Skip to content

L
linux
Switch branch/tag
  1. 02 May, 2019 8 commits
    • Thomas Richter's avatar
      perf report: Report OOM in status line in the GTK UI · 167e418f
      Thomas Richter authored 
      An -ENOMEM error is not reported in the GTK GUI.  Instead this error
message pops up on the screen:

[root@m35lp76 perf]# ./perf  report -i perf.data.error68-1

	Processing events... [974K/3M]
	Error:failed to process sample

	0xf4198 [0x8]: failed to process type: 68

However when I use the same perf.data file with --stdio it works:

[root@m35lp76 perf]# ./perf  report -i perf.data.error68-1 --stdio \
		| head -12

  # Total Lost Samples: 0
  #
  # Samples: 76K of event 'cycles'
  # Event count (approx.): 99056160000
  #
  # Overhead  Command          Shared Object      Symbol
  # ........  ...............  .................  .........
  #
     8.81%  find             [kernel.kallsyms]  [k] ftrace_likely_update
     8.74%  swapper          [kernel.kallsyms]  [k] ftrace_likely_update
     8.34%  sshd             [kernel.kallsyms]  [k] ftrace_likely_update
     2.19%  kworker/u512:1-  [kernel.kallsyms]  [k] ftrace_likely_update

The sample precentage is a bit low.....

The GUI always fails in the FINISHED_ROUND event (68) and does not
indicate the reason why.

When happened is the following. Perf report calls a lot of functions and
down deep when a FINISHED_ROUND event is processed, these functions are
called:

  perf_session__process_event()
  + perf_session__process_user_event()
    + process_finished_round()
      + ordered_events__flush()
        + __ordered_events__flush()
	  + do_flush()
	    + ordered_events__deliver_event()
	      + perf_session__deliver_event()
	        + machine__deliver_event()
	          + perf_evlist__deliver_event()
	            + process_sample_event()
	              + hist_entry_iter_add() --> only called in GUI case!!!
	                + hist_iter__report__callback()
	                  + symbol__inc_addr_sample()

	                    Now this functions runs out of memory and
			    returns -ENOMEM. This is reported all the way up
			    until function

perf_session__process_event() returns to its caller, where -ENOMEM is
changed to -EINVAL and processing stops:

 if ((skip = perf_session__process_event(session, event, head)) < 0) {
      pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n",
	     head, event->header.size, event->header.type);
      err = -EINVAL;
      goto out_err;
 }

This occurred in the FINISHED_ROUND event when it has to process some
10000 entries and ran out of memory.

This patch indicates the root cause and displays it in the status line
of ther perf report GUI.

Output before (on GUI status line):

  0xf4198 [0x8]: failed to process type: 68

Output after:

  0xf4198 [0x8]: failed to process type: 68 [not enough memory]

Committer notes:

the 'skip' variable needs to be initialized to -EINVAL, so that when the
size is less than sizeof(struct perf_event_attr) we avoid this valid
compiler warning:

  util/session.c: In function ‘perf_session__process_events’:
  util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
     err = skip;
     ~~~~^~~~~~
  util/session.c:1874:6: note: ‘skip’ was declared here
    s64 skip;
        ^~~~
  cc1: all warnings being treated as errors
Signed-off-by: default avatarThomas Richter <tmricht@linux.ibm.com>
Reviewed-by: default avatarHendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: default avatarJiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      167e418f
    • Arnaldo Carvalho de Melo's avatar
      perf bench numa: Add define for RUSAGE_THREAD if not present · bf561d3c
      Arnaldo Carvalho de Melo authored 
      While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:

      CC       /tmp/build/perf/bench/numa.o
  bench/numa.c: In function ‘worker_thread’:
  bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
    getrusage(RUSAGE_THREAD, &rusage);
              ^~~~~~~~~~~~~
              SIGEV_THREAD
  bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in

[perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
[perfbuilder@60d5802468f6 perf]$

Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.

So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.

