- 28 Jul, 2014 40 commits
-
-
Suresh Reddy authored
[ Upstream commit 4cad9f3b ] On BE3, if the clear-interrupt bit of the EQ doorbell is not set the first time it is armed, ocassionally we have observed that the EQ doesn't raise anymore interrupts even if it is in armed state. This patch fixes this by setting the clear-interrupt bit when EQs are armed for the first time in be_open(). Signed-off-by:
Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Pfaff authored
[ Upstream commit ac30ef83 ] netlink_dump() returns a negative errno value on error. Until now, netlink_recvmsg() directly recorded that negative value in sk->sk_err, but that's wrong since sk_err takes positive errno values. (This manifests as userspace receiving a positive return value from the recv() system call, falsely indicating success.) This bug was introduced in the commit that started checking the netlink_dump() return value, commit b44d211e (netlink: handle errors from netlink_dump()). Multithreaded Netlink dumps are one way to trigger this behavior in practice, as described in the commit message for the userspace workaround posted here: http://openvswitch.org/pipermail/dev/2014-June/042339.html This commit also fixes the same bug in netlink_poll(), introduced in commit cd1df525 (netlink: add flow control for memory mapped I/O). Signed-off-by:
Ben Pfaff <blp@nicira.com> Signed-off-by:
-
Thomas Fitzsimmons authored
[ Upstream commit 0a198587 ] This commit fixes the command value generated for CSUM calculation when running in big endian mode. The Ethernet protocol ID for IP was being unconditionally byte-swapped in the layer 3 protocol check (with swab16), which caused the mvneta driver to not function correctly in big endian mode. This patch byte-swaps the ID conditionally with htons. Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by:
Thomas Fitzsimmons <fitzsim@fitzsim.org> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 4d12bc63 ] As reported by Maggie Mae Roxas, the mvneta driver doesn't behave properly in 10 Mbit/s mode. This is due to a misconfiguration of the MVNETA_GMAC_AUTONEG_CONFIG register: bit MVNETA_GMAC_CONFIG_MII_SPEED must be set for a 100 Mbit/s speed, but cleared for a 10 Mbit/s speed, which the driver was not properly doing. This commit adjusts that by setting the MVNETA_GMAC_CONFIG_MII_SPEED bit only in 100 Mbit/s mode, and relying on the fact that all the speed related bits of this register are cleared at the beginning of the mvneta_adjust_link() function. This problem exists since c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") which is the commit that introduced the mvneta driver in the kernel. Cc: <stable@vger.kernel.org> # v3.8+ Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Reported-by:
Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Cc: Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Andrey Utkin authored
[ Upstream commit 36beddc2 ] Setting just skb->sk without taking its reference and setting a destructor is invalid. However, in the places where this was done, skb is used in a way not requiring skb->sk setting. So dropping the setting of skb->sk. Thanks to Eric Dumazet <eric.dumazet@gmail.com> for correct solution. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79441Reported-by:
Ed Martin <edman007@edman007.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 6e08d5e3 ] The undo code assumes that, upon entering loss recovery, TCP 1) always retransmit something 2) the retransmission never fails locally (e.g., qdisc drop) so undo_marker is set in tcp_enter_recovery() and undo_retrans is incremented only when tcp_retransmit_skb() is successful. When the assumption is broken because TCP's cwnd is too small to retransmit or the retransmit fails locally. The next (DUP)ACK would incorrectly revert the cwnd and the congestion state in tcp_try_undo_dsack() or tcp_may_undo(). Subsequent (DUP)ACKs may enter the recovery state. The sender repeatedly enter and (incorrectly) exit recovery states if the retransmits continue to fail locally while receiving (DUP)ACKs. The fix is to initialize undo_retrans to -1 and start counting on the first retransmission. Always increment undo_retrans even if the retransmissions fail locally because they couldn't cause DSACKs to undo the cwnd reduction. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
