- 27 Jun, 2005 40 commits
-
-
Kiril Jovchev authored
Added support for Creative WebCam Go Mini. Camera has STV680 chip and just different Product ID(0x4007) and Vendor ID (0x041e). Signed-off-by:
Kiril Jovchev <jovchev@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
C. Adam Oldham authored
Initialize status fields in the read and write urbs to prevent a race condition with open/read/close - open/write/close sequences. Fixes bug #4432 at bugzilla.kernel.org Signed-off-by:
Adam Oldham <oldhamca@gmail.com> Signed-off-by:
-
David Brownell authored
This provides declarations for new requests, descriptors, and bitfields as defined in the Wireless USB 1.0 spec. Device support will involve a new "Wire Adapter" device class, connecting a USB Host to a cluster of wireless USB devices. There will be two adapter types: * Host Wireless Adapter (HWA): the downstream link is wireless, which connects a wireless USB host to wireless USB devices (not unlike like a hub) including to the second type of adapter. * Device Wireless Adapter (DWA): the upstream link is wireless, for connecting existing USB devices through wired links into the cluser. All wireless USB devices will need persistent (and secure!) key storage, and it's probable that Linux -- or device firmware -- will need to be involved with that to bootstrap the initial secure key exchange. Some user interface is required in that initial key exchange, and since the most "hands-off" one is a wired USB link, I suspect wireless operation will usually not be the only mode for wireless USB devices. (Plus, devices can recharge batteries using wired USB...) All other key exchange protocols need error prone user interactions, like copying and/or verifying keys. It'll likely be a while before we have commercial Wireless USB hardware, much less Linux implementations that know how to use it. Signed-off-by:David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
The itd_patch() function is responsible for allocating entries in the buffer page pointer list of the iTD. Particularly, a new page pointer is needed every time when buffer data crosses a page boundary. However, there is a bug in the allocation logic: the function does not allocate a new entry when the current transaction is the first transaction in the iTD (as indicated by first!=0). The consequence is that, when the data of the first transaction begins somewhere at the end of a page so that it actually does cross the page boundary, no new page pointer is allocated. This means that the data at the end of the first transaction (beyond the page boundary) will be accessed by the HC using the second page pointer, which is zero. Furthermore, the first page pointer will be later overwritten by the page pointers of the other transactions, which will garble it because the value is or-ed into the iTD field. All this particular check (for !first) does is cause incorrect behaviour, so it should be entirely removed (and with it the variable first that is not used for anything else). Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Alan Stern authored
This patch changes the way uhci-hcd detects valid ports. The specification doesn't mention any way to find out how many ports a controller has, so the driver has to use some heuristics, reading the port status and control register and deciding whether the value makes sense. With this patch the driver will recognize a typical failure mode (all bits set to one) for nonexistent ports and won't assume there are always at least 2 ports -- such an assumption seems silly if the heuristics have already shown that the ports don't exist. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
David Brownell authored
Drain the rndis response queue on disconnect. This fixes a problem in which an rndis response left in the queue from a previous session could cause a subsequent session to fail. Signed-off-by:
Andy Lowe <alowe@mvista.com> Signed-off-by:
-
David Brownell authored
This fixes a compile glitch with CONFIG_USB_ETH_RNDIS disabled, and replaces some inline #ifdeffery (and other code) with inline functions which can evaluate to constants. Signed-off-by:
-
Alan Stern authored
This patch adds support to dummy_hcd for suspending and resuming the root hub and the emulated platform devices. Signed-off-by:
-
Alan Stern authored
This patch fixes the byte-ordering issue for setup packets in the dummy_hcd driver and cleans up a few things that sparse -Wbitwise dislikes. Signed-off-by:
-
Duncan Sands authored
you seem to have applied the original, not the new improved one with whiter teeth that uses kcalloc instead of kmalloc + memset. Here's a patch that goes on top of the one you applied. Signed-off-by:
Duncan Sands <baldrick@free.fr> Signed-off-by:
-
Andrew Morton authored
Work around the gcc-2.95.x macro expansion bug. Cc: Duncan Sands <baldrick@free.fr> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Duncan Sands authored
Zero the entire instance, not just the struct usbatm_data head. Make sure the just allocated urb is freed if we fail to allocate a buffer. Based on a patch by Stanislaw W. Gruszka. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Duncan Sands authored
