- 05 Dec, 2022 29 commits
-
-
Martin Kaiser authored
The OnDisassoc function hasn't got much to do if we're not working as an access point. Move this case out of the large if statement to simplify the code. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20221129205152.128172-5-martin@kaiser.cxSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kaiser authored
Move the update of bBusyTraffic into the else branch. The if branch ends with a return statement, so bBusyTraffic will not be updated in this case. With this change in place, we can reorder the code and save some levels of indentation. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Use the struct ieee80211_mgmt to read the reason code instead of parsing the message manually. Remove the pframe pointer, it's no longer used. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Define a struct ieee80211_mgmt in the OnDisassoc function and use it to parse the addresses in the incoming disassoc message. This replaces some driver-specific functions for address parsing. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Check the result of rtw_check_bcn_info directly and remove the ret variable. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Simplify the code to handle the case where we're associated to a station that is not in our list of known stations. We can simply exit in this case. This patch reverts the if-condition and saves one level of indentation. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
If we cannot allocate a struct wlan_bssid_ex in the OnBeacon function, we should stop processing the incoming beacon message and return. For kmalloc failures, the current code just skips the update of network and beacon info and tries to continue with the authentication. The update would set the encryption algorithm that should be used for the authentication. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Do not process an incoming beacon message in the OnBeacon function if the beacon was sent by a base station other than the one to which we're connected. This patch does not modify the behaviour of the code. It reverts the if condition and returns if the beacon should not be processed. This is simpler than wrapping the entire processing into a large if clause. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The update_sta_support_rate function takes a pointer to information elements and the total length of all these elements. Use our variables for pointer and length instead of calculating them manually. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The update_beacon_info function parses information elements of a beacon message. It should take the pointer to the information elements and their total length, not the entire beacon message. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The process_p2p_ps_ie function parses the information elements of a beacon message and extracts p2p-related info. process_p2p_ps_ie does not receive a pointer to the information elements as one would expect. Instead it receives a pointer to the timestamp field in the beacon message. process_p2p_ps_ie increments this pointer by _BEACON_IE_OFFSET_ to jump to the start of the information elements (and decreases the buffer length accordingly). This is clumsy and hard to understand. Rewrite this such that process_p2p_ps_ie takes a pointer to the information elements and the total length of all elements. Check up-front that the total length is not negative. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Get the source address of a beacon frame from our struct ieee80211_mgmt instead of using the driver's internal GetAddr2Ptr helper. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Read the 64-bit timestamp from struct ieee80211_mgmt instead of parsing the beacon message ourselves. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Define a struct ieee80211_mgmt in the OnBeacon function. Use it to replace one GetAddr3Ptr call. This is a tiny step towards making GetAddr3Ptr obsolete. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Jack Schofield authored
Clean up extra uses of blank lines that do not follow the kernel coding style. Issue reported by checkpatch. Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Jack Schofield <schofija@oregonstate.edu> Link: https://lore.kernel.org/r/51edbcc7583d64d3fe5a203d3a8649a695ef4a75.1669872193.git.schofija@oregonstate.eduSigned-off-by:
-
Jack Schofield authored
Void function return statement is not useful in this case. Issue reported by checkpatch. Reviewed-by:
-
Jack Schofield authored
Declarations are to be followed by a blank line. Add to follow Linux Kernel coding style. Issue reported by checkpatch. Reviewed-by:
-
Martin Kaiser authored
Use ieee80211_has_protected to check if the "protected" bit is set. Remove the r8188eu driver's internal macro for this check. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
In function ap2sta_data_frame, we can use is_zero_ether_addr to check for all-zero ethernet addresses. Both pattrib->bssid and mybssid are 16-bit aligned. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
issue_probereq_ex sends a probe request and retries if this fails. There's no point in making the number of retries configurable. Hard-code the value that's used by issue_probereq_ex's only caller. Simplify the code to check the loop condition only once. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Remove the wait_ms parameter from function issue_probereq_ex. There's only one caller, who requests a waiting time of 1 ms. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The only caller of issue_probereq_ex does not check the return value. We can remove it and make issue_probereq_ex a void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
YueHaibing authored
The skb is delivered to netif_rx() in rtllib_monitor_rx(), which may free it, after calling this, dereferencing skb may trigger use-after-free. Found by Smatch. Fixes: 94a79942 ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20221123081253.22296-1-yuehaibing@huawei.comSigned-off-by:
-
Philipp Hortmann authored
int_log is initialized and incremented but never evaluated. Remove resulting dead code. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/e2edcde052cc3c47e6e6b94d09e460b8cf6a49a8.1669156825.git.philipp.g.hortmann@gmail.comSigned-off-by:
-
Philipp Hortmann authored
ChannelAccessSetting is never used. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
initialized_at_probe is initialized and never used. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
skb_aggQ is initialized, never used and purged. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
AcmMethod is initialized and never changed. The evaluation will always have the same result. Remove resulting dead code. Signed-off-by:
-
Dan Carpenter authored
We cannot dereference the "skb" pointer after calling ieee80211_monitor_rx(), because it is a use after free. Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y33BArx3k/aw6yv/@kiliSigned-off-by:
-
- 22 Nov, 2022 8 commits
-
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-569-uwe@kleine-koenig.orgSigned-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Umang Jain authored
mmal_fmt.remove_padding is defined as a boolean type hence, use boolean values for it instead of 0/1 integers. This enhances code readability. Signed-off-by:
Umang Jain <umang.jain@ideasonboard.com> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20221118084244.199909-4-umang.jain@ideasonboard.comSigned-off-by:
-
Umang Jain authored
In commit 7967656f ("coding-style: Clarify the expectations around bool") the check to dis-allow bool structure members was removed from checkpatch.pl. It promotes bool structure members to store boolean values. This enhances code readability. Signed-off-by:
-
Umang Jain authored
This reverts commit 640e7746. In commit 7967656f ("coding-style: Clarify the expectations around bool") the check to dis-allow bool structure members was removed from checkpatch.pl. It promotes bool structure members to store boolean values. This enhances code readability. Signed-off-by:
-
Brent Pappas authored
Replace the macro GDM_TTY_READY with a static inline function to follow the Linux kernel coding style. Signed-off-by:
Brent Pappas <bpappas@pappasbrent.com> Link: https://lore.kernel.org/r/20221117195443.19616-1-bpappas@pappasbrent.comSigned-off-by:
-
Gaosheng Cui authored
Smatch report warning as follows: drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn: '&entry->list' not removed from list In tsi148_dma_list_add(), the error path "goto err_dma" will not remove entry->list from list->entries, but entry will be freed, then list traversal may cause UAF. Fix by removeing it from list->entries before free(). Fixes: b2383c90 ("vme: tsi148: fix first DMA item mapping") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221117035914.2954454-1-cuigaosheng1@huawei.comSigned-off-by:
-
- 17 Nov, 2022 3 commits
-
-
Philipp Hortmann authored
Rename variable pHTInfo to ht_info to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable InterruptLog to int_log, RxCounter to rx_ctr and bHwRfOffAction to hw_rf_off_action to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable bFilterSourceStationFrame to fltr_src_sta_frame, CCKPresentAttentuation to cck_present_attn and ResetProgress to rst_progress to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
