoneg is disabled Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230807113452.474224-2-shaojijie@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Rheinsberg authored
Change the new (unreleased) SO_PEERPIDFD sockopt to return ENODATA rather than ESRCH if a socket type does not support remote peer-PID queries. Currently, SO_PEERPIDFD returns ESRCH when the socket in question is not an AF_UNIX socket. This is quite unexpected, given that one would assume ESRCH means the peer process already exited and thus cannot be found. However, in that case the sockopt actually returns EINVAL (via pidfd_prepare()). This is rather inconsistent with other syscalls, which usually return ESRCH if a given PID refers to a non-existant process. This changes SO_PEERPIDFD to return ENODATA instead. This is also what SO_PEERGROUPS returns, and thus keeps a consistent behavior across sockopts. Note that this code is returned in 2 cases: First, if the socket type is not AF_UNIX, and secondly if the socket was not yet connected. In both cases ENODATA seems suitable. Signed-off-by:
David Rheinsberg <david@readahead.eu> Reviewed-by:
Christian Brauner <brauner@kernel.org> Acked-by:
Luca Boccassi <bluca@debian.org> Fixes: 7b26952a ("net: core: add getsockopt SO_PEERPIDFD") Link: https://lore.kernel.org/r/20230807081225.816199-1-david@readahead.euSigned-off-by:
-
Claudiu Beznea authored
Update MAINTAINERS entries with a valid email address as the Microchip one is no longer valid. Acked-by:
Conor Dooley <conor.dooley@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Claudiu Beznea <claudiu.beznea@tuxon.dev> Acked-by:
Sebastian Reichel <sre@kernel.org> Link: https://lore.kernel.org/r/20230804050007.235799-1-claudiu.beznea@tuxon.devSigned-off-by:
-
Jonas Gorski authored
Fix handling IPv4 routes referencing a nexthop via its id by replacing calls to fib_info_nh() with fib_info_nhc(). Trying to add an IPv4 route referencing a nextop via nhid: $ ip link set up swp5 $ ip a a 10.0.0.1/24 dev swp5 $ ip nexthop add dev swp5 id 20 via 10.0.0.2 $ ip route add 10.0.1.0/24 nhid 20 triggers warnings when trying to handle the route: [ 528.805763] ------------[ cut here ]------------ [ 528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G O 6.4.5 #1 [ 528.845178] Hardware name: delta,tn48m-dn (DT) [ 528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera] [ 528.876007] sp : ffff80000b20bc90 [ 528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48 [ 528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200 [ 528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059 [ 528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020 [ 528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86 [ 528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc [ 528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80 [ 528.951058] Call trace: [ 528.953516] __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.958952] __prestera_router_fib_event_work+0x100/0x158 [prestera] [ 528.965348] process_one_work+0x208/0x488 [ 528.969387] worker_thread+0x4c/0x430 [ 528.973068] kthread+0x120/0x138 [ 528.976313] ret_from_fork+0x10/0x20 [ 528.979909] ---[ end trace 0000000000000000 ]--- [ 528.984998] ------------[ cut here ]------------ [ 528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G W O 6.4.5 #1 [ 529.024368] Hardware name: delta,tn48m-dn (DT) [ 529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera] [ 529.055452] sp : ffff80000b20bc60 [ 529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48 [ 529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0 [ 529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059 [ 529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80 [ 529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018 [ 529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557 [ 529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80 [ 529.130501] Call trace: [ 529.132958] __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 529.138394] prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera] [ 529.143918] __prestera_router_fib_event_work+0x100/0x158 [prestera] [ 529.150313] process_one_work+0x208/0x488 [ 529.154348] worker_thread+0x4c/0x430 [ 529.158030] kthread+0x120/0x138 [ 529.161274] ret_from_fork+0x10/0x20 [ 529.164867] ---[ end trace 0000000000000000 ]--- and results in a non offloaded route: $ ip route 10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap 10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap When creating a route referencing a nexthop via its ID, the nexthop will be stored in a separate nh pointer instead of the array of nexthops in the fib_info struct. This causes issues since fib_info_nh() only handles the nexthops