dingtianhong authored
[ Upstream commit 52ad353a ] The problem was triggered by these steps: 1) create socket, bind and then setsockopt for add mc group. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("192.168.1.2"); setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); 2) drop the mc group for this socket. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("0.0.0.0"); setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq)); 3) and then drop the socket, I found the mc group was still used by the dev: netstat -g Interface RefCnt Group --------------- ------ --------------------- eth2 1 255.0.0.37 Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need to be released for the netdev when drop the socket, but this process was broken when route default is NULL, the reason is that: The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr is NULL, the default route dev will be chosen, then the ifindex is got from the dev, then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL, the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be released from the mc_list, but the dev didn't dec the refcnt for this mc group, so when dropping the socket, the mc_list is NULL and the dev still keep this group. v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs, so I add the checking for the in_dev before polling the mc_list, make sure when we remove the mc group, dec the refcnt to the real dev which was using the mc address. The problem would never happened again. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Loic Prylli authored
[ Upstream commit 54951194 ] A bug was introduced in NETDEV_CHANGE notifier sequence causing the arp table to be sometimes spuriously cleared (including manual arp entries marked permanent), upon network link carrier changes. The changed argument for the notifier was applied only to a single caller of NETDEV_CHANGE, missing among others netdev_state_change(). So upon net_carrier events induced by the network, which are triggering a call to netdev_state_change(), arp_netdev_event() would decide whether to clear or not arp cache based on random/junk stack values (a kind of read buffer overflow). Fixes: be9efd36 ("net: pass changed flags along with NETDEV_CHANGE event") Fixes: 6c8b4e3f ("arp: flush arp cache on IFF_NOARP change") Signed-off-by:
Loic Prylli <loicp@google.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 53433300 ] Add two device IDs found in an out-of-tree driver downloadable from Netgear. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bernd Wachter authored
[ Upstream commit 8dcb4b15 ] There's a new version of the Telewell 4G modem working with, but not recognized by this driver. Signed-off-by:
Bernd Wachter <bernd.wachter@jolla.com> Acked-by:
-
Edward Allcutt authored
[ Upstream commit 68b7107b ] Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by:
Edward Allcutt <edward.allcutt@openmarket.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 5924f17a ] When in repair-mode and TCP_RECV_QUEUE is set, we end up calling tcp_push with mss_now being 0. If data is in the send-queue and tcp_set_skb_tso_segs gets called, we crash because it will divide by mss_now: [ 347.151939] divide error: 0000 [#1] SMP [ 347.152907] Modules linked in: [ 347.152907] CPU: 1 PID: 1123 Comm: packetdrill Not tainted 3.16.0-rc2 #4 [ 347.152907] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 347.152907] task: f5b88540 ti: f3c82000 task.ti: f3c82000 [ 347.152907] EIP: 0060:[<c1601359>] EFLAGS: 00210246 CPU: 1 [ 347.152907] EIP is at tcp_set_skb_tso_segs+0x49/0xa0 [ 347.152907] EAX: 00000b67 EBX: f5acd080 ECX: 00000000 EDX: 00000000 [ 347.152907] ESI: f5a28f40 EDI: f3c88f00 EBP: f3c83d10 ESP: f3c83d00 [ 347.152907] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 347.152907] CR0: 80050033 CR2: 083158b0 CR3: 35146000 CR4: 000006b0 [ 347.152907] Stack: [ 347.152907] c167f9d9 f5acd080 000005b4 00000002 f3c83d20 c16013e6 f3c88f00 f5acd080 [ 347.152907] f3c83da0 c1603b5a f3c83d38 c10a0188 00000000 00000000 f3c83d84 