- 11 Aug, 2015 12 commits
-
-
Arne Fitzenreiter authored
commit 71d126fd upstream. Some devices lose data on TRIM whether queued or not. This patch adds a horkage to disable TRIM. tj: Collapsed unnecessary if() nesting. Signed-off-by:
Arne Fitzenreiter <arne_f@ipfire.org> Signed-off-by:
Tejun Heo <tj@kernel.org> [ luis: backported to 3.16: - dropped changes to show_ata_dev_trim - adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Aleksei Mamlin authored
commit 08c85d2a upstream. Enabling AA on HP 250GB SATA disk VB0250EAVER causes errors: [ 3.788362] ata3.00: failed to enable AA (error_mask=0x1) [ 3.789243] ata3.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. tj: Collected FPDMA_AA entries and updated comment. Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
-
Lior Amsalem authored
commit 945b4744 upstream. This commit adds the necessary quirk to make the Marvell 4140 SATA PMP work properly. This PMP doesn't like SRST on port number 4 (the host port) so this commit marks this port as not supporting SRST. Signed-off-by:
Lior Amsalem <alior@marvell.com> Reviewed-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Antonio Borneo authored
commit 6debce6f upstream. Current implementation of cp2112_raw_event() only accepts one data report at a time. If last received data report is not fully handled yet, a new incoming data report will overwrite it. In such case we don't guaranteed to propagate the correct incoming data. The trivial fix implemented here forces a single report at a time by requesting in cp2112_read() no more than 61 byte of data, which is the payload size of a single data report. Signed-off-by:
Antonio Borneo <borneo.antonio@gmail.com> Tested-by:
Ellen Wang <ellen@cumulusnetworks.com> Signed-off-by:
Jiri Kosina <jkosina@suse.com> Signed-off-by:
-
Al Viro authored
commit 451a2886 upstream. unfortunately, allowing an arbitrary 16bit value means a possibility of overflow in the calculation of total number of pages in bio_map_user_iov() - we rely on there being no more than PAGE_SIZE members of sum in the first loop there. If that sum wraps around, we end up allocating too small array of pointers to pages and it's easy to overflow it in the second loop. X-Coverup: TINC (and there's no lumber cartel either) Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [bwh: s/MAX_UIOVEC/UIO_MAXIOV/. This was fixed upstream by commit fdc81f45 ("sg_start_req(): use import_iovec()"), but we don't have that function.] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Alan Stern authored
commit 3f2cee73 upstream. The usbfs API has a peculiar hole: Users are not allowed to reap their URBs after the device has been disconnected. There doesn't seem to be any good reason for this; it is an ad-hoc inconsistency. The patch allows users to issue the USBDEVFS_REAPURB and USBDEVFS_REAPURBNDELAY ioctls (together with their 32-bit counterparts on 64-bit systems) even after the device is gone. If no URBs are pending for a disconnected device then the ioctls will return -ENODEV rather than -EAGAIN, because obviously no new URBs will ever be able to complete. The patch also adds a new capability flag for USBDEVFS_GET_CAPABILITIES to indicate that the reap-after-disconnect feature is supported. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Chris Dickens <christopher.a.dickens@gmail.com> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Greg Kroah-Hartman <greg@kroah.com> Signed-off-by:
-
Mimi Zohar authored
commit 5101a185 upstream. To prevent offline stripping of existing file xattrs and relabeling of them at runtime, EVM allows only newly created files to be labeled. As pseudo filesystems are not persistent, stripping of xattrs is not a concern. Some LSMs defer file labeling on pseudo filesystems. This patch permits the labeling of existing files on pseudo files systems. Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> [ luis: backported to 3.16: - added magic.h header file ] Signed-off-by:
-
Kirill A. Shutemov authored