array, but not the separate nh pointer, and will loudly WARN about it. In contrast fib_info_nhc() handles both, but returns a fib_nh_common pointer instead of a fib_nh pointer. Luckily we only ever access fields from the fib_nh_common parts, so we can just replace all instances of fib_info_nh() with fib_info_nhc() and access the fields via their fib_nh_common names. This allows handling IPv4 routes with an external nexthop, and they now get offloaded as expected: $ ip route 10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap 10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload Fixes: 396b80cb ("net: marvell: prestera: Add neighbour cache accounting") Signed-off-by:Jonas Gorski <jonas.gorski@bisdn.de> Acked-by:
Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20230804101220.247515-1-jonas.gorski@bisdn.deSigned-off-by:
-
Andrew Kanner authored
Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2b ("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the xdp_init_buff() which all XDP driver use - it's safe to remove this check. The original intend was to catch cases where XDP drivers have not been updated to use xdp.frame_sz, but that is not longer a concern (since xdp_init_buff). Running the initial syzkaller repro it was discovered that the contiguous physical memory allocation is used for both xdp paths in tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can work on higher order pages, as long as this is contiguous physical memory (e.g. a page). Reported-and-tested-by: syzbot+f817490f5bd20541b90a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000774b9205f1d8a80d@google.com/T/ Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a Link: https://lore.kernel.org/all/20230725155403.796-1-andrew.kanner@gmail.com/T/ Fixes: 43b5169d ("net, xdp: Introduce xdp_init_buff utility routine") Signed-off-by:
Andrew Kanner <andrew.kanner@gmail.com> Acked-by:
Jesper Dangaard Brouer <hawk@kernel.org> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230803190316.2380231-1-andrew.kanner@gmail.comSigned-off-by:
-
Andrew Kanner authored
Using the syzkaller repro with reduced packet size it was discovered that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(), although pad may be incremented in tun_build_skb(). This may end up with exceeding the PAGE_SIZE limit in tun_build_skb(). Jason Wang <jasowang@redhat.com> proposed to count XDP_PACKET_HEADROOM always (e.g. without rcu_access_pointer(tun->xdp_prog)) in tun_can_build_skb() since there's a window during which XDP program might be attached between tun_can_build_skb() and tun_build_skb(). Fixes: 7df13219 ("tun: reserve extra headroom only when XDP is set") Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90aSigned-off-by:
-
- 07 Aug, 2023 3 commits
-
-
Jakub Kicinski authored
Jason A. Donenfeld says: ==================== wireguard fixes for 6.5-rc6 Just one patch this time, somewhat late in the cycle: 1) Fix an off-by-one calculation for the maximum node depth size in the allowedips trie data structure, and also adjust the self-tests to hit this case so it doesn't regress again in the future. ==================== Link: https://lore.kernel.org/r/20230807132146.2191597-1-Jason@zx2c4.comSigned-off-by:
-
Jason A. Donenfeld authored
In the allowedips self-test, nodes are inserted into the tree, but it generated an even amount of nodes, but for checking maximum node depth, there is of course the root node, which makes the total number necessarily odd. With two few nodes added, it never triggered the maximum depth check like it should have. So, add 129 nodes instead of 128 nodes, and do so with a more straightforward scheme, starting with all the bits set, and shifting over one each time. Then increase the maximum depth to 129, and choose a better name for that variable to make it clear that it represents depth as opposed to bits. Cc: stable@vger.kernel.org Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.comSigned-off-by:
-
Ziyang Xuan authored
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with following testcase: # ip netns add ns1 # ip netns exec ns1 ip link add bond0 type bond mode 0 # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 # ip netns exec ns1 ip link set bond_slave_1 master bond0 # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link set bond_slave_1 nomaster # ip netns del ns1 The logical analysis of the problem is as follows: 1. create ETH_P_8021AD protocol vlan10 for bond_slave_1: register_vlan_dev() vlan_vid_add() vlan_info_alloc() __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1 2. create ETH_P_8021AD protocol bond0_vlan10 for bond0: register_vlan_dev() vlan_vid_add() __vlan_vid_add() vlan_add_rx_filter_info() if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER return 0; if (netif_device_present(dev)) return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid. 3. detach bond_slave_1 from bond0: __bond_release_one() vlan_vids_del_by_dev() list_for_each_entry(vid_info, &vlan_info->vid_list, list) vlan_vid_del(dev, vid_info->proto, vid_info->vid); // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted. // bond_slave_1->vlan_info will be assigned NULL. 4. delete vlan10 during delete ns1: default_device_exit_batch() dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10 vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1 BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!! Add S-VLAN tag related features support to bond driver. So the bond driver will always propagate the VLAN info to its slaves. Fixes: 8ad227ff ("net: vlan: add 802.1ad support") Suggested-by:Ido Schimmel <idosch@idosch.org> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.comSigned-off-by:
-
- 06 Aug, 2023 4 commits
-
-
Nitya Sunkad authored
ionic_start_queues_reconfig returns an error code if txrx_init fails. Handle this error code in the relevant places. This fixes a corner case where the device could get left in a detached state if the CMB reconfig fails and the attempt to clean up the mess also fails. Note that calling netif_device_attach when the netdev is already attached does not lead to unexpected behavior. Change goto name "errout" to "err_out" to maintain consistency across goto statements. Fixes: 40bc471d ("ionic: add tx/rx-push support with device Component Memory Buffers") Fixes: 6f7d6f0f ("ionic: pull reset_queues into tx_timeout handler") Signed-off-by:
Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fedor Pchelkin authored
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the allocated percpu vni stats are not freed on the error path. Introduce vxlan_vni_free() which would work as a nice wrapper to free vxlan_vni_node resources properly. Found by Linux Verification Center (linuxtesting.org). Fixes: 4095e0e1 ("drivers: vxlan: vnifilter: per vni stats") Suggested-by:
Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by:
-
Eric Dumazet authored
syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Jakub Kicinski authored
TLS records end with a 16B tag. For TLS device offload we only need to make space for this tag in the stream, the device will generate and replace it with the actual calculated tag. Long time ago the code would just re-reference the head frag which mostly worked but was suboptimal because it prevented TCP from combining the record into a single skb frag. I'm not sure if it was correct as the first frag may be shorter than the tag. The commit under fixes tried to replace that with using the page frag and if the allocation failed rolling back the data, if record was long enough. It achieves better fragment coalescing but is also buggy. We don't roll back the iterator, so unless we're at the end of send we'll skip the data we designated as tag and start the next record as if the rollback never happened. There's also the possibility that the record was constructed with MSG_MORE and the data came from a different syscall and we already told the user space that we "got it". Allocate a single dummy page and use it as fallback. Found by code inspection, and proven by forcing allocation failures. Fixes: e7b159a4 ("net/tls: remove the record tail optimization") Signed-off-by:
-
- 05 Aug, 2023 10 commits
-
-
Eric Dumazet authored
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket. Same thing in do_dccp_getsockopt(). Add READ_ONCE()/WRITE_ONCE() annotations, and change dccp_sendmsg() to check again dccps_mss_cache after socket is locked. Fixes: 7c657876 ("[DCCP]: Initial implementation") Reported-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: more fixes for v6.5 Here is a new batch of fixes related to MPTCP for v6.5 and older. Patches 1 and 2 fix issues with MPTCP Join selftest when manually launched with '-i' parameter to use 'ip mptcp' tool instead of the dedicated one (pm_nl_ctl). The issues have been there since v5.18. Thank you Andrea for your first contributions to MPTCP code in the upstream kernel! Patch 3 avoids corrupting the data stream when trying to reset connections that have fallen back to TCP. This can happen from v6.1. Patch 4 fixes a race when doing a disconnect() and an accept() in parallel on a listener socket. The issue only happens in rare cases if the user is really unlucky since a fix that landed in v6.3 but backported up to v6.1. ==================== Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-0-6671b1ab11cc@tessares.netSigned-off-by:
-
Paolo Abeni authored