c10acc85 [ 347.152907] c1ad5ec0 00000000 00000000 c1ad679c 010003e0 00000000 00000000 f3c88fc8 [ 347.152907] Call Trace: [ 347.152907] [<c167f9d9>] ? apic_timer_interrupt+0x2d/0x34 [ 347.152907] [<c16013e6>] tcp_init_tso_segs+0x36/0x50 [ 347.152907] [<c1603b5a>] tcp_write_xmit+0x7a/0xbf0 [ 347.152907] [<c10a0188>] ? up+0x28/0x40 [ 347.152907] [<c10acc85>] ? console_unlock+0x295/0x480 [ 347.152907] [<c10ad24f>] ? vprintk_emit+0x1ef/0x4b0 [ 347.152907] [<c1605716>] __tcp_push_pending_frames+0x36/0xd0 [ 347.152907] [<c15f4860>] tcp_push+0xf0/0x120 [ 347.152907] [<c15f7641>] tcp_sendmsg+0xf1/0xbf0 [ 347.152907] [<c116d920>] ? kmem_cache_free+0xf0/0x120 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c114f0f0>] ? do_wp_page+0x3e0/0x850 [ 347.152907] [<c161c36a>] inet_sendmsg+0x4a/0xb0 [ 347.152907] [<c1150269>] ? handle_mm_fault+0x709/0xfb0 [ 347.152907] [<c15a006b>] sock_aio_write+0xbb/0xd0 [ 347.152907] [<c1180b79>] do_sync_write+0x69/0xa0 [ 347.152907] [<c1181023>] vfs_write+0x123/0x160 [ 347.152907] [<c1181d55>] SyS_write+0x55/0xb0 [ 347.152907] [<c167f0d8>] sysenter_do_call+0x12/0x28 This can easily be reproduced with the following packetdrill-script (the "magic" with netem, sk_pacing and limit_output_bytes is done to prevent the kernel from pushing all segments, because hitting the limit without doing this is not so easy with packetdrill): 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +0.1 < . 1:1(0) ack 1 win 65000 +0 accept(3, ..., ...) = 4 // This forces that not all segments of the snd-queue will be pushed +0 `tc qdisc add dev tun0 root netem delay 10ms` +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=2` +0 setsockopt(4, SOL_SOCKET, 47, [2], 4) = 0 +0 write(4,...,10000) = 10000 +0 write(4,...,10000) = 10000 // Set tcp-repair stuff, particularly TCP_RECV_QUEUE +0 setsockopt(4, SOL_TCP, 19, [1], 4) = 0 +0 setsockopt(4, SOL_TCP, 20, [1], 4) = 0 // This now will make the write push the remaining segments +0 setsockopt(4, SOL_SOCKET, 47, [20000], 4) = 0 +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=130000` // Now we will crash +0 write(4,...,1000) = 1000 This happens since ec342325 (tcp: fix retransmission in repair mode). Prior to that, the call to tcp_push was prevented by a check for tp->repair. The patch fixes it, by adding the new goto-label out_nopush. When exiting tcp_sendmsg and a push is not required, which is the case for tp->repair, we go to this label. When repairing and calling send() with TCP_RECV_QUEUE, the data is actually put in the receive-queue. So, no push is required because no data has been added to the send-queue. Cc: Andrew Vagin <avagin@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Fixes: ec342325 (tcp: fix retransmission in repair mode) Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by:
Andrew Vagin <avagin@openvz.org> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 07b0f009 ] While it is legal to kfree(NULL), it is not wise to use : put_page(virt_to_head_page(NULL)) BUG: unable to handle kernel paging request at ffffeba400000000 IP: [<ffffffffc01f5928>] virt_to_head_page+0x36/0x44 [bnx2x] Reported-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a48e5faf ] Madalin-Cristian reported crashs happening after a recent commit (5a4ae5f6 "vlan: unnecessary to check if vlan_pcpu_stats is NULL") ----------------------------------------------------------------------- root@p5040ds:~# vconfig add eth8 1 root@p5040ds:~# vconfig rem eth8.1 Unable to handle kernel paging request for data at address 0x2bc88028 Faulting instruction address: 0xc058e950 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: CPU: 3 PID: 2167 Comm: vconfig Tainted: G W 3.16.0-rc3-00346-g65e85bf #2 task: e7264d90 ti: e2c2c000 task.ti: e2c2c000 NIP: c058e950 LR: c058ea30 CTR: c058e900 REGS: e2c2db20 TRAP: 0300 Tainted: G W (3.16.0-rc3-00346-g65e85bf) MSR: 00029002 <CE,EE,ME> CR: 48000428 XER: 20000000 DEAR: 2bc88028 ESR: 00000000 GPR00: c047299c e2c2dbd0 e7264d90 00000000 2bc88000 00000000 ffffffff 00000000 GPR08: 0000000f 00000000 000000ff 00000000 28000422 10121928 10100000 10100000 GPR16: 10100000 00000000 c07c5968 00000000 00000000 00000000 e2c2dc48 e7838000 GPR24: c07c5bac