Reduce the number of "unknown vpi/vci" debug messages to (usually) at most one per-urb, rather than one per-cell. This is only an issue when (a) many packets come in but no connection is open; and (b) CONFIG_USB_DEBUG is set. Signed-off-by:
-
Duncan Sands authored
Makefile and Kconfig entries for the new drivers. Signed-off-by:
-
Duncan Sands authored
Doesn't do any firmware loading etc, just transmission and reception. The user needs to take care of modem initialization, and load the module with parameters giving the endpoints to use and so forth. Signed-off-by:
-
Duncan Sands authored
Driver for modems based on the Conexant AccessRunner chipset. Original patch by Josep Comas, much reworked by Roman Kagan. Signed-off-by:
-
Duncan Sands authored
Port the speedtch driver to the new usbatm core. The code is much the same as before, just reorganized, though I threw in some minor improvements (a new module parameter for choosing the altsetting, more robust urb failure handling, ...) while I was there. Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
-
Duncan Sands authored
Rework the core usbatm code: minidrivers (i.e. drivers for particular modems) now register themselves with the usbatm core, supplying methods for binding/unbinding etc. The design was inspired by usb-serial and usbnet. At the same time, more common code from the speedtch and cxacru (patch 3/5) drivers was generalized and moved into the core. The transmission and reception parts have been unified and simplified. Since this is a major change and I don't like underscores in file names, usb_atm.[ch] has been renamed usbatm.[ch]. Many thanks to Roman Kagan, who did a lot of the coding. Signed-off-by:
-
David Brownell authored
Various minor EHCI updates * Dump some more info in the debug dumps, notably the product description (e.g. chip vendor), BIOS handhake flags, and debug port status (when it's not managed by the HCD). * Minor updates to the BIOS handoff code: always flag the HCD as owned by Linux (in case BIOS doesn't grab it "early"), and on the buggy-BIOS path always match the "early handoff" code and forcibly disable SMI IRQs. * For the disabled 64bit DMA support, there's now a constant to use for the mask; use it. Signed-off-by: -
David Brownell authored
This has several small updates to the px2xx UDC driver: * small fixes from Eugeny S. Mints <emints@ru.mvista.com> - local_irq_save() around potential endpoint disable race - fix handling of enqueue to OUT endpoints (potential oops) * add shutdown() method to disable any D+ pullup * rename methods accessing raw signals, referencing the signals * describes itself as for "pxa25x", since pxa27x is different Signed-off-by: -
David Brownell authored
Sparse updates; and the API change for SETUP packets being in USB byteorder. Signed-off-by:
-
David Brownell authored
This is mostly "sparse" related updates, one of which was a missing le32_to_cpu() should have affected big-endian hardware. Notable is the API change: setup packets are now provided in USB byte order. This affects only big-endian hardware, and the gadget drivers have been updated in a separate patch. Signed-off-by:
-
David Brownell authored
This updates most of the gadget framework to expect SETUP packets use USB byteorder (matching the annotation in <linux/usb_ch9.h> and usage in the host side stack): - definition in <linux/usb_gadget.h> - gadget drivers: Ethernet/RNDIS, serial/ACM, file_storage, gadgetfs. - dummy_hcd It also includes some other similar changes as suggested by "sparse", which was used to detect byteorder bugs. Signed-off-by:
-
David Brownell authored
This prevents gadget drivers from being selected when no controller has been selected, by adding an additional boolean and depending on it. It's mostly to help "allmodconfig". Signed-off-by:
-
Florian Echtler authored
Signed-off-by:
Florian Echtler <echtler@fs.tum.de> Signed-off-by:
Andreas Deresch <aderesch@fs.tum.de> Signed-off-by:
-
Alan Stern authored
This patch makes the dummy_hcd driver use emulated root-hub interrupts instead of polling. It's in the spirit of similar changes being made to the other HCDs. Signed-off-by:
-
Alan Stern authored
This patch adds to the dummy_hcd driver a new routine for keeping track of all changes in the state of the emulated USB link. The logic is now kept in one spot instead of spread around, and it's easier to verify and update the code. The behavior of the port features has been corrected in a few respects as well (for instance, if the POWER feature is clear then none of the other features can be set). Also added is support for the (relatively new) _connect() and _disconnect() calls of the Gadget API. Signed-off-by:
-
Alan Stern authored
This patch makes the dummy_hcd driver create separate platform devices for the emulated host controller and emulated device controller. This gives a more accurate simulation and will permit testing of situations where only one of the two devices is suspended. This also changes the name of the host controller platform device to match the name of the driver. That way the normal platform bus probe mechanism will handle binding the driver to the device. Signed-off-by:
-
Alan Stern authored
