This reverts commit 339f8361.

It has been found to cause problems in a number of Chromebook devices,
so revert the change until it can be brought back in a safe way.

Link: https://lore.kernel.org/r/385a3519-b45d-48c5-a6fd-a3fdb6bec92f@chromium.orgReported-by: : Aleksander Morgado <aleksandermj@chromium.org>
Fixes: 339f8361 ("usb: cdc-wdm: close race between read and workqueue")
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fixes for v6.9-rc5

This includes following USB4/Thunderbolt fixes for v6.9-rc5:

  - Avoid creating DisplayPort tunnels for the adapters on the same router
  - Correct wake configurations after device router unplug
  - Fix immediate wake when "wakeup_count" is used to enter system sleep.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Avoid notify PM core about runtime PM resume
  thunderbolt: Fix wake configurations after device unplug
  thunderbolt: Do not create DisplayPort tunnels on adapters of the same router

In case regulator_bulk_enable() fails, the previously enabled USB hub
clock should be disabled.

Fix it accordingly.

Fixes: 65e62b8a ("usb: misc: onboard_usb_hub: Add support for clock input")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20240409162910.2061640-1-festevam@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently we notify PM core about occurred wakes after any resume. This
is not actually needed after resume from runtime suspend. Hence, notify
PM core about occurred wakes only after resume from system sleep. Also,
if the wake occurred in USB4 router upstream port, we don't notify the
PM core about it since it is not actually needed and can cause
unexpected autowake (e.g. if /sys/power/wakeup_count is used).

While there add the missing kernel-doc for tb_switch_resume().
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Currently we don't configure correctly the wake events after unplug of device
router. What can happen is that the downstream ports of host router will be
configured to wake on: USB4-wake and wake-on-disconnect, but not on
wake-on-connect. This may cause the later plugged device not to wake the
domain and fail in enumeration. Fix this by clearing downstream port's "USB4
Port is Configured" bit, after unplug of a device router.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Fixed variable dereference issue in DDMA completion flow.

Fixes: b258e426 ("usb: dwc2: host: Fix ISOC flow in DDMA mode")
CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ChipID bytes are read in inverse order: invert the ChipID value
defined as IT5205FN_CHIP_ID and used for validating the same.

Fixes: 41fe9ea1 ("usb: typec: mux: Add ITE IT5205 Alternate Mode Passive MUX driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240409113646.305105-1-angelogioacchino.delregno@collabora.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When sending a patch to (among others) Li Yang the nxp MTA replied that
the address doesn't exist and so the mail couldn't be delivered. The
error code was 550, so at least technically that's not a temporal issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240405072042.697182-2-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsl_ep_queue() is only called by usb_ep_queue() (as ep->ops->queue()).
So _ep isn't NULL.

As ep->ops->queue = fsl_ep_queue, the ep was initialized by
struct_ep_setup() and so ep->udc isn't NULL either.

Drop the check for _ep being NULL and assign udc earlier to prevent
following an uninitialized pointer in the two dev_vdbg()s in lines 878
and 882. This fixes a compiler warning when using clang and
CONFIG_USB_GADGET_VERBOSE=y.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404050227.TTvcCPBu-lkp@intel.com/
Fixes: 6025f20f ("usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240405055812.694123-2-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SanDisks USB3 storage may disapper after system reboot:

usb usb2-port3: link state change
xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
usb usb2-port3: do warm reset, port only
xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0
usb usb2-port3: not warm reset yet, waiting 50ms
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0
usb usb2-port3: not warm reset yet, waiting 200ms
...
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0
usb usb2-port3: not warm reset yet, waiting 200ms
xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0
xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0
xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0
usb usb2-port3: not enabled, trying warm reset again...

This is due to the USB device still cause port change event after xHCI is
shuted down:

xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001
xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling.
xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling
xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling
xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0
xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling.
xhci_hcd 0000:38:00.0: // Halt the HC
xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1
xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling.
xhci_hcd 0000:00:14.0: // Halt the HC
xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203
xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status  = 0x1311
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203
xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203
xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203
xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203
xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203
usb 2-3: device not accepting address 2, error -108
xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command
xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263
xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status  = 0x1271
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1
usb usb2-port3: not reset yet, waiting 60ms
ACPI: PM: Preparing to enter system sleep state S5
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1
usb usb2-port3: not reset yet, waiting 200ms
reboot: Restarting system

The port change event is caused by LPM transition, so disabling LPM at shutdown
to make sure the device is in U0 for warmboot.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240305065140.66801-1-kai.heng.feng@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When ncm function is working and then stop usb0 interface for link down,
eth_stop() is called. At this piont, accidentally if usb transport error
should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.

