- 15 Oct, 2019 8 commits
-
-
Miquel Raynal authored
The chips have a 'start conversion' and a 'end of conversion' pair of pins. They can be used but this is absolutely not mandatory as regular polling is supported by the chip depending on its internal clocking setup. There is no physical reason to force the use of interrupts so turn them optional. Also, once the interrupt turned optional, these devices fit perfectly the "trivial devices" described in the generic (yaml) bindings file, so instead of converting this text file to json schema, we can just add the relevant compatibles in: Documentation/devicetree/bindings/trivial-devices.yaml. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Miquel Raynal authored
Maxim's max12xx series is very similar to the max10xx series, with the difference of the measurements depth which is upgraded from 10 to 12 bits per channel. Everything else looks the same. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Miquel Raynal authored
Maxim's max1027/29/31 series returns the measured voltages with a resolution of 10 bits. There is a very similar series, max1227/29/31 which works identically but uses a resolution of 12 bits. Prepare the support for these chips by turning the 'depth' into a macro parameter instead of hardcoding it everywhere. Also reorganize just a bit the macros at the top to avoid repeating tens of lines when adding support for a new chip. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Miquel Raynal authored
All the registers are configured by the driver, let's reset the chip at probe time, avoiding any conflict with a possible earlier configuration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Miquel Raynal authored
The chip has a 'start conversion' and a 'end of conversion' pair of pins. They can be used but this is absolutely not mandatory as regular polling of the value is totally fine with the current internal clocking setup. Turn the interrupts optional and do not error out if they are not inquired in the device tree. This has the effect to prevent triggered buffers use though. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Miquel Raynal authored
Until now, only write operations were supported. Force two bytes read operation when reading, which should fit most of the development purposes. Of course, extended operations like buffered reads on multiple channels or even temperature + voltage reads will not be read entirely. Usually, just starting a new operation will work but in any case a software reset (done through the debufs interface too) will return the device in a usable state. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Manivannan Sadhasivam authored
Add initial support for Analog Devices ADUX1020 Photometric sensor. Only proximity mode has been enabled for now. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Manivannan Sadhasivam authored
Add devicetree binding for Analog Devices ADUX1020 Photometric sensor. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 14 Oct, 2019 14 commits
-
-
Jérôme Pouiller authored
array_index_nospec() should be applied after a bound check. Fixes: 9bca45f3 ("staging: wfx: allow to send 802.11 frames") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191011164746.2518-1-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Since wfx_tx_get_raw_link_id() return an unsigned, it makes no sense to return a negative value. "15" is a better value since it is used by firmware for stations that have not yet associated link-ids. Note that this should never happens since driver set max_ap_assoc_sta to 14. Fixes: 9bca45f3 ("staging: wfx: allow to send 802.11 frames") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191011101639.31025-1-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Use the DIV_ROUND_UP macro to replace open-coded divisor calculation to improve readability. Issue found using coccinelle: @@ expression n,d; @@ ( - ((n + d - 1) / d) + DIV_ROUND_UP(n,d) | - ((n + (d - 1)) / d) + DIV_ROUND_UP(n,d) ) Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/20191013191027.6470-1-wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Replace open-coded division calculation with the DIV_ROUND_UP helper macro for better readability. Issue found using coccinelle: @@ expression n,d; @@ ( - ((n + d - 1) / d) + DIV_ROUND_UP(n,d) | - ((n + (d - 1)) / d) + DIV_ROUND_UP(n,d) ) Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Link: https://lore.kernel.org/r/20191013184750.32766-1-wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Straube authored
Comparsions evaluate to bool, explicit conversion with ternary operator is overly verbose and unnecessary, so remove it. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20191013131249.34422-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Straube authored
