Two bugfixes that came in to update the MAINTAINERS file
and fix an issue with USB on the uniphier platform.

* arm/fixes:
  arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
  ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
  MAINTAINERS: add ARM/APPLE MACHINE mailing list

Merge tag 'socfpga_updates_for_v5.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late

SoCFPGA dts updates for v5.20, part 2
- Update EMAC AXI settings for Cyclone5

* tag 'socfpga_updates_for_v5.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: add EMAC AXI settings for Cyclone5
  arm64: dts: altera: socfpga_stratix10: move clocks out of soc node
  arm64: dts: Add support for Stratix 10 Software Virtual Platform
  dt-bindings: altera: document Stratix 10 SWVP compatibles
  arm64: dts: altera: adjust whitespace around '='
  arm64: dts: intel: socfpga_agilex: use defined GIC interrupt type for ECC
  dt-bindings: altera: Add Chameleon v3 board
  ARM: dts: socfpga: Add Google Chameleon v3 devicetree
  ARM: dts: socfpga: Add atsha204a node to Mercury+ AA1 dts
  ARM: dts: socfpga: Move sdmmc-ecc node to Arria 10 dts
  ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi

Link: https://lore.kernel.org/r/20220728223237.3184243-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Apple SoC DT updates for 5.20.

This round just adds the NVMe controller nodes, since that driver is
finally upstream. Includes one related power domain fixup.

* tag 'asahi-soc-dt-5.20' of https://github.com/AsahiLinux/linux:
  arm64: dts: apple: t8103: Add ANS2 NVMe nodes
  arm64: dts: apple: Re-parent ANS2 power domains

Link: https://lore.kernel.org/r/6de8649c-9795-54a1-fa45-8dd50355061f@marcan.stSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Reset controller updates for v5.20

Allow reset-simple to be selected under EXPERT and reset-a10sr to be
built under COMPILE_TEST. Add Renesas RZ/G2UL USBPHY binding and a new
driver for the TI TPS380x line of voltage supervisor ICs with manual
reset control.

A patch to make reset-microchip-sparx5 buildable as a module had to be
reverted as that turned out to break MDIO on kswitch-d10.

* tag 'reset-for-v5.20' of git://git.pengutronix.de/pza/linux:
  reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
  reset: tps380x: Add TPS380x device driver supprt
  dt-bindings: reset: Add TPS380x documentation
  dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
  reset: reset-simple should depends on HAS_IOMEM
  Revert "reset: microchip-sparx5: allow building as a module"
  reset: a10sr: allow building under COMPILE_TEST
  reset: allow building of reset simple driver if expert config selected
  reset: microchip-sparx5: allow building as a module

Link: https://lore.kernel.org/r/20220729133620.488379-1-p.zabel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Apple SoC MAINTAINERS updates for 5.20.

Just one patch adding our shiny new mailing list to the relevant
section.

* tag 'asahi-soc-maintainers-5.20' of https://github.com/AsahiLinux/linux:
  MAINTAINERS: add ARM/APPLE MACHINE mailing list

Link: https://lore.kernel.org/r/308defdf-8873-63ed-dc9c-a88cd7a3cc2f@marcan.stSigned-off-by: Arnd Bergmann <arnd@arndb.de>

An interrupt for USB device are shared with USB host. Set interrupt-names
property to common "dwc_usb3" instead of "host" and "peripheral".

Cc: stable@vger.kernel.org
Fixes: d7b9beb8 ("arm64: dts: uniphier: Add USB3 controller nodes")
Reported-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

An interrupt for USB device are shared with USB host. Set interrupt-names
property to common "dwc_usb3" instead of "host" and "peripheral".

