- 07 Feb, 2023 4 commits
-
-
Eddy Tao authored
Use actual CPU number instead of hardcoded value to decide the size of 'cpu_used_mask' in 'struct sw_flow'. Below is the reason. 'struct cpumask cpu_used_mask' is embedded in struct sw_flow. Its size is hardcoded to CONFIG_NR_CPUS bits, which can be 8192 by default, it costs memory and slows down ovs_flow_alloc. To address this: Redefine cpu_used_mask to pointer. Append cpumask_size() bytes after 'stat' to hold cpumask. Initialization cpu_used_mask right after stats_last_writer. APIs like cpumask_next and cpumask_set_cpu never access bits beyond cpu count, cpumask_size() bytes of memory is enough. Signed-off-by:
Eddy Tao <taoyuan_eddy@hotmail.com> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/OS3P286MB229570CCED618B20355D227AF5D59@OS3P286MB2295.JPNP286.PROD.OUTLOOK.COMSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Arnd Bergmann authored
The forward declaration was introduced with a prototype that does not match the function definition: drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd, enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch] 2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int, unsigned int)' 391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Ideally there should not be any forward declarations here, which would make it easier to show that there is no unbounded recursion. I tried fixing this but could not figure out how to avoid the recursive call. As a hotfix, address only the broken prototype to fix the build problem instead. Fixes: 4f3b20bf ("amd-xgbe: add support for rx-adaptation") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230203121553.2871598-1-arnd@kernel.orgSigned-off-by:
-
Colin Foster authored
There are no external users of the vsc7514_*_regmap[] symbols or vsc7514_vcap_* functions. They were exported in commit 32ecd22b ("net: mscc: ocelot: split register definitions to a separate file") with the intention of being used, but the actual structure used in commit 2efaca41 ("net: mscc: ocelot: expose vsc7514_regmap definition") ended up being all that was needed. Bury these unnecessary symbols. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Suggested-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230204182056.25502-1-colin.foster@in-advantage.comSigned-off-by:
-
https://github.com/ajitkhaparde1/linuxJakub Kicinski authored
Ajit Khaparde says: ==================== bnxt: Add Auxiliary driver support Add auxiliary device driver for Broadcom devices. The bnxt_en driver will register and initialize an aux device if RDMA is enabled in the underlying device. The bnxt_re driver will then probe and initialize the RoCE interfaces with the infiniband stack. We got rid of the bnxt_en_ops which the bnxt_re driver used to communicate with bnxt_en. Similarly We have tried to clean up most of the bnxt_ulp_ops. In most of the cases we used the functions and entry points provided by the auxiliary bus driver framework. And now these are the minimal functions needed to support the functionality. We will try to work on getting rid of the remaining if we find any other viable option in future. * 'aux-bus-v11' of https://github.com/ajitkhaparde1/linux: bnxt_en: Remove runtime interrupt vector allocation RDMA/bnxt_re: Remove the sriov config callback bnxt_en: Remove struct bnxt access from RoCE driver bnxt_en: Use auxiliary bus calls over proprietary calls bnxt_en: Use direct API instead of indirection bnxt_en: Remove usage of ulp_id RDMA/bnxt_re: Use auxiliary driver interface bnxt_en: Add auxiliary driver support ==================== Link: https://lore.kernel.org/r/20230202033809.3989-1-ajit.khaparde@broadcom.comSigned-off-by:
-
- 06 Feb, 2023 36 commits
-
-
David S. Miller authored
Pietro Borrello says: ==================== tuntap: correctly initialize socket uid sock_init_data() assumes that the `struct socket` passed in input is contained in a `struct socket_alloc` allocated with sock_alloc(). However, tap_open() and tun_chr_open() pass a `struct socket` embedded in a `struct tap_queue` and `struct tun_file` respectively, both allocated with sk_alloc(). This causes a type confusion when issuing a container_of() with SOCK_INODE() in sock_init_data() which results in assigning a wrong sk_uid to the `struct sock` in input. Due to the type confusion, both sockets happen to have their uid set to 0, i.e. root. While it will be often correct, as tuntap devices require CAP_NET_ADMIN, it may not always be the case. Not sure how widespread is the impact of this, it seems the socket uid may be used for network filtering and routing, thus tuntap sockets may be incorrectly managed. Additionally, it seems a socket with an incorrect uid may be returned to the vhost driver when issuing a get_socket() on a tuntap device in vhost_net_set_backend(). Fix the bugs by adding and using sock_init_data_uid(), which explicitly takes a uid as argument. Signed-off-by:
