Skip to content

L
linux
Switch branch/tag
  1. 15 Jan, 2015 2 commits
  3. 12 Jan, 2015 31 commits
  5. 05 Jan, 2015 7 commits
    • Josef Bacik's avatar
      Btrfs: do not move em to modified list when unpinning · 736ba53d
      Josef Bacik authored 
      commit a2804695 upstream.

We use the modified list to keep track of which extents have been modified so we
know which ones are candidates for logging at fsync() time.  Newly modified
extents are added to the list at modification time, around the same time the
ordered extent is created.  We do this so that we don't have to wait for ordered
extents to complete before we know what we need to log.  The problem is when
something like this happens

log extent 0-4k on inode 1
copy csum for 0-4k from ordered extent into log
sync log
commit transaction
log some other extent on inode 1
ordered extent for 0-4k completes and adds itself onto modified list again
log changed extents
see ordered extent for 0-4k has already been logged
	at this point we assume the csum has been copied
sync log
crash

On replay we will see the extent 0-4k in the log, drop the original 0-4k extent
which is the same one that we are replaying which also drops the csum, and then
we won't find the csum in the log for that bytenr.  This of course causes us to
have errors about not having csums for certain ranges of our inode.  So remove
the modified list manipulation in unpin_extent_cache, any modified extents
should have been added well before now, and we don't want them re-logged.  This
fixes my test that I could reliably reproduce this problem with.  Thanks,
Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
Signed-off-by: default avatarChris Mason <clm@fb.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      736ba53d
    • Josef Bacik's avatar
      Btrfs: make sure logged extents complete in the current transaction V3 · d02ab1a9
      Josef Bacik authored 
      commit 50d9aa99 upstream.

Liu Bo pointed out that my previous fix would lose the generation update in the
scenario I described.  It is actually much worse than that, we could lose the
entire extent if we lose power right after the transaction commits.  Consider
the following

write extent 0-4k
log extent in log tree
commit transaction
	< power fail happens here
ordered extent completes

We would lose the 0-4k extent because it hasn't updated the actual fs tree, and
the transaction commit will reset the log so it isn't replayed.  If we lose
power before the transaction commit we are save, otherwise we are not.

Fix this by keeping track of all extents we logged in this transaction.  Then
when we go to commit the transaction make sure we wait for all of those ordered
extents to complete before proceeding.  This will make sure that if we lose
power after the transaction commit we still have our data.  This also fixes the
problem of the improperly updated extent generation.  Thanks,
Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
Signed-off-by: default avatarChris Mason <clm@fb.com>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      d02ab1a9
    • Josef Bacik's avatar
      Btrfs: make sure we wait on logged extents when fsycning two subvols · acce1ec2
      Josef Bacik authored 
      commit 9dba8cf1 upstream.

If we have two fsync()'s race on different subvols one will do all of its work
to get into the log_tree, wait on it's outstanding IO, and then allow the
log_tree to finish it's commit.  The problem is we were just free'ing that
subvols logged extents instead of waiting on them, so whoever lost the race
wouldn't really have their data on disk.  Fix this by waiting properly instead
of freeing the logged extents.  Thanks,
Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
Signed-off-by: default avatarChris Mason <clm@fb.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      acce1ec2
    • Ronald Wahl's avatar
      usb: gadget: at91_udc: move prepare clk into process context · 97863cb8
      Ronald Wahl authored 
      commit b2ba27a5 upstream.

Commit 76280832 (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt
context. This is not allowed as it might sleep. Also setting the clock
rate is unsafe to call from there for the same reason. Move clock
preparation and setting clock rate into process context (at91udc_probe).
Signed-off-by: default avatarRonald Wahl <ronald.wahl@raritan.com>
Acked-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      97863cb8
    • Alex Deucher's avatar
      drm/radeon: work around a hw bug in MGCG on CIK · 1e6ce3b8
      Alex Deucher authored 
      commit 4bb62c95 upstream.

Always need to set bit 0 of RLC_CGTT_MGCG_OVERRIDE
to avoid unreliable doorbell updates in some cases.
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      1e6ce3b8
    • Lars-Peter Clausen's avatar
      ASoC: sigmadsp: Refuse to load firmware files with a non-supported version · 17a29b83
      Lars-Peter Clausen authored 
      commit 50c0f21b upstream.

Make sure to check the version field of the firmware header to make sure to
not accidentally try to parse a firmware file with a different layout.
Trying to do so can result in loading invalid firmware code to the device.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      17a29b83
    • Tetsuo Handa's avatar
      drm/ttm: Avoid memory allocation from shrinker functions. · bf6132b5
      Tetsuo Handa authored 
      commit 881fdaa5 upstream.

Andrew Morton wrote:
> On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote:
>
> > Andrew Morton wrote:
> > > Poor ttm guys - this is a bit of a trap we set for them.
> >
> > Commit a91576d7 ("drm/ttm: Pass GFP flags in order to avoid deadlock.")
> > changed to use sc->gfp_mask rather than GFP_KERNEL.
> >
> > -       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *),
> > -                       GFP_KERNEL);
> > +       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp);
> >
> > But this bug is caused by sc->gfp_mask containing some flags which are not
> > in GFP_KERNEL, right? Then, I think
> >
> > -       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp);
> > +       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL);
> >
> > would hide this bug.
> >
> > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag)
>
> Well no - ttm_page_pool_free() should stop calling kmalloc altogether.
> Just do
>
> 	struct page *pages_to_free[16];
>
> and rework the code to free 16 pages at a time.  Easy.

Well, ttm code wants to process 512 pages at a time for performance.
Memory footprint increased by 512 * sizeof(struct page *) buffer is
only 4096 bytes. What about using static buffer like below?
----------
>From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu, 13 Nov 2014 22:21:54 +0900
Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions.

Commit a91576d7 ("drm/ttm: Pass GFP flags in order to avoid
deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags
which are not in GFP_KERNEL.

  https://bugzilla.kernel.org/show_bug.cgi?id=87891

Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would
avoid the BUG_ON(), but avoiding memory allocation from shrinker
function is better and reliable fix.

Shrinker function is already serialized by global lock, and
clean up function is called after shrinker function is unregistered.
Thus, we can use static buffer when called from shrinker function
and clean up function.
Signed-off-by: default avatarTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      bf6132b5
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7