- 26 Apr, 2019 38 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/nfc/st95hf/core.c: In function 'st95hf_irq_thread_handler': drivers/nfc/st95hf/core.c:786:26: warning: variable 'nfcddev' set but not used [-Wunused-but-set-variable] drivers/nfc/st95hf/core.c:784:17: warning: variable 'dev' set but not used [-Wunused-but-set-variable] They are never used since introduction in commit cab47333 ("NFC: Add STMicroelectronics ST95HF driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
I forgot to remove one rcu_read_unlock() before a return statement. Joy of mixing goto and return styles in a function :) Fixes: 4109a2c3 ("tipc: tipc_udp_recv() cleanup vs rcu verbs") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Heiner Kallweit authored
PHY's behave differently when being reset. Some reset registers to defaults, some don't. Some trigger an autoneg restart, some don't. So let's also set the autoneg restart bit when resetting. Then PHY behavior should be more consistent. Clearing BMCR_ISOLATE serves the same purpose and is borrowed from genphy_restart_aneg. BMCR holds the speed / duplex settings in fixed mode. Therefore we may have an issue if a soft reset resets BMCR to its default. So better call genphy_setup_forced() afterwards in fixed mode. We've seen no related complaint in the last >10 yrs, so let's treat it as an improvement. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Guenter Roeck authored
All Apple products use the same protocol for tethering over USB. To simplify the code and make it future proof, use USB_VENDOR_AND_INTERFACE_INFO() instead of USB_DEVICE_AND_INTERFACE_INFO() to automatically detect and support all existing and future Apple products using the same interface. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
David Ahern authored
fib6_result is not initialized in bpf_ipv6_fib_lookup and potentially passses garbage to the fib lookup which triggers a KASAN warning: [ 262.055450] ================================================================== [ 262.057640] BUG: KASAN: user-memory-access in fib6_rule_suppress+0x4b/0xce [ 262.059488] Read of size 8 at addr 00000a20000000b0 by task swapper/1/0 [ 262.061238] [ 262.061673] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.1.0-rc5+ #56 [ 262.063493] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 [ 262.065593] Call Trace: [ 262.066277] <IRQ> [ 262.066848] dump_stack+0x7e/0xbb [ 262.067764] kasan_report+0x18b/0x1b5 [ 262.069921] __asan_load8+0x7f/0x81 [ 262.070879] fib6_rule_suppress+0x4b/0xce [ 262.071980] fib_rules_lookup+0x275/0x2cd [ 262.073090] fib6_lookup+0x119/0x218 [ 262.076457] bpf_ipv6_fib_lookup+0x39d/0x664 ... Initialize fib6_result to 0. Fixes: b1d40991 ("ipv6: Rename fib6_multipath_select and pass fib6_result") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, refactor code a bit and mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/broadcom/cnic.c: In function ‘cnic_cm_process_kcqe’: drivers/net/ethernet/broadcom/cnic.c:4044:11: warning: this statement may fall through [-Wimplicit-fallthrough=] opcode = L4_KCQE_OPCODE_VALUE_CLOSE_COMP; drivers/net/ethernet/broadcom/cnic.c:4050:2: note: here case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c: In function ‘fwevtq_handler’: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:520:7: warning: this statement may fall through [-Wimplicit-fallthrough=] cpl = (void *)p; ~~~~^~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:524:2: note: here case CPL_SGE_EGR_UPDATE: { ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: In file included from drivers/net/wimax/i2400m/debug-levels.h:30, from drivers/net/wimax/i2400m/control.c:86: drivers/net/wimax/i2400m/control.c: In function ‘i2400m_report_tlv_system_state’: ./include/linux/wimax/debug.h:200:4: warning: this statement may fall through [-Wimplicit-fallthrough=] do { \ ^ ./include/linux/wimax/debug.h:404:36: note: in expansion of macro ‘_d_printf’ #define d_printf(l, _dev, f, a...) _d_printf(l, "", _dev, f, ## a) ^~~~~~~~~ drivers/net/wimax/i2400m/control.c:354:3: note: in expansion of macro ‘d_printf’ d_printf(1, dev, "entering BS-negotiated idle mode\n"); ^~~~~~~~ drivers/net/wimax/i2400m/control.c:355:2: note: here case I2400M_SS_DISCONNECTING: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function ‘xgbe_set_hwtstamp_settings’: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1614:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1616:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: ^~~~ In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1625:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1627:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: ^~~~ In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1636:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1638:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comments are modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