Cc: stable@vger.kernel.org
Fixes: 45be1573 ("ARM: dts: uniphier: Add USB3 controller nodes")
Reported-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull clk fix from Stephen Boyd:
 "One-liner fix of a NULL pointer deref in the Allwinner clk driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: Fix H6 RTC clock definition

Pull x86 fixes from Borislav Petkov:

 - Update the 'mitigations=' kernel param documentation

 - Check the IBPB feature flag before enabling IBPB in firmware calls
   because cloud vendors' fantasy when it comes to creating guest
   configurations is unlimited

 - Unexport sev_es_ghcb_hv_call() before 5.19 releases now that HyperV
   doesn't need it anymore

 - Remove dead CONFIG_* items

* tag 'x86_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed
  x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available
  Revert "x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV"
  x86/configs: Update configs in x86_debug.config

Pull locking fix from Borislav Petkov:

 - Avoid rwsem lockups in certain situations when handling the handoff
   bit

* tag 'locking_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by first waiter

Pull EDAC fixes from Borislav Petkov:

 - Relax the condition under which the DIMM label in ghes_edac is set in
   order to accomodate an HPE BIOS which sets only the device but not
   the bank

 - Two forgotten fixes to synopsys_edac when handling error interrupts

* tag 'edac_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ghes: Set the DIMM label unconditionally
  EDAC/synopsys: Re-enable the error interrupts on v3 hw
  EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hw

This allows using the internal disk attached via NVMe.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>

Pull ARM fixes from Russell King:
 "Last set of ARM fixes for 5.19:

   - fix for MAX_DMA_ADDRESS overflow

   - fix for find_*_bit performing an out of bounds memory access"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: findbit: fix overflowing offset
  ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow

With commit d257cc8c ("locking/rwsem: Make handoff bit handling more
consistent"), the writer that sets the handoff bit can be interrupted
out without clearing the bit if the wait queue isn't empty. This disables
reader and writer optimistic lock spinning and stealing.

Now if a non-first writer in the queue is somehow woken up or a new
waiter enters the slowpath, it can't acquire the lock.  This is not the
case before commit d257cc8c as the writer that set the handoff bit
will clear it when exiting out via the out_nolock path. This is less
efficient as the busy rwsem stays in an unlock state for a longer time.

In some cases, this new behavior may cause lockups as shown in [1] and
[2].

This patch allows a non-first writer to ignore the handoff bit if it
is not originally set or initiated by the first waiter. This patch is
shown to be effective in fixing the lockup problem reported in [1].

[1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/
[2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/

Fixes: d257cc8c ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com

Pull misc fixes from Andrew Morton:
 "Two hotfixes, both cc:stable"

* tag 'mm-hotfixes-stable-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/hmm: fault non-owner device private entries
  page_alloc: fix invalid watermark check on a negative value

Pull block fix from Jens Axboe:
 "Just a single fix for NVMe, yet another quirk addition"

* tag 'block-5.19-2022-07-29' of git://git.kernel.dk/linux-block:
  nvme-pci: Crucial P2 has bogus namespace ids

Pull more drm fixes from Dave Airlie:
 "Maxime had the dog^Wmailing list server eat his homework^Wmisc pull
  request.

  Two more small fixes, one in nouveau svm code and the other in
  simpledrm.

  nouveau:
   - page migration fix

  simpledrm:
   - fix mode_valid return value"

* tag 'drm-fixes-2022-07-30' of git://anongit.freedesktop.org/drm/drm:
  nouveau/svm: Fix to migrate all requested pages
  drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()

One fix to fix simpledrm mode_valid return value, and one for page
migration in nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729094514.sfzhc3gqjgwgal62@penduick

Pull SCSI fixes from James Bottomley:
 "Four fixes, three in drivers.

  The two biggest fixes are ufs and the remaining driver and core fix
  are small and obvious (and the core fix is low risk)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix a race condition related to device management
  scsi: core: Fix warning in scsi_alloc_sgtables()
  scsi: ufs: host: Hold reference returned by of_parse_phandle()
  scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown

Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt"
with the respective retbleed= settings.
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: corbet@lwn.net
Link: https://lore.kernel.org/r/20220728043907.165688-1-eiichi.tsukata@nutanix.com

If hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a
device private PTE is found, the hmm_range::dev_private_owner page is used
to determine if the device private page should not be faulted in. 
However, if the device private page is not owned by the caller,
hmm_range_fault() returns an error instead of calling migrate_to_ram() to
fault in the page.

For example, if a page is migrated to GPU private memory and a RDMA fault
capable NIC tries to read the migrated page, without this patch it will
get an error.  With this patch, the page will be migrated back to system
memory and the NIC will be able to read the data.