c07c58a8 e77290cc c07b0000 00000000 c05de6c0 e7838000 e2c2dc48 NIP [c058e950] vlan_dev_get_stats64+0x50/0x170 LR [c058ea30] vlan_dev_get_stats64+0x130/0x170 Call Trace: [e2c2dbd0] [ffffffea] 0xffffffea (unreliable) [e2c2dc20] [c047299c] dev_get_stats+0x4c/0x140 [e2c2dc40] [c0488ca8] rtnl_fill_ifinfo+0x3d8/0x960 [e2c2dd70] [c0489f4c] rtmsg_ifinfo+0x6c/0x110 [e2c2dd90] [c04731d4] rollback_registered_many+0x344/0x3b0 [e2c2ddd0] [c047332c] rollback_registered+0x2c/0x50 [e2c2ddf0] [c0476058] unregister_netdevice_queue+0x78/0xf0 [e2c2de00] [c058d800] unregister_vlan_dev+0xc0/0x160 [e2c2de20] [c058e360] vlan_ioctl_handler+0x1c0/0x550 [e2c2de90] [c045d11c] sock_ioctl+0x28c/0x2f0 [e2c2deb0] [c010d070] do_vfs_ioctl+0x90/0x7b0 [e2c2df20] [c010d7d0] SyS_ioctl+0x40/0x80 [e2c2df40] [c000f924] ret_from_syscall+0x0/0x3c Fix this problem by freeing percpu stats from dev->destructor() instead of ndo_uninit() Reported-by:
Madalin-Cristian Bucur <madalin.bucur@freescale.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5925a055 ] sk_dst_cache has __rcu annotation, so we need a cast to avoid following sparse error : include/net/sock.h:1774:19: warning: incorrect type in initializer (different address spaces) include/net/sock.h:1774:19: expected struct dst_entry [noderef] <asn:4>*__ret include/net/sock.h:1774:19: got struct dst_entry *dst Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: 7f502361 ("ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fix") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7f502361 ] We have two different ways to handle changes to sk->sk_dst First way (used by TCP) assumes socket lock is owned by caller, and use no extra lock : __sk_dst_set() & __sk_dst_reset() Another way (used by UDP) uses sk_dst_lock because socket lock is not always taken. Note that sk_dst_lock is not softirq safe. These ways are not inter changeable for a given socket type. ipv4_sk_update_pmtu(), added in linux-3.8, added a race, as it used the socket lock as synchronization, but users might be UDP sockets. Instead of converting sk_dst_lock to a softirq safe version, use xchg() as we did for sk_rx_dst in commit e47eb5df ("udp: ipv4: do not use sk_dst_lock from softirq context") In a follow up patch, we probably can remove sk_dst_lock, as it is only used in IPv6. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f8864972 ] When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by:
Dormando <dormando@rydia.net> Signed-off-by:
-
Wei-Chun Chao authored
[ Upstream commit 5882a07c ] This patch fixes a kernel BUG_ON in skb_segment. It is hit when testing two VMs on openvswitch with one VM acting as VXLAN gateway. During VXLAN packet GSO, skb_segment is called with skb->data pointing to inner TCP payload. skb_segment calls skb_network_protocol to retrieve the inner protocol. skb_network_protocol actually expects skb->data to point to MAC and it calls pskb_may_pull with ETH_HLEN. This ends up pulling in ETH_HLEN data from header tail. As a result, pskb_trim logic is skipped and BUG_ON is hit later. Move skb_push in front of skb_network_protocol so that skb->data lines up properly. kernel BUG at net/core/skbuff.c:2999! Call Trace: [<ffffffff816ac412>] tcp_gso_segment+0x122/0x410 [<ffffffff816bc74c>] inet_gso_segment+0x13c/0x390 [<ffffffff8164b39b>] skb_mac_gso_segment+0x9b/0x170 [<ffffffff816b3658>] skb_udp_tunnel_segment+0xd8/0x390 [<ffffffff816b3c00>] udp4_ufo_fragment+0x120/0x140 [<ffffffff816bc74c>] inet_gso_segment+0x13c/0x390 [<ffffffff8109d742>] ? default_wake_function+0x12/0x20 [<ffffffff8164b39b>] skb_mac_gso_segment+0x9b/0x170 [<ffffffff8164b4d0>] __skb_gso_segment+0x60/0xc0 [<ffffffff8164b6b3>] dev_hard_start_xmit+0x183/0x550 [<ffffffff8166c91e>] sch_direct_xmit+0xfe/0x1d0 [<ffffffff8164bc94>] __dev_queue_xmit+0x214/0x4f0 [<ffffffff8164bf90>] dev_queue_xmit+0x10/0x20 [<ffffffff81687edb>] ip_finish_output+0x66b/0x890 [<ffffffff81688a58>] ip_output+0x58/0x90 [<ffffffff816c628f>] ? fib_table_lookup+0x29f/0x350 [<ffffffff816881c9>] ip_local_out_sk+0x39/0x50 [<ffffffff816cbfad>] iptunnel_xmit+0x10d/0x130 [<ffffffffa0212200>] vxlan_xmit_skb+0x1d0/0x330 [vxlan] [<ffffffffa02a3919>] vxlan_tnl_send+0x129/0x1a0 [openvswitch] [<ffffffffa02a2cd6>] ovs_vport_send+0x26/0xa0 [openvswitch] [<ffffffffa029931e>] do_output+0x2e/0x50 [openvswitch] Signed-off-by:
Wei-Chun Chao <weichunc@plumgrid.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 3acc7461 ] Messages from the modem exceeding 256 bytes cause communication failure. The WDM protocol is strictly "read on demand", meaning that we only poll for unread data after receiving a notification from the modem. Since we have no way to know how much data the modem has to send, we must make sure that the buffer we provide is "big enough". Message truncation does not work. Truncated messages are left unread until the modem has another message to send. Which often won't happen until the userspace application has given up waiting for the final part of the last message, and therefore sends another command. With a proper CDC WDM function there is a descriptor telling us which buffer size the modem uses. But with this vendor specific implementation there is no known way to calculate the exact "big enough" number. It is an unknown property of the modem firmware. Experience has shown that 256 is too small. The discussion of this failure ended up concluding that 512 might be too small as well. So 1024 seems like a reasonable value for now. Fixes: 41c47d8c ("net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver") Cc: Enrico Mioso <mrkiko.rs@gmail.com> Reported-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Tested-by:
-
Li RongQing authored
[ Upstream commit 916c1689 ] skb_cow called in vlan_reorder_header does not free the skb when it failed, and vlan_reorder_header returns NULL to reset original skb when it is called in vlan_untag, lead to a memory leak. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
-
Daniel Borkmann authored
[ Upstream commit 24599e61 ] When writing to the sysctl field net.sctp.auth_enable, it can well be that the user buffer we handed over to proc_dointvec() via proc_sctp_do_auth() handler contains something other than integers. In that case, we would set an uninitialized 4-byte value from the stack to net->sctp.auth_enable that can be leaked back when reading the sysctl variable, and it can unintentionally turn auth_enable on/off based on the stack content since auth_enable is interpreted as a boolean. Fix it up by making sure proc_dointvec() returned sucessfully. Fixes: b14878cc ("net: sctp: cache auth_enable per endpoint") Reported-by:
Florian Westphal <fwestpha@redhat.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 2cd0d743 ] If there is an MSS change (or misbehaving receiver) that causes a SACK to arrive that covers the end of an skb but is less than one MSS, then tcp_match_skb_to_sack() was rounding up pkt_len to the full length of the skb ("Round if necessary..."), then chopping all bytes off the skb and creating a zero-byte skb in the write queue. This was visible now because the recently simplified TLP logic in bef1909e ("tcp: fixing TLP's FIN recovery") could find that 0-byte skb at the end of the write queue, and now that we do not check that skb's length we could send it as a TLP probe. Consider the following example scenario: mss: 1000 skb: seq: 0 end_seq: 4000 len: 4000 SACK: start_seq: 3999 end_seq: 4000 The tcp_match_skb_to_sack() code will compute: in_sack = false pkt_len = start_seq - TCP_SKB_CB(skb)->seq = 3999 - 0 = 3999 new_len = (pkt_len / mss) * mss = (3999/1000)*1000 = 3000 new_len += mss = 4000 Previously we would find the new_len > skb->len check failing, so we would fall through and set pkt_len = new_len = 4000 and chop off pkt_len of 4000 from the 4000-byte skb, leaving a 0-byte segment afterward in the write queue. With this new commit, we notice that the new new_len >= skb->len check succeeds, so that we return without trying to fragment. Fixes: adb92db8 ("tcp: Make SACK code to split only at mss boundaries") Reported-by:
-
Daniel Borkmann authored
