- 30 Mar, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-28 (ice) This series contains updates to ice driver only. Jesse fixes mismatched header documentation reported when building with W=1. Brett restricts setting of VSI context to only applicable fields for the given ICE_AQ_VSI_PROP_Q_OPT_VALID bit. Junfeng adds check when adding Flow Director filters that conflict with existing filter rules. Jakob Koschel adds interim variable for iterating to prevent possible misuse after looping. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg() ice: add profile conflict check for AVF FDIR ice: Fix ice_cfg_rdma_fltr() to only update relevant fields ice: fix W=1 headers mismatch ==================== Link: https://lore.kernel.org/r/20230328172035.3904953-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2023-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-03-29 Two small fixes this time. Dongliang Mu removed an unnecessary null pointer check. Harshit Mogalapalli fixed an int comparison unsigned against signed from a recent other fix in the ca8210 driver. * tag 'ieee802154-for-net-2023-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: net: ieee802154: remove an unnecessary null pointer check ca8210: Fix unsigned mac_len comparison with zero in ca8210_skb_tx() ==================== Link: https://lore.kernel.org/r/20230329064541.2147400-1-stefan@datenfreihafen.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
build_skb() no longer accepts slab buffers. Since slab use is fairly uncommon we prefer the drivers to call a separate slab_build_skb() function appropriately. bnx2x uses the old semantics where size of 0 meant buffer from slab. It sets the fp->rx_frag_size to 0 for MTUs which don't fit in a page. It needs to call slab_build_skb(). This fixes the WARN_ONCE() of incorrect API use seen with bnx2x. Reported-by:
Thomas Voegtle <tv@lio96.de> Link: https://lore.kernel.org/all/b8f295e4-ba57-8bfb-7d9c-9d62a498a727@lio96.de/ Fixes: ce098da1 ("skbuff: Introduce slab_build_skb()") Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230329000013.2734957-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
In gsi_trans_pool_init_dma(), the total size of a pool of memory used for DMA transactions is calculated. However the calculation is done incorrectly. For 4KB pages, this total size is currently always more than one page, and as a result, the calculation produces a positive (though incorrect) total size. The code still works in this case; we just end up with fewer DMA pool entries than we intended. Bjorn Andersson tested booting a kernel with 16KB pages, and hit a null pointer derereference in sg_alloc_append_table_from_pages(), descending from gsi_trans_pool_init_dma(). The cause of this was that a 16KB total size was going to be allocated, and with 16KB pages the order of that allocation is 0. The total_size calculation yielded 0, which eventually led to the crash. Correcting the total_size calculation fixes the problem. Reported-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Tested-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Fixes: 9dd441e4 ("soc: qcom: ipa: GSI transactions") Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230328162751.2861791-1-elder@linaro.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 29 Mar, 2023 2 commits
-
-
M Chetan Kumar authored
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in modem crash. 7560 Modem FW uses the MBIM interface for control command communication whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for 7560. Fixes: d08b0f8f ("net: wwan: iosm: add rpc interface for xmm modems") Reported-and-tested-by:
Martin <mwolf@adiumentum.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
Shane Parslow <shaneparslow808@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Felix Fietkau authored
Using the QDMA tx scheduler to throttle tx to line speed works fine for switch ports, but apparently caused a regression on non-switch ports. Based on a number of tests, it seems that this throttling can be safely dropped without re-introducing the issues on switch ports that the tx scheduling changes resolved. Link: https://lore.kernel.org/netdev/trinity-92c3826f-c2c8-40af-8339-bc6d0d3ffea4-1678213958520@3c-app-gmx-bs16/ Fixes: f63959c7 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Reported-by:
Frank Wunderlich <frank-w@public-files.de> Reported-by:
Daniel Golle <daniel@makrotopia.org> Tested-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230324140404.95745-1-nbd@nbd.nameSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 28 Mar, 2023 15 commits
-
-
Jakob Koschel authored
The code implicitly assumes that the list iterator finds a correct handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was pointing to an bogus memory location. For safety a separate list iterator variable should be used to make the != NULL check on 'old_agg_vsi_info' correct under any circumstances. Additionally Linus proposed to avoid any use of the list iterator variable after the loop, in the attempt to move the list iterator variable declaration into the macro to avoid any potential misuse after the loop. Using it in a pointer comparison after the loop is undefined behavior and should be omitted if possible [1]. Fixes: 37c59206 ("ice: remove the VSI info from previous agg") Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by:
Jakob Koschel <jkl820.git@gmail.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Junfeng Guo authored
Add profile conflict check while adding some FDIR rules to avoid unexpected flow behavior, rules may have conflict including: IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP} IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP} For example, when we create an FDIR rule for IPv4, this rule will work on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we then create an FDIR rule for IPv4_UDP and then destroy it, the first FDIR rule for IPv4 cannot work on pkt IPv4_UDP then. To prevent this unexpected behavior, we add restriction in software when creating FDIR rules by adding necessary profile conflict check. Fixes: 1f7ea1cd ("ice: Enable FDIR Configure for AVF") Signed-off-by:
Junfeng Guo <junfeng.guo@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Brett Creeley authored