This patch makes some cosmetic changes to dummy_hcd: Minor alterations of comments and whitespace. Replace USB_PORT_FEAT_xxx with USB_PORT_STAT_xxx. This is appropriate as the values are stored in a status variable and they aren't feature indices. Also it allows the elimination of a bunch of awkward bit shift operations. Signed-off-by:
-
Alan Stern authored
Partial OTG support for dummy_hcd, mostly as a framework for further work. It emulates the new OTG flags in the host and peripheral frameworks, if that option is configured. But it's incomplete: - Resetting the peripheral needs to clear the OTG state bits; a second enumeration won't work correctly. - This stops modeling HNP right when roles should switch the first time. It should probably disconnect, then set the usb_bus.is_b_host and usb_gadget.is_a_peripheral flags; then it'd enumerate almost normally, except for the role reversal. Roles could then switch a second time, back to "normal" (with those flags cleared). - SRP should be modeled as "resume from port-unpowered", which is a state that usbcore doesn't yet use. HNP can be triggered by enabling the OTG whitelist and configuring a gadget driver that's not in that list; or by configuring Gadget Zero to identify itself as the HNP test device. Sent-by:David Brownell <david-b@pacbell.net> Signed-off-by:
-
David Brownell authored
More omap_udc updates: * OMAP 1710 updates - new UDC bit for clearing endpoint toggle, affecting CLEAR_HALT - new OTG bits affecting wakeup * Fix the bug Vladimir noted, that IN-DMA transfer code path kicks in for under 1024 bytes (not "up to 1024 bytes") * Handle transceiver setup more intelligently - use transceiver whenever one's available; this can be handy for GPIO based, loopback, or transceiverless configs - cleanup correctly after the "unrecognized HMC" case * DMA performance tweaks - allow burst/pack for memory access - use 16 bit DMA access most of the time on TIPB * Add workarounds for some DMA errata (not observed "in the wild"): - DMA CSAC/CDAC reads returning zero - RX/TX DMA config registers bit 12 always reads as zero (TI patch) * More "sparse" warnings removed, notably "changing" the SETUP packet to return data in USB byteorder (an API change, null effect on OMAP except for these warnings). Signed-off-by: -
David Brownell authored
Some cleanup for the the Ethernet part of the Ethernet/RNDIS gadget driver: - Remove remnants of ancient endpoint init logic; this is simpler, clearer - Save a smidgeon of space in the object file - Get rid of some #ifdeffery, mostly by using some newish inlines - Reset more driver state as part of USB reset - Remove a needless wrapper around an RNDIS call - Improve and comment the status interrupt handling: * RNDIS sometimes needs to queue these transfers (rarely in normal cases, but reproducibly while Windows was deadlocking its USB stack) * Mark requests as busy/not - Enable the SET_NETDEV_DEV() call; sysfs seems to behave sanely now This is a net shrink of source code. Signed-off-by: -
David Brownell authored
Some bugfixes and lots of cleanup (net code shrink): - On reset, force the RNDIS state machine its initial state - Hook up the RNDIS (outgoing) filters to the CDC mechanism - Lots of cleanup: * Eliminate duplicate copy of OID table; * Unify handlying of the OID "query" response data pointer; * Reduce code duplication for calculating query response lengths; * Remove some checks for "can't happen" errors; * Get rid of debugging #ifdefs by making the debug flag an integer level Most of the patch, by volume, relates to those query response cleanups. It incidentally shaves off a few hundred bytes of object code. Signed-off-by: -
Alan Stern authored
This patch changes the host controller drivers; they no longer need to register their root hubs because usbcore will take care of it for them. Signed-off-by:
-
Alan Stern authored
This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by:
-
Alan Stern authored
This patch changes the HCDs that used the old hub_set_power_budget call, making them use the new hcd->power_budget field instead. Signed-off-by:
-
Alan Stern authored
This patch simplifies the uhci-hcd driver by removing the device pointer currently stored in the QH and TD structures. Those pointers weren't being used for anything other than to increment the device's reference count, which is unnecessary since the device is used only when an URB completes, and outstanding URBs take their own reference to the device. As a useful side effect, this change means that uhci-hcd no longer needs to have the root-hub device available in the start routine. Signed-off-by:
-
Alan Stern authored
This patch removes the hub_set_power_budget routine, which was used by a couple of HCDs to indicate that the root hub was running on battery power. In its place is a new field added to struct usb_hcd, which HCDs can set before the root hub is registered. Special-case code in the hub driver knows to look at this field when configuring a root hub. Signed-off-by:
-
Colin Leroy authored
My patch adding PM support for zd1201 didn't check for the device on resume, which can oops if the device has been removed. This patch fixes it. Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
-