Add missing break statement in order to prevent the code from falling through to cases SIOCGSTAMP_NEW and SIOCGSTAMPNS_NEW. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 0768e170 ("net: socket: implement 64-bit timestamps") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-04-25 please apply one more patch series for qeth to net-next. Nothing special, just a bunch of cleanups. ==================== Signed-off-by: -
Julian Wiedmann authored
When building the L3 HW header for non-IP packets, trust the cast type that was passed as parameter. qeth_l3_get_cast_type() has most likely also used h_dest to determine the cast type, so we get the same result, and can remove that duplicated code. In the unlikely case that we would get a _different_ cast type, then that's based off a route lookup and should be considered authoritative. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
This de-duplicates the L2 and L3 cast-type code, and makes the L2 code a bit more robust by removing the fragile assumption that skb->data always points to the Ethernet Header. This would break in code paths where we pushed the HW header onto the skb. Signed-off-by:
-
Julian Wiedmann authored
The QETH_MAX_BUFFER_ELEMENTS() macro effectively returns a constant value. To avoid some redundant pointer chasing and computations in the xmit hot path, cache this value in the queue struct. Take this as opportunity to shrink some of the queue struct's fields to their appropriate value range, slightly reducing its total size. Signed-off-by:
-
Julian Wiedmann authored
On the first initialization of a queue, its Output Buffers are in a clean state with no attached resources. On every subsequent initialization, qeth_l?_stop_card() has previously put them in a clean state via qeth_drain_output_queues(). So the call to qeth_clear_output_buffer() is redundant and can be removed. While at it, move the initialization of the queue's card pointer into the queue allocation. It never changes afterwards. Signed-off-by:
-
Julian Wiedmann authored
We have helper macros for all possible device types, replace all remaining open-coded accesses to the type fields. Signed-off-by:
-
Julian Wiedmann authored
We don't keep track of Input Buffer states, so remove the comments that make it sound like the qeth_qdio_buffer_states enum applies to Input Buffers. Signed-off-by:
-
Julian Wiedmann authored
It's unclear what exact purpose this seqno may have served in the past. But it's certainly no longer used anymore, as the following napi_gro_receive() will straight away clear this part of the cb again. Suggested-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
clang produces a harmless warning for each use for the qeth_adp_supported macro: drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion] if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported' qeth_is_ipa_supported(&c->options.adp, f) ~~~~~~~~~~~~~~~~~~~~~ ^ Add a version of this macro that uses the correct types, and remove the unused qeth_adp_enabled() macro that has the same problem. Reviewed-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== netdevsim: implement proper device model Currently the model of netdevsim is a bit odd in multiple ways. 1) devlink instance is not in any way related with actual netdevsim netdevices. Instead, it is created per-namespace. 2) multi-port netdevsim device is done using "link" attribute. 3) netdevsim bus is there only to have something to bind the netdev to, it really does not act as a bus. 4) netdevsim instances are created by "ip link add" which is great for soft devices with no hw backend. The rtnl core allocates netdev and calls into driver holding rtnl mutex. For hw-backed devices, this flow is wrong as it breaks order in which things are done. This patchset adjust netdevsim to fix all above. In order to support proper devlink and devlink port instances and to be able to emulate real devices, there is need to implement bus probe and instantiate everything from there. User can specify device id and port count to be instantianted. For example: $ echo "10 4" > /sys/bus/netdevsim/new_device Then devlink shows this: $ devlink dev netdevsim/netdevsim10 $ devlink port netdevsim/netdevsim10/0: type eth netdev eni0np1 flavour physical netdevsim/netdevsim10/1: type eth netdev eni0np2 flavour physical netdevsim/netdevsim10/2: type eth netdev eni0np3 flavour physical netdevsim/netdevsim10/3: type eth netdev eni0np4 flavour physical There is possible to add and delete ports using their indexes during netdevsim device lifetime like this: Then devlink shows this: $ devlink port netdevsim/netdevsim10/1: type eth netdev eni10np2 flavour physical netdevsim/netdevsim10/2: type eth netdev eni10np3 flavour physical netdevsim/netdevsim10/3: type eth netdev eni10np4 flavour physical netdevsim/netdevsim10/43: type eth netdev eni10np44 flavour physical Debugfs topology is also adjusted a bit. The rest stays the same as before. Udev bits are merged un systemd upstream git: https://github.com/systemd/systemd/commit/eaa9d507d85509c8bf727356e3884ec54b0fc646 See individual patches for changelog. ==================== Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jiri Pirko authored