commit 6b7339f4 upstream. Reading page fault handler code I've noticed that under right circumstances kernel would map anonymous pages into file mappings: if the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated on ->mmap(), kernel would handle page fault to not populated pte with do_anonymous_page(). Let's change page fault handler to use do_anonymous_page() only on anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not shared. For file mappings without vm_ops->fault() or shred VMA without vm_ops, page fault on pte_none() entry would lead to SIGBUS. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ luis: backported to 3.16: used Kirill's backport to 3.18 ] Signed-off-by:
-
Colin Ian King authored
commit ca4da5dd upstream. __key_link_end is not freeing the associated array edit structure and this leads to a 512 byte memory leak each time an identical existing key is added with add_key(). The reason the add_key() system call returns okay is that key_create_or_update() calls __key_link_begin() before checking to see whether it can update a key directly rather than adding/replacing - which it turns out it can. Thus __key_link() is not called through __key_instantiate_and_link() and __key_link_end() must cancel the edit. CVE-2015-1333 Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Cc: Moritz Mühlenhoff <jmm@inutil.org> Signed-off-by:
-
Wengang Wang authored
commit 4fabb594 upstream. Fixes: 3e0249f9 ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 9c0fa8dd upstream. At some point: commit 2c86c7ca Author: Namhyung Kim <namhyung@kernel.org> Date: Mon Mar 17 18:18:54 2014 -0300 perf report: Merge al->filtered with hist_entry->filtered We stopped dropping samples for things filtered via the --comms, --dsos, --symbols, etc, i.e. things marked as filtered in the symbol resolution routines (thread__find_addr_map(), perf_event__preprocess_sample(), etc). But then, in: commit 268397cb Author: Namhyung Kim <namhyung@kernel.org> Date: Tue Apr 22 14:49:31 2014 +0900 perf top/tui: Update nr_entries properly after a filter is applied We don't take into account entries that were filtered in perf_event__preprocess_sample() and friends, which leads to inconsistency in the browser seek routines, that expects the number of hist_entry->filtered entries to match what it thinks is the number of unfiltered, browsable entries. So, for instance, when we do: perf top --symbols ___non_existent_symbol___ the hist_browser__nr_entries() routine thinks there are no filters in place, uses the hists->nr_entries but all entries are filtered, leading to a segfault. Tested with: perf top --symbols malloc,free --percentage=relative Freezing, by pressing 'f', at any time and doing the math on the percentages ends up with 100%, ditto for: perf top --dsos libpthread-2.20.so,libxul.so --percentage=relative Both were segfaulting, all fixed now. More work needed to do away with checking if filters are in place, we should just use the nr_non_filtered_samples counter, no need to conditionally use it or hists.nr_filter, as what the browser does is just show unfiltered stuff. An audit of how it is being accounted is needed, this is the minimal fix. Reported-by:
Michael Petlan <mpetlan@redhat.com> Fixes: 268397cb ("perf top/tui: Update nr_entries properly after a filter is applied") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6w01d5q97qk0d64kuojme5in@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 0bc2f2f7 upstream. When setting yup the symbols library we setup several filter lists, for dsos, comms, symbols, etc, and there is code that, if there are filters, do certain operations, like recalculate the number of non filtered histogram entries in the top/report TUI. But they were considering just the "Zoom" filters, when they need to take into account as well the above mentioned filters (perf top --comms, --dsos, etc). So store in symbol_conf.has_filter true if any of those filters is in place. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f5edfmhq69vfvs1kmikq1wep@git.kernel.orgSigned-off-by:
-
- 10 Aug, 2015 28 commits
-
-
Sergei Shtylyov authored
commit c1a4c87b upstream. Printing IRQ # using "%x" and "%u" unsigned formats isn't quite correct as 'ndev->irq' is of type *int*, so the "%d" format needs to be used instead. While fixing this, beautify the dev_info() message in rcar_can_probe() a bit. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Florian Fainelli authored
commit c8cf89f7 upstream. cd->sw_addr is used as a MDIO bus address, which cannot exceed PHY_MAX_ADDR (32), our check was off-by-one. Fixes: 5e95329b ("dsa: add device tree bindings to register DSA switches") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Fainelli authored