So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.

Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      bf561d3c
    • Leo Yan's avatar
      tools lib traceevent: Change tag string for error · 5f05182f
      Leo Yan authored 
      The traceevent lib is used by the perf tool, and when executing

  perf test -v 6

it outputs error log on the ARM64 platform:

  running test 33 '*:*'trace-cmd: No such file or directory

  [...]

  trace-cmd: Invalid argument

The trace event parsing code originally came from trace-cmd so it keeps
the tag string "trace-cmd" for errors, this easily introduces the
impression that the perf tool launches trace-cmd command for trace event
parsing, but in fact the related parsing is accomplished by the
traceevent lib.

This patch changes the tag string to "libtraceevent" so that we can
avoid confusion and let users to more easily connect the error with
traceevent lib.
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
Acked-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190424013802.27569-1-leo.yan@linaro.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      5f05182f
    • Thadeu Lima de Souza Cascardo's avatar
      perf annotate: Fix build on 32 bit for BPF annotation · 01e985e9
      Thadeu Lima de Souza Cascardo authored 
      Commit 6987561c ("perf annotate: Enable annotation of BPF programs") adds
support for BPF programs annotations but the new code does not build on 32-bit.
Signed-off-by: default avatarThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Fixes: 6987561c ("perf annotate: Enable annotation of BPF programs")
Link: http://lkml.kernel.org/r/20190403194452.10845-1-cascardo@canonical.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      01e985e9
    • Arnaldo Carvalho de Melo's avatar
      tools uapi x86: Sync vmx.h with the kernel · 24e45b49
      Arnaldo Carvalho de Melo authored 
      To pick up the changes from:

  2b27924b ("KVM: nVMX: always use early vmcs check when EPT is disabled")

That causes this object in the tools/perf build process to be rebuilt:

  CC       /tmp/build/perf/arch/x86/util/kvm-stat.o

But it isn't using VMX_ABORT_ prefixed constants, so no change in
behaviour.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
  diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/n/tip-bjbo3zc0r8i8oa0udpvftya6@git.kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      24e45b49
    • Bo YU's avatar
      perf bpf: Return value with unlocking in perf_env__find_btf() · 2e712675
      Bo YU authored 
      In perf_env__find_btf(), we're returning without unlocking
"env->bpf_progs.lock". There may be cause lockdep issue.

Detected by CoversityScan, CID# 1444762:(program hangs(LOCK))
Signed-off-by: default avatarBo YU <tsu.yubo@gmail.com>
Acked-by: default avatarJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 2db7b1e0: (perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf())
Link: http://lkml.kernel.org/r/20190422080138.10088-1-tsu.yubo@gmail.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      2e712675
    • Kim Phillips's avatar
      MAINTAINERS: Include vendor specific files under arch/*/events/* · 1804569d
      Kim Phillips authored 
      Add an explicit subdirectory specification for arch/x86/events/amd to
the MAINTAINERS file, to distinguish it from its parent. This will
produce the correct set of maintainers for the files found therein.
Signed-off-by: default avatarKim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gary Hook <Gary.Hook@amd.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Fixes: 39b0332a ("perf/x86: Move perf_event_amd.c ........... => x86/events/amd/core.c")
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      1804569d
    • Kim Phillips's avatar
      perf/x86/amd: Update generic hardware cache events for Family 17h · 0e3b74e2
      Kim Phillips authored 
      Add a new amd_hw_cache_event_ids_f17h assignment structure set
for AMD families 17h and above, since a lot has changed.  Specifically:

L1 Data Cache

The data cache access counter remains the same on Family 17h.

For DC misses, PMCx041's definition changes with Family 17h,
so instead we use the L2 cache accesses from L1 data cache
misses counter (PMCx060,umask=0xc8).

For DC hardware prefetch events, Family 17h breaks compatibility
for PMCx067 "Data Prefetcher", so instead, we use PMCx05a "Hardware
Prefetch DC Fills."