Link: https://lkml.kernel.org/r/20220727000837.4128709-2-rcampbell@nvidia.com
Link: https://lkml.kernel.org/r/20220725183615.4118795-2-rcampbell@nvidia.com
Fixes: 08ddddda ("mm/hmm: check the device private page owner in hmm_range_fault()")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reported-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

There was a report that a task is waiting at the
throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was
increasing.

This is a bug where zone_watermark_fast returns true even when the free
is very low. The commit f27ce0e1 ("page_alloc: consider highatomic
reserve in watermark fast") changed the watermark fast to consider
highatomic reserve. But it did not handle a negative value case which
can be happened when reserved_highatomic pageblock is bigger than the
actual free.

If watermark is considered as ok for the negative value, allocating
contexts for order-0 will consume all free pages without direct reclaim,
and finally free page may become depleted except highatomic free.

Then allocating contexts may fall into throttle_direct_reclaim. This
symptom may easily happen in a system where wmark min is low and other
reclaimers like kswapd does not make free pages quickly.

Handle the negative case by using MIN.

Link: https://lkml.kernel.org/r/20220725095212.25388-1-jaewon31.kim@samsung.com
Fixes: f27ce0e1 ("page_alloc: consider highatomic reserve in watermark fast")
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Reported-by: GyeongHwan Hong <gh21.hong@samsung.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix addresses for bss symbols, describing variables used in resolving
   data access in tools such as 'perf c2c' and 'perf mem'.

 - Skip symbols if SHF_ALLOC flag is not set, a technique used for
   listing deprecated symbols, its addresses are zeros, so not useful.

 - Remove undefined behavior from bpf_perf_object__next() when dealing
   with an empty bpf_objects_list list.

 - Make a ARM CoreSight disasm script work with both python2 and
   python3.

 - Sync x86's cpufeatures header with with the kernel sources.

* tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bpf: Remove undefined behavior from bpf_perf_object__next()
  perf symbol: Skip symbols if SHF_ALLOC flag is not set
  perf symbol: Correct address for bss symbols
  perf scripts python: Let script to be python2 compliant
  tools headers cpufeatures: Sync with the kernel sources

Pull workqueue fix from Tejun Heo:
 "Just one commit to suppress a spurious warning added during the 5.19
  cycle"

* tag 'wq-for-5.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Avoid a false warning in unbind_workers()

Pull power management fix from Rafael Wysocki:
 "Make some false positive RCU splats resulting from a recent intel_idle
  driver change go away (Waiman Long)"

* tag 'pm-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: Fix false positive RCU splats due to incorrect hardirqs state

Doing set_cpus_allowed_ptr() with wq_unbound_cpumask can be possible
fails and trigger the false warning.

Use cpu_possible_mask instead when wq_unbound_cpumask has no active CPUs.

It is very easy to trigger the warning:
  Set wq_unbound_cpumask to a small set of CPUs.
  Offline all the CPUs of wq_unbound_cpumask.
  Offline an extra CPU and trigger the warning.

Fixes: 10a5a651 ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull RISC-V fix from Palmer Dabbelt:
 "A build fix for 'make vdso_install' that avoids an issue trying to
  install the compat VDSO"

* tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: compat: vdso: Fix vdso_install target

Merge tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:

 - Fix cache size calculation, stack protection attributes, ptrace's
   fpr_set and "ROM Size" in boardinfo

 - Some cleanups and improvements of assembly

 - Some cleanups of unused code and useless code

* tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix wrong "ROM Size" of boardinfo
  LoongArch: Fix missing fcsr in ptrace's fpr_set
  LoongArch: Fix shared cache size calculation
  LoongArch: Disable executable stack by default
  LoongArch: Remove unused variables
  LoongArch: Remove clock setting during cpu hotplug stage
  LoongArch: Remove useless header compiler.h
  LoongArch: Remove several syntactic sugar macros for branches
  LoongArch: Re-tab the assembly files
  LoongArch: Simplify "BGT foo, zero" with BGTZ
  LoongArch: Simplify "BLT foo, zero" with BLTZ
  LoongArch: Simplify "BEQ/BNE foo, zero" with BEQZ/BNEZ
  LoongArch: Use the "move" pseudo-instruction where applicable
  LoongArch: Use the "jr" pseudo-instruction where applicable
  LoongArch: Use ABI names of registers where appropriate

Pull powerpc fixes from Michael Ellerman:

 - Re-enable the new amdgpu display engine for powerpc, as long as the
   compiler is correctly configured.

