- 01 Dec, 2023 15 commits
-
-
Shinas Rasheed authored
Set backpressure watermark for hardware RX queues. Backpressure gets triggered when the available buffers of a hardware RX queue falls below the set watermark. This backpressure will propagate to packet processing pipeline in the OCTEON card, so that the host receives fewer packets and prevents packet dropping at host. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
Set the error code if octep_ctrl_net_get_mtu() fails. Currently the code returns success. Fixes: 0a5f8534 ("octeon_ep: get max rx packet length from firmware") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Sathesh B Edara <sedara@marvell.com> Signed-off-by:
-
Jakub Kicinski authored
Pedro Tammela says: ==================== selftests: tc-testing: more tdc updates Follow-up on a feedback from Jakub and random cleanups from related net/sched patches ==================== Link: https://lore.kernel.org/r/20231129222424.910148-1-pctammela@mojatatu.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Pedro Tammela authored
Remove this generic file and move the tests to their appropriate files Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20231129222424.910148-5-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
All tests in this file pertain to flower, so name it appropriately Signed-off-by:
-
Pedro Tammela authored
Patchwork CI didn't like the extra './', so remove it. Signed-off-by:
-
Pedro Tammela authored
Tests using DEV2 should not be run in a dedicated net namespace, and in parallel, as this device cannot be shared. Signed-off-by:
-
Jakub Kicinski authored
To increase the chances of people finding the rendered docs add a link to specs.rst and index.rst. Add a label in the generated index.rst and while at it adjust the title a little bit. Reviewed-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231129041427.2763074-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Shinas Rasheed says: ==================== support OCTEON CN98 devices Implement device unload control net API required for CN98 devices and add support in driver for the same. V1: https://lore.kernel.org/all/20231127162135.2529363-1-srasheed@marvell.com/ ==================== Link: https://lore.kernel.org/r/20231129045348.2538843-1-srasheed@marvell.comSigned-off-by:
-
Shinas Rasheed authored
Add PCI Endpoint NIC support for Octeon CN98 devices. CN98 devices are part of Octeon 9 family products with similar PCI NIC characteristics to CN93, already supported driver. Add CN98 card to the device id table, as well as support differences in the register fields and certain usage scenarios such as unload. Signed-off-by:
-
Shinas Rasheed authored
Device unload control net function should inform firmware of driver unload to let it take necessary actions to cleanup. Signed-off-by:
-
Andy Shevchenko authored
BYTES_PER_KBIT is defined in units.h, use that definition. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by:
-
Andrew Halaney authored
Currently the phy reset sequence is as shown below for a devicetree described mdio phy on boot: 1. Assert the phy_device's reset as part of registering 2. Deassert the phy_device's reset as part of registering 3. Deassert the phy_device's reset as part of phy_probe 4. Deassert the phy_device's reset as part of phy_hw_init The extra two deasserts include waiting the deassert delay afterwards, which is adding unnecessary delay. This applies to both possible types of resets (reset controller reference and a reset gpio) that can be used. Here's some snipped tracing output using the following command line params "trace_event=gpio:* trace_options=stacktrace" illustrating the reset handling and where its coming from: /* Assert */ systemd-udevd-283 [002] ..... 6.780434: gpio_value: 544 set 0 systemd-udevd-283 [002] ..... 6.783849: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => mdiobus_register_device => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ systemd-udevd-283 [002] ..... 6.802480: gpio_value: 544 set 1 systemd-udevd-283 [002] ..... 6.805886: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ systemd-udevd-283 [002] ..... 6.882601: gpio_value: 544 set 1 systemd-udevd-283 [002] ..... 6.886014: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_probe => really_probe => __driver_probe_device => driver_probe_device => __device_attach_driver => bus_for_each_drv => __device_attach => device_initial_probe => bus_probe_device => device_add => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ NetworkManager-477 [000] ..... 7.023144: gpio_value: 544 set 1 NetworkManager-477 [000] ..... 