- 20 Feb, 2019 40 commits
-
-
Sergei Trofimovich authored
commit 491af60f upstream. Fix page fault handling code to fixup r16-r18 registers. Before the patch code had off-by-two registers bug. This bug caused overwriting of ps,pc,gp registers instead of fixing intended r16,r17,r18 (see `struct pt_regs`). More details: Initially Dmitry noticed a kernel bug as a failure on strace test suite. Test passes unmapped userspace pointer to io_submit: ```c #include <err.h> #include <unistd.h> #include <sys/mman.h> #include <asm/unistd.h> int main(void) { unsigned long ctx = 0; if (syscall(__NR_io_setup, 1, &ctx)) err(1, "io_setup"); const size_t page_size = sysconf(_SC_PAGESIZE); const size_t size = page_size * 2; void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (MAP_FAILED == ptr) err(1, "mmap(%zu)", size); if (munmap(ptr, size)) err(1, "munmap"); syscall(__NR_io_submit, ctx, 1, ptr + page_size); syscall(__NR_io_destroy, ctx); return 0; } ``` Running this test causes kernel to crash when handling page fault: ``` Unable to handle kernel paging request at virtual address ffffffffffff9468 CPU 3 aio(26027): Oops 0 pc = [<fffffc00004eddf8>] ra = [<fffffc00004edd5c>] ps = 0000 Not tainted pc is at sys_io_submit+0x108/0x200 ra is at sys_io_submit+0x6c/0x200 v0 = fffffc00c58e6300 t0 = fffffffffffffff2 t1 = 000002000025e000 t2 = fffffc01f159fef8 t3 = fffffc0001009640 t4 = fffffc0000e0f6e0 t5 = 0000020001002e9e t6 = 4c41564e49452031 t7 = fffffc01f159c000 s0 = 0000000000000002 s1 = 000002000025e000 s2 = 0000000000000000 s3 = 0000000000000000 s4 = 0000000000000000 s5 = fffffffffffffff2 s6 = fffffc00c58e6300 a0 = fffffc00c58e6300 a1 = 0000000000000000 a2 = 000002000025e000 a3 = 00000200001ac260 a4 = 00000200001ac1e8 a5 = 0000000000000001 t8 = 0000000000000008 t9 = 000000011f8bce30 t10= 00000200001ac440 t11= 0000000000000000 pv = fffffc00006fd320 at = 0000000000000000 gp = 0000000000000000 sp = 00000000265fd174 Disabling lock debugging due to kernel taint Trace: [<fffffc0000311404>] entSys+0xa4/0xc0 ``` Here `gp` has invalid value. `gp is s overwritten by a fixup for the following page fault handler in `io_submit` syscall handler: ``` __se_sys_io_submit ... ldq a1,0(t1) bne t0,4280 <__se_sys_io_submit+0x180> ``` After a page fault `t0` should contain -EFALUT and `a1` is 0. Instead `gp` was overwritten in place of `a1`. This happens due to a off-by-two bug in `dpf_reg()` for `r16-r18` (aka `a0-a2`). I think the bug went unnoticed for a long time as `gp` is one of scratch registers. Any kernel function call would re-calculate `gp`. Dmitry tracked down the bug origin back to 2.1.32 kernel version where trap_a{0,1,2} fields were inserted into struct pt_regs. And even before that `dpf_reg()` contained off-by-one error. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-and-reviewed-by:
"Dmitry V. Levin" <ldv@altlinux.org> Cc: stable@vger.kernel.org # v2.1.32+ Bug: https://bugs.gentoo.org/672040Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sandeep Patil authored
commit 27dd768e upstream. The 'pss_locked' field of smaps_rollup was being calculated incorrectly. It accumulated the current pss everytime a locked VMA was found. Fix that by adding to 'pss_locked' the same time as that of 'pss' if the vma being walked is locked. Link: http://lkml.kernel.org/r/20190203065425.14650-1-sspatil@android.com Fixes: 493b0e9d ("mm: add /proc/pid/smaps_rollup") Signed-off-by:
Sandeep Patil <sspatil@android.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Colascione <dancol@google.com> Cc: <stable@vger.kernel.org> [4.14.x, 4.19.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Matti Kurkela authored
commit e8b22d0a upstream. Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by:
Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jonathan Bakker authored
commit 90cc55f0 upstream. Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Xiaoyao Li authored
commit 98ae70cc upstream. Commit ca83b4a7 ("x86/KVM/VMX: Add find_msr() helper function") introduces the helper function find_msr(), which returns -ENOENT when not find the msr in vmx->msr_autoload.guest/host. Correct checking contion of no more available entry in vmx->msr_autoload. Fixes: ca83b4a7 ("x86/KVM/VMX: Add find_msr() helper function") Cc: stable@vger.kernel.org Signed-off-by:
Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Manuel Reinhardt authored
commit 2bc16b9f upstream. The commit a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") introduced an error in the handling of quirks for implicit feedback endpoints. This commit fixes this. If a quirk successfully sets up an implicit feedback endpoint, usb-audio no longer tries to find the implicit fb endpoint itself. Fixes: a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") Signed-off-by:
Manuel Reinhardt <manuel.rhdt@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jurica Vukadin authored
commit 4cd3016c upstream. This enables mute LED support and fixes switching jacks when the laptop is docked. Signed-off-by:
Jurica Vukadin <jurica.vukadin@rt-rk.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jiri Olsa authored
commit 81ec3f3c upstream. Vince (and later on Ravi) reported crashes in the BTS code during fuzzing with the following backtrace: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:perf_prepare_sample+0x8f/0x510 ... Call Trace: <IRQ> ? intel_pmu_drain_bts_buffer+0x194/0x230 intel_pmu_drain_bts_buffer+0x160/0x230 ? tick_nohz_irq_exit+0x31/0x40 ? smp_call_function_single_interrupt+0x48/0xe0 ? call_function_single_interrupt+0xf/0x20 ? call_function_single_interrupt+0xa/0x20 ? x86_schedule_events+0x1a0/0x2f0 ? x86_pmu_commit_txn+0xb4/0x100 ? find_busiest_group+0x47/0x5d0 ? perf_event_set_state.part.42+0x12/0x50 ? perf_mux_hrtimer_restart+0x40/0xb0 intel_pmu_disable_event+0xae/0x100 ? intel_pmu_disable_event+0xae/0x100 x86_pmu_stop+0x7a/0xb0 x86_pmu_del+0x57/0x120 event_sched_out.isra.101+0x83/0x180 group_sched_out.part.103+0x57/0xe0 ctx_sched_out+0x188/0x240 ctx_resched+0xa8/0xd0 __perf_event_enable+0x193/0x1e0 event_function+0x8e/0xc0 remote_function+0x41/0x50 flush_smp_call_function_queue+0x68/0x100 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x3e/0xe0 call_function_single_interrupt+0xf/0x20 </IRQ> The reason is that while event init code does several checks for BTS events and prevents several unwanted config bits for BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows to create BTS event without those checks being done. Following sequence will cause the crash: If we create an 'almost' BTS event with precise_ip and callchains, and it into a BTS event it will crash the perf_prepare_sample() function because precise_ip events are expected to come in with callchain data initialized, but that's not the case for intel_pmu_drain_bts_buffer() caller. Adding a check_period callback to be called before the period is changed via PERF_EVENT_IOC_PERIOD. It will deny the change if the event would become BTS. Plus adding also the limit_period check as well. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190204123532.GA4794@kravaSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ingo Molnar authored
commit 528871b4 upstream. The following commit: 9dff0aa9 ("perf/core: Don't WARN() for impossible ring-buffer sizes") results in perf recording failures with larger mmap areas: root@skl:/tmp# perf record -g -a failed to mmap with 12 (Cannot allocate memory) The root cause is that the following condition is buggy: if (order_base_2(size) >= MAX_ORDER) goto fail; The problem is that @size is in bytes and MAX_ORDER is in pages, so the right test is: if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER) goto fail; Fix it. Reported-by:
"Jin, Yao" <yao.jin@linux.intel.com> Bisected-by:
Borislav Petkov <bp@alien8.de> Analyzed-by:
-
Mauro Ciancio authored
commit 7ad222b3 upstream. This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by:
Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
commit f420c54e upstream. This reverts commit 7db54c89 as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 92a8109e ] The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ilia Mirkin authored
[ Upstream commit a5176a4c ] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 11878006 ] When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447Reported-by:
Thomas Blume <thomas.blume@suse.com> Signed-off-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit df209c43 ] devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b6 ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit b5f03484 ] These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Julien D'Ascenzio <jdascenzio@posteo.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Jamie Lentin <jm@lentin.co.uk> Reported-by:
Julien D'Ascenzio <jdascenzio@posteo.net> Tested-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit c25748ac ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 7fca69d4 ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
-
Liviu Dudau authored
[ Upstream commit cc667f6d ] When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 7923e09c ] The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 51b9e62e ] The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 9a63bd6f ] Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 4d9d54a7 ] PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit adf41098 ] DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 2f661962 ] cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 03fa4838 ] Some kernels, like 4.19.13-300.fc29.x86_64 in fedora 29, fail with the existing probe definition asking for the contents of result->name, working when we ask for the 'filename' variable instead, so add a fallback to that. Now those tests are back working on fedora 29 systems with that kernel: # perf test vfs_getname 65: Use vfs_getname probe to get syscall args filenames : Ok 66: Add vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-klt3n0i58dfqttveti09q3fi@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Chao Fan authored
[ Upstream commit b9ced18a ] The addresses of NUMA nodes are not printed correctly on i386-PAE which is misleading. Here is a debian9-32bit with PAE in a QEMU guest having more than 4G of memory: qemu-system-i386 \ -hda /var/lib/libvirt/images/debian32.qcow2 \ -m 5G \ -enable-kvm \ -smp 10 \ -numa node,mem=512M,nodeid=0,cpus=0 \ -numa node,mem=512M,nodeid=1,cpus=1 \ -numa node,mem=512M,nodeid=2,cpus=2 \ -numa node,mem=512M,nodeid=3,cpus=3 \ -numa node,mem=512M,nodeid=4,cpus=4 \ -numa node,mem=512M,nodeid=5,cpus=5 \ -numa node,mem=512M,nodeid=6,cpus=6 \ -numa node,mem=512M,nodeid=7,cpus=7 \ -numa node,mem=512M,nodeid=8,cpus=8 \ -numa node,mem=512M,nodeid=9,cpus=9 \ -serial stdio Because of the wrong value type, it prints as below: [ 0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled [ 0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled [ 0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled [ 0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled The upper half of the start address of the NUMA domains between 6 and 9 inclusive was cut, so the printed values are incorrect. Fix the value type, to get the correct values in the log as follows: [ 0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled [ 0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled [ 0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled [ 0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled Signed-off-by:
Chao Fan <fanc.fnst@cn.fujitsu.com> [ rjw: Subject & changelog ] Signed-off-by:
-
Daniel Axtens authored
commit 8914a595 upstream If a bnx2x card is passed a GSO packet with a gso_size larger than ~9700 bytes, it will cause a firmware error that will bring the card down: bnx2x: [bnx2x_attn_int_deasserted3:4323(enP24p1s0f0)]MC assert! bnx2x: [bnx2x_mc_assert:720(enP24p1s0f0)]XSTORM_ASSERT_LIST_INDEX 0x2 bnx2x: [bnx2x_mc_assert:736(enP24p1s0f0)]XSTORM_ASSERT_INDEX 0x0 = 0x00000000 0x25e43e47 0x00463e01 0x00010052 bnx2x: [bnx2x_mc_assert:750(enP24p1s0f0)]Chip Revision: everest3, FW Version: 7_13_1 ... (dump of values continues) ... Detect when the mac length of a GSO packet is greater than the maximum packet size (9700 bytes) and disable GSO. Signed-off-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [jwang: cherry pick for CVE-2018-1000026] Signed-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Daniel Axtens authored