 - Disable stack variable initialisation in prom_init to fix GCC 12
   allmodconfig.

Thanks to Dan Horák and Sudip Mukherjee.

* tag 'powerpc-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  drm/amdgpu: Re-enable DCN for 64-bit powerpc
  powerpc/64s: Disable stack variable initialisation for prom_init

We can see the "ROM Size" is different in the following outputs:

[root@linux loongson]# cat /sys/firmware/loongson/boardinfo
BIOS Information
Vendor                  : Loongson
Version                 : vUDK2018-LoongArch-V2.0.pre-beta8
ROM Size                : 63 KB
Release Date            : 06/15/2022

Board Information
Manufacturer            : Loongson
Board Name              : Loongson-LS3A5000-7A1000-1w-A2101
Family                  : LOONGSON64

[root@linux loongson]# dmidecode | head -11
...
Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
	Vendor: Loongson
	Version: vUDK2018-LoongArch-V2.0.pre-beta8
	Release Date: 06/15/2022
	ROM Size: 4 MB

According to "BIOS Information (Type 0) structure" in the SMBIOS
Reference Specification [1], it shows 64K * (n+1) is the size of
the physical device containing the BIOS if the size is less than
16M.

Additionally, we can see the related code in dmidecode [2]:

  u64 s = { .l = (code1 + 1) << 6 };

So the output of dmidecode is correct, the output of boardinfo
is wrong, fix it.

By the way, at present no need to consider the size is 16M or
greater on LoongArch, because it is usually 4M or 8M which is
enough to use.

[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
[2] https://git.savannah.nongnu.org/cgit/dmidecode.git/tree/dmidecode.c#n347

Fixes: 628c3bb4 ("LoongArch: Add boot and setup routines")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In file ptrace.c, function fpr_set does not copy fcsr data from ubuf
to kbuf. That's the reason why fcsr cannot be modified by ptrace.

This patch fixs this problem and allows users using ptrace to modify
the fcsr.
Co-developed-by: Xu Li <lixu@loongson.cn>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Current calculation of shared cache size is from the node (die) scope,
but we hope 'lscpu' to show the shared cache size of the whole package
for multi-die chips (e.g., Loongson-3C5000L, which contains 4 dies in
one package). So fix it by multiplying nodes_per_package.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Disable executable stack for LoongArch by default, as all modern
architectures do.
Reported-by: Andreas Schwab <schwab@suse.de>
Suggested-by: WANG Xuerui <git@xen0n.name>
Link: https://sourceware.org/pipermail/binutils/2022-July/121992.htmlTested-by: WANG Xuerui <git@xen0n.name>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

There are some variables never used or referenced, this patch
removes these varaibles and make the code cleaner.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

On physical machine we can save power by disabling clock of hot removed
cpu. However as different platforms require different methods to
configure clocks, the code is platform-specific, and probably belongs to
firmware/pmu or cpu regulator, rather than generic arch/loongarch code.

Also, there is no such register on QEMU virt machine since the
clock/frequency regulation is not emulated.

This patch removes the hard-coded clock register accesses in generic
LoongArch cpu hotplug flow.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The content of LoongArch's compiler.h is trivial, with some unused
anywhere, so inline the definitions and remove the header.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

These syntactic sugars have been supported by upstream binutils from the
beginning, so no need to patch them locally.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Reflow the *.S files for better stylistic consistency, namely hard tabs
after mnemonic position, and vertical alignment of the first operand
with hard tabs. Tab width is obviously 8. Some pre-existing intra-block
vertical alignments are preserved.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Support for the syntactic sugar is present in upstream binutils port
from the beginning. Use it for shorter lines and better consistency.
Generated code should be identical.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>