7.026596: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_init_hw => phy_attach_direct => phylink_fwnode_phy_connect => __stmmac_open => stmmac_open There's a lot of paths where the device is getting its reset asserted and deasserted. Let's track the state and only actually do the assert/deassert when it changes. Reported-by:Sagar Cheluvegowda <quic_scheluve@quicinc.com> Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231127-net-phy-reset-once-v2-1-448e8658779e@redhat.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2023-11-30 We've added 30 non-merge commits during the last 7 day(s) which contain a total of 58 files changed, 1598 insertions(+), 154 deletions(-). The main changes are: 1) Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload, from Stanislav Fomichev with stmmac implementation from Song Yoong Siang. 2) Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques, from Andrii Nakryiko. 3) Add BPF link_info support for uprobe multi link along with bpftool integration for the latter, from Jiri Olsa. 4) Use pkg-config in BPF selftests to determine ld flags which is in particular needed for linking statically, from Akihiko Odaki. 5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits) bpf/tests: Remove duplicate JSGT tests selftests/bpf: Add TX side to xdp_hw_metadata selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP selftests/bpf: Add TX side to xdp_metadata selftests/bpf: Add csum helpers selftests/xsk: Support tx_metadata_len xsk: Add option to calculate TX checksum in SW xsk: Validate xsk_tx_metadata flags xsk: Document tx_metadata_len layout net: stmmac: Add Tx HWTS support to XDP ZC net/mlx5e: Implement AF_XDP TX timestamp and checksum offload tools: ynl: Print xsk-features from the sample xsk: Add TX timestamp and TX checksum offload support xsk: Support tx_metadata_len selftests/bpf: Use pkg-config for libelf selftests/bpf: Override PKG_CONFIG for static builds selftests/bpf: Choose pkg-config for the target bpftool: Add support to display uprobe_multi links selftests/bpf: Add link_info test for uprobe_multi link selftests/bpf: Use bpf_link__destroy in fill_link_info tests ... ==================== Conflicts: Documentation/netlink/specs/netdev.yaml: 839ff60d ("net: page_pool: add nlspec for basic access to page pools") 48eb03dd ("xsk: Add TX timestamp and TX checksum offload support") https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/ While at it also regen, tree is dirty after: 48eb03dd ("xsk: Add TX timestamp and TX checksum offload support") looks like code wasn't re-rendered after "render-max" was removed. Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.netSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by:
-
- 30 Nov, 2023 25 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf and wifi. Current release - regressions: - neighbour: fix __randomize_layout crash in struct neighbour - r8169: fix deadlock on RTL8125 in jumbo mtu mode Previous releases - regressions: - wifi: - mac80211: fix warning at station removal time - cfg80211: fix CQM for non-range use - tools: ynl-gen: fix unexpected response handling - octeontx2-af: fix possible buffer overflow - dpaa2: recycle the RX buffer only after all processing done - rswitch: fix missing dev_kfree_skb_any() in error path Previous releases - always broken: - ipv4: fix uaf issue when receiving igmp query packet - wifi: mac80211: fix debugfs deadlock at device removal time - bpf: - sockmap: af_unix stream sockets need to hold ref for pair sock - netdevsim: don't accept device bound programs - selftests: fix a char signedness issue - dsa: mv88e6xxx: fix marvell 6350 probe crash - octeontx2-pf: restore TC ingress police rules when interface is up - wangxun: fix memory leak on msix entry - ravb: keep reverse order of operations in ravb_remove()" * tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: ravb: Keep reverse order of operations in ravb_remove() net: ravb: Stop DMA in case of failures on ravb_open() net: ravb: Start TX queues after HW initialization succeeded net: ravb: Make write access to CXR35 first before accessing other EMAC registers net: ravb: Use pm_runtime_resume_and_get() net: ravb: Check return value of reset_control_deassert() net: libwx: fix memory leak on msix entry ice: Fix VF Reset paths when interface in a failed over aggregate bpf, sockmap: Add af_unix test with both sockets in map bpf, sockmap: af_unix stream sockets need to hold ref for pair sock tools: ynl-gen: always construct struct ynl_req_state ethtool: don't propagate EOPNOTSUPP from dumps ravb: Fix races between ravb_tx_timeout_work() and net related ops r8169: prevent potential deadlock in rtl8169_close r8169: fix deadlock on RTL8125 in jumbo mtu mode neighbour: Fix __randomize_layout crash in struct neighbour octeontx2-pf: Restore TC ingress police rules when interface is up octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64 net: stmmac: xgmac: Disable FPE MMC interrupts octeontx2-af: Fix possible buffer overflow ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pmLinus Torvalds authored
