- 29 Nov, 2017 2 commits
-
-
Geert Uytterhoeven authored
On 64-bit (e.g. powerpc64/allmodconfig): drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); ^ cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer. Note that several other fields in struct cdmac_bd are also too small to hold physical addresses on 64-bit platforms. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hyong-Youb Kim authored
Change the maintainer to Chris Lee who has access to Myricom hardware and can test/review. Update the website URL. Signed-off-by:
Hyong-Youb Kim <hykim@myri.com> Signed-off-by:
-
- 28 Nov, 2017 31 commits
-
-
Jiri Pirko authored
q->link.block is not initialized, that leads to EINVAL when one tries to add filter there. So initialize it properly. This can be reproduced by: $ tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 rate 1000Mbit bandwidth 1000Mbit $ tc filter add dev eth0 parent 1: protocol ip prio 100 u32 match ip protocol 0 0x00 flowid 1:1 Reported-by:
Jaroslav Aster <jaster@redhat.com> Reported-by:
Ivan Vecera <ivecera@redhat.com> Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Reviewed-by:
-
Colin Ian King authored
Remove a leading space, fixes indentation Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't use %x and casting to print out a kernel address, instead use %p and remove the casting. Cleans up smatch warnings: drivers/atm/lanai.c:1589 service_buffer_allocate() warn: argument 2 to %08lX specifier is cast from pointer drivers/atm/lanai.c:2221 lanai_dev_open() warn: argument 4 to %lx specifier is cast from pointer Signed-off-by:
-
Jorgen Hansen authored
A recent commit (3b4477d2) converted the sk_state to use TCP constants. In that change, vmci_transport_handle_detach was changed such that sk->sk_state was set to TCP_CLOSE before we test whether it is TCP_SYN_SENT. This change moves the sk_state change back to the original locations in that function. Signed-off-by:
Jorgen Hansen <jhansen@vmware.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Colin Ian King authored
Don't use %x and casting to print out a kernel address, instead use the %pK and remove the casting. Cleans up smatch warning: drivers/atm/fore200e.c:3093 fore200e_proc_read() warn: argument 3 to %08x specifier is cast from pointer Signed-off-by:
-
Colin Ian King authored
Remove one extraneous level of indentation on assignment statement. Signed-off-by:
-
Xin Long authored
All callers of __vxlan_fdb_delete pass vni with __be32 type, and this param should be declared as __be32 type. Fixes: 3ad7a4b1 ("vxlan: support fdb and learning in COLLECT_METADATA mode") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
bond_opt_initval expects a u64 type param, it's better to use nla_get_u64 to extract the value here, to eliminate a sparse endianness mismatch warning. Fixes: 171a42c3 ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by:
-
Xin Long authored
Commit d04adf1b ("sctp: reset owner sk for data chunks on out queues when migrating a sock") made a mistake that using 'list' as the param of list_for_each_entry to traverse the retransmit, sacked and abandoned queues, while chunks are using 'transmitted_list' to link into these queues. It could cause NULL dereference panic if there are chunks in any of these queues when peeling off one asoc. So use the chunk member 'transmitted_list' instead in this patch. Fixes: d04adf1b ("sctp: reset owner sk for data chunks on out queues when migrating a sock") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Paolo Abeni authored
While converting sch_sfq to use timer_setup(), the commit cdeabbb8 ("net: sched: Convert timers to use timer_setup()") forgot to initialize the 'sch' field. As a result, the timer callback tries to dereference a NULL pointer, and the kernel does oops. Fix it initializing such field at qdisc creation time. Fixes: cdeabbb8 ("net: sched: Convert timers to use timer_setup()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Jakub Kicinski authored
When cls_bpf offload was added it seemed like a good idea to call cls_bpf_delete_prog() instead of extending the error handling path, since the software state is fully initialized at that point. This handling of errors without jumping to the end of the function is error prone, as proven by later commit missing that extra call to __cls_bpf_delete_prog(). __cls_bpf_delete_prog() is now expected to be invoked with a reference on exts->net or the field zeroed out. The call on the offload's error patch does not fullfil this requirement, leading to each error stealing a reference on net namespace. Create a function undoing what cls_bpf_set_parms() did and use it from __cls_bpf_delete_prog() and the error path. Fixes: aae2c35e ("cls_bpf: use tcf_exts_get_net() before call_rcu()") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Eric Dumazet authored
syzbot reported crashes [1] and provided a C repro easing bug hunting. When/if packet_do_bind() calls __unregister_prot_hook() and releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This calls register_prot_hook() and hooks again the socket right before first thread is able to grab again po->bind_lock. Fixes this issue by temporarily setting po->num to 0, as suggested by David Miller. [1] dev_remove_pack: ffff8801bf16fa80 not found ------------[ cut here ]------------ kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); ) invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: device syz0 entered promiscuous mode CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cc57a500 task.stack: ffff8801cc588000 RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945 RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293 RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2 RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810 device syz0 entered promiscuous mode RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8 R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0 FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106 tun_detach drivers/net/tun.c:670 [inline] tun_chr_close+0x49/0x60 drivers/net/tun.c:2845 __fput+0x333/0x7f0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ae0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 SYSC_exit_group kernel/exit.c:979 [inline] SyS_exit_group+0x1d/0x20 kernel/exit.c:977 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x44ad19 Fixes: 30f7ea1c ("packet: race condition in packet_bind") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by:
-
Mike Maloney authored
syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1e ("packet: avoid panic in packet_getsockopt()") Reported-by:
Mike Maloney <maloney@google.com> Reviewed-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: fix some other sparse errors After the last fixes for sparse errors, there are still three sparse errors in sctp codes, two of them are type cast, and the other one is using extern. ==================== Signed-off-by: -
Xin Long authored
Now each stream sched ops is defined in different .c file and added into the global ops in another .c file, it uses extern to make this work. However extern is not good coding style to get them in and even make C=2 reports errors for this. This patch adds sctp_sched_ops_xxx_init for each stream sched ops in their .c file, then get them into the global ops by calling them when initializing sctp module. Fixes: 637784ad ("sctp: introduce priority based stream scheduler") Fixes: ac1ed8b8 ("sctp: introduce round robin stream scheduler") Signed-off-by:
-
Xin Long authored
Now sctp_csum_xxx doesn't really match the param types of these common csum apis. As sctp_csum_xxx is defined in sctp/checksum.h, many sparse errors occur when make C=2 not only with M=net/sctp but also with other modules that include this header file. This patch is to force them fit in csum apis with the right types. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Signed-off-by:
-
Xin Long authored
This patch is to force SCTP_ERROR_INV_STRM with right type to fit in sctp_chunk_fail to avoid the sparse error. Signed-off-by:
-
Vasyl Gomonovych authored
Fix coccicheck warning which recommends to use memdup_user(): drivers/net/wan/lmc/lmc_main.c:497:27-34: WARNING opportunity for memdup_user Generated by: scripts/coccinelle/memdup_user/memdup_user.cocci Signed-off-by:
Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
Error code returned by 'bnxt_read_sfp_module_eeprom_info()' is handled a few lines above when reading the A0 portion of the EEPROM. The same should be done when reading the A2 portion of the EEPROM. In order to correctly propagate an error, update 'rc' in this 2nd call as well, otherwise 0 (success) is returned. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Antoine Tenart authored
The Marvell 10G PHY driver supports different hardware revisions, which have their bits 3..0 differing. To get the correct revision number these bits should be ignored. This patch fixes this by using the already defined MARVELL_PHY_ID_MASK (0xfffffff0) instead of the custom 0xffffffff mask. Fixes: 20b2af32 ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Suggested-by:
Yan Markman <ymarkman@marvell.com> Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvpp2: set of fixes This series fixes various issues with the Marvell PPv2 driver. The patches are sent together to avoid any possible conflict. The series is based on today's net tree. ==================== Signed-off-by: -
Antoine Tenart authored
This patch fixes the Tx ring size checks when using ethtool, by adding an extra check in the PPv2 check_ringparam_valid helper. The Tx ring size cannot be set to a value smaller than the minimum number of descriptors needed for TSO. Fixes: 1d17db08 ("net: mvpp2: limit TSO segments and use stop/wake thresholds") Suggested-by:
-
Yan Markman authored
Short fragmented packets may never be sent by the hardware when padding is disabled. This patch stop modifying the GMAC padding bits, to leave them to their reset value (disabled). Fixes: 3919357f ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by:
-
Antoine Tenart authored
This patches fixes the probe error path by cleaning up probed ports, to avoid leaving registered net devices when the driver failed to probe. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
-
Antoine Tenart authored
When an allocation in the txq_init path fails, the allocated buffers end-up being freed twice: in the txq_init error path, and in txq_deinit. This lead to issues as txq_deinit would work on already freed memory regions: kernel BUG at mm/slub.c:3915! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP This patch fixes this by removing the txq_init own error path, as the txq_deinit function is always called on errors. This was introduced by TSO as way more buffers are allocated. Fixes: 186cd4d4 ("net: mvpp2: software tso support") Signed-off-by: -
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: GRE offloading fixes Petr says: This patchset fixes a couple bugs in offloading GRE tunnels in mlxsw driver. Patch #1 fixes a problem that local routes pointing at a GRE tunnel device are offloaded even if that netdevice is down. Patch #2 detects that as a result of moving a GRE netdevice to a different VRF, two tunnels now have a conflict of local addresses, something that the mlxsw driver can't offload. Patch #3 fixes a FIB abort caused by forming a route pointing at a GRE tunnel that is eligible for offloading but already onloaded. Patch #4 fixes a problem that next hops migrated to a new RIF kept the old RIF reference, which went dangling shortly afterwards. ==================== Signed-off-by: -
Petr Machata authored