commit 8f5063e9 upstream. port_index is used an index into an array, and this information comes from Device Tree, make sure that port_index is not equal to the array size before using it. Move the check against port_index earlier in the loop. Fixes: 5e95329b: ("dsa: add device tree bindings to register DSA switches") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julian Anastasov authored
commit e9e4dd32 upstream. commit 381c759d ("ipv4: Avoid crashing in ip_error") fixes a problem where processed packet comes from device with destroyed inetdev (dev->ip_ptr). This is not expected because inetdev_destroy is called in NETDEV_UNREGISTER phase and packets should not be processed after dev_close_many() and synchronize_net(). Above fix is still required because inetdev_destroy can be called for other reasons. But it shows the real problem: backlog can keep packets for long time and they do not hold reference to device. Such packets are then delivered to upper levels at the same time when device is unregistered. Calling flush_backlog after NETDEV_UNREGISTER_FINAL still accounts all packets from backlog but before that some packets continue to be delivered to upper levels long after the synchronize_net call which is supposed to wait the last ones. Also, as Eric pointed out, processed packets, mostly from other devices, can continue to add new packets to backlog. Fix the problem by moving flush_backlog early, after the device driver is stopped and before the synchronize_net() call. Then use netif_running check to make sure we do not add more packets to backlog. We have to do it in enqueue_to_backlog context when the local IRQ is disabled. As result, after the flush_backlog and synchronize_net sequence all packets should be accounted. Thanks to Eric W. Biederman for the test script and his valuable feedback! Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Fixes: 6e583ce5 ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Nikolay Aleksandrov authored
commit f1158b74 upstream. Since commit b0e9a30d ("bridge: Add vlan id to multicast groups") there's a check in br_ip_equal() for a matching vlan id, but the mdb functions were not modified to use (or at least zero it) so when an entry was added it would have a garbage vlan id (from the local br_ip variable in __br_mdb_add/del) and this would prevent it from being matched and also deleted. So zero out the whole local ip var to protect ourselves from future changes and also to fix the current bug, since there's no vlan id support in the mdb uapi - use always vlan id 0. Example before patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent RTNETLINK answers: Invalid argument After patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Fixes: b0e9a30d ("bridge: Add vlan id to multicast groups") Signed-off-by:
-
Timo Teräs authored
commit fc24f2b2 upstream. Frag needed should be sent only if the inner header asked to not fragment. Currently fragmentation is broken if the tunnel has df set, but df was not asked in the original packet. The tunnel's df needs to be still checked to update internally the pmtu cache. Commit 23a3647b broke it, and this commit fixes the ipv4 df check back to the way it was. Fixes: 23a3647b ("ip_tunnels: Use skb-len to PMTU check.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Eric Dumazet authored
commit d339727c upstream. User space can crash kernel with ip link add ifb10 numtxqueues 100000 type ifb We must replace a BUG_ON() by proper test and return -EINVAL for crazy values. Fixes: 60877a32 ("net: allow large number of tx queues") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Satish Ashok authored
commit f7e2965d upstream. Start the delete timer when adding temp static entries so they can expire. Signed-off-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by:
-
Angga authored
commit 4c938d22 upstream. Before commit daad1512 ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().") MLD packets were only processed locally. After the change, a copy of MLD packet goes through ip6_mr_input, causing MRT6MSG_NOCACHE message to be generated to user space. Make MLD packet only processed locally. Fixes: daad1512 ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().") Signed-off-by:
Hermin Anggawijaya <hermin.anggawijaya@alliedtelesis.co.nz> Signed-off-by:
-
Marek Szyprowski authored
commit 462859aa upstream. nr_bitmaps member of mapping structure stores the number of already allocated bitmaps and it is interpreted as loop iterator (it starts from 0 not from 1), so a comparison against number of possible bitmap extensions should include this fact. This patch fixes this by changing the extension failure condition. This issue has been introduced by commit 4d852ef8 ("arm: dma-mapping: Add support to extend DMA IOMMU mappings"). Reported-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Andy Lutomirski authored
commit 810bc075 upstream. We have a tricky bug in the nested NMI code: if we see RSP pointing to the NMI stack on NMI entry from kernel mode, we assume that we are executing a nested NMI. This isn't quite true. A malicious userspace program can point RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to happen while RSP is still pointing at the NMI stack. Fix it with a sneaky trick. Set DF in the region of code that the RSP check is intended to detect. IRET will clear DF atomically. ( Note: other than paravirt, there's little need for all this complexity. We could check RIP instead of RSP. ) Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> [bwh: Backported to 4.0: adjust filename, context] Signed-off-by:
-
Andy Lutomirski authored
commit a27507ca upstream. Check the repeat_nmi .. end_repeat_nmi special case first. The next patch will rework the RSP check and, as a side effect, the RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so we'll need this ordering of the checks. Note: this is more subtle than it appears. The check for repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code instead of adjusting the "iret" frame to force a repeat. This is necessary, because the code between repeat_nmi and end_repeat_nmi sets "NMI executing" and then writes to the "iret" frame itself. If a nested NMI comes in and modifies the "iret" frame while repeat_nmi is also modifying it, we'll end up with garbage. The old code got this right, as does the new code, but the new code is a bit more explicit. If we were to move the check right after the "NMI executing" check, then we'd get it wrong and have random crashes. ( Because the "NMI executing" check would jump to the code that would modify the "iret" frame without checking if the interrupted NMI was currently modifying it. ) Signed-off-by:
-
Andy Lutomirski authored
commit 0b22930e upstream. I found the nested NMI documentation to be difficult to follow. Improve the comments. Signed-off-by:
-
Andy Lutomirski authored
commit 9b6e6a83 upstream. Returning to userspace is tricky: IRET can fail, and ESPFIX can rearrange the stack prior to IRET. The NMI nesting fixup relies on a precise stack layout and atomic IRET. Rather than trying to teach the NMI nesting fixup to handle ESPFIX and failed IRET, punt: run NMIs that came from user mode on the normal kernel stack. This will make some nested NMIs visible to C code, but the C code is okay with that. As a side effect, this should speed up perf: it eliminates an RDMSR when NMIs come from user mode. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andy Lutomirski authored
commit 0e181bb5 upstream. Now that do_nmi saves CR2, we don't need to save it in asm. Signed-off-by:
-
Andy Lutomirski authored
commit 9d050416 upstream. 32-bit kernels handle nested NMIs in C. Enable the exact same handling on 64-bit kernels as well. This isn't currently necessary, but it will become necessary once the asm code starts allowing limited nesting. Signed-off-by:
-
Denys Vlasenko authored
commit a30b0085 upstream. Jumping to the very next instruction is not very useful: jmp label label: Removing the jump. Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-5-git-send-email-dvlasenk@redhat.comSigned-off-by:
-
Denys Vlasenko authored
commit 0784b364 upstream. No code changes. Signed-off-by:
-
Thomas Gleixner authored
commit 75a06189 upstream. The resend mechanism happily calls the interrupt handler of interrupts which are marked IRQ_NESTED_THREAD from softirq context. This can result in crashes because the interrupt handler is not the proper way to invoke the device handlers. They must be invoked via handle_nested_irq. Prevent the resend even if the interrupt has no valid parent irq set. Its better to have a lost interrupt than a crashing machine. Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Michel Dänzer authored