Remove braces from single statement if block to comply with kernel coding style. Reported by checkpatch. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20191013131249.34422-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Remove unnecessary line-breaks in function headers to improve readability of function headers. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Link: https://lore.kernel.org/r/c14b9e60b1e9bab635bc9527cbd2a2a07436ba44.1570918228.git.wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Remove variables that are only used to hold and return constants and have the functions directly return the constants. Issue found by coccinelle: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Link: https://lore.kernel.org/r/f61a0f036af24228c682c6b12c3a8e6cf6736185.1570918228.git.wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Remove addition of new typedef for enum cvmx_fau_op_size. Issue found by checkpatch.pl Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/0130bbbffd4c3c9e0e2ab0fc02cb7fa704ee410c.1570821661.git.wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Removes addition of new typedef declaration for cvmx_pko_command_word0. Also replace previous instances with new union declaration. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/40bb26b250d7ba5b0d5199072e773be2fb0fed90.1570821661.git.wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Remove typedef declaration for enum cvmx_fau_reg_32. Also replace its previous uses with new declaration format. Issue found by checkpatch.pl Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/b7216f423d8e06b2ed7ac2df643a9215cd95be32.1570821661.git.wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Remove declaration of union cvmx_helper_link_info as typedef. Also replace its previous uses with new union declaration. Issue found by checkpatch.pl Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/fb373aed8fd2b04d01198f5a5769fd2476714e88.1570821661.git.wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wambui Karuga authored
Remove typedef declaration from struct cvmx_wqe. Also replace its previous uses with new struct declaration. Issue found by checkpatch.pl Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/fa82104ea8d7ff54dc66bfbfedb6cca541701991.1570821661.git.wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
We want the staging driver fixes in here as well to build on and test with. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 Oct, 2019 18 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Remove lockdown from tracefs itself and moved it to the trace directory. Have the open functions there do the lockdown checks. - Fix a few races with opening an instance file and the instance being deleted (Discovered during the lockdown updates). Kept separate from the clean up code such that they can be backported to stable easier. - Clean up and consolidated the checks done when opening a trace file, as there were multiple checks that need to be done, and it did not make sense having them done in each open instance. - Fix a regression in the record mcount code. - Small hw_lat detector tracer fixes. - A trace_pipe read fix due to not initializing trace_seq" * tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Initialize iter->seq after zeroing in tracing_read_pipe() tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency tracing/hwlat: Report total time spent in all NMIs during the sample recordmcount: Fix nop_mcount() function tracing: Do not create tracefs files if tracefs lockdown is in effect tracing: Add locked_down checks to the open calls of files created for tracefs tracing: Add tracing_check_open_get_tr() tracing: Have trace events system open call tracing_open_generic_tr() tracing: Get trace_array reference for available_tracers files ftrace: Get a reference counter for the trace_array on filter files tracefs: Revert ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down")
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Update/fix inspur-ipsps1 and k10temp Documentation - Fix nct7904 driver - Fix HWMON_P_MIN_ALARM mask in hwmon core * tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: docs: Extend inspur-ipsps1 title underline hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. docs: hwmon: Include 'inspur-ipsps1.rst' into docs hwmon: Fix HWMON_P_MIN_ALARM mask hwmon: (k10temp) Update documentation and add temp2_input info hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Richard Weinberger: "Two fixes for MTD: - spi-nor: Fix for a regression in write_sr() - rawnand: Regression fix for the au1550nd driver" * tag 'fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: au1550nd: Fix au_read_buf16() prototype mtd: spi-nor: Fix direction of the write_sr() transfer
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Single small fix for a regression in the sequence logic for linked commands" * tag 'for-linus-20191012' of git://git.kernel.dk/linux-block: io_uring: fix sequence logic for timeout requests
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of IIO new device support, cleanups and features for the 5.5 cycle Third version with the adis rework set dropped as better to just have a fresh version of that at some future date. The usual mixed backs of new device support being added to drivers, long term reworks continuing and little per driver cleanups and features. Also a few trivial counter subsystem tidy ups on behalf of William. Core new feature * Device label support. A long requested feature no one got around to implementing before. Allows DT based provision of a 'label' that identifies a device uniquely within a system. This differs from existing 'name' which is meant to be the part number. New device support * ingenic-adc - Support for the JZ4770 SoC ADC including bindings. * inv_mpu6050 - Add support for magnetometer in MPU925x parts. Fiddly to do as this is actually a separate device sitting inside the package, but with the master device being able to schedule reads etc. Will only run if the auxiliary bus is not in use for any other devices. Features * ad7192 - Userspace calibration controls to do zero and full scale. * st_lsm6dsx - Enable latched