- 17 Aug, 2013 13 commits
-
-
Oleksandr Kozaruk authored
The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC, known also as Phoenix and PhoenixLite. The TWL6030 and TWL6032 have GPADC with 17 and 19 channels respectively. Some channels have current source and are used for measuring voltage drop on resistive load for detecting battery ID resistance, or measuring voltage drop on NTC resistors for external temperature measurements. Some channels measure voltage, (i.e. battery voltage), and have voltage dividers, thus, capable to scale voltage. Some channels are dedicated for measuring die temperature. Some channels are calibrated in 2 points, having offsets from ideal values kept in trim registers. This is used to correct measurements. The differences between GPADC in TWL6030 and TWL6032: - 10 bit vs 12 bit ADC; - 17 vs 19 channels; - channels have different purpose(i.e. battery voltage channel 8 vs channel 18); - trim values are interpreted differently. Based on the driver patched from Balaji TK, Graeme Gregory, Ambresh K, Girish S Ghongdemath. Signed-off-by:
Balaji T K <balajitk@ti.com> Signed-off-by:
Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by:
Oleksandr Kozaruk <oleksandr.kozaruk@ti.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Hector Palacios authored
The LRADC virtual channels have an 18 bit field to store the sum of up to 2^5 accumulated samples. The read_raw function however only operates over a single sample (12 bit resolution). In order to use this field for scaling operations, we need it to be the exact resolution value of the LRADC. Besides, the driver was using an 18 bit mask (LRADC_CH_VALUE_MASK) to report touch coordinates to userland. A 12 bit mask should be used instead or else the touch libraries will expect a coordinates range between 0 and 0x3ffff (18 bits), instead of between 0 and 0xfff (12 bits). Signed-off-by:
Hector Palacios <hector.palacios@digi.com> Acked-by:
Marek Vasut <marex@denx.de> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Sachin Kamat authored
Using devm_iio_device_alloc makes code simpler. Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
-
Peter Meerwald authored
the TI TMP006 is a non-contact temperature sensor with I2C interface; it measures the surface temperature of a distance object using a thermopile to absorb IR energy emitted from the object the sensor has two channels: IR sensor voltage (16-bit) and reference temperature of the chip (14-bit); datasheet is here: http://www.ti.com/lit/ds/symlink/tmp006.pdf v2 (thanks to Grygorii Strashko, Lars-Peter Clausen, Jonathan Cameron for review comments): * power down device on driver remove * use sign_extend32() * style cleanup * add comments what channel raw LSBs mean * spelling of thermopile Signed-off-by:
-
- 16 Aug, 2013 11 commits
-
-
Yann Droneaud authored
Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Instead of macro get_unused_fd(), functions anon_inode_getfd() or get_unused_fd_flags() should be used with flags given by userspace. If not possible, flags should be set to O_CLOEXEC to provide userspace with a default safe behavor. In a further patch, get_unused_fd() will be removed so that new code start using anon_inode_getfd() or get_unused_fd_flags() with correct flags. This patch replaces calls to get_unused_fd() with call to get_unused_fd_flags(O_CLOEXEC) following advice from Erik Gilling. Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Cc: Erik Gilling <konkers@android.com> Cc: Colin Cross <ccross@google.com> Link: http://lkml.kernel.org/r/CACSP8SjXGMk2_kX_+RgzqqQwqKernvF1Wt3K5tw991W5dfAnCA@mail.gmail.com Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yann Droneaud authored
Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Instead of macro get_unused_fd(), functions anon_inode_getfd() or get_unused_fd_flags() should be used with flags given by userspace. If not possible, flags should be set to O_CLOEXEC to provide userspace with a default safe behavor. In a further patch, get_unused_fd() will be removed so that new code start using anon_inode_getfd() or get_unused_fd_flags() with correct flags. This patch replaces calls to get_unused_fd() with call to get_unused_fd_flags(O_CLOEXEC) following advice from Erik Gilling. Signed-off-by:
-
Malcolm Priestley authored
The new structures being typedef struct tagSCTS -> struct vnt_cts typedef struct tagSCTS_FB -> struct vnt_cts_fb These are only needed by rxtc.c so moved to rxtx.h and will eventually form part of the structure of struct vnt_tx_buffer. The linux/ieee80211.h in desc.h is no longer needed. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
The new structures being typedef struct tagSRTS_g -> struct vnt_rts_g typedef struct tagSRTS_g_FB -> struct vnt_rts_g_fb typedef struct tagSRTS_ab -> struct vnt_rts_ab typedef struct tagSRTS_a_FB -> struct vnt_rts_a_fb These are only needed by rxtc.c so moved to rxtx.h and will eventually form part of the structure of struct vnt_tx_buffer. Signed-off-by:
