The FW_PSID version components are 8 bits wide, not 4.

Fixes: db28b6c7 ("bnxt_en: Fix devlink info's stored fw.psid version format.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Broadcom's b53 switches have one IMP (Inband Management Port) that needs
to be programmed using its own designed register. IMP port may be
different than CPU port - especially on devices with multiple CPU ports.

For that reason it's required to explicitly note IMP port index and
check for it when choosing a register to use.

This commit fixes BCM5301x support. Those switches use CPU port 5 while
their IMP port is 8. Before this patch b53 was trying to program port 5
with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5).

It may be possible to also replace "cpu_port" usages with
dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix.

Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GRE tunnel device can pull existing outer headers in ipge_xmit.
This is a rare path, apparently unique to this device. The below
commit ensured that pulling does not move skb->data beyond csum_start.

But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and
thus csum_start is irrelevant.

Refine to exclude this. At the same time simplify and strengthen the
test.

Simplify, by moving the check next to the offending pull, making it
more self documenting and removing an unnecessary branch from other
code paths.

Strengthen, by also ensuring that the transport header is correct and
therefore the inner headers will be after skb_reset_inner_headers.
The transport header is set to csum_start in skb_partial_csum_set.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Fixes: 1d011c48 ("ip_gre: add validation for csum_start")
Reported-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On configs where there is no confirgured direct route to the target of
the ARP probes, these probes are still sent and may be replied to
properly, so no need to repeatedly complain about the missing route.
Signed-off-by: David Decotigny <ddecotig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GRE interfaces are not Ether-like and therefore it is not
possible to generate the v6LL address the same way as (for example)
GRETAP devices.

With default settings, a GRE interface will attempt generating its v6LL
address using the EUI64 approach, but this will fail when the local
endpoint of the GRE tunnel is set to "any". In this case the GRE
interface will end up with no v6LL address, thus violating RFC4291.

SIT interfaces already implement a different logic to ensure that a v6LL
address is always computed.

Change the GRE v6LL generation logic to follow the same approach as SIT.
This way GRE interfaces will always have a v6LL address as well.

Behaviour of GRETAP interfaces has not been changed as they behave like
classic Ether-like interfaces.

To avoid code duplication sit_add_v4_addrs() has been renamed to
add_v4_addrs() and adapted to handle also the IP6GRE/GRE cases.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

tx_done is not used for napi_complete_done(). Thus, NAPI busy polling
mechanism by gro_flush_timeout and napi_defer_hard_irqs will not able
be triggered after a packet is transmitted when there is no receive
packet.

Fix this by taking the maximum value between tx_done and rx_done as
overall budget completed by the rxtx NAPI poll to ensure XDP Tx ZC
operation is continuously polling for next Tx frame. This gives
benefit of lower packet submission processing latency and jitter
under XDP Tx ZC mode.

Performance of tx-only using xdp-sock on Intel ADL-S platform is
the same with and without this patch.

root@intel-corei7-64:~# ./xdpsock -i enp0s30f4 -t -z -q 1 -n 10
 sock0@enp0s30f4:1 txonly xdp-drv
                   pps            pkts           10.00
rx                 0              0
tx                 511630         8659520

 sock0@enp0s30f4:1 txonly xdp-drv
                   pps            pkts           10.00
rx                 0              0
tx                 511625         13775808

 sock0@enp0s30f4:1 txonly xdp-drv
                   pps            pkts           10.00
rx                 0              0
tx                 511619         18892032

Fixes: 132c32ee ("net: stmmac: Add TX via XDP zero-copy socket")
Cc: <stable@vger.kernel.org> # 5.13.x
Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Memory allocated before 'lmac' is stored in 'cgx->lmac_idmap[]' must be
freed explicitly. Otherwise, in case of error, it will leak.

Rename the 'err_irq' label to better describe what is done at this place in
the error handling path.

Fixes: 6f14078e ("octeontx2-af: DMAC filter support in MAC block")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to match 'rvu_alloc_bitmap()', add a 'rvu_free_bitmap()' function
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.

Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previous commit 68233c58 removes the qlcnic_rom_lock()
in qlcnic_pinit_from_rom(), but remains its corresponding
unlock function, which is odd. I'm not very sure whether the
lock is missing, or the unlock is redundant. This bug is
suggested by a static analysis tool, please advise.

Fixes: 68233c58 ("qlcnic: updated reset sequence")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot found that forcing a big quantum attribute would crash hosts fast,
essentially using this:

tc qd replace dev eth0 root fq_codel quantum 4294967295

This is because fq_codel_dequeue() would have to loop
~2^31 times in :

	if (flow->deficit <= 0) {
		flow->deficit += q->quantum;
		list_move_tail(&flow->flowchain, &q->old_flows);
		goto begin;
	}

SFQ max quantum is 2^19 (half a megabyte)
Lets adopt a max quantum of one megabyte for FQ_CODEL.

Fixes: 4b549a2e ("fq_codel: Fair Queue Codel AQM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Protect nft_ct template with global mutex, from Pavel Skripkin.

2) Two recent commits switched inet rt and nexthop exception hashes
   from jhash to siphash. If those two spots are problematic then
   conntrack is affected as well, so switch voer to siphash too.
   While at it, add a hard upper limit on chain lengths and reject
   insertion if this is hit. Patches from Florian Westphal.

3) Fix use-after-scope in nf_socket_ipv6 reported by KASAN,
   from Benjamin Hesmans.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: socket: icmp6: fix use-after-scope
  netfilter: refuse insertion if chain has grown too large
  netfilter: conntrack: switch to siphash
  netfilter: conntrack: sanitize table size default settings
  netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
====================

Link: https://lore.kernel.org/r/20210903163020.13741-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This code is holding spin_lock_bh(&lif->rx_filters.lock); so the
allocation needs to be atomic.

Fixes: 969f8439 ("ionic: sync the filters in the work task")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20210903131856.GA25934@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Bug reported by KASAN:

BUG: KASAN: use-after-scope in inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
Call Trace:
(...)
inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
(...)
nf_sk_lookup_slow_v6 (net/ipv6/netfilter/nf_socket_ipv6.c:91
net/ipv6/netfilter/nf_socket_ipv6.c:146)

It seems that this bug has already been fixed by Eric Dumazet in the
past in:
commit 78296c97 ("netfilter: xt_socket: fix a stack corruption bug")

But a variant of the same issue has been introduced in
commit d64d80a2 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")

`daddr` and `saddr` potentially hold a reference to ipv6_var that is no
longer in scope when the call to `nf_socket_get_sock_v6` is made.

Fixes: d64d80a2 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The commit 733c99ee ("net: fix NULL pointer reference in
cipso_v4_doi_free") was merged by a mistake, this patch try
to cleanup the mess.

And we already have the commit e842cb60 ("net: fix NULL
pointer reference in cipso_v4_doi_free") which fixed the root
cause of the issue mentioned in it's description.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before vlan/port mcast router support was added
br_multicast_set_port_router was used only with bh already disabled due
to the bridge port lock, but that is no longer the case and when it is
called to configure a vlan/port mcast router we can deadlock with the
timer, so always disable bh to make sure it can be called from contexts
with both enabled and disabled bh.

Fixes: 2796d846 ("net: bridge: vlan: convert mcast router global option to per-vlan entry")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ISA DMA API is inconsistent between architectures, and while
powerpc implements most of what the others have, it does not provide
isa_virt_to_bus():

../drivers/net/ethernet/cirrus/cs89x0.c: In function ‘net_open’:
../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function ‘isa_virt_to_bus’ [-Werror=implicit-function-declaration]
     (unsigned long)isa_virt_to_bus(lp->dma_buff));
../drivers/net/ethernet/cirrus/cs89x0.c:894:3: note: in expansion of macro ‘cs89_dbg’
   cs89_dbg(1, debug, "%s: dma %lx %lx\n",