Pietro Borrello <borrello@diag.uniroma1.it> --- Changes in v3: - Fix the bug by defining and using sock_init_data_uid() - Link to v2: https://lore.kernel.org/r/20230131-tuntap-sk-uid-v2-0-29ec15592813@diag.uniroma1.it Changes in v2: - Shorten and format comments - Link to v1: https://lore.kernel.org/r/20230131-tuntap-sk-uid-v1-0-af4f9f40979d@diag.uniroma1.it ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pietro Borrello authored
sock_init_data() assumes that the `struct socket` passed in input is contained in a `struct socket_alloc` allocated with sock_alloc(). However, tap_open() passes a `struct socket` embedded in a `struct tap_queue` allocated with sk_alloc(). This causes a type confusion when issuing a container_of() with SOCK_INODE() in sock_init_data() which results in assigning a wrong sk_uid to the `struct sock` in input. On default configuration, the type confused field overlaps with padding bytes between `int vnet_hdr_sz` and `struct tap_dev __rcu *tap` in `struct tap_queue`, which makes the uid of all tap sockets 0, i.e., the root one. Fix the assignment by using sock_init_data_uid(). Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Pietro Borrello authored
sock_init_data() assumes that the `struct socket` passed in input is contained in a `struct socket_alloc` allocated with sock_alloc(). However, tun_chr_open() passes a `struct socket` embedded in a `struct tun_file` allocated with sk_alloc(). This causes a type confusion when issuing a container_of() with SOCK_INODE() in sock_init_data() which results in assigning a wrong sk_uid to the `struct sock` in input. On default configuration, the type confused field overlaps with the high 4 bytes of `struct tun_struct __rcu *tun` of `struct tun_file`, NULL at the time of call, which makes the uid of all tun sockets 0, i.e., the root one. Fix the assignment by using sock_init_data_uid(). Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.") Signed-off-by:
-
Pietro Borrello authored
Add sock_init_data_uid() to explicitly initialize the socket uid. To initialise the socket uid, sock_init_data() assumes a the struct socket* sock is always embedded in a struct socket_alloc, used to access the corresponding inode uid. This may not be true. Examples are sockets created in tun_chr_open() and tap_open(). Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.") Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== net: ENETC mqprio/taprio cleanup Please excuse the increased patch set size compared to v4's 15 patches, but Claudiu stirred up the pot :) when he pointed out that the mqprio TXQ validation procedure is still incorrect, so I had to fix that, and then do some consolidation work so that taprio doesn't duplicate mqprio's bugs. Compared to v4, 3 patches are new and 1 was dropped for now ("net/sched: taprio: mask off bits in gate mask that exceed number of TCs"), since there's not really much to gain from it. Since the previous patch set has largely been reviewed, I hope that a delta overview will help and make up for the large size. v4->v5: - new patches: "[08/17] net/sched: mqprio: allow reverse TC:TXQ mappings" "[11/17] net/sched: taprio: centralize mqprio qopt validation" "[12/17] net/sched: refactor mqprio qopt reconstruction to a library function" - changed patches worth revisiting: "[09/17] net/sched: mqprio: allow offloading drivers to request queue count validation" v4 at: https://patchwork.kernel.org/project/netdevbpf/cover/20230130173145.475943-1-vladimir.oltean@nxp.com/ v3->v4: - adjusted patch 07/15 to not remove "#include <net/pkt_sched.h>" from ti cpsw https://patchwork.kernel.org/project/netdevbpf/cover/20230127001516.592984-1-vladimir.oltean@nxp.com/ v2->v3: - move min_num_stack_tx_queues definition so it doesn't conflict with the ethtool mm patches I haven't submitted yet for enetc (and also to make use of a 4 byte hole) - warn and mask