- 22 Feb, 2018 40 commits
-
-
Tom St Denis authored
commit 95244db2 upstream. The buf pointer was not being incremented inside the loop meaning the same block of data would be read or written repeatedly. (v2) Change 'buf' pointer to uint8_t* type Cc: stable@vger.kernel.org Fixes: 09ac4fcb ("drm/ttm: Implement vm_operations_struct.access v2") Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felix Kuehling authored
commit fd5002d6 upstream. A BO that's already swapped would be added back to the swap-LRU list for example if its validation failed under high memory pressure. This could later lead to swapping it out again and leaking previous swap storage. This commit adds a condition to prevent that from happening. v2: Check page_flags instead of swap_storage Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Ingo Molnar authored
commit e4865757 upstream. Josh Poimboeuf noticed the following bug: "The paranoid exit code only restores the saved CR3 when it switches back to the user GS. However, even in the kernel GS case, it's possible that it needs to restore a user CR3, if for example, the paranoid exception occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and SWAPGS." Josh also confirmed via targeted testing that it's possible to hit this bug. Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch. The reason we haven't seen this bug reported by users yet is probably because "paranoid" entry points are limited to the following cases: idtentry double_fault do_double_fault has_error_code=1 paranoid=2 idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry machine_check do_mce has_error_code=0 paranoid=1 Amongst those entry points only machine_check is one that will interrupt an IRQS-off critical section asynchronously - and machine check events are rare. The other main asynchronous entries are NMI entries, which can be very high-freq with perf profiling, but they are special: they don't use the 'idtentry' macro but are open coded and restore user CR3 unconditionally so don't have this bug. Reported-and-tested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180214073910.boevmg65upbk3vqb@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 24dbc600 upstream. Currently, x86_cache_size is of type int, which makes no sense as we will never have a valid cache size equal or less than 0. So instead of initializing this variable to -1, it can perfectly be initialized to 0 and use it as an unsigned variable instead. Suggested-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Addresses-Coverity-ID: 1464429 Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.comSigned-off-by:
-
Dan Carpenter authored
commit 9de29eac upstream. If i == ARRAY_SIZE(mitigation_options) then we accidentally print garbage from one space beyond the end of the mitigation_options[] array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: 9005c683 ("x86/spectre: Simplify spectre_v2 command line parsing") Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwandaSigned-off-by:
-
Jia Zhang authored
commit b399151c upstream. x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by:
Jia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.comSigned-off-by:
-
Rui Wang authored
commit 961888b1 upstream. For distributions with old userspace header files, the _sigfault structure is different. mpx-mini-test fails with the following error: [root@Purley]# mpx-mini-test_64 tabletest XSAVE is supported by HW & OS XSAVE processor supported state mask: 0x2ff XSAVE OS supported state mask: 0x2ff BNDREGS: size: 64 user: 1 supervisor: 0 aligned: 0 BNDCSR: size: 64 user: 1 supervisor: 0 aligned: 0 starting mpx bounds table test ERROR: siginfo bounds do not match shadow bounds for register 0 Fix it by using the correct offset of _lower/_upper in _sigfault. RHEL needs this patch to work. Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@linux.intel.com Fixes: e754aedc ("x86/mpx, selftests: Add MPX self test") Link: http://lkml.kernel.org/r/1513586050-1641-1-git-send-email-rui.y.wang@intel.comSigned-off-by:
-
Andy Lutomirski authored
commit 1299ef1d upstream. flush_tlb_single() and flush_tlb_one() sound almost identical, but they really mean "flush one user translation" and "flush one kernel translation". Rename them to flush_tlb_one_user() and flush_tlb_one_kernel() to make the semantics more obvious. [ I was looking at some PTI-related code, and the flush-one-address code is unnecessarily hard to understand because the names of the helpers are uninformative. This came up during PTI review, but no one got around to doing it. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-MM <linux-mm@kvack.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.orgSigned-off-by:
-
Michal Hocko authored
commit f335195a upstream. Commit 4675ff05 ("kmemcheck: rip it out") has removed the code but for some reason SPDX header stayed in place. This looks like a rebase mistake in the mmotm tree or the merge mistake. Let's drop those leftovers as well. Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit 4675ff05 upstream. Fix up makefiles, remove references, and git rm kmemcheck. Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.comSigned-off-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Potapenko <glider@google.com> Cc: Tim Hansen <devtimhansen@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit d8be7566 upstream. Now that kmemcheck is gone, we don't need the NOTRACK flags. Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.comSigned-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit 75f296d9 upstream. Convert all allocations that used a NOTRACK flag to stop using it. Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.comSigned-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit 49502766 upstream. Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.comSigned-off-by:
-
Peter Zijlstra authored
commit ea00f301 upstream. Joe Konno reported a compile failure resulting from using an MSR without inclusion of <asm/msr-index.h>, and while the current code builds fine (by accident) this needs fixing for future patches. Reported-by:
Joe Konno <joe.konno@linux.intel.com> Signed-off-by:
-
Will Deacon authored
commit 8fa80c50 upstream. For architectures providing their own implementation of array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to complain about out-of-range parameters using WARN_ON() results in a mess of mutually-dependent include files. Rather than unpick the dependencies, simply have the core code in nospec.h perform the checking for us. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
Dan Williams authored
commit be3233fb upstream. Allow the compiler to handle @size as an immediate value or memory directly rather than allocating a register. Reported-by:
Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Peter Zijlstra authored
commit 3b3a371c upstream. Since the Intel SDM added an ModR/M byte to UD0 and binutils followed that specification, we now cannot disassemble our kernel anymore. This now means Intel and AMD disagree on the encoding of UD0. And instead of playing games with additional bytes that are valid ModR/M and single byte instructions (0xd6 for instance), simply use UD2 for both WARN() and BUG(). Requested-by:
-
Josh Poimboeuf authored
commit 2b5db668 upstream. By default, objtool assumes that a UD2 is a dead end. This is mainly because GCC 7+ sometimes inserts a UD2 when it detects a divide-by-zero condition. Now that WARN() is moving back to UD2, annotate the code after it as reachable so objtool can follow the code flow. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Josh Poimboeuf authored
commit fe24e271 upstream. Peter Zijlstra's patch for converting WARN() to use UD2 triggered a bunch of false "unreachable instruction" warnings, which then triggered a seg fault in ignore_unreachable_insn(). The seg fault happened when it tried to dereference a NULL 'insn->func' pointer. Thanks to static_cpu_has(), some functions can jump to a non-function area in the .altinstr_aux section. That breaks ignore_unreachable_insn()'s assumption that it's always inside the original function. Make sure ignore_unreachable_insn() only follows jumps within the current function. Reported-by:
-
Dominik Brodowski authored
commit 9279ddf2 upstream. The ldt_gdt and ptrace_syscall selftests, even in their 64-bit variant, use hard-coded 32-bit syscall numbers and call "int $0x80". This will fail on 64-bit systems with CONFIG_IA32_EMULATION=y disabled. Therefore, do not build these tests if we cannot build 32-bit binaries (which should be a good approximation for CONFIG_IA32_EMULATION=y being enabled). Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Link: http://lkml.kernel.org/r/20180211111013.16888-6-linux@dominikbrodowski.netSigned-off-by:
-
Dominik Brodowski authored
commit 4105c697 upstream. On 64-bit builds, we should not rely on "int $0x80" working (it only does if CONFIG_IA32_EMULATION=y is enabled). To keep the "Set TF and check int80" test running on 64-bit installs with CONFIG_IA32_EMULATION=y enabled, build this test only if we can also build 32-bit binaries (which should be a good approximation for that). Signed-off-by:
-
Dominik Brodowski authored
commit 2cbc0d66 upstream. On 64-bit builds, we should not rely on "int $0x80" working (it only does if CONFIG_IA32_EMULATION=y is enabled). Without this patch, the move test may succeed, but the "int $0x80" causes a segfault, resulting in a false negative output of this self-test. Signed-off-by:
-
Ingo Molnar authored
commit ce676638 upstream. This also gets rid of two build warnings: protection_keys.c: In function ‘dumpit’: protection_keys.c:419:3: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result] write(1, buf, nr_read); ^~~~~~~~~~~~~~~~~~~~~~ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Dominik Brodowski authored
commit d8e92de8 upstream. Replace a couple of magically connected buffer length literal constants with a common definition that makes their relationship obvious. Also document why our sscanf() usage is safe. No intended functional changes. Suggested-by:
-
Dominik Brodowski authored
commit 198ee8e1 upstream. The vDSO selftest tries to execute a vsyscall unconditionally, even if it is not present on the test system (e.g. if booted with vsyscall=none or with CONFIG_LEGACY_VSYSCALL_NONE=y set. Fix this by copying (and tweaking) the vsyscall check from test_vsyscall.c Signed-off-by:
-
Borislav Petkov authored
commit b498c261 upstream. That macro was touched around 2.5.8 times, judging by the full history linux repo, but it was unused even then. Get rid of it already. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux@dominikbrodowski.net Link: http://lkml.kernel.org/r/20180212201318.GD14640@pd.tnicSigned-off-by:
-
Josh Poimboeuf authored
commit b3ccefae upstream. With the following commit: f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros") ... one of my suggested improvements triggered a frame pointer warning: arch/x86/entry/entry_64.o: warning: objtool: paranoid_entry()+0x11: call without frame pointer save/setup The warning is correct for the build-time code, but it's actually not relevant at runtime because of paravirt patching. The paravirt swapgs call gets replaced with either a SWAPGS instruction or NOPs at runtime. Go back to the previous behavior by removing the ELF function annotation for paranoid_entry() and adding an unwind hint, which effectively silences the warning. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Dominik Brodowski authored
commit 92816f57 upstream. ... same as the other macros in arch/x86/entry/calling.h Signed-off-by:
-
Dominik Brodowski authored
commit dde3036d upstream. Previously, error_entry() and paranoid_entry() saved the GP registers onto stack space previously allocated by its callers. Combine these two steps in the callers, and use the generic PUSH_AND_CLEAR_REGS macro for that. This adds a significant amount ot text size. However, Ingo Molnar points out that: "these numbers also _very_ significantly over-represent the extra footprint. The assumptions that resulted in us compressing the IRQ entry code have changed very significantly with the new x86 IRQ allocation code we introduced in the last year: - IRQ vectors are usually populated in tightly clustered groups. With our new vector allocator code the typical per CPU allocation percentage on x86 systems is ~3 device vectors and ~10 fixed vectors out of ~220 vectors - i.e. a very low ~6% utilization (!). [...] The days where we allocated a lot of vectors on every CPU and the compression of the IRQ entry code text mattered are over. - Another issue is that only a small minority of vectors is frequent enough to actually matter to cache utilization in practice: 3-4 key IPIs and 1-2 device IRQs at most - and those vectors tend to be tightly clustered as well into about two groups, and are probably already on 2-3 cache lines in practice. For the common case of 'cache cold' IRQs it's the depth of the call chain and the fragmentation of the resulting I$ that should be the main performance limit - not the overall size of it. - The CPU side cost of IRQ delivery is still very expensive even in the best, most cached case, as in 'over a thousand cycles'. So much stuff is done that maybe contemporary x86 IRQ entry microcode already prefetches the IDT entry and its expected call target address."[*] [*] http://lkml.kernel.org/r/20180208094710.qnjixhm6hybebdv7@gmail.com The "testb $3, CS(%rsp)" instruction in the idtentry macro does not need modification. Previously, %rsp was manually decreased by 15*8; with this patch, %rsp is decreased by 15 pushq instructions. [jpoimboe@redhat.com: unwind hint improvements] Suggested-by:
-
Dominik Brodowski authored
commit 30907fd1 upstream. entry_SYSCALL_64_after_hwframe() and nmi() can be converted to use PUSH_AND_CLEAN_REGS instead of opencoded variants thereof. Due to the interleaving, the additional XOR-based clearing of R8 and R9 in entry_SYSCALL_64_after_hwframe() should not have any noticeable negative implications. Suggested-by:
-
Dominik Brodowski authored
commit 3f01daec upstream. Those instances where ALLOC_PT_GPREGS_ON_STACK is called just before SAVE_AND_CLEAR_REGS can trivially be replaced by PUSH_AND_CLEAN_REGS. This macro uses PUSH instead of MOV and should therefore be faster, at least on newer CPUs. Suggested-by:
-
Dominik Brodowski authored
commit f7bafa2b upstream. Same as is done for syscalls, interleave XOR with PUSH instructions for exceptions/interrupts, in order to minimize the cost of the additional instructions required for register clearing. Signed-off-by:
-
Dominik Brodowski authored
commit 502af0d7 upstream. The two special, opencoded cases for POP_C_REGS can be handled by ASM macros. Signed-off-by:
-
Dominik Brodowski authored
commit 2e3f0098 upstream. All current code paths call SAVE_C_REGS and then immediately SAVE_EXTRA_REGS. Therefore, merge these two macros and order the MOV sequeneces properly. While at it, remove the macros to save all except specific registers, as these macros have been unused for a long time. Suggested-by:
-
Dan Williams authored
commit 3ac6d8c7 upstream. Clear the 'extra' registers on entering the 64-bit kernel for exceptions and interrupts. The common registers are not cleared since they are likely clobbered well before they can be exploited in a speculative execution attack. Originally-From: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit d7212cfb upstream. Commit f8594220 (x86: PM: Make APM idle driver initialize polling state) made apm_init() call cpuidle_poll_state_init(), but that only is defined for CONFIG_CPU_IDLE set, so make the empty stub of it available for CONFIG_CPU_IDLE unset too to fix the resulting build issue. Fixes: f8594220 (x86: PM: Make APM idle driver initialize polling state) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lukas Wunner authored
commit 433986c2 upstream. Commit baa8809f (PM / runtime: Optimize the use of device links) added an invocation of pm_runtime_drop_link() to __device_link_del(). However there are two variants of that function, one for CONFIG_SRCU and another for !CONFIG_SRCU, and the commit only modified the former. Fixes: baa8809f (PM / runtime: Optimize the use of device links) Cc: v4.10+ <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Ingo Molnar authored
commit 21e433bd upstream. Harmonize all the Spectre messages so that a: dmesg | grep -i spectre ... gives us most Spectre related kernel boot messages. Also fix a few other details: - clarify a comment about firmware speculation control - s/KPTI/PTI - remove various line-breaks that made the code uglier Acked-by:
David Woodhouse <dwmw@amazon.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
KarimAllah Ahmed authored
commit 3712caeb upstream. We either clear the CPU_BASED_USE_MSR_BITMAPS and end up intercepting all MSR accesses or create a valid L02 MSR bitmap and use that. This decision has to be made every time we evaluate whether we are going to generate the L02 MSR bitmap. Before commit: d28b387f ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL") ... this was probably OK since the decision was always identical. This is no longer the case now since the MSR bitmap might actually change once we decide to not intercept SPEC_CTRL and PRED_CMD. Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan.van.de.ven@intel.com Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: kvm@vger.kernel.org Cc: sironi@amazon.de Link: http://lkml.kernel.org/r/1518305967-31356-6-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
KarimAllah Ahmed authored
commit 206587a9 upstream. These two variables should check whether SPEC_CTRL and PRED_CMD are supposed to be passed through to L2 guests or not. While msr_write_intercepted_l01 would return 'true' if it is not passed through. So just invert the result of msr_write_intercepted_l01 to implement the correct semantics. Signed-off-by:
Jim Mattson <jmattson@google.com> Acked-by:
-