The function mlxsw_sp_nexthop_rif_update() walks the list of nexthops associated with a RIF, and updates the corresponding entries in the switch. It is used in particular when a tunnel underlay netdevice moves to a different VRF, and all the nexthops are migrated over to a new RIF. The problem is that each nexthop holds a reference to its RIF, and that is not updated. So after the old RIF is gone, further activity on these nexthops (such as downing the underlay netdevice) dereferences a dangling pointer. Fix the issue by updating rif of impacted nexthops before calling mlxsw_sp_nexthop_rif_update(). Fixes: 0c5f1cd5 ("mlxsw: spectrum_router: Generalize __mlxsw_sp_ipip_entry_update_tunnel()") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
Some tunnels that are offloadable on their own can nonetheless be demoted to slow path if their local address is in conflict with that of another tunnel. When a route is formed for such a tunnel, mlxsw_sp_nexthop_ipip_init() fails to find the corresponding IPIP entry, and that triggers a FIB abort. Resolve the problem by not assuming that a tunnel for which mlxsw_sp_ipip_ops.can_offload() holds also automatically has an IPIP entry. Fixes: af641713 ("mlxsw: spectrum_router: Onload conflicting tunnels") Signed-off-by:
-
Petr Machata authored
The mlxsw driver currently doesn't offload GRE tunnels if they have the same local address and use the same underlay VRF. When such a situation arises, the tunnels in conflict are demoted to slow path. However, the current code only verifies this condition on tunnel creation and tunnel change, not when a tunnel is moved to a different VRF. When the tunnel has no bound device, underlay and overlay are the same. Thus moving a tunnel moves the underlay as well, and that can cause local address conflict. So modify mlxsw_sp_netdevice_ipip_ol_vrf_event() to check if there are any conflicting tunnels, and demote them if yes. Fixes: af641713 ("mlxsw: spectrum_router: Onload conflicting tunnels") Signed-off-by:
-
Petr Machata authored
When a new local route is added, an IPIP entry is looked up to determine whether the route should be offloaded as a tunnel decap or as a trap. That decision should take into account whether the tunnel netdevice in question is actually IFF_UP, and only install a decap offload if it is. Fixes: 0063587d ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2017-11-27 This series contains updates to e1000, e1000e and i40e. Gustavo A. R. Silva fixes a sizeof() issue where we were taking the size of the pointer (which is always the size of the pointer). Sasha does a follow up fix to a previous fix for buffer overrun, to resolve community feedback from David Laight and the use of magic numbers. Amritha fixes the reporting of error codes for when adding a cloud filter fails. Ahmad Fatoum brushes the dust off the e1000 driver to fix a code comment and debug message which was incorrect about what the code was really doing. ==================== Signed-off-by:
-
- 27 Nov, 2017 7 commits
-
-
Ahmad Fatoum authored
Signed-off-by:
Ahmad Fatoum <ahmad@a3f.at> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Amritha Nambiar authored
Adding cloud filters could fail for a number of reasons, unsupported filter fields for example, which fails during validation of fields itself. This will not result in admin command errors and converting the admin queue status to posix error code using i40e_aq_rc_to_posix would result in incorrect error values. If the failure was due to AQ error itself, reporting that correctly is handled in the inner function. Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Sasha Neftin authored
This is a follow on to commit b10effb9 ("fix buffer overrun while the I219 is processing DMA transactions") to address David Laights concerns about the use of "magic" numbers. So define masks as well as add additional code comments to give a better understanding of what needs to be done to avoid a buffer overrun. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Reviewed-by:
Alexander H Duyck <alexander.h.duyck@intel.com> Reviewed-by:
Dima Ruinskiy <dima.ruinskiy@intel.com> Reviewed-by:
Raanan Avargil <raanan.avargil@intel.com> Tested-by:
-
Gustavo A R Silva authored
sizeof when applied to a pointer typed expression gives the size of the pointer. The proper fix in this particular case is to code sizeof(*vfres) instead of sizeof(vfres). This issue was detected with the help of Coccinelle. Signed-off-by:
Gustavo A R Silva <garsilva@embeddedor.com> Tested-by:
-
Jon Maloy authored
KASAN revealed another access after delete in group.c. This time it found that we read the header of a received message after the buffer has been released. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Eduardo Otubo authored
v2: * Replace busy wait with wait_event()/wake_up_all() * Cannot garantee that at the time xennet_remove is called, the xen_netback state will not be XenbusStateClosed, so added a condition for that * There's a small chance for the xen_netback state is XenbusStateUnknown by the time the xen_netfront switches to Closed, so added a condition for that. When unloading module xen_netfront from guest, dmesg would output warning messages like below: [ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use! [ 105.236839] deferring g.e. 0x903 (pfn 0x35805) This problem relies on netfront and netback being out of sync. By the time netfront revokes the g.e.'s netback didn't have enough time to free all of them, hence displaying the warnings on dmesg. The trick here is to make netfront to wait until netback frees all the g.e.'s and only then continue to cleanup for the module removal, and this is done by manipulating both device states. Signed-off-by:
Eduardo Otubo <otubo@redhat.com> Acked-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Four fixes: * CRYPTO_SHA256 is needed for regdb validation * mac80211: mesh path metric was wrong in some frames * mac80211: use QoS null-data packets on QoS connections * mac80211: tear down RX aggregation sessions first to drop fewer packets in HW restart scenarios ==================== Signed-off-by:
-