Implement ndo_get_devlink_port and allow switch_id and port_name to be handled by devlink. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by:
-
Jiri Pirko authored
In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by:
-
Jiri Pirko authored
Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by:
-
Jiri Pirko authored
With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by:
-
Jiri Pirko authored
Current implementation of parent_id/switch_id does not follow the original idea of being unique. The values are "0", "1", etc. Instead of that, generate 32 random bytes. Signed-off-by:
-
Jiri Pirko authored
As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by:
-
Jiri Pirko authored
These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by:
-
Jiri Pirko authored
Add a way to add new netdevsim device on netdevsim bus and also to delete existing netdevsim device from the bus. Track the bus devices in using a list. Signed-off-by:
-
Jiri Pirko authored
Instead of increments of u32 value, use ida to manage bus device ids. Signed-off-by:
-
Jiri Pirko authored
In order to bus probing to work correctly, register a simple netdevsim driver implementation. Signed-off-by:
-
Jiri Pirko authored
Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by:
-
Jiri Pirko authored
As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by:
-
Jiri Pirko authored
The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by:
-
Jiri Pirko authored
Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by:
-
Jiri Pirko authored
As a dependency of the subsequent patch, mode device registration to be done earlier, directly in nsim_newlink(). Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-04-25 Here's the main bluetooth-next pull request for the 5.2 kernel. - Added support for Mediatek SDIO controllers - Added support for Broadcom BCM2076B1 UART controller - Added support for Marvel SD8987 chipset - Fix buffer overflow bug in hidp protocol - Various other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Two easy cases of overlapping changes. Signed-off-by:
-
- 25 Apr, 2019 1 commit
-
-
Marcel Holtmann authored
The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
-
- 24 Apr, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just the usual assortment of small'ish fixes: 1) Conntrack timeout is sometimes not initialized properly, from Alexander Potapenko. 2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid undefined behavior. From ZhangXiaoxu. 3) des1 field of descriptor in stmmac driver is initialized with the wrong variable. From Yue Haibing. 4) Increase mlxsw pci sw reset timeout a little bit more, from Ido Schimmel. 5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng. 6) Fallback refcount fix in TLS code, from Jakub Kicinski. 7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy. 8) Fix recursive locking in team driver, from Hangbin Liu. 9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski. 10) Don't use napi_alloc_frag() outside of softiq context of socionext driver, from Ilias Apalodimas. 11) MAC address increment overflow in ncsi, from Tao Ren. 12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun. 13) ipv4_link_failure has to validate the headers that are actually there because RAW sockets can pass in arbitrary garbage, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add sanity checks in ipv4_link_failure() net/rose: fix unbound loop in rose_loopback_timer() rxrpc: fix race condition in rxrpc_input_packet() net: rds: exchange of 8K and 1M pool net: vrf: Fix operation not supported when set vrf mac net/ncsi: handle overflow when incrementing mac address net: socionext: replace napi_alloc_frag with the netdev variant on init net: atheros: fix spelling mistake "underun" -> "underrun" spi: ST ST95HF NFC: declare missing of table spi: Micrel eth switch: declare missing of table net: stmmac: move stmmac_check_ether_addr() to driver probe netfilter: fix nf_l4proto_log_invalid to log invalid packets netfilter: never get/set skb->tstamp netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK dt-bindings: add an explanation for internal phy-mode net/tls: don't leak IV and record seq when offload fails net/tls: avoid potential deadlock in tls_set_device_offload_rx() selftests/net: correct the return value for run_afpackettests team: fix possible recursive locking when add slaves ...
-