commit 233709d2 upstream. This can be the case when the GPU is powered off, e.g. via vgaswitcheroo or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin flushes the TLB after setting rdev->gart.ptr to non-NULL. Fixes panic on powering off R7xx GPUs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 5dfc71bc upstream. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
-
Seymour, Shane M authored
commit e7ac6c66 upstream. Two SLES11 SP3 servers encountered similar crashes simultaneously following some kind of SAN/tape target issue: ... qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-8009:3: DEVICE RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: DEVICE RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8009:3: TARGET RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: TARGET RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8012:3: BUS RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-802b:3: BUS RESET SUCCEEDED nexus=3:0:2. qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8018:3: ADAPTER RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-00af:3: Performing ISP error recovery - ha=ffff88bf04d18000. rport-3:0-0: blocked FC remote port time out: removing target and saving binding qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8017:3: ADAPTER RESET SUCCEEDED nexus=3:0:2. rport-2:0-0: blocked FC remote port time out: removing target and saving binding sg_rq_end_io: device detached BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 IP: [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 PGD 7e6586f067 PUD 7e5af06067 PMD 0 [1739975.390354] Oops: 0002 [#1] SMP CPU 0 ... Supported: No, Proprietary modules are loaded [1739975.390463] Pid: 27965, comm: ABCD Tainted: PF X 3.0.101-0.29-default #1 HP ProLiant DL580 Gen8 RIP: 0010:[<ffffffff8133b268>] [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 RSP: 0018:ffff8839dc1e7c68 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff883f0592fc00 RCX: 0000000000000090 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000138 RBP: 0000000000000138 R08: 0000000000000010 R09: ffffffff81bd39d0 R10: 00000000000009c0 R11: ffffffff81025790 R12: 0000000000000001 R13: ffff883022212b80 R14: 0000000000000004 R15: ffff883022212b80 FS: 00007f8e54560720(0000) GS:ffff88407f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000002a8 CR3: 0000007e6ced6000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ABCD (pid: 27965, threadinfo ffff8839dc1e6000, task ffff883592e0c640) Stack: ffff883f0592fc00 00000000fffffffa 0000000000000001 ffff883022212b80 ffff883eff772400 ffffffffa03fa309 0000000000000000 0000000000000000 ffffffffa04003a0 ffff883f063196c0 ffff887f0379a930 ffffffff8115ea1e Call Trace: [<ffffffffa03fa309>] st_open+0x129/0x240 [st] [<ffffffff8115ea1e>] chrdev_open+0x13e/0x200 [<ffffffff811588a8>] __dentry_open+0x198/0x310 [<ffffffff81167d74>] do_last+0x1f4/0x800 [<ffffffff81168fe9>] path_openat+0xd9/0x420 [<ffffffff8116946c>] do_filp_open+0x4c/0xc0 [<ffffffff8115a00f>] do_sys_open+0x17f/0x250 [<ffffffff81468d92>] system_call_fastpath+0x16/0x1b [<00007f8e4f617fd0>] 0x7f8e4f617fcf Code: eb d3 90 48 83 ec 28 40 f6 c6 04 48 89 6c 24 08 4c 89 74 24 20 48 89 fd 48 89 1c 24 4c 89 64 24 10 41 89 f6 4c 89 6c 24 18 74 11 <f0> ff 8f 70 01 00 00 0f 94 c0 45 31 ed 84 c0 74 2b 4c 8d a5 a0 RIP [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 RSP <ffff8839dc1e7c68> CR2: 00000000000002a8 Analysis reveals the cause of the crash to be due to STp->device being NULL. The pointer was NULLed via scsi_tape_put(STp) when it calls scsi_tape_release(). In st_open() we jump to err_out after scsi_block_when_processing_errors() completes and returns the device as offline (sdev_state was SDEV_DEL): 1180 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host 1181 module count. */ 1182 static int st_open(struct inode *inode, struct file *filp) 1183 { 1184 int i, retval = (-EIO); 1185 int resumed = 0; 1186 struct scsi_tape *STp; 1187 struct st_partstat *STps; 1188 int dev = TAPE_NR(inode); 1189 char *name; ... 