- 28 Sep, 2017 5 commits
-
-
Rodrigo Vivi authored
One of the differences I spotted for GEN8+ platforms when compared to older platforms is that spec for BDW+ includes this sentence: "The first CRC done indication after CRC is first enabled is from only a partial frame, so it will not have the expected CRC result." This is an indication that on BDW+ platforms, by the time we receive the interrupt the CRC is not accurate yet for the full frame. That would be ok, because we are already skipping the first CRC for all platforms. However the comment on the code state that it is for some unknown reason. Also, on CHV (gen8 lp) we were already discarding the second CRC as well to make sure we have a reliable CRC on hand. So based on all ou tests and bugs it seems that it is not on CHV that needs to discard 2 first CRCs, but all BDW+ platforms. Starting on SKL we have this CRC done bit (24), but the experiments around the use of this bit wasn't that stable as just discarding the second CRC. So, let's for now just move with CHV solution for all gen8+ platforms and make our CI a bit more stable. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102374 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101309 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
vathsala nagaraju authored
Set frames before SU entry value for max resync frame count of dpcd register 2009, bit field 0:3. v2 : - add macro EDP_PSR2_FRAME_BEFORE_SU (Rodrigo) - remove EDP_FRAMES_BEFORE_SU_ENTRY (Rodrigo) - add check ==1 for dpcd_read call (ville) v3 : (Rodrigo) - move macro EDP_PSR2_FRAME_BEFORE_SU after EDP_PSR2_FRAME_BEFORE_SU - replace with &= v4 : - change the macro to shift value (jani) - updated register names Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> CC: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by:
Vathsala Nagaraju <vathsala.nagaraju@intel.com> Signed-off-by:
-
vathsala nagaraju authored
Add defines for dpcd register 2009 (synchronization latency in sink). v2: - add spec version (Daniel) - use register name as is in spec,only drop excess from end (jani) - add the full register contents (jani) [Rodrigo fixed spec version when merging] Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> CC: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by:
-
Jani Nikula authored
Need MST sideband message transaction to power up/down nodes. Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Tvrtko Ursulin authored
If we store the platform as a bitmask, and convert the IS_PLATFORM macro to use it, we allow the compiler to merge the IS_PLATFORM(a) || IS_PLATFORM(b) || ... checks into a single conditional. As a secondary benefit this saves almost 1k of text: text data bss dec hex filename -1460254 60014 3656 1523924 1740d4 drivers/gpu/drm/i915/i915.ko +1459260 60026 3656 1522942 173cfe drivers/gpu/drm/i915/i915.ko v2: Removed the infamous -1. Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
- 27 Sep, 2017 6 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
First feature pull for 4.15. Highlights: - Per VM BO support - Lots of powerplay cleanups - Powerplay support for CI - pasid mgr for kfd - interrupt infrastructure for recoverable page faults - SR-IOV fixes - initial GPU reset for vega10 - prime mmap support - ttm page table debugging improvements - lots of bug fixes * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (232 commits) drm/amdgpu: clarify license in amdgpu_trace_points.c drm/amdgpu: Add gem_prime_mmap support drm/amd/powerplay: delete dead code in smumgr drm/amd/powerplay: delete SMUM_FIELD_MASK drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD drm/amd/powerplay: delete SMUM_READ_FIELD drm/amd/powerplay: delete SMUM_SET_FIELD drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD drm/amd/powerplay: delete SMUM_WRITE_FIELD drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD drm/amd/powerplay: move macros to hwmgr.h drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h drm/amd/powerplay: add new helper functions in hwmgr.h drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair drm/amd/powerplay: refine powerplay code. drm/amd/powerplay: delete dead code in hwmgr.h drm/amd/powerplay: refine interface in struct pp_smumgr_func ...