[ Upstream commit ff5e92c1 ] sysctl handler proc_sctp_do_hmac_alg(), proc_sctp_do_rto_min() and proc_sctp_do_rto_max() do not properly reflect some error cases when writing values via sysctl from internal proc functions such as proc_dointvec() and proc_dostring(). In all these cases we pass the test for write != 0 and partially do additional work just to notice that additional sanity checks fail and we return with hard-coded -EINVAL while proc_do* functions might also return different errors. So fix this up by simply testing a successful return of proc_do* right after calling it. This also allows to propagate its return value onwards to the user. While touching this, also fix up some minor style issues. Fixes: 4f3fdf3b ("sctp: add check rto_min and rto_max in sysctl") Fixes: 3c68198e ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by:
-
Tyler Hall authored
[ Upstream commit a8e83b17 ] The commit "slip: Fix deadlock in write_wakeup" fixes a deadlock caused by a change made in both slcan and slip. This is a direct port of that fix. Signed-off-by:
Tyler Hall <tylerwhall@gmail.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Tyler Hall authored
[ Upstream commit 661f7fda ] Use schedule_work() to avoid potentially taking the spinlock in interrupt context. Commit cc9fa74e ("slip/slcan: added locking in wakeup function") added necessary locking to the wakeup function and 367525c8/ddcde142 ("can: slcan: Fix spinlock variant") converted it to spin_lock_bh() because the lock is also taken in timers. Disabling softirqs is not sufficient, however, as tty drivers may call write_wakeup from interrupt context. This driver calls tty->ops->write() with its spinlock held, which may immediately cause an interrupt on the same CPU and subsequent spin_bug(). Simply converting to spin_lock_irq/irqsave() prevents this deadlock, but causes lockdep to point out a possible circular locking dependency between these locks: (&(&sl->lock)->rlock){-.....}, at: slip_write_wakeup (&port_lock_key){-.....}, at: serial8250_handle_irq.part.13 The slip transmit is holding the slip spinlock when calling the tty write. This grabs the port lock. On an interrupt, the handler grabs the port lock and calls write_wakeup which grabs the slip lock. This could be a problem if a serial interrupt occurs on another CPU during the slip transmit. To deal with these issues, don't grab the lock in the wakeup function by deferring the writeout to a workqueue. Also hold the lock during close when de-assigning the tty pointer to safely disarm the worker and timers. This bug is easily reproducible on the first transmit when slip is used with the standard 8250 serial driver. [<c0410b7c>] (spin_bug+0x0/0x38) from [<c006109c>] (do_raw_spin_lock+0x60/0x1d0) r5:eab27000 r4:ec02754c [<c006103c>] (do_raw_spin_lock+0x0/0x1d0) from [<c04185c0>] (_raw_spin_lock+0x28/0x2c) r10:0000001f r9:eabb814c r8:eabb8140 r7:40070193 r6:ec02754c r5:eab27000 r4:ec02754c r3:00000000 [<c0418598>] (_raw_spin_lock+0x0/0x2c) from [<bf3a0220>] (slip_write_wakeup+0x50/0xe0 [slip]) r4:ec027540 r3:00000003 [<bf3a01d0>] (slip_write_wakeup+0x0/0xe0 [slip]) from [<c026e420>] (tty_wakeup+0x48/0x68) r6:00000000 r5:ea80c480 r4:eab27000 r3:bf3a01d0 [<c026e3d8>] (tty_wakeup+0x0/0x68) from [<c028a8ec>] (uart_write_wakeup+0x2c/0x30) r5:ed68ea90 r4:c06790d8 [<c028a8c0>] (uart_write_wakeup+0x0/0x30) from [<c028dc44>] (serial8250_tx_chars+0x114/0x170) [<c028db30>] (serial8250_tx_chars+0x0/0x170) from [<c028dffc>] (serial8250_handle_irq+0xa0/0xbc) r6:000000c2 r5:00000060 r4:c06790d8 r3:00000000 [<c028df5c>] (serial8250_handle_irq+0x0/0xbc) from [<c02933a4>] (dw8250_handle_irq+0x38/0x64) r7:00000000 r6:edd2f390 r5:000000c2 r4:c06790d8 [<c029336c>] (dw8250_handle_irq+0x0/0x64) from [<c028d2f4>] (serial8250_interrupt+0x44/0xc4) r6:00000000 r5:00000000 r4:c06791c4 r3:c029336c [<c028d2b0>] (serial8250_interrupt+0x0/0xc4) from [<c0067fe4>] (handle_irq_event_percpu+0xb4/0x2b0) r10:c06790d8 r9:eab27000 r8:00000000 r7:00000000 r6:0000001f r5:edd52980 r4:ec53b6c0 r3:c028d2b0 [<c0067f30>] (handle_irq_event_percpu+0x0/0x2b0) from [<c006822c>] (handle_irq_event+0x4c/0x6c) r10:c06790d8 r9:eab27000 r8:c0673ae0 r7:c05c2020 r6:ec53b6c0 r5:edd529d4 r4:edd52980 [<c00681e0>] (handle_irq_event+0x0/0x6c) from [<c006b140>] (handle_level_irq+0xe8/0x100) r6:00000000 r5:edd529d4 r4:edd52980 r3:00022000 [<c006b058>] (handle_level_irq+0x0/0x100) from [<c00676f8>] (generic_handle_irq+0x30/0x40) r5:0000001f