Pull pmdomain fix from Ulf Hansson: - Avoid polling for the scmi_perf_domain on arm * tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: arm: Avoid polling for scmi_perf_domain
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix CQE error recovery path MMC host: - cqhci: Fix CQE error recovery path - sdhci-pci-gli: Fix initialization of LPM - sdhci-sprd: Fix enabling/disabling of the vqmmc regulator" * tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled mmc: sdhci-pci-gli: Disable LPM during initialization mmc: cqhci: Fix task clearing in CQE error recovery mmc: cqhci: Warn of halt or task clear failure mmc: block: Retry commands in CQE error recovery mmc: block: Be sure to wait while busy in CQE error recovery mmc: cqhci: Increase recovery halt timeout mmc: block: Do not lose cache flush during CQE error recovery
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/ledsLinus Torvalds authored
Pull LED fix from Lee Jones: - Remove duplicate sysfs entry 'color' from LEDs class * tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: leds: class: Don't expose color sysfs entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fix from Ard Biesheuvel: - Fix for EFI unaccepted memory handling * tag 'efi-urgent-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/unaccepted: Fix off-by-one when checking for overlapping ranges
-
Eric Dumazet authored
syzbot was able to trigger a crash [1] in page_pool_unlist() page_pool_list() only inserts a page pool into a netdev page pool list if a netdev was set in params. Even if the kzalloc() call in page_pool_create happens to initialize pool->user.list, I chose to be more explicit in page_pool_list() adding one INIT_HLIST_NODE(). We could test in page_pool_unlist() if netdev was set, but since netdev can be changed to lo, it seems more robust to check if pool->user.list is hashed before calling hlist_del(). [1] Illegal XDP return value 4294946546 on prog (id 2) dev N/A, expect packet loss! general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 5064 Comm: syz-executor391 Not tainted 6.7.0-rc2-syzkaller-00533-ga3799729 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:__hlist_del include/linux/list.h:988 [inline] RIP: 0010:hlist_del include/linux/list.h:1002 [inline] RIP: 0010:page_pool_unlist+0xd1/0x170 net/core/page_pool_user.c:342 Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 90 00 00 00 4c 8b a3 f0 06 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 75 68 48 85 ed 49 89 2c 24 74 24 e8 1b ca 07 f9 48 8d RSP: 0018:ffffc900039ff768 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88814ae02000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88814ae026f0 RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1d57fdc R10: ffffffff8eabfee3 R11: ffffffff8aa0008b R12: 0000000000000000 R13: ffff88814ae02000 R14: dffffc0000000000 R15: 0000000000000001 FS: 000055555717a380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000002555398 CR3: 0000000025044000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __page_pool_destroy net/core/page_pool.c:851 [inline] page_pool_release+0x507/0x6b0 net/core/page_pool.c:891 page_pool_destroy+0x1ac/0x4c0 net/core/page_pool.c:956 xdp_test_run_teardown net/bpf/test_run.c:216 [inline] bpf_test_run_xdp_live+0x1578/0x1af0 net/bpf/test_run.c:388 bpf_prog_test_run_xdp+0x827/0x1530 net/bpf/test_run.c:1254 bpf_prog_test_run kernel/bpf/syscall.c:4041 [inline] __sys_bpf+0x11bf/0x4920 kernel/bpf/syscall.c:5402 __do_sys_bpf kernel/bpf/syscall.c:5488 [inline] __se_sys_bpf kernel/bpf/syscall.c:5486 [inline] __x64_sys_bpf+0x78/0xc0 kernel/bpf/syscall.c:5486 Fixes: 083772c9 ("net: page_pool: record pools per netdev") Reported-and-tested-by: syzbot+f9f8efb58a4db2ca98d0@syzkaller.appspotmail.com Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
-
Paolo Abeni authored
Uwe Kleine-König says: ==================== net: ethernet: Convert to platform remove callback returning void in (implicit) v1 of this series (https://lore.kernel.org/netdev/20231117091655.872426-1-u.kleine-koenig@pengutronix.de) I tried to address the resource leaks in the three cpsw drivers. However this is hard to get right without being able to test the changes. So here comes a series that just converts all drivers below drivers/net/ethernet to use .remove_new() and adds a comment about the potential leaks for someone else to fix the problem. See commit 5c5a7680 ("platform: Provide a remove callback that returns no value") for an extended explanation and the eventual goal. The TL;DR; is to prevent bugs like the three noticed here. Note this series results in no change of behaviour apart from improving the error message for the three cpsw drivers from remove callback returned a non-zero value. This will be ignored. to Failed to resume device (-ESOMETHING) ==================== Link: https://lore.kernel.org/r/20231128173823.867512-1-u.kleine-koenig@pengutronix.deSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Replace the error path returning a non-zero value by an error message and a comment that there is more to do. With that this patch results in no change of behaviour in this driver apart from improving the error message. Signed-off-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Replace the error path returning a non-zero value by an error message and a comment that there is more to do. With that this patch results in no change of behaviour in this driver apart from improving the error message. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Replace the error path returning a non-zero value by an error message and a comment that there is more to do. With that this patch results in no change of behaviour in this driver apart from improving the error message. Signed-off-by:
-
Paolo Abeni authored
Jiri Pirko says: ==================== devlink: warn about existing entities during reload-reinit Recently there has been a couple of attempts from drivers to block devlink reload in certain situations. Turned out, the drivers do not properly tear down ports and related netdevs during reload. To address this, add couple of checks to be done during devlink reload reinit action. Also, extend documentation to be more explicit. ==================== Link: https://lore.kernel.org/r/20231128115255.773377-1-jiri@resnulli.usSigned-off-by:
-
Jiri Pirko authored
During reload-reinit, all entities except for params, resources, regions and health reporter should be removed and re-added. Add a warning to be triggered in case the driver behaves differently. Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
Jiri Pirko authored
Be more explicit about devlink entities that may stay and that have to be removed during reload reinit action. Signed-off-by:
-
Yujie Liu authored
It seems unnecessary that JSGT is tested twice (one before JSGE and one after JSGE) since others are tested only once. Remove the duplicate JSGT tests. Fixes: 0bbaa02b ("bpf/tests: Add tests to check source register zero-extension") Signed-off-by:
Yujie Liu <yujie.liu@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/bpf/20231130034018.2144963-1-yujie.liu@intel.com
-
Paolo Abeni authored
Claudiu Beznea says: ==================== net: ravb: Fixes for the ravb driver This series adds some fixes for ravb driver. Patches in this series were initilly part of series at [1]. Changes in v2: - in description of patch 1/6 documented the addition of out_free_netdev goto label - collected tags - s/out_runtime_disable/out_rpm_disable in patch 2/6 - fixed typos in description of patch 6/6 Changes since [1]: - addressed review comments - added patch 6/6 [1] https://lore.kernel.org/all/20231120084606.4083194-1-claudiu.beznea.uj@bp.renesas.com/ ==================== Link: https://lore.kernel.org/r/20231128080439.852467-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by:
-
Claudiu Beznea authored
On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet MACs and PHYs it has been discovered that doing unbind/bind for ravb driver in a loop leads to wrong speed and duplex for Ethernet links and broken connectivity (the connectivity cannot be restored even with bringing interface down/up). Before doing unbind/bind the Ethernet interfaces were configured though systemd. The sh instructions used to do unbind/bind were: $ cd /sys/bus/platform/drivers/ravb/ $ while :; do echo 11c30000.ethernet > unbind ; \ echo 11c30000.ethernet > bind; done It has been discovered that there is a race b/w IOCTLs initialized by systemd at the response of success binding and the "ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as follows: 1/ as a result of bind success the user space open/configures the interfaces tough an IOCTL; the following stack trace has been identified on RZ/G3S: Call trace: dump_backtrace+0x9c/0x100 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 ravb_open+0x70/0xa58 __dev_open+0xf4/0x1e8 __dev_change_flags+0x198/0x218 dev_change_flags+0x2c/0x80 devinet_ioctl+0x640/0x708 inet_ioctl+0x1e4/0x200 sock_do_ioctl+0x50/0x108 sock_ioctl+0x240/0x358 __arm64_sys_ioctl+0xb0/0x100 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x190/0x198 2/ this call may execute concurrently with ravb_remove() as the unbind/bind operation was executed in a loop 3/ if the operation mode is changed to RESET (through ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove()) while the above ravb_open() is in progress it may lead to MAC (or PHY, or MAC-PHY connection, the right point hasn't been identified at the moment) to be broken, thus the Ethernet connectivity fails to restore. The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC)) after unregister_netdev() to avoid resetting the controller while the netdev interface