lockdep need a static key.
Previously we set ignore bit to avoid the warning.
Now call sysfs_attr_init to initialize the static key.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-and-Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Unzero char is accepted by sscanf, so when data is structure but
unexpectedly return error invalid;
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, it is not clear how ras is supported. Both software and
hardware can set the supported. That is confusing.

Fix it by adding new member hw_supported.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set ignore bit to satisfy locpdep.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Ta is optional, so check if ta firmware is loaded or not.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The descriptions of modinfo wrongly show two parameters
for each feature(see below). This patch can fix this
incorrect outputs.

parm:           amdgpu_ras_enable:Enable RAS features on the GPU (0 = disable, 1 = enable, -1 = auto (default))
parm:           ras_enable:int
parm:           amdgpu_ras_mask:Mask of RAS features to enable (default 0xffffffff), only valid when ras_enable == 1
parm:           ras_mask:uint
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

query sram ecc capability via amdgpu_atomfirmware_ecc_default_enabled
query ecc availability via amdgpu_atomfirmware_sram_ecc_supported
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

sram ecc capability could be get from firmware_capability field in firmwareinfo table
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ecc default status (enabled or disabled) could be get from umc_config field in umc_info table
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add new umc_info structures and new firmware_capability defines
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Suspend will put irq, so resume need get irq back.
And in the same time, skip other ras initialization.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RAS ECC event will combine with GPU reset event, due to
ECC interrupts are caused by uncorrectable error that triggers
GPU reset.

v2: Fix misleading-indentation warning
v3: fix build with CONFIG_HSA_AMD disabled
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is to collaborate with HSA_CAPABILITY in libhsakmt.

v2: squash in NULL pointer check
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, the debugfs control node can't parse bash-like commands.
Now add such support for any tester that uses scripts.

v2: squash in fixes for input validation
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu reset is not stable on vega20 A1.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a query for userspace to check which RAS features
are enabled.

v2: squash in warning fix
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add AMDGPU_CTX_QUERY2_FLAGS_RAS_CE/UE which indicate if any error happened
between previous query and this query.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Register ecc interrupts and ecc interrupt handler on gfx9.
Add ras support on gfx9

v2: squash in warning fix
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

register IH, enable ras features on sdma.
create sysfs debugfs file for sdma.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Mark vram pages with errors as bad and prevent the driver
from using them.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

allow userspace enable/disable ras
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add obj management.
add feature control.
add debugfs infrastructure.
add sysfs infrastructure.
add IH infrastructure.
add recovery infrastructure.

It is a framework. Other IPs need call amdgpu_ras_xxx function instead of
psp_ras_xxx functions.

v2: squash in warning fixes
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add trigger_error and cure_posion.
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add ras fw loading, init, terminate.
Add ras cmd submit helper.
Add ras feature enable/disable common function.

v2: squash in unused variable warning fix
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Define the driver side interface for ras ta.
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allow RAS feature enable/disable via boot parameter.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Output the ta fw, aka xgmi/ras, via debugfs.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add ras fw part, xgmi and ras fw are combined together in ta binary.
Reading the data from the info is not implemented yet.

v2: squash in "drm/amdgpu: fix NULL pointer when ta is missing"
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

each asic may be has different smc if version,
so move its to asic file to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

simplify macro of MSG_MAP for sw-smu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use function parameter mc as the second parameter of amdgpu_gmc_vram_location,
so codes look more consistent.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
For new DC planes the correct plane address fields are filled based
on whether the plane had a graphics or video format.

However, when we perform stream and plane updates using DC we only ever
fill in the graphics format fields. This causing corruption and hangs
when using video surface formats like NV12 for planes.

[How]
Use the same logic everywhere we update dc_plane_address - always
fill in the correct fields based on the surface format type.

There are 3 places this is done:

- Atomic check, during DC plane creation
- Atomic commit, during plane prepare_fb
- Atomic commit tail, during amdgpu_dm_commit_planes

We use the fill_plane_tiling_attributes in all 3 locations and it
already needs the address to update DCC attributes, so the surface
address update logic can be moved into this helper.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Problem:
Using SDMA for TLB invalidation in certain ASICs exposed a problem
of IB pool not being ready while SDMA already up on Init and already
shutt down while SDMA still running on Fini. This caused
IB allocation failure. Temproary fix was commited into a
bringup branch but this is the generic fix.

Fix:
Init IB pool rigth after GMC is ready but before SDMA is ready.
Do th opposite for Fini.

v2: Remove restriction on SDMA early init and move amdgpu_ib_pool_fini
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Cursor updates must acquire the pipe control lock to
prevent vupdate from triggering in the middle of cursor
programming. On DCN1 the pipe control lock prevents
pageflips from occurring. This means that a cursor update
right before vupdate can delay a pending pageflip

[How]
If the time until the next vupdate is less than a
conservative estimate of the cursor programming time,
wait until the vupdate has passed before locking.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
We will not retry when EDID read failure using i2c over aux

[how]
treat i2c over aux failure the same as defer
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>