-
git://anongit.freedesktop.org/git/drm-intelDave Airlie authored
Getting started with v4.15 features: - Cannonlake workarounds (Rodrigo, Oscar) - Infoframe refactoring and fixes to enable infoframes for DP (Ville) - VBT definition updates (Jani) - Sparse warning fixes (Ville, Chris) - Crtc state usage fixes and cleanups (Ville) - DP vswing, pre-emph and buffer translation refactoring and fixes (Rodrigo) - Prevent IPS from interfering with CRC capture (Ville, Marta) - Enable Mesa to advertise ARB_timer_query (Nanley) - Refactor GT number into intel_device_info (Lionel) - Avoid eDP DP AUX CH timeouts harder (Manasi) - CDCLK check improvements (Ville) - Restore GPU clock boost on missed pageflip vblanks (Chris) - Fence register reservation API for vGPU (Changbin) - First batch of CCS fixes (Ville) - Finally, numerous GEM fixes, cleanups and improvements (Chris) * tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel: (100 commits) drm/i915: Update DRIVER_DATE to 20170907 drm/i915/cnl: WaThrottleEUPerfToAvoidTDBackPressure:cnl(pre-prod) drm/i915: Lift has-pinned-pages assert to caller of ____i915_gem_object_get_pages drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk drm/i915/cnl: Allow the reg_read ioctl to read the RCS TIMESTAMP register drm/i915: Move device_info.has_snoop into the static tables drm/i915: Disable MI_STORE_DATA_IMM for i915g/i915gm drm/i915: Re-enable GTT following a device reset drm/i915/cnp: Wa 1181: Fix Backlight issue drm/i915: Annotate user relocs with __user drm/i915: Constify load detect mode drm/i915/perf: Remove __user from u64 in drm_i915_perf_oa_config drm/i915: Silence sparse by using gfp_t drm/i915: io unmap functions want __iomem drm/i915: Add __rcu to radix tree slot pointer drm/i915: Wake up the device for the fbdev setup drm/i915: Add interface to reserve fence registers for vGPU drm/i915: Use correct path to trace include drm/i915: Fix the missing PPAT cache attributes on CNL drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
UAPI Changes: Cross-subsystem Changes: Core Changes: - DP SDP defines (Ville) - polish for scdc helpers (Thierry Reding) - fix lifetimes for connector/plane state across crtc changes (Maarten Lankhorst). - sparse fixes (Ville+Thierry) - make legacy kms ioctls all interruptible (Maarten) - push edid override into the edid helpers (out of probe helpers) (Jani) - DP ESI defines for link status (DK) Driver Changes: - drm-panel is now in drm-misc! - minor panel-simple cleanups/refactoring by various folks - drm_bridge_add cleanup (Inki Dae) - constify a few i2c_device_id structs (Arvind Yadav) - More patches from Noralf's fb/gem helper cleanup - bridge/synopsis: reset fix (Philippe Cornu) - fix tracepoint include handling in drivers (Thierry) - rockchip: lvds support (Sandy Huang) - move sun4i into drm-misc fold (Maxime Ripard) - sun4i: refactor driver load + support TCON backend/layer muxing (Chen-Yu Tsai) - pl111: support more pl11x variants (Linus Walleij) - bridge/adv7511: robustify probing/edid handling (Lars-Petersen Clausen) New hw support: - S6E63J0X03 panel (Hoegeun Kwon) - OTM8009A panel (Philippe CORNU) - Seiko 43WVF1G panel (Marco Franchi) - tve200 driver (Linus Walleij) Plus assorted of tiny patches all over, including our first outreachy patches from applicants for the winter round! * tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits) drm: add backwards compatibility support for drm_kms_helper.edid_firmware drm: handle override and firmware EDID at drm_do_get_edid() level drm/dp: DPCD register defines for link status within ESI field drm/rockchip: Replace dev_* with DRM_DEV_* drm/tinydrm: Drop driver registered message drm/gem-fb-helper: Use debug message on gem lookup failure drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb() drm/bridge: adv7511: Constify HDMI CODEC platform data drm/bridge: adv7511: Enable connector polling when no interrupt is specified drm/bridge: adv7511: Remove private copy of the EDID drm/bridge: adv7511: Properly update EDID when no EDID was found drm/crtc: Convert setcrtc ioctl locking to interruptible. drm/atomic: Convert pageflip ioctl locking to interruptible. drm/legacy: Convert setplane ioctl locking to interruptible. drm/legacy: Convert cursor ioctl locking to interruptible. drm/atomic: Convert atomic ioctl locking to interruptible. drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2. drm/tve200: Clean up panel bridging drm/doc: Update todo.rst drm/dp/mst: Sideband message transaction to power up/down nodes ...