is still registered. To avoid future issues in ravb_remove(), the patch follows the proper order of operations in ravb_remove(): reverse order compared with ravb_probe(). This avoids described races as the IOCTLs as well as unregister_netdev() (called now at the beginning of ravb_remove()) calls rtnl_lock() before continuing and IOCTLs check (though devinet_ioctl()) if device is still registered just after taking the lock: int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr) { // ... rtnl_lock(); ret = -ENODEV; dev = __dev_get_by_name(net, ifr->ifr_name); if (!dev) goto done; // ... done: rtnl_unlock(); out: return ret; } Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reviewed-by:Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by:
-
Claudiu Beznea authored
In case ravb_phy_start() returns with error the settings applied in ravb_dmac_init() are not reverted (e.g. config mode). For this call ravb_stop_dma() on failure path of ravb_open(). Fixes: a0d2f206 ("Renesas Ethernet AVB PTP clock driver") Reviewed-by:
-
Claudiu Beznea authored
ravb_phy_start() may fail. If that happens, the TX queues will remain started. Thus, move the netif_tx_start_all_queues() after PHY is successfully initialized. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Claudiu Beznea authored
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the description of CXR35 register (chapter "PHY interface select register (CXR35)"): "After release reset, make write-access to this register before making write-access to other registers (except MDIOMOD). Even if not need to change the value of this register, make write-access to this register at least one time. Because RGMII/MII MODE is recognized by accessing this register". The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S, RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC register that is to be configured. Note [A] from chapter "PHY interface select register (CXR35)" specifies the following: [A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII in APB Clock 100 MHz. (1) To use RGMII interface, Set ‘H’03E8_0000’ to this register. (2) To use MII interface, Set ‘H’03E8_0002’ to this register. Take into account these indication. Fixes: 1089877a ("ravb: Add RZ/G2L MII interface support") Reviewed-by:
-
Claudiu Beznea authored
pm_runtime_get_sync() may return an error. In case it returns with an error dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get() takes care of this. Thus use it. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reviewed-by:
-
Claudiu Beznea authored
reset_control_deassert() could return an error. Some devices cannot work if reset signal de-assert operation fails. To avoid this check the return code of reset_control_deassert() in ravb_probe() and take proper action. Along with it, the free_netdev() call from the error path was moved after reset_control_assert() on its own label (out_free_netdev) to free netdev in case reset_control_deassert() fails. Fixes: 0d13a1a4 ("ravb: Add reset support") Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== tcp: Clean up and refactor cookie_v[46]_check(). This is a preparation series for upcoming arbitrary SYN Cookie support with BPF. [0] There are slight differences between cookie_v[46]_check(). Such a discrepancy caused an issue in the past, and BPF SYN Cookie support will add more churn. The primary purpose of this series is to clean up and refactor cookie_v[46]_check() to minimise such discrepancies and make the BPF series easier to review. [0]: https://lore.kernel.org/netdev/20231121184245.69569-1-kuniyu@amazon.com/ v2: https://lore.kernel.org/netdev/20231125011638.72056-1-kuniyu@amazon.com/ v1: https://lore.kernel.org/netdev/20231123012521.62841-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20231129022924.96156-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
We will support arbitrary SYN Cookie with BPF, and then kfunc at TC will preallocate reqsk and initialise some fields that should not be overwritten later by cookie_v[46]_check(). To simplify the flow in cookie_v[46]_check(), we move such fields' initialisation to cookie_tcp_reqsk_alloc() and factorise non-BPF SYN Cookie handling into cookie_tcp_check(), where we validate the cookie and allocate reqsk, as done by kfunc later. Note that we set ireq->ecn_ok in two steps, the latter of which will be shared by the BPF case. As cookie_ecn_ok() is one-liner, now it's inlined. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
Kuniyuki Iwashima authored
We will support arbitrary SYN Cookie with BPF, and then some reqsk fields are initialised in kfunc, and others are done in cookie_v[46]_check(). This patch factorises the common part as cookie_tcp_reqsk_init() and calls it in cookie_tcp_reqsk_alloc() to minimise the discrepancy between cookie_v[46]_check(). Signed-off-by:
-