r4:0000001f [<c00676c8>] (generic_handle_irq+0x0/0x40) from [<c000f57c>] (handle_IRQ+0xd0/0x13c) r4:ea997b18 r3:000000e0 [<c000f4ac>] (handle_IRQ+0x0/0x13c) from [<c00086c4>] (armada_370_xp_handle_irq+0x4c/0x118) r8:000003ff r7:ea997b18 r6:ffffffff r5:60070013 r4:c0674dc0 [<c0008678>] (armada_370_xp_handle_irq+0x0/0x118) from [<c0013840>] (__irq_svc+0x40/0x70) Exception stack(0xea997b18 to 0xea997b60) 7b00: 00000001 20070013 7b20: 00000000 0000000b 20070013 eab27000 20070013 00000000 ed10103e eab27000 7b40: c06790d8 ea997b74 ea997b60 ea997b60 c04186c0 c04186c8 60070013 ffffffff r9:eab27000 r8:ed10103e r7:ea997b4c r6:ffffffff r5:60070013 r4:c04186c8 [<c04186a4>] (_raw_spin_unlock_irqrestore+0x0/0x54) from [<c0288fc0>] (uart_start+0x40/0x44) r4:c06790d8 r3:c028ddd8 [<c0288f80>] (uart_start+0x0/0x44) from [<c028982c>] (uart_write+0xe4/0xf4) r6:0000003e r5:00000000 r4:ed68ea90 r3:0000003e [<c0289748>] (uart_write+0x0/0xf4) from [<bf3a0d20>] (sl_xmit+0x1c4/0x228 [slip]) r10:ed388e60 r9:0000003c r8:ffffffdd r7:0000003e r6:ec02754c r5:ea717eb8 r4:ec027000 [<bf3a0b5c>] (sl_xmit+0x0/0x228 [slip]) from [<c0368d74>] (dev_hard_start_xmit+0x39c/0x6d0) r8:eaf163c0 r7:ec027000 r6:ea717eb8 r5:00000000 r4:00000000 Signed-off-by:
-
Dmitry Popov authored
[ Upstream commit e0056593 ] This patch fixes 3 similar bugs where incoming packets might be routed into wrong non-wildcard tunnels: 1) Consider the following setup: ip address add 1.1.1.1/24 dev eth0 ip address add 1.1.1.2/24 dev eth0 ip tunnel add ipip1 remote 2.2.2.2 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets from 2.2.2.2 were routed into ipip1 even if it has dst = 1.1.1.2. Moreover even if there was wildcard tunnel like ip tunnel add ipip0 remote 2.2.2.2 local any mode ipip dev eth0 but it was created before explicit one (with local 1.1.1.1), incoming ipip packets with src = 2.2.2.2 and dst = 1.1.1.2 were still routed into ipip1. Same issue existed with all tunnels that use ip_tunnel_lookup (gre, vti) 2) ip address add 1.1.1.1/24 dev eth0 ip tunnel add ipip1 remote 2.2.146.85 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets with dst = 1.1.1.1 were routed into ipip1, no matter what src address is. Any remote ip address which has ip_tunnel_hash = 0 raised this issue, 2.2.146.85 is just an example, there are more than 4 million of them. And again, wildcard tunnel like ip tunnel add ipip0 remote any local 1.1.1.1 mode ipip dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. Gre & vti tunnels had the same issue. 3) ip address add 1.1.1.1/24 dev eth0 ip tunnel add gre1 remote 2.2.146.84 local 1.1.1.1 key 1 mode gre dev eth0 ip link set gre1 up Any incoming gre packet with key = 1 were routed into gre1, no matter what src/dst addresses are. Any remote ip address which has ip_tunnel_hash = 0 raised the issue, 2.2.146.84 is just an example, there are more than 4 million of them. Wildcard tunnel like ip tunnel add gre2 remote any local any key 1 mode gre dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. All this stuff happened because while looking for a wildcard tunnel we didn't check that matched tunnel is a wildcard one. Fixed. Signed-off-by:
Dmitry Popov <ixaphire@qrator.net> Signed-off-by:
-
David Ertman authored
commit 96dee024 upstream. Previous commit c3a0dce3 fixed an overrun for the RAR on i218 devices. This commit also attempted to homogenize the RAR/SHRA access for all parts accessed by the e1000e driver. This change introduced an error for assigning MAC addresses to guest OS's for 82579 devices. Only RAR[0] is accessible to the driver for 82579 parts, and additional addresses must be placed into the SHRA[L|H] registers. The rar_entry_count was changed in the previous commit to an inaccurate value that accounted for all RAR and SHRA registers, not just the ones usable by the driver. This patch fixes the count to the correct value and adjusts the e1000_rar_set_pch2lan() function to user the correct index. Cc: John Greene <jogreene@redhat.com> Signed-off-by:
Dave Ertman <davidx.m.ertman@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "Alexander Y. Fomichev" <aleksandr.fomichev@x5.ru> Signed-off-by:
-
Hugh Dickins authored
