- 16 Jun, 2021 40 commits
-
-
Wenpeng Liang authored
Fix following format issues: 1. open brace '{' following function definitions should go to the next line. 2. braces {} are not necessary for single line statements. 3. else should follow close brace '}'. Signed-off-by:Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wenpeng Liang authored
There are some space related issues, including spaces at the start of the line, before tabs, after open parenthesis and before close parenthesis. Signed-off-by:
-
Wenpeng Liang authored
There are some repeated words in some comments, they should be deleted. Signed-off-by:
-
Wenpeng Liang authored
Block comments should not use a trailing */ on a separate line and every line of a block comment should start with an '*'. Signed-off-by:
-
Wenpeng Liang authored
Add a blank line after declarations, change the order of them and put the assignments and declarations together. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
Remove the explicit casts in the checksum complement functions and pass the actual protocol specific headers instead. Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Shaokun Zhang authored
Function 'ipc_mmio_get_cp_version' is declared twice, so remove the repeated declaration and wrong comments. Cc: M Chetan Kumar <m.chetan.kumar@intel.com> Cc: Intel Corporation <linuxwwan@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by:
M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by:
-
George McCollister authored
Forward supervision frames between redunant HSR ports. This was broken in the last commit. Fixes: 1a42624a ("net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table") Signed-off-by:
George McCollister <george.mccollister@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Bjorn Andersson authored
The idiomatic way to handle the changelink flags/mask pair seems to be allow partial updates of the driver's link flags. In contrast the rmnet driver masks the incoming flags and then use that as the new flags. Change the rmnet driver to follow the common scheme, before the introduction of IFLA_RMNET_FLAGS handling in iproute2 et al. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Alex Elder <elder@linaro.org> Reviewed-by:
-
George McCollister authored
Don't check the sequence number when deciding when to update time_in in the node table if tag removal is offloaded since the sequence number is part of the tag. This fixes a problem where the times in the node table wouldn't update when 0 appeared to be before or equal to seq_out when tag removal was offloaded. Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 2bb4b98b ("net: stmmac: Add Ingenic SoCs MAC support.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Using eth_zero_addr() to assign zero address insetad of inefficient copy from an array. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: cosa: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
According to the chackpatch.pl, no spaces is necessary at the start of a line, no space is necessary after a cast. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
This patch removes trailing whitespaces. Signed-off-by:
-
Peng Li authored
Add space required before the open parenthesis '(' and '{'. Add space required after that close brace '}' and ',' Add spaces required around that '=' , '&', '*', '|', '+', '/' and '-'. Signed-off-by: -
Peng Li authored
Trailing statements should be on next line. Signed-off-by:
-
Peng Li authored
Alignment should match open parenthesis. Signed-off-by:
-
Peng Li authored
This patch uses the BIT macro for setting individual bits, to fix the following checkpatch.pl issue: CHECK: Prefer using the BIT macro. Signed-off-by:
-
Peng Li authored
Macro argument 'cosa' may be better as '(cosa)' to avoid precedence issues. Signed-off-by:
-
Peng Li authored
This patch removes redundant braces {}, to fix the checkpatch.pl warning: "braces {} are not necessary for single statement blocks". Signed-off-by: -
Peng Li authored
Braces {} should be used on all arms of this statement. Signed-off-by: -
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "!chan->rx_skb". Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as "foo* bar" should be "foo *bar". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
Zou Wei authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Jakub Kicinski authored
There has been a few errors in the ethtool reply size calculations, most of those are hard to trigger during basic testing because of skb size rounding up and netdev names being shorter than max. Add a more precise check. This change will affect the value of payload length displayed in case of -EMSGSIZE but that should be okay, "payload length" isn't a well defined term here. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Maciej Żenczykowski authored
Timewait sockets have included mark since approx 4.18. Cc: Eric Dumazet <edumazet@google.com> Cc: Jon Maxwell <jmaxwell37@gmail.com> Fixes: 00483690 ("tcp: Add mark for TIMEWAIT sockets") Signed-off-by:
Maciej Żenczykowski <maze@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
-
Jiapeng Chong authored
This symbol is not used outside of net.c, so marks it static. Fix the following sparse warning: drivers/net/mhi/net.c:385:23: warning: symbol 'mhi_wwan_ops' was not declared. Should it be static? Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: updates for -next This series includes some optimization in IO path for the HNS3 ethernet driver. ==================== Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Yunsheng Lin authored
Currently rx page will be reused to receive future packet when the stack releases the previous skb quickly. If the old page can not be reused, a new page will be allocated and mapped, which comsumes a lot of cpu when IOMMU is in the strict mode, especially when the application and irq/NAPI happens to run on the same cpu. So allocate a new frag to memcpy the data to avoid the costly IOMMU unmapping/mapping operation, and add "frag_alloc_err" and "frag_alloc" stats in "ethtool -S ethX" cmd. The throughput improves above 50% when running single thread of iperf using TCP when IOMMU is in strict mode and iperf shares the same cpu with irq/NAPI(rx_copybreak = 2048 and mtu = 1500). Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
Current rx page offset only reset to zero when all the below conditions are satisfied: 1. rx page is only owned by driver. 2. rx page is reusable. 3. the page offset that is above to be given to the stack has reached the end of the page. If the page offset is over the hns3_buf_size(), it means the buffer below the offset of the page is usable when the above condition 1 & 2 are satisfied, so page offset can be reset to zero instead of increasing the offset. We may be able to always reuse the first 4K buffer of a 64K page, which means we can limit the hot buffer size as much as possible. The above optimization is a side effect when refacting the rx page reuse handling in order to support the rx copybreak. Signed-off-by:
-
Yunsheng Lin authored
Using the queue based tx buffer, it is also possible to allocate a sgl buffer, and use skb_to_sgvec() to convert the skb to the sgvec in order to support the dma_map_sg() to decreases the overhead of IOMMU mapping and unmapping. Firstly, it reduces the number of buffers. For example, a tcp skb may have a 66-byte header and 3 fragments of 4328, 32768, and 28064 bytes. With this patch, dma_map_sg() will combine them into two buffers, 66-bytes header and one 65160-bytes fragment by using IOMMU. Secondly, it reduces the number of dma mapping and unmapping. All the original 4 buffers are mapped only once rather than 4 times. The throughput improves above 10% when running single thread of iperf using TCP when IOMMU is in strict mode. Suggested-by:
Barry Song <song.bao.hua@hisilicon.com> Signed-off-by:
-
Huazhong Tan authored
Add support to query tx spare buffer size from configuration file, and use this info to do spare buffer initialization when the module parameter 'tx_spare_buf_size' is not specified. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
when the packet or frag size is small, it causes both security and performance issue. As dma can't map sub-page, this means some extra kernel data is visible to devices. On the other hand, the overhead of dma map and unmap is huge when IOMMU is on. So add a queue based tx shared bounce buffer to memcpy the small packet when the len of the xmitted skb is below tx_copybreak. Add tx_spare_buf_size module param to set the size of tx spare buffer, and add set/get_tunable to set or query the tx_copybreak. The throughtput improves from 30 Gbps to 90+ Gbps when running 16 netperf threads with 32KB UDP message size when IOMMU is in the strict mode(tx_copybreak = 2000 and mtu = 1500). Suggested-by:
-
Yunsheng Lin authored
Factor out hns3_fill_desc() so that it can be reused in the tx bounce supporting. Signed-off-by:
-