-
Rodrigo Vivi authored
Let's stop this usage before it spreads so much. 1. This check is not part of usual searches happening when adding new platform. 2. There is already a duplication here with INTEL_INFO(dev_priv)->gen and INTEL_GEN(dev_priv). So let's please avoid yet another way. Cc: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170926211346.12009-1-rodrigo.vivi@intel.com
-
Helge Deller authored
Use the %pS printk format for printing symbols from direct addresses. This is important for the ia64, ppc64 and parisc64 architectures, while on other architectures there is no difference between %pS and %pF. Fix it for consistency across the kernel. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1504729681-3504-6-git-send-email-deller@gmx.de
-
Chris Wilson authored
When cancelling requests, also send the notification to any listeners (gvt) that the request is no longer scheduled on hw. They may require to keep the in/out exactly balanced, and so the reuse after the reset may confuse the listener. Fixes: 221ab971 ("drm/i915/execlists: Unwind incomplete requests on resets") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
- 26 Sep, 2017 29 commits
-
-
Ben Widawsky authored
Cannonlake Slice and Subslice information has changed. This patch initially provided by Ben adds the proper sseu initialization. v2: This v2 done by Rodrigo includes: - Fix on Total slices count by avoiding [1][2] and [2][2]. - Inclusion of EU Per Subslice. - Commit message. v3: This v3 done by Rodrigo includes: - Handle all possible bits and extra fuse register. - Use INTEL_GEN macro. - Fully assume uniform distribution so remove union with eu_per_subslice and add proper the comment. v4: This v4 done by Rodrigo includes: - Consider all bits available: 6 bits for slices [27:22] and 4 for subslices [21:18]. v5: This v5 done by Rodrigo includes: - sseu->subslice_mask = (1 << 4) - 1 - missed on previous versions and noticed by Oscar. Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170920183525.20530-1-rodrigo.vivi@intel.com
-
Alex Deucher authored
It was not clear. The rest of the driver is MIT/X11. Reviewed-by:
Christian König <christian.koenig@amd.com> Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Samuel Li authored
v2: drop hdp invalidate/flush. v3: honor pgoff during prime mmap. Add a barrier after cpu access. v4: drop begin/end_cpu_access() for now, revisit later. Signed-off-by:
Samuel Li <Samuel.Li@amd.com> Reviewed-by:
-
Rex Zhu authored
Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
repeated defining in hwmgr.h Reviewed-by:
-
Rex Zhu authored
repeated defining in hwmgr.h use PHM_WAIT_INDIRECT_FIELD instand. Reviewed-by:
-
Rex Zhu authored
repeated defining in hwmgr.h Reviewed-by:
-
Rex Zhu authored
repeated defining in hwmgr.h Reviewed-by:
-
Rex Zhu authored
repeated defining in hwmgr.h Reviewed-by:
-
Rex Zhu authored
repeated defining in hwmgr.h Reviewed-by:
-
Rex Zhu authored
the macro is as same as PHM_WRITE_FIELD Reviewed-by:
-
Rex Zhu authored
the macro is as same as PHM_WRITE_INDIRECT_FIELD Reviewed-by:
-
Rex Zhu authored
the macro is not relevant to SMU, so rename SMU_WAIT_FIELD_UNEQUAL to PHM_WAIT_FIELD_UNEQUAL and move to hwmgr.h Reviewed-by:
-
Rex Zhu authored
the macro is not relevant to SMU, so move to hwmgr.h and rename to PHM_WAIT_VFPF_INDIRECT_FIELD Reviewed-by:
-
Rex Zhu authored
the macro is not relevant to SMU, so move to hwmgr.h and rename to PHM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL Reviewed-by:
-
Rex Zhu authored
the macro is not relevent to SMU, so move to hwmgr.h and rename to PHM_WAIT_INDIRECT_FIELD_UNEQUAL Reviewed-by:
-
Rex Zhu authored
Reviewed-by:
-
Rex Zhu authored
in VFPF macros to support virtualization Reviewed-by:
-
Rex Zhu authored
delete struct smumgr, put smu backend function table in struct hwmgr Reviewed-by:
-
Rex Zhu authored
Reviewed-by:
-
Rex Zhu authored
unify to use struct hwmgr as function parameter in smumgr. Reviewed-by:
-
Christian König authored
Just set the CPU access required flag when we pin it. Signed-off-by:
-
Monk Liu authored
this fix memory leak due to request_firmware after driver unloaded v2: release gmc firmware for gmc6/7/8 as well Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
-
Monk Liu authored
fix missing finish uvd enc_ring. v2: since the adev pointer check in already in ring_fini so drop the check outsider Signed-off-by:
-
Monk Liu authored
this way after KIQ MQD released in drv unloading, CPC can still let KIQ access this MQD thus RLCV SAVE_VF will not fail v2: always use VRAM domain for KIQ MQD no matter BM or SRIOV Signed-off-by:
-
Monk Liu authored
v2: move kcq_disable out of SRIOV, make it genearal Signed-off-by:
-
Monk Liu authored
only with this way we can debug the VMC page fault issue Signed-off-by:
-
Yong Zhao authored
Use it to replace the hard coded value in amdgpu_vm_bo_update_mapping(). Signed-off-by:
Yong Zhao <yong.zhao@amd.com> Reviewed-by:
-
Yong Zhao authored
When max_bytes is not 8 bytes aligned and bo size is larger than max_bytes, the last 8 bytes in a ttm node may be left unchanged. For example, on pre SDMA 4.0, max_bytes = 0x1fffff, and the bo size is 0x200000, the problem will happen. In order to fix the problem, we separately store the max nums of PTEs/PDEs a single operation can set in amdgpu_vm_pte_funcs structure, rather than inferring it from bytes limit of SDMA constant fill, i.e. fill_max_bytes. Together with the fix, we replace the hard code value "10" in amdgpu_vm_bo_update_mapping() with the corresponding values from structure amdgpu_vm_pte_funcs. Signed-off-by:
-