After that, ncm_disable() is called to disable for ncm unbind
but gether_disconnect() is never called since 'in_ep' is not enabled.

As the result, ncm object is released in ncm unbind
but 'dev->port_usb' associated to 'ncm->port' is not NULL.

And when ncm bind again to recover netdev, ncm object is reallocated
but usb0 interface is already associated to previous released ncm object.

Therefore, once usb0 interface is up and eth_start_xmit() is called,
released ncm object is dereferrenced and it might cause use-after-free memory.

[function unlink via configfs]
  usb0: eth_stop dev->port_usb=ffffff9b179c3200
  --> error happens in usb_ep_enable().
  NCM: ncm_disable: ncm=ffffff9b179c3200
  --> no gether_disconnect() since ncm->port.in_ep->enabled is false.
  NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200
  NCM: ncm_free: ncm free ncm=ffffff9b179c3200   <-- released ncm

[function link via configfs]
  NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000
  NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000
  NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0
  usb0: eth_open dev->port_usb=ffffff9b179c3200  <-- previous released ncm
  usb0: eth_start dev->port_usb=ffffff9b179c3200 <--
  eth_start_xmit()
  --> dev->wrap()
  Unable to handle kernel paging request at virtual address dead00000000014f

This patch addresses the issue by checking if 'ncm->netdev' is not NULL at
ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'.
It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect
rather than check 'ncm->port.in_ep->enabled' since it might not be enabled
but the gether connection might be established.
Signed-off-by: Norihiko Hama <Norihiko.Hama@alpsalpine.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240327023550.51214-1-Norihiko.Hama@alpsalpine.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are
incorrectly added one. The index of the loop is equal to the number of
PDOs to be updated when leaving the loop and it doesn't need to be added
one.

When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as
the size of the local sink PDO array to match the Source capabilities
of the partner port. If the off-by-one overflow occurs, a wrong RDO
might be sent and unexpected power transfer might happen such as over
voltage or over current (than expected).

"nr_src_pdo" is used to set the Rp level when the port is in Source
role. It is also the array size of the local Source capabilities when
filling up the buffer which will be sent as the Source PDOs (such as
in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp
level might be set and wrong Source PDOs will be sent to the partner
port. This could potentially cause over current or port resets.

Fixes: cd099cde ("usb: typec: tcpm: Support multiple capabilities")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240404133517.2707955-1-kyletso@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of bailing when fences have already been installed on the
DMABUF, wait for them (with a timeout) when doing a blocking operation.

This fixes the issue where userspace would submit a DMABUF with fences
already installed, with the (correct) expectation that it would just
work.

Fixes: 7b07a2a7 ("usb: gadget: functionfs: Add DMABUF import interface")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20240402110951.16376-3-paul@crapouillou.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A "read" fence was installed when the DMABUF was to be written to,
and a "write" fence was installed when the DMABUF was to be read from.

Besides, dma_resv_usage_rw() should only be used when waiting for
fences.

Fixes: 7b07a2a7 ("usb: gadget: functionfs: Add DMABUF import interface")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20240402110951.16376-2-paul@crapouillou.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix issues when initially checking for a connector change:
- Use the correct connector number not the entire CCI.
- Call ->read under the PPM lock.
- Remove a bogus READ_ONCE.

Fixes: 808a8b9e ("usb: typec: ucsi: Check for notifications after init")
Cc: stable@kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Emails to the only maintainer bounce:

  <ran.wang_1@nxp.com>: host nxp-com.mail.protection.outlook.com[52.101.68.39]
  said: 550 5.4.1 Recipient address rejected: Access denied.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240327175308.520317-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pointer from a xhci usb virt device to its root hub port
(vdev->rhub_port) is set later when device is addressed, not while
vdev is allocated.

Tracepoints dereferenced this rhub_port pointer when freeing the virt
device, which causes null pointer dereference if tracing is enabled
and device is freed before addressed.

This can happen if tracing is enabled and xhci driver is unloaded before
a device is fully enumerated, or initial enumeration fails and device
is reset and freed before retry.

Don't dereference the rhub_port or show port numbers when tracing
xhci_free_virt_device(). This info is not very useful anyway.

Print the more useful slot id instead

Fixes: 06790c19 ("xhci: replace real & fake port with pointer to root hub port")
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Closes: https://lore.kernel.org/linux-usb/20240402005007.klv2ij727fkz7rpd@synopsys.com/Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240404121106.2842417-3-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If we get STS_HCE we give up on the interrupt, but for the purpose
of IRQ handling that still counts as ours. We may return IRQ_NONE
only if we are positive that it wasn't ours. Hence correct the default.