L1 Instruction Cache

PMCs 0x80 and 0x81 (32-byte IC fetches and misses) are backward
compatible on Family 17h.

For prefetches, we remove the erroneous PMCx04B assignment which
counts how many software data cache prefetch load instructions were
dispatched.

LL - Last Level Cache

Removing PMCs 7D, 7E, and 7F assignments, as they do not exist
on Family 17h, where the last level cache is L3.  L3 counters
can be accessed using the existing AMD Uncore driver.

Data TLB

On Intel machines, data TLB accesses ("dTLB-loads") are assigned
to counters that count load/store instructions retired.  This
is inconsistent with instruction TLB accesses, where Intel
implementations report iTLB misses that hit in the STLB.

Ideally, dTLB-loads would count higher level dTLB misses that hit
in lower level TLBs, and dTLB-load-misses would report those
that also missed in those lower-level TLBs, therefore causing
a page table walk.  That would be consistent with instruction
TLB operation, remove the redundancy between dTLB-loads and
L1-dcache-loads, and prevent perf from producing artificially
low percentage ratios, i.e. the "0.01%" below:

        42,550,869      L1-dcache-loads
        41,591,860      dTLB-loads
             4,802      dTLB-load-misses          #    0.01% of all dTLB cache hits
         7,283,682      L1-dcache-stores
         7,912,392      dTLB-stores
               310      dTLB-store-misses

On AMD Families prior to 17h, the "Data Cache Accesses" counter is
used, which is slightly better than load/store instructions retired,
but still counts in terms of individual load/store operations
instead of TLB operations.

So, for AMD Families 17h and higher, this patch assigns "dTLB-loads"
to a counter for L1 dTLB misses that hit in the L2 dTLB, and
"dTLB-load-misses" to a counter for L1 DTLB misses that caused
L2 DTLB misses and therefore also caused page table walks.  This
results in a much more accurate view of data TLB performance:

        60,961,781      L1-dcache-loads
             4,601      dTLB-loads
               963      dTLB-load-misses          #   20.93% of all dTLB cache hits

Note that for all AMD families, data loads and stores are combined
in a single accesses counter, so no 'L1-dcache-stores' are reported
separately, and stores are counted with loads in 'L1-dcache-loads'.

Also note that the "% of all dTLB cache hits" string is misleading
because (a) "dTLB cache": although TLBs can be considered caches for
page tables, in this context, it can be misinterpreted as data cache
hits because the figures are similar (at least on Intel), and (b) not
all those loads (technically accesses) technically "hit" at that
hardware level.  "% of all dTLB accesses" would be more clear/accurate.

Instruction TLB

On Intel machines, 'iTLB-loads' measure iTLB misses that hit in the
STLB, and 'iTLB-load-misses' measure iTLB misses that also missed in
the STLB and completed a page table walk.

For AMD Family 17h and above, for 'iTLB-loads' we replace the
erroneous instruction cache fetches counter with PMCx084
"L1 ITLB Miss, L2 ITLB Hit".

For 'iTLB-load-misses' we still use PMCx085 "L1 ITLB Miss,
L2 ITLB Miss", but set a 0xff umask because without it the event
does not get counted.

Branch Predictor (BPU)

PMCs 0xc2 and 0xc3 continue to be valid across all AMD Families.

Node Level Events

Family 17h does not have a PMCx0e9 counter, and corresponding counters
have not been made available publicly, so for now, we mark them as
unsupported for Families 17h and above.

Reference:

  "Open-Source Register Reference For AMD Family 17h Processors Models 00h-2Fh"
  Released 7/17/2018, Publication #56255, Revision 3.03:
  https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf

[ mingo: tidied up the line breaks. ]
Signed-off-by: default avatarKim Phillips <kim.phillips@amd.com>
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Fixes: e40ed154 ("perf/x86: Add perf support for AMD family-17h processors")
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      0e3b74e2
  3. 01 May, 2019 7 commits
  5. 30 Apr, 2019 4 commits
  7. 29 Apr, 2019 5 commits
    • Linus Torvalds's avatar
      Merge tag 'seccomp-v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux · 83a50840
      Linus Torvalds authored 
      Pull seccomp fixes from Kees Cook:
 "Syzbot found a use-after-free bug in seccomp due to flags that should
  not be allowed to be used together.