The current implementation causes ice_vsi_update() to update all VSI fields based on the cached VSI context. This also assumes that the ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the VSI context is not correctly synced by the driver. Fix this by only updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID. Also, make sure to save the updated result in the cached VSI context on success. Fixes: 348048e7 ("ice: Implement iidc operations") Co-developed-by:
Robert Malz <robertx.malz@intel.com> Signed-off-by:
Robert Malz <robertx.malz@intel.com> Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Piotr Raczynski <piotr.raczynski@intel.com> Tested-by:
Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jesse Brandeburg authored
make modules W=1 returns: .../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx' .../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf' .../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb' Fix these warnings by adding and deleting the deviant arguments. Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Fixes: d7956d81 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()") CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Paolo Abeni authored
Juergen Gross says: ==================== xen/netback: fix issue introduced recently The fix for XSA-423 introduced a bug which resulted in loss of network connection in some configurations. The first patch is fixing the issue, while the second one is removing a test which isn't needed. ==================== Link: https://lore.kernel.org/r/20230327083646.18690-1-jgross@suse.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Juergen Gross authored
The tests for the number of grant mapping or copy operations reaching the array size of the operations buffer at the end of the main loop in xenvif_tx_build_gops() isn't needed. The loop can handle at maximum MAX_PENDING_REQS transfer requests, as XEN_RING_NR_UNCONSUMED_REQUESTS() is taking unsent responses into consideration, too. Remove the tests. Suggested-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Paul Durrant <paul@xen.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Juergen Gross authored
Fix xenvif_get_requests() not to do grant copy operations across local page boundaries. This requires to double the maximum number of copy operations per queue, as each copy could now be split into 2. Make sure that struct xenvif_tx_cb doesn't grow too large. Cc: stable@vger.kernel.org Fixes: ad7f402a ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Paul Durrant <paul@xen.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Wolfram Sang authored
SMSC911x doesn't need mdiobus suspend/resume, that's why it sets 'mac_managed_pm'. However, setting it needs to be moved from init to probe, so mdiobus PM functions will really never be called (e.g. when the interface is not up yet during suspend/resume). Fixes: 3ce9f2be ("net: smsc911x: Stop and start PHY during suspend and resume") Suggested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230327083138.6044-1-wsa+renesas@sang-engineering.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Sven Auhagen says: ==================== net: mvpp2: rss fixes This patch series fixes up some rss problems in the mvpp2 driver. The classifier is missing some fragmentation flags, the parser has the QinQ headers switched and the PPPoE Layer 4 detecion is not working correctly. This is leading to no or bad rss for the default settings. ==================== Link: https://lore.kernel.org/r/20230325163903.ofefgus43x66as7i@Svens-MacBookPro.localSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Sven Auhagen authored
In PPPoE add all IPv4 header option length to the parser and adjust the L3 and L4 offset accordingly. Currently the L4 match does not work with PPPoE and all packets are matched as L3 IP4 OPT. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Sven Auhagen authored
The mvpp2 parser entry for QinQ has the inner and outer VLAN in the wrong order. Fix the problem by swapping them. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Reviewed-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Sven Auhagen authored
Add missing IP Fragmentation Flag. Fixes: f9358e12 ("net: mvpp2: split ingress traffic into multiple flows") Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Reviewed-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-03-27 Oleksij Rempel and Hillf Danton contribute a patch for the CAN J1939 protocol that prevents a potential deadlock in j1939_sk_errqueue(). Ivan Orlov fixes an uninit-value in the CAN BCM protocol in the bcm_tx_setup() function. * tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write can: j1939: prevent deadlock by moving j1939_sk_errqueue() ==================== Link: https://lore.kernel.org/r/20230327124807.1157134-1-mkl@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lukas Bulwahn authored
Some MAINTAINERS sections mention to mail patches to the list linux-nfc@lists.01.org. Probably due to changes on Intel's 01.org website and servers, the list server lists.01.org/ml01.01.org is simply gone. Considering emails recorded on lore.kernel.org, only a handful of emails where sent to the linux-nfc@lists.01.org list, and they are usually also sent to the netdev mailing list as well, where they are then picked up. So, there is no big benefit in restoring the linux-nfc elsewhere. Remove all occurrences of the linux-nfc@lists.01.org list in MAINTAINERS. Suggested-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/CAKXUXMzggxQ43DUZZRkPMGdo5WkzgA=i14ySJUFw4kZfE5ZaZA@mail.gmail.com/Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230324081613.32000-1-lukas.bulwahn@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sean Anderson authored
I've read through or reworked a good portion of this driver. Add myself as a reviewer. Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Link: https://lore.kernel.org/r/20230323145957.2999211-1-sean.anderson@seco.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 27 Mar, 2023 11 commits
-
-
Ivan Orlov authored
Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089Signed-off-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Fixes: 6f3b911d ("can: bcm: add support for CAN FD frames") Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Vladimir Oltean authored