off excess TCs in gate mask instead of failing - finally CC qdisc maintainers v2 at: https://patchwork.kernel.org/project/netdevbpf/patch/20230126125308.1199404-16-vladimir.oltean@nxp.com/ v1->v2: - patches 1->4 are new - update some header inclusions in drivers - fix typo (said "taprio" instead of "mqprio") - better enetc mqprio error handling - dynamically reconstruct mqprio configuration in taprio offload - also let stmmac and tsnep use per-TXQ gate_mask v1 (RFC) at: https://patchwork.kernel.org/project/netdevbpf/cover/20230120141537.1350744-1-vladimir.oltean@nxp.com/ The main goal of this patch set is to make taprio pass the mqprio queue configuration structure down to ndo_setup_tc() - patch 13/17. But mqprio itself is not in the best shape currently, so there are some consolidation patches on that as well. Next, there are some consolidation patches in the enetc driver's handling of TX queues and their traffic class assignment. Then, there is a consolidation between the TX queue configuration for mqprio and taprio. Finally, there is a change in the meaning of the gate_mask passed by taprio through ndo_setup_tc(). We introduce a capability through which drivers can request the gate mask to be per TXQ. The default is changed so that it is per TC. ==================== Signed-off-by: -
Vladimir Oltean authored
We assume that the mqprio queue configuration from taprio has a simple 1:1 mapping between prio and traffic class, and one TX queue per TC. That might not be the case. Actually parse and act upon the mqprio config. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
-
Vladimir Oltean authored
Regardless of the requested queue count per traffic class, the enetc driver allocates a number of TX rings equal to the number of TCs, and hardcodes a queue configuration of "1@0 1@1 ... 1@max-tc". Other configurations are silently ignored and treated the same. Improve that by allowing what the user requests to be actually fulfilled. This allows more than one TX ring per traffic class. For example: $ tc qdisc add dev eno0 root handle 1: mqprio num_tc 4 \ map 0 0 1 1 2 2 3 3 queues 2@0 2@2 2@4 2@6 [ 146.267648] fsl_enetc 0000:00:00.0 eno0: TX ring 0 prio 0 [ 146.273451] fsl_enetc 0000:00:00.0 eno0: TX ring 1 prio 0 [ 146.283280] fsl_enetc 0000:00:00.0 eno0: TX ring 2 prio 1 [ 146.293987] fsl_enetc 0000:00:00.0 eno0: TX ring 3 prio 1 [ 146.300467] fsl_enetc 0000:00:00.0 eno0: TX ring 4 prio 2 [ 146.306866] fsl_enetc 0000:00:00.0 eno0: TX ring 5 prio 2 [ 146.313261] fsl_enetc 0000:00:00.0 eno0: TX ring 6 prio 3 [ 146.319622] fsl_enetc 0000:00:00.0 eno0: TX ring 7 prio 3 $ tc qdisc del dev eno0 root [ 178.238418] fsl_enetc 0000:00:00.0 eno0: TX ring 0 prio 0 [ 178.244369] fsl_enetc 0000:00:00.0 eno0: TX ring 1 prio 0 [ 178.251486] fsl_enetc 0000:00:00.0 eno0: TX ring 2 prio 0 [ 178.258006] fsl_enetc 0000:00:00.0 eno0: TX ring 3 prio 0 [ 178.265038] fsl_enetc 0000:00:00.0 eno0: TX ring 4 prio 0 [ 178.271557] fsl_enetc 0000:00:00.0 eno0: TX ring 5 prio 0 [ 178.277910] fsl_enetc 0000:00:00.0 eno0: TX ring 6 prio 0 [ 178.284281] fsl_enetc 0000:00:00.0 eno0: TX ring 7 prio 0 $ tc qdisc add dev eno0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 1 [ 186.113162] fsl_enetc 0000:00:00.0 eno0: TX ring 0 prio 0 [ 186.118764] fsl_enetc 0000:00:00.0 eno0: TX ring 1 prio 1 [ 186.124374] fsl_enetc 0000:00:00.0 eno0: TX ring 2 prio 2 [ 186.130765] fsl_enetc 0000:00:00.0 eno0: TX ring 3 prio 3 [ 186.136404] fsl_enetc 0000:00:00.0 eno0: TX ring 4 prio 4 [ 186.142049] fsl_enetc 0000:00:00.0 eno0: TX ring 5 prio 5 [ 186.147674] fsl_enetc 0000:00:00.0 eno0: TX ring 6 prio 6 [ 186.153305] fsl_enetc 0000:00:00.0 eno0: TX ring 7 prio 7 The driver used to set TC_MQPRIO_HW_OFFLOAD_TCS, near which there is this comment in the UAPI header: TC_MQPRIO_HW_OFFLOAD_TCS, /* offload TCs, no queue counts */ which is what enetc was doing up until now (and no longer is; we offload queue counts too), remove that assignment. Signed-off-by: -
Vladimir Oltean authored