Despite commit 0ad529d9 ("mptcp: fix possible divide by zero in recvmsg()"), the mptcp protocol is still prone to a race between disconnect() (or shutdown) and accept. The root cause is that the mentioned commit checks the msk-level flag, but mptcp_stream_accept() does acquire the msk-level lock, as it can rely directly on the first subflow lock. As reported by Christoph than can lead to a race where an msk socket is accepted after that mptcp_subflow_queue_clean() releases the listener socket lock and just before it takes destructive actions leading to the following splat: BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330 Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89 RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300 RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020 R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880 FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_accept+0x1ae/0x260 net/socket.c:1872 __sys_accept4+0x9b/0x110 net/socket.c:1913 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x20/0x30 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Address the issue by temporary removing the pending request socket from the accept queue, so that racing accept() can't touch them. After depleting the msk - the ssk still exists, as plain TCP sockets, re-insert them into the accept queue, so that later inet_csk_listen_stop() will complete the tcp socket disposal. Fixes: 2a6a870e ("mptcp: stops worker on unaccepted sockets at listener close") Cc: stable@vger.kernel.org Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
Since the blamed commit, the MPTCP protocol unconditionally sends TCP resets on all the subflows on disconnect(). That fits full-blown MPTCP sockets - to implement the fastclose mechanism - but causes unexpected corruption of the data stream, caught as sporadic self-tests failures. Fixes: d21f8348 ("mptcp: use fastclose on more edge scenarios") Cc: stable@vger.kernel.org Tested-by:
-
Andrea Claudi authored
mptcp_join 'implicit EP' test currently fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' Error: too many addresses or duplicate one: -22. ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal ' This happens because of two reasons: - iproute v6.3.0 does not support the implicit flag, fixed with iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit flag") - pm_nl_check_endpoint wrongly expects the ip address to be repeated two times in iproute output, and does not account for a final whitespace in it. This fixes the issue trimming the whitespace in the output string and removing the double address in the expected string. Fixes: 69c6ce7b ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by:Andrea Claudi <aclaudi@redhat.com> Reviewed-by:
-
Andrea Claudi authored
mptcp_join 'delete and re-add' test fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 002 delete and re-add before delete[ ok ] mptcp_info subflows=1 [ ok ] Error: argument "ADDRESS" is wrong: invalid for non-zero id address after delete[fail] got 2:2 subflows expected 1 This happens because endpoint delete includes an ip address while id is not 0, contrary to what is indicated in the ip mptcp man page: "When used with the delete id operation, an IFADDR is only included when the ID is 0." This fixes the issue using the $addr variable in pm_nl_del_endpoint() only when id is 0. Fixes: 34aa6e3b ("selftests: mptcp: add ip mptcp wrappers") Cc: stable@vger.kernel.org Signed-off-by: -
Jakub Kicinski authored
Florian Westphal says: ==================== tunnels: fix ipv4 pmtu icmp checksum The checksum of the generated ipv4 icmp pmtud message is only correct if the skb that causes the icmp error generation is linear. Fix this and add a selftest for this. ==================== Link: https://lore.kernel.org/r/20230803152653.29535-1-fw@strlen.deSigned-off-by:
-
Florian Westphal authored
TCP might get stuck if a nonlinear skb exceeds the path MTU, icmp error contains an incorrect icmp checksum in that case. Extend the existing test for vxlan to also send at least 1MB worth of data via TCP in addition to the existing 'large icmp packet adds route exception'. On my test VM this fails due to 0-size output file without "tunnels: fix kasan splat when generating ipv4 pmtu error". Signed-off-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.deSigned-off-by:
-
Florian Westphal authored
If we try to emit an icmp error in response to a nonliner skb, we get BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220 Read of size 4 at addr ffff88811c50db00 by task iperf3/1691 CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309 [..] kasan_report+0x105/0x140 ip_compute_csum+0x134/0x220 iptunnel_pmtud_build_icmp+0x554/0x1020 skb_tunnel_check_pmtu+0x513/0xb80 vxlan_xmit_one+0x139e/0x2ef0 vxlan_xmit+0x1867/0x2760 dev_hard_start_xmit+0x1ee/0x4f0 br_dev_queue_push_xmit+0x4d1/0x660 [..] ip_compute_csum() cannot deal with nonlinear skbs, so avoid it. After this change, splat is gone and iperf3 is no longer stuck. Fixes: 4cb47a86 ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by:
-
Eric Dumazet authored
Another syzbot report [1] is about tp->status lockless reads from __packet_get_status() [1] BUG: KCSAN: data-race in __packet_rcv_has_room / __packet_set_status write to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 0: __packet_set_status+0x78/0xa0 net/packet/af_packet.c:407 tpacket_rcv+0x18bb/0x1a60 net/packet/af_packet.c:2483 deliver_skb net/core/dev.c:2173 [inline] __netif_receive_skb_core+0x408/0x1e80 net/core/dev.c:5337 __netif_receive_skb_one_core net/core/dev.c:5491 [inline] __netif_receive_skb+0x57/0x1b0 net/core/dev.c:5607 process_backlog+0x21f/0x380 net/core/dev.c:5935 __napi_poll+0x60/0x3b0 net/core/dev.c:6498 napi_poll net/core/dev.c:6565 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6698 __do_softirq+0xc1/0x265 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x57/0xa0 kernel/softirq.c:650 sysvec_apic_timer_interrupt+0x6d/0x80 arch/x86/kernel/apic/apic.c:1106 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:645 smpboot_thread_fn+0x33c/0x4a0 kernel/smpboot.c:112 kthread+0x1d7/0x210 kernel/kthread.c:379 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 read to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 1: __packet_get_status net/packet/af_packet.c:436 [inline] packet_lookup_frame net/packet/af_packet.c:524 [inline] __tpacket_has_room net/packet/af_packet.c:1255 [inline] __packet_rcv_has_room+0x3f9/0x450 net/packet/af_packet.c:1298 tpacket_rcv+0x275/0x1a60 net/packet/af_packet.c:2285 deliver_skb net/core/dev.c:2173 [inline] dev_queue_xmit_nit+0x38a/0x5e0 net/core/dev.c:2243 xmit_one net/core/dev.c:3574 [inline] dev_hard_start_xmit+0xcf/0x3f0 net/core/dev.c:3594 __dev_queue_xmit+0xefb/0x1d10 net/core/dev.c:4244 dev_queue_xmit include/linux/netdevice.h:3088 [inline] can_send+0x4eb/0x5d0 net/can/af_can.c:276 bcm_can_tx+0x314/0x410 net/can/bcm.c:302 bcm_tx_timeout_handler+0xdb/0x260 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x217/0x700 kernel/time/hrtimer.c:1749 hrtimer_run_softirq+0xd6/0x120 kernel/time/hrtimer.c:1766 __do_softirq+0xc1/0x265 kernel/softirq.c:571 run_ksoftirqd+0x17/0x20 kernel/softirq.c:939 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:379 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 value changed: 0x0000000000000000 -> 0x0000000020000081 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 6.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Fixes: 69e3c75f ("net: TX_RING and packet mmap") Reported-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230803145600.2937518-1-edumazet@google.comSigned-off-by:
-
- 04 Aug, 2023 6 commits
-
-
Vladimir Oltean authored
When the tagging protocol in current use is "ocelot-8021q" and we unbind the driver, we see this splat: $ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind mscc_felix 0000:00:00.5 swp0: left promiscuous mode sja1105 spi2.0: Link is Down DSA: tree 1 torn down mscc_felix 0000:00:00.5 swp2: left promiscuous mode sja1105 spi2.2: Link is Down DSA: tree 3 torn down fsl_enetc 0000:00:00.2 eno2: left promiscuous mode mscc_felix 0000:00:00.5: Link is Down ------------[ cut here ]------------ RTNL: assertion failed at net/dsa/tag_8021q.c (409) WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0 Modules linked in: CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771 pc : dsa_tag_8021q_unregister+0x12c/0x1a0 lr : dsa_tag_8021q_unregister+0x12c/0x1a0 Call trace: dsa_tag_8021q_unregister+0x12c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ RTNL: assertion failed at net/8021q/vlan_core.c (376) WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0 CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771 pc : vlan_vid_del+0x1b8/0x1f0 lr : vlan_vid_del+0x1b8/0x1f0 dsa_tag_8021q_unregister+0x8c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 DSA: tree 0 torn down This was somewhat not so easy to spot, because "ocelot-8021q" is not the default tagging protocol, and thus, not everyone who tests the unbinding path may have switched to it beforehand. The default felix_tag_npi_teardown() does not require rtnl_lock() to be held. Fixes: 7c83a7c5 ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.comSigned-off-by:
-
Xiang Yang authored
Coccicheck reports the error below: net/mptcp/protocol.c:3330:15-28: ERROR: test of a variable/field address Since the address of msk->cb_flags is used in __test_and_clear_bit, the address should not be NULL. The judgment for if (unlikely(msk->cb_flags)) will always be true, we should check the real value of msk->cb_flags here. Fixes: 65a569b0 ("mptcp: optimize release_cb for the common case") Signed-off-by:
Xiang Yang <xiangyang3@huawei.com> Reviewed-by:
-
David S. Miller authored
Li Yang says: ==================== fix at803x wol setting v3: Break long lines Add back error checking of phy_read v4: Disable WoL in 1588 register for AR8031 in probe ==================== Signed-off-by: -
Li Yang authored
Since the AR8032 part does not support wol, remove related callbacks from it. Fixes: 5800091a ("net: phy: at803x: add support for AR8032 PHY") Signed-off-by:
Li Yang <leoyang.li@nxp.com> Cc: David Bauer <mail@david-bauer.net> Signed-off-by:
-
Li Yang authored
In commit 7beecaf7 ("net: phy: at803x: improve the WOL feature"), it seems not correct to use a wol_en bit in a 1588 Control Register which is only available on AR8031/AR8033(share the same phy_id) to determine if WoL is enabled. Change it back to use AT803X_INTR_ENABLE_WOL for determining the WoL status which is applicable on all chips supporting wol. Also update the at803x_set_wol() function to only update the 1588 register on chips having it. After this change, disabling wol at probe from commit d7cd5e06 ("net: phy: at803x: disable WOL at probe") is no longer needed. Change it to just disable the WoL bit in 1588 register for AR8031/AR8033 to be aligned with AT803X_INTR_ENABLE_WOL in probe. Fixes: 7beecaf7 ("net: phy: at803x: improve the WOL feature") Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Reviewed-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Nathan Chancellor authored
When booting a kernel with CONFIG_MISDN_DSP=y and CONFIG_CFI_CLANG=y, there is a failure when dsp_cmx_send() is called indirectly from call_timer_fn(): [ 0.371412] CFI failure at call_timer_fn+0x2f/0x150 (target: dsp_cmx_send+0x0/0x530; expected type: 0x92ada1e9) The function pointer prototype that call_timer_fn() expects is void (*fn)(struct timer_list *) whereas dsp_cmx_send() has a parameter type of 'void *', which causes the control flow integrity checks to fail because the parameter types do not match. Change dsp_cmx_send()'s parameter type to be 'struct timer_list' to match the expected prototype. The argument is unused anyways, so this has no functional change, aside from avoiding the CFI failure. Reported-by:
kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202308020936.58787e6c-oliver.sang@intel.comSigned-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Sami Tolvanen <samitolvanen@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Fixes: e313ac12 ("mISDN: Convert timers to use timer_setup()") Link: https://lore.kernel.org/r/20230802-fix-dsp_cmx_send-cfi-failure-v1-1-2f2e79b0178d@kernel.orgSigned-off-by:
-
- 03 Aug, 2023 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and wireless. Nothing scary here. Feels like the first wave of regressions from v6.5 is addressed - one outstanding fix still to come in TLS for the sendpage rework. Current release - regressions: - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES - dsa: fix older DSA drivers using phylink Previous releases - regressions: - gro: fix misuse of CB in udp socket lookup - mlx5: unregister devlink params in case interface is down - Revert "wifi: ath11k: Enable threaded NAPI" Previous releases - always broken: - sched: cls_u32: fix match key mis-addressing - sched: bind logic fixes for cls_fw, cls_u32 and cls_route - add bound checks to a number of places which hand-parse netlink - bpf: disable preemption in perf_event_output helpers code - qed: fix scheduling in a tasklet while getting stats - avoid using APIs which are not hardirq-safe in couple of drivers, when we may be in a hard IRQ (netconsole) - wifi: cfg80211: fix return value in scan logic, avoid page allocator warning - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D (DBDC) Misc: - drop handful of inactive maintainers, put some new in place" * tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits) MAINTAINERS: update TUN/TAP maintainers test/vsock: remove vsock_perf executable on `make clean` tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen tcp_metrics: annotate data-races around tm->tcpm_net tcp_metrics: annotate data-races around tm->tcpm_vals[] tcp_metrics: annotate data-races around tm->tcpm_lock tcp_metrics: annotate data-races around tm->tcpm_stamp tcp_metrics: fix addr_same() helper prestera: fix fallback to previous version on same major version udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES net/mlx5e: Set proper IPsec source port in L4 selector net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio net/mlx5: fs_core: Make find_closest_ft more generic wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() vxlan: Fix nexthop hash size ip6mr: Fix skb_under_panic in ip6mr_cache_report() s390/qeth: Don't call dev_close/dev_open (DOWN/UP) net: tap_open(): set sk_uid from current_fsuid() net: tun_chr_open(): set sk_uid from current_fsuid() net: dcb: choose correct policy to parse DCB_ATTR_BCN ... -