1217 if (scsi_autopm_get_device(STp->device) < 0) { 1218 retval = -EIO; 1219 goto err_out; 1220 } 1221 resumed = 1; 1222 if (!scsi_block_when_processing_errors(STp->device)) { 1223 retval = (-ENXIO); 1224 goto err_out; 1225 } ... 1264 err_out: 1265 normalize_buffer(STp->buffer); 1266 spin_lock(&st_use_lock); 1267 STp->in_use = 0; 1268 spin_unlock(&st_use_lock); 1269 scsi_tape_put(STp); <-- STp->device = 0 after this 1270 if (resumed) 1271 scsi_autopm_put_device(STp->device); 1272 return retval; The ref count for the struct scsi_tape had already been reduced to 1 when the .remove method of the st module had been called. The kref_put() in scsi_tape_put() caused scsi_tape_release() to be called: 0266 static void scsi_tape_put(struct scsi_tape *STp) 0267 { 0268 struct scsi_device *sdev = STp->device; 0269 0270 mutex_lock(&st_ref_mutex); 0271 kref_put(&STp->kref, scsi_tape_release); <-- calls this 0272 scsi_device_put(sdev); 0273 mutex_unlock(&st_ref_mutex); 0274 } In scsi_tape_release() the struct scsi_device in the struct scsi_tape gets set to NULL: 4273 static void scsi_tape_release(struct kref *kref) 4274 { 4275 struct scsi_tape *tpnt = to_scsi_tape(kref); 4276 struct gendisk *disk = tpnt->disk; 4277 4278 tpnt->device = NULL; <<<---- where the dev is nulled 4279 4280 if (tpnt->buffer) { 4281 normalize_buffer(tpnt->buffer); 4282 kfree(tpnt->buffer->reserved_pages); 4283 kfree(tpnt->buffer); 4284 } 4285 4286 disk->private_data = NULL; 4287 put_disk(disk); 4288 kfree(tpnt); 4289 return; 4290 } Although the problem was reported on SLES11.3 the problem appears in linux-next as well. The crash is fixed by reordering the code so we no longer access the struct scsi_tape after the kref_put() is done on it in st_open(). Signed-off-by:
Shane Seymour <shane.seymour@hp.com> Signed-off-by:
Darren Lavender <darren.lavender@hp.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.com> Acked-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Filipe Manana authored
commit ed958762 upstream. Using the clone ioctl (or extent_same ioctl, which calls the same extent cloning function as well) we end up allowing copy an inline extent from the source file into a non-zero offset of the destination file. This is something not expected and that the btrfs code is not prepared to deal with - all inline extents must be at a file offset equals to 0. For example, the following excerpt of a test case for fstests triggers a crash/BUG_ON() on a write operation after an inline extent is cloned into a non-zero offset: _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount # Create our test files. File foo has the same 2K of data at offset 4K # as file bar has at its offset 0. $XFS_IO_PROG -f -s -c "pwrite -S 0xaa 0 4K" \ -c "pwrite -S 0xbb 4k 2K" \ -c "pwrite -S 0xcc 8K 4K" \ $SCRATCH_MNT/foo | _filter_xfs_io # File bar consists of a single inline extent (2K size). $XFS_IO_PROG -f -s -c "pwrite -S 0xbb 0 2K" \ $SCRATCH_MNT/bar | _filter_xfs_io # Now call the clone ioctl to clone the extent of file bar into file # foo at its offset 4K. This made file foo have an inline extent at # offset 4K, something which the btrfs code can not deal with in future # IO operations because all inline extents are supposed to start at an # offset of 0, resulting in all sorts of chaos. # So here we validate that clone ioctl returns an EOPNOTSUPP, which is # what it returns for other cases dealing with inlined extents. $CLONER_PROG -s 0 -d $((4 * 1024)) -l $((2 * 1024)) \ $SCRATCH_MNT/bar $SCRATCH_MNT/foo # Because of the inline extent at offset 4K, the following write made # the kernel crash with a BUG_ON(). $XFS_IO_PROG -c "pwrite -S 0xdd 6K 2K" $SCRATCH_MNT/foo | _filter_xfs_io status=0 exit The stack trace of the BUG_ON() triggered by the last write is: [152154.035903] ------------[ cut here ]------------ [152154.036424] kernel BUG at mm/page-writeback.c:2286! [152154.036424] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [152154.036424] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc acpi_cpu$ [152154.036424] CPU: 2 PID: 17873 Comm: xfs_io Tainted: G W 4.1.0-rc6-btrfs-next-11+ #2 [152154.036424] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014 [152154.036424] task: ffff880429f70990 ti: ffff880429efc000 task.ti: ffff880429efc000 [152154.036424] RIP: 0010:[<ffffffff8111a9d5>] [<ffffffff8111a9d5>] clear_page_dirty_for_io+0x1e/0x90 [152154.036424] RSP: 0018:ffff880429effc68 EFLAGS: 00010246 [152154.036424] RAX: 0200000000000806 RBX: ffffea0006a6d8f0 RCX: 0000000000000001 [152154.036424] RDX: 0000000000000000 RSI: ffffffff81155d1b RDI: ffffea0006a6d8f0 [152154.036424] RBP: ffff880429effc78 R08: ffff8801ce389fe0 R09: 0000000000000001 [152154.036424] R10: 0000000000002000 R11: ffffffffffffffff R12: ffff8800200dce68 [152154.036424] R13: 0000000000000000 R14: ffff8800200dcc88 R15: ffff8803d5736d80 [152154.036424] FS: 00007fbf119f6700(0000) GS:ffff88043d280000(0000) knlGS:0000000000000000 [152154.036424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [152154.036424] CR2: 0000000001bdc000 CR3: 00000003aa555000 CR4: 00000000000006e0 [152154.036424] Stack: [152154.036424] ffff8803d5736d80 0000000000000001 ffff880429effcd8 ffffffffa04e97c1 [152154.036424] ffff880429effd68 ffff880429effd60 0000000000000001 ffff8800200dc9c8 [152154.036424] 0000000000000001 ffff8800200dcc88 0000000000000000 0000000000001000 [152154.036424] Call Trace: [152154.036424] [<ffffffffa04e97c1>] lock_and_cleanup_extent_if_need+0x147/0x18d [btrfs] [152154.036424] [<ffffffffa04ea82c>] __btrfs_buffered_write+0x245/0x4c8 [btrfs] [152154.036424] [<ffffffffa04ed14b>] ? btrfs_file_write_iter+0x150/0x3e0 [btrfs] [152154.036424] [<ffffffffa04ed15a>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs] [152154.036424] [<ffffffffa04ed2c7>] btrfs_file_write_iter+0x2cc/0x3e0 [btrfs] [152154.036424] [<ffffffff81165a4a>] __vfs_write+0x7c/0xa5 [152154.036424] [<ffffffff81165f89>] vfs_write+0xa0/0xe4 [152154.036424] [<ffffffff81166855>] SyS_pwrite64+0x64/0x82 [152154.036424] [<ffffffff81465197>] system_call_fastpath+0x12/0x6f [152154.036424] Code: 48 89 c7 e8 0f ff ff ff 5b 41 5c 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb e8 ae ef 00 00 49 89 c4 48 8b 03 a8 01 75 02 <0f> 0b 4d 85 e4 74 59 49 8b 3c 2$ [152154.036424] RIP [<ffffffff8111a9d5>] clear_page_dirty_for_io+0x1e/0x90 [152154.036424] RSP <ffff880429effc68> [152154.242621] ---[ end trace e3d3376b23a57041 ]--- Fix this by returning the error EOPNOTSUPP if an attempt to copy an inline extent into a non-zero offset happens, just like what is done for other scenarios that would require copying/splitting inline extents, which were introduced by the following commits: 00fdf13a ("Btrfs: fix a crash of clone with inline extents's split") 3f9e3df8 ("btrfs: replace error code from btrfs_drop_extents") Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Alexey Brodkin authored
commit f51e2f19 upstream. Currently instruction_pointer() returns pt_regs->ret and so return value is of type "long", which implicitly stands for "signed long". While that's perfectly fine when dealing with 32-bit values if return value of instruction_pointer() gets assigned to 64-bit variable sign extension may happen. And at least in one real use-case it happens already. In perf_prepare_sample() return value of perf_instruction_pointer() (which is an alias to instruction_pointer() in case of ARC) is assigned to (struct perf_sample_data)->ip (which type is "u64"). And what we see if instuction pointer points to user-space application that in case of ARC lays below 0x8000_0000 "ip" gets set properly with leading 32 zeros. But if instruction pointer points to kernel address space that starts from 0x8000_0000 then "ip" is set with 32 leadig "f"-s. I.e. id instruction_pointer() returns 0x8100_0000, "ip" will be assigned with 0xffff_ffff__8100_0000. Which is obviously wrong. In particular that issuse broke output of perf, because perf was unable to associate addresses like 0xffff_ffff__8100_0000 with anything from /proc/kallsyms. That's what we used to see: ----------->8---------- 6.27% ls [unknown] [k] 0xffffffff8046c5cc 2.96% ls libuClibc-0.9.34-git.so [.] memcpy 2.25% ls libuClibc-0.9.34-git.so [.] memset 1.66% ls [unknown] [k] 0xffffffff80666536 1.54% ls libuClibc-0.9.34-git.so [.] 0x000224d6 1.18% ls libuClibc-0.9.34-git.so [.] 0x00022472 ----------->8---------- With that change perf output looks much better now: ----------->8---------- 8.21% ls [kernel.kallsyms] [k] memset 3.52% ls libuClibc-0.9.34-git.so [.] memcpy 2.11% ls libuClibc-0.9.34-git.so [.] malloc 1.88% ls libuClibc-0.9.34-git.so [.] memset 1.64% ls [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.41% ls [kernel.kallsyms] [k] __d_lookup_rcu ----------->8---------- Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: arc-linux-dev@synopsys.com Cc: linux-kernel@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Sergei Shtylyov authored