The blamed commit has introduced the following tests to dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid(): if (hw->promisc) { netdev_err(dev, "Adding VLAN in promisc mode not supported\n"); return -EPERM; } "VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so, vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC mode. I have the following 2 arguments that this restriction is.... hm, how shall I put it nicely... unproductive :) First, take the case of a Linux bridge. If the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN database. The bridge shall try to call vlan_add_vid() on its bridge ports for each VLAN in the VLAN table. It will do this irrespectively of whether that port is *currently* VLAN-aware or not. So it will do this even when the bridge was created with vlan_filtering 0. But the Linux bridge, in VLAN-unaware mode, configures its ports in promiscuous (IFF_PROMISC) mode, so that they accept packets with any MAC DA (a switch must do this in order to forward those packets which are not directly targeted to its MAC address). As a result, the stmmac driver does not work as a bridge port, when the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y. $ ip link add br0 type bridge && ip link set br0 up $ ip link set eth0 master br0 && ip link set eth0 up [ 2333.943296] br0: port 1(eth0) entered blocking state [ 2333.943381] br0: port 1(eth0) entered disabled state [ 2333.943782] device eth0 entered promiscuous mode [ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported [ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port RTNETLINK answers: Operation not permitted Secondly, take the case of stmmac as DSA master. Some switch tagging protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such, tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters. But also, when a DSA port becomes promiscuous (for example when it joins a bridge), the DSA framework also makes the DSA master promiscuous. Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also programs a VLAN filter on the DSA master, because if the the DSA switch uses a tail tag, then the hardware frame parser of the DSA master will see VLAN as VLAN, and might filter them out, for being unknown. Due to the above 2 reasons, my belief is that the stmmac driver does not get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is enabled, because the 2 are completely independent and there are code paths in the network stack which directly lead to this situation occurring, without the user's direct input. In fact, my belief is that "VLAN promiscuous" mode should have never been keyed on IFF_PROMISC in the first place, but rather, on the NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the user through ethtool -k, when present in netdev->hw_features. In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in "features", making this feature "on [fixed]". I have this belief because I am unaware of any definition of promiscuity which implies having an effect on anything other than MAC DA (therefore not VLAN). However, I seem to be rather alone in having this opinion, looking back at the disagreements from this discussion: https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/ In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC, one would need to remove the check and see what fails. I guess the test was there because of the way in which dwmac4_vlan_promisc_enable() is implemented. For context, the dwmac4 supports Perfect Filtering for a limited number of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN Hash Filtering'. The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data registers, accessed in the driver through dwmac4_write_vlan_filter(). The hash filtering is based on the MAC_VLAN_Hash_Table register, named GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash(). The control bit for enabling hash filtering is GMAC_VLAN_VTHM (MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable). Now, the description of dwmac4_vlan_promisc_enable() is that it iterates through the driver's cache of perfect filter entries (hw->vlan_filter[i], added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables hash matching. This leaves the MAC, according to table "VLAN Match Status" from the documentation, to always enter these data paths: VID |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match |Match Result | |Match Result |Status -------|--------------------|---------|-----------------|---------------- VID!=0 |Fail |0 |don't care |Pass So, dwmac4_vlan_promisc_enable() does its job, but by unsetting GMAC_VLAN_VTHM, it conflicts with the other code path which controls this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash() from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid(). This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again, breaking the "VLAN promiscuity". It turns out that dwmac4_vlan_promisc_enable() is way too complicated for what needs to be done. The MAC_Packet_Filter register also has the VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN tagged packets which don't match the filtering tables (either perfect or hash) are dropped or not. At the moment, this driver unconditionally sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected through the priv->dma_cap.vlhash capability bits of the device, in stmmac_dvr_probe(). I would suggest deleting the unnecessarily complex logic from dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE when becoming IFF_PROMISC, which has the same effect of allowing packets with any VLAN tags, but has the additional benefit of being able to run concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid(). As much as I believe that the VTFE bit should have been exclusively controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by IFF_PROMISC, changing that is not a punctual fix to the problem, and it would probably break the VFFQ feature added by the later commit e0f9956a ("net: stmmac: Add option for VLAN filter fail queue enable"). From the commit description, VFFQ needs IFF_PROMISC=on and VTFE=off in order to work (and this change respects that). But if VTFE was changed to be controlled through ethtool -k, then