Fixes: 2a25e66d ("xhci: print warning when HCE was set")
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240404121106.2842417-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Probably due to a firmware bug Dell TB16 dock announces that one of its
DisplayPort adapters is actually DP IN. Now this is possible and used
with some external GPUs but not likely in this case as we are dealing
with a dock. Anyways the problem is that the driver tries to create a
DisplayPort tunnel between adapters of the same router which then shows
to user that there is no picture on the display (because there are no
available DP OUT adapters on the dock anymore).

Fix this by not creating DisplayPort tunnels between adapters that are
on the same router.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10265
Fixes: 274baf69 ("thunderbolt: Add DP IN added last in the head of the list of DP resources")
Cc: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Deduplicate Kconfig entries for CONFIG_CXL_PMU

 - Fix unselectable choice entry in MIPS Kconfig, and forbid this
   structure

 - Remove unused include/asm-generic/export.h

 - Fix a NULL pointer dereference bug in modpost

 - Enable -Woverride-init warning consistently with W=1

 - Drop KCSAN flags from *.mod.c files

* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: Fix typo HEIGTH to HEIGHT
  Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
  kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
  kbuild: make -Woverride-init warnings more consistent
  modpost: do not make find_tosym() return NULL
  export.h: remove include/asm-generic/export.h
  kconfig: do not reparent the menu inside a choice block
  MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
  cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig

Pull EDAC fixes from Borislav Petkov:

 - Fix more issues in the AMD FMPM driver

* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  RAS: Avoid build errors when CONFIG_DEBUG_FS=n
  RAS/AMD/FMPM: Safely handle saved records of various sizes
  RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()

Pull irq fixes from Borislav Petkov:

 - Fix an unused function warning on irqchip/irq-armada-370-xp

 - Fix the IRQ sharing with pinctrl-amd and ACPI OSL

* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/armada-370-xp: Suppress unused-function warning
  genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd

Pull x86 perf fixes from Borislav Petkov:

 - Define the correct set of default hw events on AMD Zen4

 - Use the correct stalled cycles PMCs on AMD Zen2 and newer

 - Fix detection of the LBR freeze feature on AMD

* tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later
  perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later
  perf/x86/amd/lbr: Use freeze based on availability
  x86/cpufeatures: Add new word for scattered features

Pull timers update from Borislav Petkov:

 - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that
   tglx can relax more :-P

* tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add co-maintainers for time[rs]

Pull objtool fix from Borislav Petkov:

 - Fix a format specifier build error in objtool during an x32 build

* tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix compile failure when using the x32 compiler

Pull x86 fixes from Borislav Petkov:

 - Make sure single object builds in arch/x86/virt/ ala
      make ... arch/x86/virt/vmx/tdx/seamcall.o
   work again

 - Do not do ROM range scans and memory validation when the kernel is
   running as a SEV-SNP guest as those can get problematic and, before
   that, are not really needed in such a guest

 - Exclude the build-time generated vdso-image-x32.o object from objtool
   validation and in particular the return sites in there due to a
   warning which fires when an unpatched return thunk is being used

 - Improve the NMI CPUs stall message to show additional information
   about the state of each CPU wrt the NMI handler

 - Enable gcc named address spaces support only on !KCSAN configs due to
   compiler options incompatibility

 - Revert a change which was trying to use GB pages for mapping regions
   only when the regions would be large enough but that change lead to
   kexec failing

 - A documentation fixlet

* tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use obj-y to descend into arch/x86/virt/
  x86/sev: Skip ROM range scans and validation for SEV-SNP guests
  x86/vdso: Fix rethunk patching for vdso-image-x32.o too
  x86/nmi: Upgrade NMI backtrace stall checks & messages
  x86/percpu: Disable named address spaces for KCSAN
  Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped."
  Documentation/x86: Fix title underline length

Fixed a typo in some variables where height was misspelled as heigth.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As of the first s390 pull request during the 6.9 merge window,
commit 691632f0 ("Merge tag 's390-6.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be
built with LLVM=1 when using LLVM 18.1.0, which is the first version
that has SystemZ support implemented in ld.lld and llvm-objcopy.

Update the supported architectures table in the Kbuild LLVM
documentation to note this explicitly to make it more discoverable by
users and other developers. Additionally, this brings s390 in line with
the rest of the architectures in the table, which all support LLVM=1.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When KCSAN and CONSTRUCTORS are enabled, one can trigger the

  "Unpatched return thunk in use. This should not happen!"

catch-all warning.

Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.

KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:

  -------------------
  Disassembly of section .text.startup:

  ...

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:

  -------------------
  Disassembly of section .text.startup:

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <_sub_I_00099_0+0xe>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4

  ...

  0000000000000030 <_sub_I_00099_0>:
    30:   f3 0f 1e fa             endbr64
    34:   e8 00 00 00 00          call   39 <_sub_I_00099_0+0x9>
                          35: R_X86_64_PLT32      __tsan_init-0x4
    39:   e9 00 00 00 00          jmp    3e <__ksymtab_cryptd_alloc_ahash+0x2>
                          3a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

in the .ko file.

Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.

Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.

Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.deSigned-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.

Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.

There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.

Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.

Fixes: 2cd3271b ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.

	In file included from check.c:16:
	check.c: In function ‘add_dead_ends’:
	/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
	   46 |                 "%s: warning: objtool: " format "\n",   \
	      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
	check.c:613:33: note: in expansion of macro ‘WARN’
	  613 |                                 WARN("can't find unreachable insn at %s+0x%" PRIx64,
	      |                                 ^~~~
	...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org

Pull xfs fixes from Chandan Babu:

 - Allow stripe unit/width value passed via mount option to be written
   over existing values in the super block

 - Do not set current->journal_info to avoid its value from being miused
   by another filesystem context

* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't use current->journal_info
  xfs: allow sunit mount option to repair bad primary sb stripe values

Pull SCSI fixes and updates from James Bottomley:
 "Fully half this pull is updates to lpfc and qla2xxx which got
  committed just as the merge window opened. A sizeable fraction of the
  driver updates are simple bug fixes (and lock reworks for bug fixes in
  the case of lpfc), so rather than splitting the few actual
  enhancements out, we're just adding the drivers to the -rc1 pull.

  The enhancements for lpfc are log message removals, copyright updates
  and three patches redefining types. For qla2xxx it's just removing a
  debug message on module removal and the manufacturer detail update.

  The two major fixes are the sg teardown race and a core error leg
  problem with the procfs directory not being removed if we destroy a
  created host that never got to the running state. The rest are minor
  fixes and constifications"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
  scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
  scsi: core: Fix unremoved procfs host directory regression
  scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
  scsi: sd: Fix TCG OPAL unlock on system resume
  scsi: sg: Avoid sg device teardown race
  scsi: lpfc: Copyright updates for 14.4.0.1 patches
  scsi: lpfc: Update lpfc version to 14.4.0.1
  scsi: lpfc: Define types in a union for generic void *context3 ptr
  scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
  scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
  scsi: lpfc: Use a dedicated lock for ras_fwlog state
  scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
  scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
  scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
  scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
  scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
  scsi: lpfc: Remove unnecessary log message in queuecommand path
  scsi: qla2xxx: Update version to 10.02.09.200-k
  scsi: qla2xxx: Delay I/O Abort on PCI error
  scsi: qla2xxx: Change debug message during driver unload
  ...

Pull i2c fix from Wolfram Sang:
 "A fix from Andi for I2C host drivers"

* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1

Pull USB fixes from Greg KH:
 "Here are a bunch of small USB fixes for reported problems and
  regressions for 6.9-rc2. Included in here are:

   - deadlock fixes for long-suffering issues

   - USB phy driver revert for reported problem

   - typec fixes for reported problems

   - duplicate id in dwc3 dropped

   - dwc2 driver fixes

   - udc driver warning fix

   - cdc-wdm race bugfix

   - other tiny USB bugfixes

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: core: Fix deadlock in port "disable" sysfs attribute
  USB: core: Add hub_get() and hub_put() routines
  usb: typec: ucsi: Check capabilities before cable and identity discovery
  usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
  usb: typec: ucsi_acpi: Refactor and fix DELL quirk
  usb: typec: ucsi: Ack unsupported commands
  usb: typec: ucsi: Check for notifications after init
  usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
  usb: typec: Return size of buffer if pd_set operation succeeds
  usb: udc: remove warning when queue disabled ep
  usb: dwc3: pci: Drop duplicate ID
  usb: dwc3: Properly set system wakeup
  Revert "usb: phy: generic: Get the vbus supply"
  usb: cdc-wdm: close race between read and workqueue
  usb: dwc2: gadget: LPM flow fix
  usb: dwc2: gadget: Fix exiting from clock gating
  usb: dwc2: host: Fix ISOC flow in DDMA mode
  usb: dwc2: host: Fix remote wakeup from hibernation
  usb: dwc2: host: Fix hibernation flow
  USB: core: Fix deadlock in usb_deauthorize_interface()
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for the vc04_services driver
  that resolve reported problems:

   - strncpy fix for information leak

   - another information leak discovered by the previous strncpy fix

  Both of these have been in linux-next all this past week with no
  reported issues"

* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vc04_services: fix information leak in create_component()
  staging: vc04_services: changen strncpy() to strscpy_pad()

Merge tag 'i2c-host-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

One fix in the i801 driver where a bug caused touchpad
malfunctions on some Lenovo P1 models by incorrectly overwriting
a status variable during successful SMBUS transactions.

Commit c33621b4 ("x86/virt/tdx: Wire up basic SEAMCALL functions")
introduced a new instance of core-y instead of the standardized obj-y
syntax.

X86 Makefiles descend into subdirectories of arch/x86/virt inconsistently;
into arch/x86/virt/ via core-y defined in arch/x86/Makefile, but into
arch/x86/virt/svm/ via obj-y defined in arch/x86/Kbuild.

This is problematic when you build a single object in parallel because
multiple threads attempt to build the same file.

  $ make -j$(nproc) arch/x86/virt/vmx/tdx/seamcall.o
    [ snip ]
    AS      arch/x86/virt/vmx/tdx/seamcall.o
    AS      arch/x86/virt/vmx/tdx/seamcall.o
  fixdep: error opening file: arch/x86/virt/vmx/tdx/.seamcall.o.d: No such file or directory
  make[4]: *** [scripts/Makefile.build:362: arch/x86/virt/vmx/tdx/seamcall.o] Error 2

Use the obj-y syntax, as it works correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240330060554.18524-1-masahiroy@kernel.org

Pull drm fixes from Dave Airlie:
 "Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and
  then mostly scattered around. rc3 might be quieter with the holidays
  but we shall see.

  bridge:
   - select DRM_KMS_HELPER

  dma-buf:
   - fix NULL-pointer deref

  dp:
   - fix div-by-zero in DP MST unplug code

  fbdev:
   - select FB_IOMEM_FOPS for SBus

  sched:
   - fix NULL-pointer deref

  xe:
   - Fix build on mips
   - Fix wrong bound checks
   - Fix use of msec rather than jiffies
   - Remove dead code

  amdgpu:
   - SMU 14.0.1 updates
   - DCN 3.5.x updates
   - VPE fix
   - eDP panel flickering fix
   - Suspend fix
   - PSR fix
   - DCN 3.0+ fix
   - VCN 4.0.6 updates
   - debugfs fix

  amdkfd:
   - DMA-Buf fix
   - GFX 9.4.2 TLB flush fix
   - CP interrupt fix

  i915:
   - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c
   - Update a MTL workaround
   - Fix locking inversion in hwmon's sysfs
   - Remove a bogus error message around PXP
   - Fix UAF on VMA
   - Reset queue_priority_hint on parking
   - Display Fixes:
   - Remove duplicated audio enable/disable on SDVO and DP
   - Disable AuxCCS for Xe driver
   - Revert init order of MIPI DSI
   - DRRS debugfs fix with an extra refactor patch
   - VRR related fixes
   - Fix a JSL eDP corruption
   - Fix the cursor physical dma address
   - BIOS VBT related fix

  nouveau:
   - dmem: handle kcalloc() allocation failures

  qxl:
   - remove unused variables

  rockchip:
   - vop2: remove support for AR30 and AB30 formats

  vmwgfx:
   - debugfs: create ttm_resource_manager entry only if needed"

* tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits)
  drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode()
  drm/i915: Pre-populate the cursor physical dma address
  drm/i915/gt: Reset queue_priority_hint on parking
  drm/i915/vma: Fix UAF on destroy against retire race
  drm/i915: Do not print 'pxp init failed with 0' when it succeed
  drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()
  drm/i915/hwmon: Fix locking inversion in sysfs getter
  drm/i915/dsb: Fix DSB vblank waits when using VRR
  drm/i915/vrr: Generate VRR "safe window" for DSB
  drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status
  drm/i915/drrs: Refactor CPU transcoder DRRS check
  drm/i915/mtl: Update workaround 14018575942
  drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly
  drm/i915/display: Disable AuxCCS framebuffers if built for Xe
  drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP
  drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c
  drm/qxl: remove unused variable from `qxl_process_single_command()`
  drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()`
  drm/i915: add bug.h include to i915_memcpy.c
  drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
  ...