-
Jens Frederich authored
Using an int which is casted to unsigned char as inbuf is messy. The code won't work on big endian systems. The patch should fix this. Signed-off-by:
Jens Frederich <jfrederich@gmail.com> Signed-off-by:
-
Jens Frederich authored
This patch replace some magic numbers. I believe it makes the driver more readable. The magic number 0x26 is the XO system embedded controller (EC) command 'DCON power enable/disable'. Number 0x41, and 0x42 are special memory controller settings register. The 0x41 initialize bit sequence 0x101 means: enable memory power down function and special SDRAM clock delay for synchronize SDRAM output and clock signal. The 0x42 initialize squence 0x101 is wrong. According to the specification Bit 8 is reserved, thus not in use. I removed it. Signed-off-by:
-
Malcolm Priestley authored
Replace with struct vnt_beacon_buffer. Signed-off-by:
-
Malcolm Priestley authored
Move vnt_tx_buffer *pTxBufHead to argument u8 *usbPacketBuf position. Fix the calling to s_bPacketToWirelessUsb so it attached to the calling struct vnt_tx_buffer pTX_Buffer. Signed-off-by:
-
Malcolm Priestley authored
Rename to vnt_tx_buffer. Signed-off-by:
-
Rupesh Gujare authored
We should not use extra variable just to copy pointer value, renaming parameter name serves pupose & removes extra variable. Signed-off-by:
Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by:
-
Rupesh Gujare authored
We are assigning value to hport before returning, there is no need to initialize it. Signed-off-by:
-
- 15 Aug, 2013 1 commit
-
-
Lidza Louina authored
This patch removes the dgnc_proc.c and dgnc_proc.h files and all references to proc functions in dgnc_driver.c. This also removes proc.h from the include headers in driver.c, mgmt.c and sysfs.c and proc.o from the Makefile. Drivers now use sysfs instead of proc. Signed-off-by:
Lidza Louina <lidza.louina@gmail.com> Signed-off-by:
-
- 14 Aug, 2013 15 commits
-
-
Andrew Morton authored
alpha allmodconfig: drivers/staging/comedi/drivers/das16.c: In function 'das16_detach': drivers/staging/comedi/drivers/das16.c:1234: error: implicit declaration of function 'kfree' Cc: Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Malcolm Priestley authored
The return value of uGetRTSCTSDuration always needs to be corrected to a u16 little endian corrected value. Some places the endian correction is done on the next line Change uGetRTSCTSDuration return u16 little endian corrected value. Signed-off-by:
-
Malcolm Priestley authored
A value is only returned when bNeedAck is true. Only when byDurType == DATADUR_B is different. Remove switch statement and simplify with if structure. Signed-off-by:
-
Malcolm Priestley authored
This is part of the Remote NDIS message format with patch vt6656: rxtx.c: s_vGetFreeContext use single tx memset. there is not need for this structure and its members. Signed-off-by:
-
Malcolm Priestley authored
All structure members of BEACON_BUFFER/TX_BUFFER should be packed. Only the first 4 members of these structures are live. The forth member is referenced at run-time by packed structures. typedef struct tagSTxBufHead typedef struct tagSTxShortBufHead in desc.h If these structures are not packed the alignment of these members will be wrong. Signed-off-by:
-
Dan Carpenter authored
This patch separates success & failure block along with fixing following issues:- 1. The way oz_hcd_pd_arrived() looks now it's easy to think we free "ep" but actually we do this spaghetti thing of setting it to NULL on success. 2. It is hard to read it because there are unlocks scattered throughout. 3. Currently we set "ep" to NULL on the success path and then test it and or free it. In current code you have to scroll to the start of the function to read code. Original patch was submitted by Dan here :- http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2013-August/040113.htmlSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Rupesh Gujare authored
Swap arguments of oz_ep_alloc() to match kmalloc() for better readability. Signed-off-by:
-
Rupesh Gujare authored
Remove variable initialization wherever it is not required. Signed-off-by:
-
Rupesh Gujare authored
oz_hcd_pd_departed() takes struct oz_port pointer instead of void *, change function declaration to avoid ambiguity. Reported-by:
-
Rupesh Gujare authored
oz_hcd_pd_arrived returns struct oz_port *, change function declaration to avoid ambiguity. Reported-by:
-
Rupesh Gujare authored
We are already checking "ep" earlier in function. Do not need to check again. Reported-by:
-
Rupesh Gujare authored
Put spaces around math operations. Reported-by:
-
Rupesh Gujare authored
Making code simpler for readability. Reported-by:
-
Rupesh Gujare authored
This patch adds a blank line between global declarations & functions for readability. Signed-off-by:
-
Rupesh Gujare authored
This patch adds blank line between declaration & code for readability. Signed-off-by:
-