The enetc driver does not validate the mqprio queue configuration, so it currently allows things like this: $ tc qdisc add dev swp0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 3@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 1 But also things like this, completely omitting the queue configuration: $ tc qdisc add dev eno0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 hw 1 By requesting validation via the mqprio capability structure, this is no longer allowed, and we bring what is accepted by hardware in line with what is accepted by software. The check that num_tc <= real_num_tx_queues also becomes superfluous and can be dropped, because mqprio_validate_queue_counts() validates that no TXQ range exceeds real_num_tx_queues. That is a stronger check, because there is at least 1 TXQ per TC, so there are at least as many TXQs as TCs. Signed-off-by:
-
Vladimir Oltean authored
There are 2 classes of in-tree drivers currently: - those who act upon struct tc_taprio_sched_entry :: gate_mask as if it holds a bit mask of TXQs - those who act upon the gate_mask as if it holds a bit mask of TCs When it comes to the standard, IEEE 802.1Q-2018 does say this in the second paragraph of section 8.6.8.4 Enhancements for scheduled traffic: | A gate control list associated with each Port contains an ordered list | of gate operations. Each gate operation changes the transmission gate | state for the gate associated with each of the Port's traffic class | queues and allows associated control operations to be scheduled. In typically obtuse language, it refers to a "traffic class queue" rather than a "traffic class" or a "queue". But careful reading of 802.1Q clarifies that "traffic class" and "queue" are in fact synonymous (see 8.6.6 Queuing frames): | A queue in this context is not necessarily a single FIFO data structure. | A queue is a record of all frames of a given traffic class awaiting | transmission on a given Bridge Port. The structure of this record is not | specified. i.o.w. their definition of "queue" isn't the Linux TX queue. The gate_mask really is input into taprio via its UAPI as a mask of traffic classes, but taprio_sched_to_offload() converts it into a TXQ mask. The breakdown of drivers which handle TC_SETUP_QDISC_TAPRIO is: - hellcreek, felix, sja1105: these are DSA switches, it's not even very clear what TXQs correspond to, other than purely software constructs. Only the mqprio configuration with 8 TCs and 1 TXQ per TC makes sense. So it's fine to convert these to a gate mask per TC. - enetc: I have the hardware and can confirm that the gate mask is per TC, and affects all TXQs (BD rings) configured for that priority. - igc: in igc_save_qbv_schedule(), the gate_mask is clearly interpreted to be per-TXQ. - tsnep: Gerhard Engleder clarifies that even though this hardware supports at most 1 TXQ per TC, the TXQ indices may be different from the TC values themselves, and it is the TXQ indices that matter to this hardware. So keep it per-TXQ as well. - stmmac: I have a GMAC datasheet, and in the EST section it does specify that the gate events are per TXQ rather than per TC. - lan966x: again, this is a switch, and while not a DSA one, the way in which it implements lan966x_mqprio_add() - by only allowing num_tc == NUM_PRIO_QUEUES (8) - makes it clear to me that TXQs are a purely software construct here as well. They seem to map 1:1 with TCs. - am65_cpsw: from looking at am65_cpsw_est_set_sched_cmds(), I get the impression that the fetch_allow variable is treated like a prio_mask. This definitely sounds closer to a per-TC gate mask rather than a per-TXQ one, and TI documentation does seem to recomment an identity mapping between TCs and TXQs. However, Roger Quadros would like to do some testing before making changes, so I'm leaving this driver to operate as it did before, for now. Link with more details at the end. Based on this breakdown, we have 5 drivers with a gate mask per TC and 4 with a gate mask per TXQ. So let's make the gate mask per TXQ the opt-in and the gate mask per TC the default. Benefit from the TC_QUERY_CAPS feature that Jakub suggested we add, and query the device driver before calling the proper ndo_setup_tc(), and figure out if it expects one or the other format. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230202003621.2679603-15-vladimir.oltean@nxp.com/#25193204 Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Siddharth Vadapalli <s-vadapalli@ti.com> Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by:
-
Vladimir Oltean authored