I tried a couple of approaches to handle this consistently across
all architectures, but as this driver is really only used on
ARM, I ended up taking the easy way out and just disable compile
testing on powerpc.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Reported-by: kernel test robot <lkp@intel.com>
Fixes: 47fd22f2 ("cs89x0: rework driver configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for Telit LN920 0x1060 composition

0x1060: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable err is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a statement that is indented one character too deeply,
clean this up.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a statement that is indented one character too deeply,
clean this up.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are various function arguments that are not indented correctly,
clean these up with correct indentation.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a statement that is not indented correctly, add in the
missing tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent changes exposed a bug where specifically-timed requests to the
path manager netlink API could trigger a divide-by-zero in
__tcp_select_window(), as syzkaller does:

divide error: 0000 [#1] SMP KASAN NOPTI
CPU: 0 PID: 9667 Comm: syz-executor.0 Not tainted 5.14.0-rc6+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:__tcp_select_window+0x509/0xa60 net/ipv4/tcp_output.c:3016
Code: 44 89 ff e8 c9 29 e9 fd 45 39 e7 0f 8d 20 ff ff ff e8 db 28 e9 fd 44 89 e3 e9 13 ff ff ff e8 ce 28 e9 fd 44 89 e0 44 89 e3 99 <f7> 7c 24 04 29 d3 e9 fc fe ff ff e8 b7 28 e9 fd 44 89 f1 48 89 ea
RSP: 0018:ffff888031ccf020 EFLAGS: 00010216
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000040000
RDX: 0000000000000000 RSI: ffff88811532c080 RDI: 0000000000000002
RBP: 0000000000000000 R08: ffffffff835807c2 R09: 0000000000000000
R10: 0000000000000004 R11: ffffed1020b92441 R12: 0000000000000000
R13: 1ffff11006399e08 R14: 0000000000000000 R15: 0000000000000000
FS:  00007fa4c8344700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2f424000 CR3: 000000003e4e2003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
 tcp_select_window net/ipv4/tcp_output.c:264 [inline]
 __tcp_transmit_skb+0xc00/0x37a0 net/ipv4/tcp_output.c:1351
 __tcp_send_ack.part.0+0x3ec/0x760 net/ipv4/tcp_output.c:3972
 __tcp_send_ack net/ipv4/tcp_output.c:3978 [inline]
 tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3978
 mptcp_pm_nl_addr_send_ack+0x1ab/0x380 net/mptcp/pm_netlink.c:654
 mptcp_pm_remove_addr+0x161/0x200 net/mptcp/pm.c:58
 mptcp_nl_remove_id_zero_address+0x197/0x460 net/mptcp/pm_netlink.c:1328
 mptcp_nl_cmd_del_addr+0x98b/0xd40 net/mptcp/pm_netlink.c:1359
 genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731
 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
 genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792
 netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0x14e/0x190 net/socket.c:724
 ____sys_sendmsg+0x709/0x870 net/socket.c:2403
 ___sys_sendmsg+0xff/0x170 net/socket.c:2457
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

mptcp_pm_nl_addr_send_ack() was attempting to send a TCP ACK on the
first subflow in the MPTCP socket's connection list without validating
that the subflow was in a suitable connection state. To address this,
always validate subflow state when sending extra ACKs on subflows
for address advertisement or subflow priority change.

Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/229Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pktgen_thread_worker() no longer needs wait variable, delete it.