a user-visible change would have been introduced in Intel's scripts (a need to run "ethtool -k eth0 rx-vlan-filter off" which did not exist before). The patch was tested with this set of commands: ip link set eth0 up ip link add link eth0 name eth0.100 type vlan id 100 ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up ip link set eth0 promisc on ip link add link eth0 name eth0.101 type vlan id 101 ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up ip link set eth0 promisc off ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link set eth0 promisc on ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link del eth0.100 ip link del eth0.101 # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we should see them ip link set eth0 promisc off # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them # anymore, but remove the "-p" argument from tcpdump and they're there. Fixes: c89f44ff ("net: stmmac: Add support for VLAN promiscuous mode") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com Fixes: 5b9272e9 ("can: j1939: extend UAPI to notify about RX status") Co-developed-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Álvaro Fernández Rojas authored
Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing B53_PORT_MII_PAGE registers which hangs the device. This access should be done through the MDIO Mux bus controller. Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by:
Marek Vasut <marex@denx.de> Tested-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Garzarella authored
pkt_list_lock was used before commit 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") to protect the packet queue. After that commit we switched to sk_buff and we are using sk_buff_head.lock in almost every place to protect the packet queue except in vsock_loopback_work() when we call skb_queue_splice_init(). As reported by syzbot, this caused unlocked concurrent access to the packet queue between vsock_loopback_work() and vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock. With the introduction of sk_buff_head, pkt_list_lock is redundant and can cause confusion, so let's remove it and use sk_buff_head.lock everywhere to protect the packet queue access. Fixes: 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Cc: bobby.eshleman@bytedance.com Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== Constify a few sfp/phy fwnodes This series constifies a bunch of fwnode_handle pointers that are only used to refer to but not modify the contents of the fwnode structures. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Constify sfp-bus internal fwnode uses, since we do not modify the fwnode structures. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
sfp_bus_find_fwnode() does not write to the fwnode, so let's make it const. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Faicker Mo authored
The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. Fixes: cfc80d9a ("net: Introduce net_failover driver") Signed-off-by:
Faicker Mo <faicker.mo@ucloud.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 25 Mar, 2023 8 commits
-
-
ChunHao Lin authored
When link speed is 10 Mbps and temperature is under -20°C, RTL8168H and RTL8107E may have rx crc error. Disable phy 10 Mbps pll off to fix this issue. Fixes: 6e1d0b89 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by:
ChunHao Lin <hau@realtek.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Oleksij Rempel says: ==================== net: dsa: microchip: ksz8: fixes for stable changes v2: - use proper Fixes tag - add Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> on all reviewed patches except the ksz8863_smi patch. These fixes address issues such as incomplete FDB extraction, incorrect FID extraction and configuration, incorrect timestamp extraction, and ghost entry extraction from an empty dynamic MAC table. These updates ensure proper functioning of the FDB/MDB functionality for the ksz8863/ksz8873 series of chips. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
FID is directly mapped to VID. However, configuring a MAC address with a VID != 0 resulted in incorrect configuration due to an incorrect bit mask. This kernel commit fixed the issue by correcting the bit mask and ensuring proper configuration of MAC addresses with non-zero VID. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Current regmap bulk access is broken, resulting to wrong reads/writes if ksz_read64/ksz_write64 functions are used. Mostly this issue was visible by using ksz8_fdb_dump(), which returned corrupt MAC address. The reason is that regmap was configured to have max_raw_read/write, even if ksz8863_mdio_read/write functions are able to handle unlimited read/write accesses. On ksz_read64 function we are using multiple 32bit accesses by incrementing each access by 1 instead of 4. Resulting buffer had 01234567.12345678 instead of 01234567.89abcdef. We have multiple ways to fix it: - enable 4 byte alignment for 32bit accesses. Since the HW do not have this requirement. It will break driver. - disable max_raw_* limit. This patch is removing max_raw_* limit for regmap accesses in ksz8863_smi. Fixes: 60a36476 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
net: dsa: microchip: ksz8: ksz8_fdb_dump: avoid extracting ghost entry from empty dynamic MAC table. If the dynamic MAC table is empty, we will still extract one outdated entry. Fix it by using correct bit offset. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
We are using wrong offset, so we will get not a timestamp. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Current ksz8_fdb_dump() is able to extract only max 249 entries on the ksz8863/ksz8873 series of switches. This happened due to wrong bit mask and offset calculation. This commit corrects the issue and allows for the complete extraction of all 1024 entries. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Before this patch, the ksz8_fdb_dump() function had several issues, such as uninitialized variables and incorrect usage of source port as a bit mask. These problems caused inaccurate reporting of vid information and port assignment in the bridge fdb. Fixes: e587be75 ("net: dsa: microchip: update fdb add/del/dump in ksz_common") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-