The taprio qdisc does not currently pass the mqprio queue configuration down to the offloading device driver. So the driver cannot act upon the TXQ counts/offsets per TC, or upon the prio->tc map. It was probably assumed that the driver only wants to offload num_tc (see TC_MQPRIO_HW_OFFLOAD_TCS), which it can get from netdev_get_num_tc(), but there's clearly more to the mqprio configuration than that. I've considered 2 mechanisms to remedy that. First is to pass a struct tc_mqprio_qopt_offload as part of the tc_taprio_qopt_offload. The second is to make taprio actually call TC_SETUP_QDISC_MQPRIO, *in addition to* TC_SETUP_QDISC_TAPRIO. The difference is that in the first case, existing drivers (offloading or not) all ignore taprio's mqprio portion currently, whereas in the second case, we could control whether to call TC_SETUP_QDISC_MQPRIO, based on a new capability. The question is which approach would be better. I'm afraid that calling TC_SETUP_QDISC_MQPRIO unconditionally (not based on a taprio capability bit) would risk introducing regressions. For example, taprio doesn't populate (or validate) qopt->hw, as well as mqprio.flags, mqprio.shaper, mqprio.min_rate, mqprio.max_rate. In comparison, adding a capability is functionally equivalent to just passing the mqprio in a way that drivers can ignore it, except it's slightly more complicated to use it (need to set the capability). Ultimately, what made me go for the "mqprio in taprio" variant was that it's easier for offloading drivers to interpret the mqprio qopt slightly differently when it comes from taprio vs when it comes from mqprio, should that ever become necessary. Signed-off-by:
-
Vladimir Oltean authored
The taprio qdisc will need to reconstruct a struct tc_mqprio_qopt from netdev settings once more in a future patch, but this code was already written twice, once in taprio and once in mqprio. Refactor the code to a helper in the common mqprio library. Signed-off-by:
-
Vladimir Oltean authored
There is a lot of code in taprio which is "borrowed" from mqprio. It makes sense to put a stop to the "borrowing" and start actually reusing code. Because taprio and mqprio are built as part of different kernel modules, code reuse can only take place either by writing it as static inline (limiting), putting it in sch_generic.o (not generic enough), or creating a third auto-selectable kernel module which only holds library code. I opted for the third variant. In a previous change, mqprio gained support for reverse TC:TXQ mappings, something which taprio still denies. Make taprio use the same validation logic so that it supports this configuration as well. The taprio code didn't enforce TXQ overlaps in txtime-assist mode and that looks intentional, even if I've no idea why that might be. Preserve that, but add a comment. There isn't any dedicated MAINTAINERS entry for mqprio, so nothing to update there. Signed-off-by:
-
Vladimir Oltean authored
To make mqprio more user-friendly, create netlink extended ack messages which say exactly what is wrong about the queue counts. This uses the new support for printf-formatted extack messages. Example: $ tc qdisc add dev eno0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 3@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 Error: sch_mqprio: TC 0 queues 3@0 overlap with TC 1 queues 1@1. Signed-off-by:
-
Vladimir Oltean authored
mqprio_parse_opt() proudly has a comment: /* If hardware offload is requested we will leave it to the device * to either populate the queue counts itself or to validate the * provided queue counts. */ Unfortunately some device drivers did not get this memo, and don't validate the queue counts, or populate them. In case drivers don't want to populate the queue counts themselves, just act upon the requested configuration, it makes sense to introduce a tc capability, and make mqprio query it, so they don't have to do the validation themselves. Signed-off-by:
-
Vladimir Oltean authored
By imposing that the last TXQ of TC i is smaller than the first TXQ of any TC j (j := i+1 .. n), mqprio imposes a strict ordering condition for the TXQ indices (they must increase as TCs increase). Claudiu points out that the complexity of the TXQ count validation is too high for this logic, i.e. instead of iterating over j, it is sufficient that the TXQ indices of TC i and i + 1 are ordered, and that will eventually ensure global ordering. This is true, however it doesn't appear to me that is what the code really intended to do. Instead, based on the comments, it just wanted to check for overlaps (and this isn't how one does that). So the following mqprio configuration, which I had recommended