commit 2b16f048 upstream If you take a GSO skb, and split it into packets, will the MAC length (L2 + L3 + L4 headers + payload) of those packets be small enough to fit within a given length? Move skb_gso_mac_seglen() to skbuff.h with other related functions like skb_gso_network_seglen() so we can use it, and then create skb_gso_validate_mac_len to do the full calculation. Signed-off-by:
-
Russell King authored
Commit d6951f58 upstream. The intention in the previous patch was to only place the processor tables in the .rodata section if big.Little was being built and we wanted the branch target hardening, but instead (due to the way it was tested) it ended up always placing the tables into the .rodata section. Although harmless, let's correct this anyway. Fixes: 3a4d0c21 ("ARM: ensure that processor vtables is not lost after boot") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David A. Long <dave.long@linaro.org> Reviewed-by:
Julien Thierry <julien.thierry@arm.com> Tested-by:
-
Russell King authored
Commit 3a4d0c21 upstream. Marek Szyprowski reported problems with CPU hotplug in current kernels. This was tracked down to the processor vtables being located in an init section, and therefore discarded after kernel boot, despite being required after boot to properly initialise the non-boot CPUs. Arrange for these tables to end up in .rodata when required. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Fixes: 383fb3ee ("ARM: spectre-v2: per-CPU vtables to work around big.Little systems") Signed-off-by:
-
Russell King authored
Commit 383fb3ee upstream. In big.Little systems, some CPUs require the Spectre workarounds in paths such as the context switch, but other CPUs do not. In order to handle these differences, we need per-CPU vtables. We are unable to use the kernel's per-CPU variables to support this as per-CPU is not initialised at times when we need access to the vtables, so we have to use an array indexed by logical CPU number. We use an array-of-pointers to avoid having function pointers in the kernel's read/write .data section. Reviewed-by:
-
Russell King authored
Commit e209950f upstream. Allow the way we access members of the processor vtable to be changed at compile time. We will need to move to per-CPU vtables to fix the Spectre variant 2 issues on big.Little systems. However, we have a couple of calls that do not need the vtable treatment, and indeed cause a kernel warning due to the (later) use of smp_processor_id(), so also introduce the PROC_TABLE macro for these which always use CPU 0's function pointers. Reviewed-by:
-
Russell King authored
Commit 945aceb1 upstream. Call the per-processor type check_bugs() method in the same way as we do other per-processor functions - move the "processor." detail into proc-fns.h. Reviewed-by:
-
Russell King authored
Commit 65987a85 upstream. Split out the lookup of the processor type and associated error handling from the rest of setup_processor() - we will need to use this in the secondary CPU bringup path for big.Little Spectre variant 2 mitigation. Reviewed-by:
-
Russell King authored
Commit 899a42f8 upstream. Move lookup_processor_type() out of the __init section so it is callable from (eg) the secondary startup code during hotplug. Reviewed-by:
-
Julien Thierry authored
Commit 5df7a99b upstream. In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to itself. It should actually be hwstate->fpinst2 that gets assigned to the ufp_exc field. Fixes commit 3aa2df6e ("ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state"). Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Julien Thierry authored
Commit a1d09e07 upstream. Sanitize user pointer given to __copy_to_user, both for standard version and memcopy version of the user accessor. Signed-off-by:
-
Julien Thierry authored
Commit afaf6838 upstream. Introduce C and asm helpers to sanitize user address, taking the address range they target into account. Use asm helper for existing sanitization in __copy_from_user(). Signed-off-by:
-
Julien Thierry authored
Commit e3aa6243 upstream. When Spectre mitigation is required, __put_user() needs to include check_uaccess. This is already the case for put_user(), so just make __put_user() an alias of put_user(). Signed-off-by:
-