  Tycho fixed this, I updated the self-tests, and the syzkaller PoC has
  been running for several days without triggering KASan (before this
  fix, it would reproduce). These patches have also been in -next for
  almost a week, just to be sure.

   - Add logic for making some seccomp flags exclusive (Tycho)

   - Update selftests for exclusivity testing (Kees)"

* tag 'seccomp-v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Make NEW_LISTENER and TSYNC flags exclusive
  selftests/seccomp: Prepare for exclusive seccomp flags
      83a50840
    • Linus Torvalds's avatar
      x86: make ZERO_PAGE() at least parse its argument · 80871482
      Linus Torvalds authored 
      This doesn't really do anything, but at least we now parse teh
ZERO_PAGE() address argument so that we'll catch the most obvious errors
in usage next time they'll happen.

See commit 6a5c5d26 ("rdma: fix build errors on s390 and MIPS due to
bad ZERO_PAGE use") what happens when we don't have any use of the macro
argument at all.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      80871482
    • Linus Torvalds's avatar
      rdma: fix build errors on s390 and MIPS due to bad ZERO_PAGE use · 6a5c5d26
      Linus Torvalds authored 
      The parameter to ZERO_PAGE() was wrong, but since all architectures
except for MIPS and s390 ignore it, it wasn't noticed until 0-day
reported the build error.

Fixes: 67f269b3 ("RDMA/ucontext: Fix regression with disassociate")
Cc: stable@vger.kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6a5c5d26
    • Paulo Alcantara's avatar
      selinux: use kernel linux/socket.h for genheaders and mdp · dfbd199a
      Paulo Alcantara authored 
      When compiling genheaders and mdp from a newer host kernel, the
following error happens:

    In file included from scripts/selinux/genheaders/genheaders.c:18:
    ./security/selinux/include/classmap.h:238:2: error: #error New
    address family defined, please update secclass_map.  #error New
    address family defined, please update secclass_map.  ^~~~~
    make[3]: *** [scripts/Makefile.host:107:
    scripts/selinux/genheaders/genheaders] Error 1 make[2]: ***
    [scripts/Makefile.build:599: scripts/selinux/genheaders] Error 2
    make[1]: *** [scripts/Makefile.build:599: scripts/selinux] Error 2
    make[1]: *** Waiting for unfinished jobs....

Instead of relying on the host definition, include linux/socket.h in
classmap.h to have PF_MAX.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarPaulo Alcantara <paulo@paulo.ac>
Acked-by: default avatarStephen Smalley <sds@tycho.nsa.gov>
[PM: manually merge in mdp.c, subject line tweaks]
Signed-off-by: default avatarPaul Moore <paul@paul-moore.com>
      dfbd199a
    • Linus Torvalds's avatar
      Linux 5.1-rc7 · 37624b58
      Linus Torvalds authored
      37624b58
  9. 28 Apr, 2019 6 commits
    • Jan Kara's avatar
      fsnotify: Fix NULL ptr deref in fanotify_get_fsid() · b1da6a51
      Jan Kara authored 
      fanotify_get_fsid() is reading mark->connector->fsid under srcu. It can
happen that it sees mark not fully initialized or mark that is already
detached from the object list. In these cases mark->connector
can be NULL leading to NULL ptr dereference. Fix the problem by
being careful when reading mark->connector and check it for being NULL.
Also use WRITE_ONCE when writing the mark just to prevent compiler from
doing something stupid.