to Vinicius more than once for igb/igc (to account for the fact that on this hardware, lower numbered TXQs have higher dequeue priority than higher ones): num_tc 4 map 0 1 2 3 queues 1@3 1@2 1@1 1@0 is in fact denied today by mqprio. The full story is that in fact, it's only denied with "hw 0"; if hardware offloading is requested, mqprio defers TXQ range overlap validation to the device driver (a strange decision in itself). This is most certainly a bug, but it's not one that has any merit for being fixed on "stable" as far as I can tell. This is because mqprio always rejected a configuration which was in fact valid, and this has shaped the way in which mqprio configuration scripts got built for various hardware (see igb/igc in the link below). Therefore, one could consider it to be merely an improvement for mqprio to allow reverse TC:TXQ mappings. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230130173145.475943-9-vladimir.oltean@nxp.com/#25188310 Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230128010719.2182346-6-vladimir.oltean@nxp.com/#25186442Signed-off-by:
-
Vladimir Oltean authored
Since mqprio is a scheduler and not a classifier, move its offload structure to pkt_sched.h, where struct tc_taprio_qopt_offload also lies. Also update some header inclusions in drivers that access this structure, to the best of my abilities. Cc: Igor Russkikh <irusskikh@marvell.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: Daniel Machon <daniel.machon@microchip.com> Cc: UNGLinuxDriver@microchip.com Signed-off-by:
-
Vladimir Oltean authored
Some more logic will be added to mqprio offloading, so split that code up from mqprio_init(), which is already large, and create a new function, mqprio_enable_offload(), similar to taprio_enable_offload(). Also create the opposite function mqprio_disable_offload(). Signed-off-by:
-
Vladimir Oltean authored
mqprio_init() is quite large and unwieldy to add more code to. Split the netlink attribute parsing to a dedicated function. Signed-off-by:
-
Praveen Kaligineedi authored
IRQs are currently requested before the netdevice is registered and a proper name is assigned to the device. Changing interrupt name to avoid using the format string in the name. Interrupt name before change: eth%d-ntfy-block.<blk_id> Interrupt name after change: gve-ntfy-blk<blk_id>@pci:<pci_name> Signed-off-by:
Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by:
Jeroen de Borst <jeroendb@google.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== net: implement devlink reload in ice Michal Swiatkowski says: This is a part of changes done in patchset [0]. Resource management is kind of controversial part, so I split it into two patchsets. It is the first one, covering refactor and implement reload API call. The refactor will unblock some of the patches needed by SIOV or subfunction. Most of this patchset is about implementing driver reload mechanism. Part of code from probe and rebuild is used to not duplicate code. To allow this reuse probe and rebuild path are split into smaller functions. Patch "ice: split ice_vsi_setup into smaller functions" changes boolean variable in function call to integer and adds define for it. Instead of having the function called with true/false now it can be called with readable defines ICE_VSI_FLAG_INIT or ICE_VSI_FLAG_NO_INIT. It was suggested by Jacob Keller and probably this mechanism will be implemented across ice driver in follow up patchset. Previously the code was reviewed here [0]. [0] https://lore.kernel.org/netdev/Y3ckRWtAtZU1BdXm@unreal/T/#m3bb8feba0a62f9b4cd54cd94917b7e2143fc2ecd ==================== Signed-off-by:
-
Jesper Dangaard Brouer authored
First user of skb_poison_list is in kfree_skb_list_reason, to catch bugs earlier like introduced in commit eedade12 ("net: kfree_skb_list use kmem_cache_free_bulk"). For completeness mentioned bug have been fixed in commit f72ff8b8 ("net: fix kfree_skb_list use of skb_mark_not_on_list"). In case of a bug like mentioned commit we would have seen OOPS with: general protection fault, probably for non-canonical address 0xdead000000000870 And content of one the registers e.g. R13: dead000000000800 In this case skb->len is at offset 112 bytes (0x70) why fault happens at 0x800+0x70 = 0x870 Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
David S. Miller authored