interrupts by default for sensors events with related clear. - Motion events and related wakeup source. This needed quite a bit of refactoring as well. Cleanups and minor features * ad7192 - sysfs ABI docs * ad7949 - Remove code to readback configuration word as driver never actually enabled it. - Fix incorrect xfer length. Not actually known to cause problems other than wasted bus usage. * adis16080 - Replace core mlock usage with local lock with more appropriate scope. * adis16130 - Remove pointless mlock usage. * adis16240 - Remove include of gpio.h as no gpio usage. * atlas-ph-sensor - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * bh1750 - Fix up a static compiler warning and make the code more readable. - yaml conversion of binding + MAINTAINERS entry. * bmp280 - Drop a stray newline. * cm36651 - Drop a redundant assignment * itg3200 - Alignment cleanup. * max31856 - Add missing of_node and parent references, useful to identify the device. * sc27xx_adc - Use devm_hwspin_lock_request_specific rather than local rolled version. * stm32-lptimer counter - kernel-doc warning. * stm32-timer counter - kernel-doc warning. - Alignment cleanup. * sx9500 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * tcs3414 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits) iio: pressure: bmp280: remove stray newline iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position iio: gyro: clean up indentation issue counter: stm32: clean up indentation issue iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions iio: core: Add optional symbolic label to device attributes dt-binding: iio: Add optional label property iio: gyro: adis16080: replace mlock with own lock counter: stm32-lptimer-cnt: fix a kernel-doc warning counter: stm32-timer-cnt: fix a kernel-doc warning iio: gyro: adis16130: remove mlock usage MAINTAINERS: add entry for ROHM BH1750 driver dt-bindings: iio: light: bh1750: convert bindings to yaml iio: imu: st_lsm6dsx: add motion report function and call from interrupt iio: imu: st_lsm6dsx: always enter interrupt thread iio: imu: st_lsm6dsx: add wakeup-source option iio: imu: st_lsm6dsx: add motion events iio: imu: st_lsm6dsx: move interrupt thread to core iio: imu: inv_mpu6050: add fifo support for magnetometer data ...
-
Wambui Karuga authored
Remove comparison to NULL in drivers/staging/rtl8723bs/core/rtw_ap.c:1449. Issue found by checkpatch.pl Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Link: https://lore.kernel.org/r/20191010132058.20887-1-wambui.karugax@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Hennerich authored
For the special case when fbtft_mkdirty() is called with with -1 for the y coordinate, the height is truncated by 1. This isn't required, and causes the last line to not update. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191011112441.31003-1-alexandru.ardelean@analog.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jules Irenge authored
Place the AND logical operator at the end of the previous line; to fix warning of "Logical continuations should be on the previous line". Issue detected by checkpatch tool. Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/20191012151805.17988-1-jbi.octave@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bartosz Golaszewski authored
Remove a stray newline from the probe callback. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Baolin Wang authored
Change to use devm_hwspin_lock_request_specific() to help to simplify the cleanup code for drivers requesting one hwlock. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. The iio_triggered_buffer_predisable() should be called last, to detach the poll func after the devices has been suspended. The position of iio_triggered_buffer_postenable() is correct. Note this is not stable material. It's a fix in the logical model rather fixing an actual bug. These are being tidied up throughout the subsystem to allow more substantial rework that was blocked by variations in how things were done. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Petr Mladek authored
A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The removal of the longjmp code in recordmcount.c mistakenly made the return of make_nop() being negative an exit of nop_mcount(). It should not exit the routine, but instead just not process that part of the code. By exiting with an error code, it would cause the update of recordmcount to fail some files which would fail the build if ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.homeReported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3f1df120 ("recordmcount: Rewrite error/success handling") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
If on boot up, lockdown is activated for tracefs, don't even bother creating the files. This can also prevent instances from being created if lockdown is in effect. Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.comSuggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Added various checks on open tracefs calls to see if tracefs is in lockdown mode, and if so, to return -EPERM. Note, the event format files (which are basically standard on all machines) as well as the enabled_functions file (which shows what is currently being traced) are not lockde down. Perhaps they should be, but it seems counter intuitive to lockdown information to help you know if the system has been modified. Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.comSuggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-