commit b1a36650 upstream. shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576 ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
commit 8e205f77 upstream. Commit f00cdc6d ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6d and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by:
-
Hugh Dickins authored
commit f00cdc6d upstream. Trinity finds that mmap access to a hole while it's punched from shmem can prevent the madvise(MADV_REMOVE) or fallocate(FALLOC_FL_PUNCH_HOLE) from completing, until the reader chooses to stop; with the puncher's hold on i_mutex locking out all other writers until it can complete. It appears that the tmpfs fault path is too light in comparison with its hole-punching path, lacking an i_data_sem to obstruct it; but we don't want to slow down the common case. Extend shmem_fallocate()'s existing range notification mechanism, so shmem_fault() can refrain from faulting pages into the hole while it's punched, waiting instead on i_mutex (when safe to sleep; or repeatedly faulting when not). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Emmanuel Grumbach authored
commit 43d826ca upstream. We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Oren Givon authored
commit b3c063ae upstream. Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Niu Yawei authored
commit d68aab6b upstream. Commit 1ab6c499 (fs: convert fs shrinkers to new scan/count API) accidentally removed locking from quota shrinker. Fix it - dqcache_shrink_scan() should use dq_list_lock to protect the scan on free_dquots list. Fixes: 1ab6c499Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Stefan Assmann authored
commit 76252723 upstream. To properly re-initialize SR-IOV it is necessary to reset the device even if it is already down. Not doing this may result in Tx unit hangs. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
Todd Fujinaka authored
commit 94826487 upstream. On some devices, the internal PLL circuit occasionally provides the wrong clock frequency after power up. The probability of failure is less than one failure per 1000 power cycles. When the failure occurs, the internal clock frequency is around 1/20 of the correct frequency. Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Tested-by:
-
Guenter Roeck authored
commit de12d6f4 upstream. Temperature limit registers are signed. Limits therefore need to be clamped to (-128, 127) degrees C and not to (0, 255) degrees C. Without this fix, writing a limit of 128 degrees C sets the actual limit to -128 degrees C. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Axel Lin authored
commit ee14b644 upstream. Dashes are not allowed in hwmon name attributes. Use "da9052" instead of "da9052-hwmon". Signed-off-by:
-
Axel Lin authored
commit 6b00f440 upstream. Dashes are not allowed in hwmon name attributes. Use "da9055" instead of "da9055-hwmon". Signed-off-by:
-
David Vrabel authored
commit fb9a0c44 upstream. Since cd9151e2 (xen/balloon: set a mapping for ballooned out pages), a ballooned out page had its entry in the p2m set to the MFN of one of the scratch pages. This means that the p2m will contain many entries pointing to the same MFN. During a domain save, these many-to-one entries are not identified as such and the scratch page is saved multiple times. On restore the ballooned pages are populated with new frames and the domain may use up its allocation before all pages can be restored. Since the original fix only needed to keep a mapping for the ballooned page it is safe to set ballooned out pages as INVALID_P2M_ENTRY in the p2m (as they were before). Thus preventing them from being saved and re-populated on restore. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reported-by:
Marek Marczykowski <marmarek@invisiblethingslab.com> Tested-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
zhangwei(Jovi) authored
commit f0160a5a upstream. The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing, so add it, to be consistent with __trace_printk/__trace_bprintk. Those functions are all called by the same function: trace_printk(). Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.comSigned-off-by:
zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