Jiawen Wu says: ==================== Wangxun interrupt and RxTx support Configure interrupt, setup RxTx ring, support to receive and transmit packets. change log: v3: - Use upper_32_bits() to avoid compile warning. - Remove useless codes. v2: - Andrew Lunn: https://lore.kernel.org/netdev/Y86kDphvyHj21IxK@lunn.ch/ - Add a judgment when allocate dma for descriptor. ==================== Signed-off-by:
-
Mengyuan Lou authored
Add enable and disable operation process for ngbe open/close. Clean Rx and Tx ring interrupts, process packets in the data path. Signed-off-by:
Mengyuan Lou <mengyuanlou@net-swift.com> Signed-off-by:
-
Jiawen Wu authored
Clean Rx and Tx ring interrupts, process packets in the data path. Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by:
-
Mengyuan Lou authored
Support to transmit packets without hardware features. Signed-off-by:
-
Jiawen Wu authored
Clean all queues associated with a q_vector, to simple receive packets without hardware features. Signed-off-by:
-
Jiawen Wu authored
Improve the configuration of Rx and Tx ring, set Rx flags and implement ndo_set_rx_mode ops. Signed-off-by:
-
Jiawen Wu authored
Setup Rx and Tx descriptors for specefic rings. Signed-off-by:
-
Jiawen Wu authored
Configure hardware for preparing to process packets. Including configure receive and transmit unit of the MAC layer, and setup the specific rings. Signed-off-by:
-
Jiawen Wu authored
Determine proper interrupt scheme to enable and handle interrupt. Signed-off-by:
-
Mengyuan Lou authored
Add request_irq for tx/rx rings and misc other events. If the application is successful, config vertors for interrupts. Enable some base interrupts mask in ngbe_irq_enable. Signed-off-by:
-
Mengyuan Lou authored
Add irq flow functions for ngbe and txgbe. Alloc pcie msix irqs for drivers, otherwise fall back to msi/legacy. Signed-off-by:
-
Qingfang DENG authored
We use BH context only for synchronization, so we don't care if it's actually serving softirq or not. As a side node, in case of threaded NAPI, in_serving_softirq() will return false because it's in process context with BH off, making page_pool_recycle_in_cache() unreachable. Signed-off-by:
Qingfang DENG <qingfang.deng@siflower.com.cn> Tested-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2023-02-04 This series provides misc updates to mlx5 driver: 1) Trivial LAG code cleanup patches from Roi 2) Rahul improves mlx5's documentation structure Separates the documentation into multiple pages related to different components in the device driver. Adds Kconfig parameters, devlink parameters, and tracepoints that were previously introduced but not added to the documentation. Introduces a new page on ethtool statistics counters with information about counters previously implemented in the mlx5_core driver but not documented in the kernel tree. 3) From Raed, policy/state selector support for IPSec. 4) From Fragos, add support for XDR speed in IPoIB mlx5 netdev 5) Few more misc cleanups and trivial changes ==================== Signed-off-by: -
Parav Pandit authored
To easily audit the code, better to keep the device stop() sequence to be mirror of the device open() sequence. Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== bridge: Limit number of MDB entries per port, port-vlan The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. Per-port number of entries keeps track of the total number of MDB entries configured on a given port. The per-port-VLAN value then keeps track of the subset of MDB entries configured specifically for the given VLAN, on that port. The number is adjusted as port_groups are created and deleted, and therefore under multicast lock. A maximum value, if non-zero, then places a limit on the number of entries that can be configured in a given context. Attempts to add entries above the maximum are rejected. Rejection reason of netlink-based requests to add MDB entries is communicated through extack. This channel is unavailable for rejections triggered from the control path. To address this lack of visibility, the patchset adds a tracepoint, bridge:br_mdb_full: # perf record -e bridge:br_mdb_full & # [...] # perf script | cut -d: -f4- dev v2 af 2 src ::ffff:0.0.0.0 grp ::ffff:239.1.1.112/00:00:00:00:00:00 vid 0 dev v2 af 10 src :: grp ff0e::112/00:00:00:00:00:00 vid 0 dev v2 af 2 src ::ffff:0.0.0.0 grp ::ffff:239.1.1.112/00:00:00:00:00:00 vid 10 dev v2 af 10 src 2001:db8:1::1 grp ff0e::1/00:00:00:00:00:00 vid 10 dev v2 af 