Jakub Kicinski authored
Willem and Jason have agreed to take over the maintainer duties for TUN/TAP, thank you! There's an existing entry for TUN/TAP which only covers the user mode Linux implementation. Since we haven't heard from Maxim on the list for almost a decade, extend that entry and take it over, rather than adding a new one. Acked-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Martin KaFai Lau says: ==================== pull-request: bpf 2023-08-03 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 3 files changed, 37 insertions(+), 20 deletions(-). The main changes are: 1) Disable preemption in perf_event_output helpers code, from Jiri Olsa 2) Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing, from Lin Ma 3) Multiple warning splat fixes in cpumap from Hou Tao * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, cpumap: Handle skb as well when clean up ptr_ring bpf, cpumap: Make sure kthread is running before map update returns bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing bpf: Disable preemption in bpf_event_output bpf: Disable preemption in bpf_perf_event_output ==================== Link: https://lore.kernel.org/r/20230803181429.994607-1-martin.lau@linux.devSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.5 We did some house cleaning in MAINTAINERS file so several patches about that. Few regressions fixed and also fix some recently enabled memcpy() warnings. Only small commits and nothing special standing out. * tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() wifi: ray_cs: Replace 1-element array with flexible array MAINTAINERS: add Jeff as ath10k, ath11k and ath12k maintainer MAINTAINERS: wifi: mark mlw8k as orphan MAINTAINERS: wifi: mark b43 as orphan MAINTAINERS: wifi: mark zd1211rw as orphan MAINTAINERS: wifi: mark wl3501 as orphan MAINTAINERS: wifi: mark rndis_wlan as orphan MAINTAINERS: wifi: mark ar5523 as orphan MAINTAINERS: wifi: mark cw1200 as orphan MAINTAINERS: wifi: atmel: mark as orphan MAINTAINERS: wifi: rtw88: change Ping as the maintainer Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12" wifi: cfg80211: Fix return value in scan logic Revert "wifi: ath11k: Enable threaded NAPI" MAINTAINERS: Update mwifiex maintainer list wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC) ==================== Link: https://lore.kernel.org/r/20230803140058.57476C433C9@smtp.kernel.orgSigned-off-by:
-
Stefano Garzarella authored
We forgot to add vsock_perf to the rm command in the `clean` target, so now we have a left over after `make clean` in tools/testing/vsock. Fixes: 8abbffd2 ("test/vsock: vsock_perf utility") Cc: AVKrasnov@sberdevices.ru Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== tcp_metrics: series of fixes This series contains a fix for addr_same() and various data-race annotations. We still have to address races over tm->tcpm_saddr and tm->tcpm_daddr later. ==================== Link: https://lore.kernel.org/r/20230802131500.1478140-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst() would overwrite data that could be read from tcp_fastopen_cache_get() or tcp_metrics_fill_info(). We need to acquire fastopen_seqlock to maintain consistency. For newly allocated objects, tcpm_new() can switch to kzalloc() to avoid an extra fastopen_seqlock acquisition. Fixes: 1fe4c481 ("net-tcp: Fast Open client - cookie cache") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
tm->tcpm_net can be read or written locklessly. Instead of changing write_pnet() and read_pnet() and potentially hurt performance, add the needed READ_ONCE()/WRITE_ONCE() in tm_net() and tcpm_new(). Fixes: 849e8a0c ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup") Signed-off-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
-
Eric Dumazet authored
tm->tcpm_vals[] values can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this, and force use of tcp_metric_get() and tcp_metric_set() Fixes: 51c5d0c4 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by:
-
Eric Dumazet authored
tm->tcpm_lock can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this. Fixes: 51c5d0c4 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by:
-
Eric Dumazet authored
tm->tcpm_stamp can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this. Also constify tcpm_check_stamp() dst argument. Fixes: 51c5d0c4 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by:
-