Fixes: ef87979c ("pktgen: better scheduler friendliness")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Deadlock seen in an instance where the hwstamp configuration
is changed while the driver is running:

[ 3988.736671]  schedule_preempt_disabled+0xe/0x10
[ 3988.736676]  __mutex_lock.isra.5+0x276/0x4e0
[ 3988.736683]  __mutex_lock_slowpath+0x13/0x20
[ 3988.736687]  ? __mutex_lock_slowpath+0x13/0x20
[ 3988.736692]  mutex_lock+0x2f/0x40
[ 3988.736711]  ionic_stop_queues_reconfig+0x16/0x40 [ionic]
[ 3988.736726]  ionic_reconfigure_queues+0x43e/0xc90 [ionic]
[ 3988.736738]  ionic_lif_config_hwstamp_rxq_all+0x85/0x90 [ionic]
[ 3988.736751]  ionic_lif_hwstamp_set_ts_config+0x29c/0x360 [ionic]
[ 3988.736763]  ionic_lif_hwstamp_set+0x76/0xf0 [ionic]
[ 3988.736776]  ionic_eth_ioctl+0x33/0x40 [ionic]
[ 3988.736781]  dev_ifsioc+0x12c/0x420
[ 3988.736785]  dev_ioctl+0x316/0x720

This can be demonstrated with "ptp4l -m -i <intf>"

To fix this, we pull the use of the queue_lock further up above the
callers of ionic_reconfigure_queues() and ionic_stop_queues_reconfig().

Fixes: 7ee99fc5 ("ionic: pull hwstamp queue_lock up a level")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting DSA_MAX_PORTS caused DSA to call b53 callbacks (e.g.
b53_disable_port() during dsa_register_switch()) for invalid
(non-existent) ports. That made b53 modify unrelated registers and is
one of reasons for a broken BCM5301x support.

This problem exists for years but DSA_MAX_PORTS usage has changed few
times. It seems the most accurate to reference commit dropping
dsa_switch_alloc() in the Fixes tag.

Fixes: 7e99e347 ("net: dsa: remove dsa_switch_alloc helper")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).

A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.

This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.

Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the network devices connected to the system beyond
HSO_MAX_NET_DEVICES. add_net_device() in hso_create_net_device()
will be failed for the network_table is full. It will lead to
business failure which rely on network_table, for example,
hso_suspend() and hso_resume(). It will also lead to memory leak
because resource release process can not search the hso_device
object from network_table in hso_free_interface().

Add failure handler for add_net_device() in hso_create_net_device()
to solve the above problems.

Fixes: 72dc1c09 ("HSO: add option hso driver")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3df98d79 ("lsm,selinux: pass flowi_common instead of flowi
to the LSM hooks") introduced flowi{4,6}_to_flowi_common() functions which
cause UBSAN warning when building with LLVM 11.0.1 on Ubuntu 21.04.

 ================================================================================
 UBSAN: object-size-mismatch in ./include/net/flow.h:197:33
 member access within address ffffc9000109fbd8 with insufficient space
 for an object of type 'struct flowi'
 CPU: 2 PID: 7410 Comm: systemd-resolve Not tainted 5.14.0 #51
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
 Call Trace:
  dump_stack_lvl+0x103/0x171
  ubsan_type_mismatch_common+0x1de/0x390
  __ubsan_handle_type_mismatch_v1+0x41/0x50
  udp_sendmsg+0xda2/0x1300
  ? ip_skb_dst_mtu+0x1f0/0x1f0
  ? sock_rps_record_flow+0xe/0x200
  ? inet_send_prepare+0x2d/0x90
  sock_sendmsg+0x49/0x80
  ____sys_sendmsg+0x269/0x370
  __sys_sendmsg+0x15e/0x1d0
  ? syscall_enter_from_user_mode+0xf0/0x1b0
  do_syscall_64+0x3d/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f7081a50497
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 RSP: 002b:00007ffc153870f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f7081a50497
 RDX: 0000000000000000 RSI: 00007ffc15387140 RDI: 000000000000000c
 RBP: 00007ffc15387140 R08: 0000563f29a5e4fc R09: 000000000000cd28
 R10: 0000563f29a68a30 R11: 0000000000000246 R12: 000000000000000c
 R13: 0000000000000001 R14: 0000563f29a68a30 R15: 0000563f29a5e50c
 ================================================================================