2 src ::ffff:192.0.2.1 grp ::ffff:239.1.1.1/00:00:00:00:00:00 vid 10 Another option to consume the tracepoint is e.g. through the bpftrace tool: # bpftrace -e ' tracepoint:bridge:br_mdb_full /args->af != 0/ { printf("dev %s src %s grp %s vid %u\n", str(args->dev), ntop(args->src), ntop(args->grp), args->vid); } tracepoint:bridge:br_mdb_full /args->af == 0/ { printf("dev %s grp %s vid %u\n", str(args->dev), macaddr(args->grpmac), args->vid); }' This tracepoint is triggered for mcast_hash_max exhaustions as well. The following is an example of how the feature is used. A more extensive example is available in patch #8: # bridge vlan set dev v1 vid 1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1 # bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1 Error: bridge: Port-VLAN is already in 1 groups, and mcast_max_groups=1. The patchset progresses as follows: - In patch #1, set strict_start_type at two bridge-related policies. The reason is we are adding a new attribute to one of these, and want the new attribute to be parsed strictly. The other was adjusted for completeness' sake. - In patches #2 to #5, br_mdb and br_multicast code is adjusted to make the following additions smoother. - In patch #6, add the tracepoint. - In patch #7, the code to maintain number of MDB entries is added as struct net_bridge_mcast_port::mdb_n_entries. The maximum is added, too, as struct net_bridge_mcast_port::mdb_max_entries, however at this point there is no way to set the value yet, and since 0 is treated as "no limit", the functionality doesn't change at this point. Note however, that mcast_hash_max violations already do trigger at this point. - In patch #8, netlink plumbing is added: reading of number of entries, and reading and writing of maximum. The per-port values are passed through RTM_NEWLINK / RTM_GETLINK messages in IFLA_BRPORT_MCAST_N_GROUPS and _MAX_GROUPS, inside IFLA_PROTINFO nest. The per-port-vlan values are passed through RTM_GETVLAN / RTM_NEWVLAN messages in BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, _MAX_GROUPS, inside BRIDGE_VLANDB_ENTRY. The following patches deal with the selftest: - Patches #9 and #10 clean up and move around some selftest code. - Patches #11 to #14 add helpers and generalize the existing IGMP / MLD support to allow generating packets with configurable group addresses and varying source lists for (S,G) memberships. - Patch #15 adds code to generate IGMP leave and MLD done packets. - Patch #16 finally adds the selftest itself. v3: - Patch #7: - Access mdb_max_/_n_entries through READ_/WRITE_ONCE - Move extack setting to br_multicast_port_ngroups_inc_one(). Since we use NL_SET_ERR_MSG_FMT_MOD, the correct context (port / port-vlan) can be passed through an argument. This also removes the need for more READ/WRITE_ONCE's at the extack-setting site. - Patch #8: - Move the br_multicast_port_ctx_vlan_disabled() check out to the _vlan_ helpers callers. Thus these helpers cannot fail, which makes them very similar to the _port_ helpers. Have them take the MC context directly and unify them. v2: - Cover letter: - Add an example of a bpftrace-based probe script - Patch #6: - Report IPv4 as an IPv6-mapped address through the IPv6 buffer as well, to save ring buffer space. - Patch #7: - In br_multicast_port_ngroups_inc_one(), bounce if n>=max, not if n==max - Adjust extack messages to mention ngroups, now that the bounces appear when n>=max, not n==max - In __br_multicast_enable_port_ctx(), do not reset max to 0. Also do not count number of entries by going through _inc, as that would end up incorrectly bouncing the entries. - Patch #8: - Drop locks around accesses in br_multicast_{port,vlan}_ngroups_{get,set_max}(), - Drop bounces due to max<n in br_multicast_{port,vlan}_ngroups_set_max(). - Patch #12: - In the comment at payload_template_calc_checksum(), s/%#02x/%02x/, that's the mausezahn payload format. - Patch #16: - Adjust the tests that check setting max below n and reset of max on VLAN snooping enablement - Make test naming uniform - Enable testing of control path (IGMP/MLD) in mcast_vlan_snooping bridge - Reorganize the code so that test instances (per bridge type and configuration type) always come right after the test, in order of {d,q,qvs}{4,6}{cfg,ctl}. Then groups of selftests are at the end of the file. Similarly adjust invocation order of the tests. ==================== Signed-off-by:
-