commit 5e63e6ba upstream. rcar_can_probe() regards 0 as a wrong IRQ #, despite platform_get_irq() that it calls returns negative error code in that case. This leads to the following being printed to the console when attempting to open the device: error requesting interrupt fffffffa because rcar_can_open() calls request_irq() with a negative IRQ #, and that function naturally fails with -EINVAL. Check for the negative error codes instead and propagate them upstream instead of just returning -ENODEV. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
-
Filipe Manana authored
commit d3efe084 upstream. When we call btrfs_commit_transaction(), we splice the list "ordered" of our transaction handle into the transaction's "pending_ordered" list, but we don't re-initialize the "ordered" list of our transaction handle, this means it still points to the same elements it used to before the splice. Then we check if the current transaction's state is >= TRANS_STATE_COMMIT_START and if it is we end up calling btrfs_end_transaction() which simply splices again the "ordered" list of our handle into the transaction's "pending_ordered" list, leaving multiple pointers to the same ordered extents which results in list corruption when we are iterating, removing and freeing ordered extents at btrfs_wait_pending_ordered(), resulting in access to dangling pointers / use-after-free issues. Similarly, btrfs_end_transaction() can end up in some cases calling btrfs_commit_transaction(), and both did a list splice of the transaction handle's "ordered" list into the transaction's "pending_ordered" without re-initializing the handle's "ordered" list, resulting in exactly the same problem. This produces the following warning on a kernel with linked list debugging enabled: [109749.265416] ------------[ cut here ]------------ [109749.266410] WARNING: CPU: 7 PID: 324 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() [109749.267969] list_del corruption. prev->next should be ffff8800ba087e20, but was fffffff8c1f7c35d (...) [109749.287505] Call Trace: [109749.288135] [<ffffffff8145f077>] dump_stack+0x4f/0x7b [109749.298080] [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2 [109749.331605] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb [109749.334849] [<ffffffff81260642>] ? __list_del_entry+0x5a/0x98 [109749.337093] [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48 [109749.337847] [<ffffffff81260642>] __list_del_entry+0x5a/0x98 [109749.338678] [<ffffffffa053e8bf>] btrfs_wait_pending_ordered+0x46/0xdb [btrfs] [109749.340145] [<ffffffffa058a65f>] ? __btrfs_run_delayed_items+0x149/0x163 [btrfs] [109749.348313] [<ffffffffa054077d>] btrfs_commit_transaction+0x36b/0xa10 [btrfs] [109749.349745] [<ffffffff81087310>] ? trace_hardirqs_on+0xd/0xf [109749.350819] [<ffffffffa055370d>] btrfs_sync_file+0x36f/0x3fc [btrfs] [109749.351976] [<ffffffff8118ec98>] vfs_fsync_range+0x8f/0x9e [109749.360341] [<ffffffff8118ecc3>] vfs_fsync+0x1c/0x1e [109749.368828] [<ffffffff8118ee1d>] do_fsync+0x34/0x4e [109749.369790] [<ffffffff8118f045>] SyS_fsync+0x10/0x14 [109749.370925] [<ffffffff81465197>] system_call_fastpath+0x12/0x6f [109749.382274] ---[ end trace 48e0d07f7c03d95a ]--- On a non-debug kernel this leads to invalid memory accesses, causing a crash. Fix this by using list_splice_init() instead of list_splice() in btrfs_commit_transaction() and btrfs_end_transaction(). Fixes: 50d9aa99 ("Btrfs: make sure logged extents complete in the current transaction V3" Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
commit 497b4050 upstream. We were allocating memory with memdup_user() but we were never releasing that memory. This affected pretty much every call to the ioctl, whether it deduplicated extents or not. This issue was reported on IRC by Julian Taylor and on the mailing list by Marcel Ritter, credit goes to them for finding the issue. Reported-by:
Julian Taylor <jtaylor.debian@googlemail.com> Reported-by:
Marcel Ritter <ritter.marcel@gmail.com> Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
Johannes Thumshirn authored
commit d23f47d4 upstream. Destroy serial_minors IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