Reported-by: syzbot+15927486a4f1bfcbaf91@syzkaller.appspotmail.com
Fixes: 77115225 ("fanotify: cache fsid in fsnotify_mark_connector")
Signed-off-by: default avatarJan Kara <jack@suse.cz>
      b1da6a51
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm · 9520b532
      Linus Torvalds authored 
      Pull ARM fixes from Russell King:
 "A small number of ARM fixes

   - Fix function tracer and unwinder dependencies so that we don't end
     up building kernels that will crash

   - Fix ARMv7M nommu initialisation (missing register initialisation)

   - Fix EFI decompressor entry (ensuring barrier instructions are
     enabled prior to use)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache
  ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled
  ARM: fix function graph tracer and unwinder dependencies
      9520b532
    • Linus Torvalds's avatar
      Merge tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · 0d82044e
      Linus Torvalds authored 
      Pull powerpc fixes from Michael Ellerman:
 "A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We
  use some of the hugetlb inlines (eg. pud_huge()) when operating on the
  linear mapping and if they're compiled into empty wrappers we can
  corrupt memory.

  Then two fixes to our VFIO IOMMU code. The first is not a regression
  but fixes the locking to avoid a user-triggerable deadlock.

  The second does fix a regression since rc1, and depends on the first
  fix. It makes it possible to run guests with large amounts of memory
  again (~256GB).

  Thanks to Alexey Kardashevskiy"

* tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm_iommu: Allow pinning large regions
  powerpc/mm_iommu: Fix potential deadlock
  powerpc/mm/radix: Make Radix require HUGETLB_PAGE
      0d82044e
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20190428' of git://git.kernel.dk/linux-block · 975a0f40
      Linus Torvalds authored 
      Pull block fixes from Jens Axboe:
 "A set of io_uring fixes that should go into this release. In
  particular, this contains:

   - The mutex lock vs ctx ref count fix (me)

   - Removal of a dead variable (me)

   - Two race fixes (Stefan)

   - Ring head/tail condition fix for poll full SQ detection (Stefan)"

* tag 'for-linus-20190428' of git://git.kernel.dk/linux-block:
  io_uring: remove 'state' argument from io_{read,write} path
  io_uring: fix poll full SQ detection
  io_uring: fix race condition when sq threads goes sleeping
  io_uring: fix race condition reading SQ entries
  io_uring: fail io_uring_register(2) on a dying io_uring instance
      975a0f40
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma · 14f974d7
      Linus Torvalds authored 
      Pull rdma fixes from Jason Gunthorpe:
 "One core bug fix and a few driver ones

   - FRWR memory registration for hfi1/qib didn't work with with some
     iovas causing a NFSoRDMA failure regression due to a fix in the NFS
     side

   - A command flow error in mlx5 allowed user space to send a corrupt
     command (and also smash the kernel stack we've since learned)

   - Fix a regression and some bugs with device hot unplug that was
     discovered while reviewing Andrea's patches

   - hns has a failure if the user asks for certain QP configurations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Bugfix for mapping user db
  RDMA/ucontext: Fix regression with disassociate
  RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
  RDMA/mlx5: Do not allow the user to write to the clock page
  IB/mlx5: Fix scatter to CQE in DCT QP creation
  IB/rdmavt: Fix frwr memory registration
      14f974d7
    • Linus Torvalds's avatar
      Merge tag 'dmaengine-fix-5.1-rc7' of git://git.infradead.org/users/vkoul/slave-dma · 72a6e35d
      Linus Torvalds authored 
      Pull dmaengine fixes from Vinod Koul:

 - fix for wrong register use in mediatek driver

 - fix in sh driver for glitch is tx_status and treating 0 a valid
   residue for cyclic

 - fix in bcm driver for using right memory allocation flag

* tag 'dmaengine-fix-5.1-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mediatek-cqdma: fix wrong register usage in mtk_cqdma_start
  dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
  dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
  dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg
      72a6e35d
  11. 27 Apr, 2019 7 commits
  13. 26 Apr, 2019 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7