I don't think we need to call flowi{4,6}_to_flowi() from these functions
because the first member of "struct flowi4" and "struct flowi6" is

  struct flowi_common __fl_common;

while the first member of "struct flowi" is

  union {
    struct flowi_common __fl_common;
    struct flowi4       ip4;
    struct flowi6       ip6;
    struct flowidn      dn;
  } u;

which should point to the same address without access to "struct flowi".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes kernel NULL pointer dereference when creating nexthop
which is bound with SRv6 decapsulation. In the creation of nexthop,
__seg6_end_dt_vrf_build is called. __seg6_end_dt_vrf_build expects
fc_lninfo in fib6_config is set correctly, but it isn't set in
nh_create_ipv6, which causes kernel crash.

Here is steps to reproduce kernel crash:

1. modprobe vrf
2. ip -6 nexthop add encap seg6local action End.DT4 vrftable 1 dev eth0

We got the following message:

[  901.370336] BUG: kernel NULL pointer dereference, address: 0000000000000ba0
[  901.371658] #PF: supervisor read access in kernel mode
[  901.372672] #PF: error_code(0x0000) - not-present page
[  901.373672] PGD 0 P4D 0
[  901.374248] Oops: 0000 [#1] SMP PTI
[  901.374944] CPU: 0 PID: 8593 Comm: ip Not tainted 5.14-051400-generic #202108310811-Ubuntu
[  901.376404] Hardware name: Red Hat KVM, BIOS 1.11.1-4.module_el8.2.0+320+13f867d7 04/01/2014
[  901.377907] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf]
[  901.379182] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00
[  901.382652] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282
[  901.383746] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8
[  901.385436] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000
[  901.386924] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40
[  901.388537] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000
[  901.389937] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b
[  901.391226] FS:  00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000
[  901.392737] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  901.393803] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0
[  901.395122] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  901.396496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  901.397833] PKRU: 55555554
[  901.398578] Call Trace:
[  901.399144]  l3mdev_ifindex_lookup_by_table_id+0x3b/0x70
[  901.400179]  __seg6_end_dt_vrf_build+0x34/0xd0
[  901.401067]  seg6_end_dt4_build+0x16/0x20
[  901.401904]  seg6_local_build_state+0x271/0x430
[  901.402797]  lwtunnel_build_state+0x81/0x130
[  901.403645]  fib_nh_common_init+0x82/0x100
[  901.404465]  ? sock_def_readable+0x4b/0x80
[  901.405285]  fib6_nh_init+0x115/0x7c0
[  901.406033]  nh_create_ipv6.isra.0+0xe1/0x140
[  901.406932]  rtm_new_nexthop+0x3b7/0xeb0
[  901.407828]  rtnetlink_rcv_msg+0x152/0x3a0
[  901.408663]  ? rtnl_calcit.isra.0+0x130/0x130
[  901.409535]  netlink_rcv_skb+0x55/0x100
[  901.410319]  rtnetlink_rcv+0x15/0x20
[  901.411026]  netlink_unicast+0x1a8/0x250
[  901.411813]  netlink_sendmsg+0x238/0x470
[  901.412602]  ? _copy_from_user+0x2b/0x60
[  901.413394]  sock_sendmsg+0x65/0x70
[  901.414112]  ____sys_sendmsg+0x218/0x290
[  901.414929]  ? copy_msghdr_from_user+0x5c/0x90
[  901.415814]  ___sys_sendmsg+0x81/0xc0
[  901.416559]  ? fsnotify_destroy_marks+0x27/0xf0
[  901.417447]  ? call_rcu+0xa4/0x230
[  901.418153]  ? kmem_cache_free+0x23f/0x410
[  901.418972]  ? dentry_free+0x37/0x70
[  901.419705]  ? mntput_no_expire+0x4c/0x260
[  901.420574]  __sys_sendmsg+0x62/0xb0
[  901.421297]  __x64_sys_sendmsg+0x1f/0x30
[  901.422057]  do_syscall_64+0x5c/0xc0
[  901.422756]  ? syscall_exit_to_user_mode+0x27/0x50
[  901.423675]  ? __x64_sys_close+0x12/0x40
[  901.424462]  ? do_syscall_64+0x69/0xc0
[  901.425219]  ? irqentry_exit_to_user_mode+0x9/0x20
[  901.426149]  ? irqentry_exit+0x19/0x30
[  901.426901]  ? exc_page_fault+0x89/0x160
[  901.427709]  ? asm_exc_page_fault+0x8/0x30
[  901.428536]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  901.429514] RIP: 0033:0x7fe493945747
[  901.430248] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  901.433549] RSP: 002b:00007ffe9932cf68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  901.434981] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe493945747
[  901.436303] RDX: 0000000000000000 RSI: 00007ffe9932cfe0 RDI: 0000000000000003
[  901.437607] RBP: 00000000613053f7 R08: 0000000000000001 R09: 00007ffe9932d07c
[  901.438990] R10: 000055f4a903a010 R11: 0000000000000246 R12: 0000000000000001
[  901.440340] R13: 0000000000000001 R14: 000055f4a802b163 R15: 000055f4a8042020
[  901.441630] Modules linked in: vrf nls_utf8 isofs nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common isst_if_mbox_msr isst_if_common nfit rapl input_leds joydev serio_raw qemu_fw_cfg mac_hid sch_fq_codel drm virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd virtio_net net_failover cryptd psmouse virtio_blk failover i2c_piix4 pata_acpi floppy
[  901.450808] CR2: 0000000000000ba0
[  901.451514] ---[ end trace c27b934b99ade304 ]---
[  901.452403] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf]
[  901.453626] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00
[  901.456910] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282
[  901.457912] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8
[  901.459238] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000
[  901.460552] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40
[  901.461882] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000
[  901.463208] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b
[  901.464529] FS:  00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000
[  901.466058] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  901.467189] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0
[  901.468515] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  901.469858] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  901.471139] PKRU: 55555554
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I tried to make this check stricter as a hardenning measure but it broke
audo and wifi on these devices so revert it.

Fixes: aaa8e492 ("net: qrtr: make checks in qrtr_endpoint_post() stricter")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, outgoing packets larger than 1496 bytes are dropped when
tagged VLAN is used on a switch port.

Add the frame check sequence length to the value of the register
GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver,
which uses a value consisting of 1518 bytes for the MAC frame, plus the
lengths of special tag and VLAN tags.

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test case for commit a6e3f298 ("ip6_tunnel: fix GRE6 segmentation").
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mld_process_v2 only returned 0.

So, the return type is changed to void.
Signed-off-by: Jiwon Kim <jiwonaid0@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/i825xx/sun3_82586.c: In function ‘sun3_82586_probe’:
drivers/net/ethernet/i825xx/sun3_82586.c:317:9: warning: returning ‘struct net_device *’ from a function with return type ‘int’ makes integer from pointer without a cast [-Wint-conversion]
  317 |  return dev;
      |         ^~~

The return type of sun3_82586_probe() was changed, but one return value
was forgotten to be updated.

Fixes: e179d78e ("m68k: remove legacy probing")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds OEM Intel GMA command and response handler for it.
Signed-off-by: Brad Ho <Brad_Ho@phoenix.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210830171806.119857-2-i.mikhaylov@yadro.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Parameter names in the comments did not match the function arguments.

Fixes: 21380817 ("bnxt_en: add support for HWRM request slices")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210901185315.57137-1-edwin.peer@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Prevent tcp_push() crash and selftest temp file buildup

These are two fixes for the net tree, addressing separate issues.

Patch 1 addresses a divide-by-zero crash seen in syzkaller and also
reported by a user on the netdev list. This changes MPTCP code so
tcp_push() cannot be called with an invalid (0) mss_now value.

Patch 2 fixes a selftest temp file cleanup issue that consumes excessive
disk space when running repeated tests.
====================

Link: https://lore.kernel.org/r/20210901171537.121255-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>