- 09 Nov, 2017 3 commits
-
-
Vivien Didelot authored
Add DSA helpers to setup and teardown a master net device wired to its CPU port. This centralizes the dsa_ptr assignment. This also makes the master ethtool helpers static at the same time. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The dsa_dst_parse function called just before dsa_dst_apply does not parse the tree but does only one thing: it assigns the default CPU port to dst->cpu_dp and to each user ports. This patch simplifies this by calling a dsa_tree_setup_default_cpu function at the beginning of dsa_dst_apply directly. A dsa_port_is_user helper is added for convenience. Signed-off-by:
-
Vivien Didelot authored
A DSA port has a dedicated CPU port assigned to it, stored in the cpu_dp member. It is not meant to be modified by a port, thus make it const. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 08 Nov, 2017 37 commits
-
-
Yi Yang authored
v16->17 - Fixed disputed check code: keep them in nsh_push and nsh_pop but also add them in __ovs_nla_copy_actions v15->v16 - Add csum recalculation for nsh_push, nsh_pop and set_nsh pointed out by Pravin - Move nsh key into the union with ipv4 and ipv6 and add check for nsh key in match_validate pointed out by Pravin - Add nsh check in validate_set and __ovs_nla_copy_actions v14->v15 - Check size in nsh_hdr_from_nlattr - Fixed four small issues pointed out By Jiri and Eric v13->v14 - Rename skb_push_nsh to nsh_push per Dave's comment - Rename skb_pop_nsh to nsh_pop per Dave's comment v12->v13 - Fix NSH header length check in set_nsh v11->v12 - Fix missing changes old comments pointed out - Fix new comments for v11 v10->v11 - Fix the left three disputable comments for v9 but not fixed in v10. v9->v10 - Change struct ovs_key_nsh to struct ovs_nsh_key_base base; __be32 context[NSH_MD1_CONTEXT_SIZE]; - Fix new comments for v9 v8->v9 - Fix build error reported by daily intel build because nsh module isn't selected by openvswitch v7->v8 - Rework nested value and mask for OVS_KEY_ATTR_NSH - Change pop_nsh to adapt to nsh kernel module - Fix many issues per comments from Jiri Benc v6->v7 - Remove NSH GSO patches in v6 because Jiri Benc reworked it as another patch series and they have been merged. - Change it to adapt to nsh kernel module added by NSH GSO patch series v5->v6 - Fix the rest comments for v4. - Add NSH GSO support for VxLAN-gpe + NSH and Eth + NSH. v4->v5 - Fix many comments by Jiri Benc and Eric Garver for v4. v3->v4 - Add new NSH match field ttl - Update NSH header to the latest format which will be final format and won't change per its author's confirmation. - Fix comments for v3. v2->v3 - Change OVS_KEY_ATTR_NSH to nested key to handle length-fixed attributes and length-variable attriubte more flexibly. - Remove struct ovs_action_push_nsh completely - Add code to handle nested attribute for SET_MASKED - Change PUSH_NSH to use the nested OVS_KEY_ATTR_NSH to transfer NSH header data. - Fix comments and coding style issues by Jiri and Eric v1->v2 - Change encap_nsh and decap_nsh to push_nsh and pop_nsh - Dynamically allocate struct ovs_action_push_nsh for length-variable metadata. OVS master and 2.8 branch has merged NSH userspace patch series, this patch is to enable NSH support in kernel data path in order that OVS can support NSH in compat mode by porting this. Signed-off-by:Yi Yang <yi.y.yang@intel.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Eric Garver <e@erig.me> Acked-by:
Pravin Shelar <pshelar@ovn.org> Signed-off-by:
-
Arnd Bergmann authored
Timestamps in pktgen are currently retrieved using the deprecated do_gettimeofday() function that wraps its signed 32-bit seconds in 2038 (on 32-bit architectures) and requires a division operation to calculate microseconds. The pktgen header is also defined with the same limitations, hardcoding to a 32-bit seconds field that can be interpreted as unsigned to produce times that only wrap in 2106. Whatever code reads the timestamps should be aware of that problem in general, but probably doesn't care too much as we are mostly interested in the time passing between packets, and that is correctly represented. Using 64-bit nanoseconds would be cheaper and good for 584 years. Using monotonic times would also make this unambiguous by avoiding the overflow, but would make it harder to correlate to the times with those on remote machines. Either approach would require adding a new runtime flag and implementing the same thing on the remote side, which we probably don't want to do unless someone sees it as a real problem. Also, this should be coordinated with other pktgen implementations and might need a new magic number. For the moment, I'm documenting the overflow in the source code, and changing the implementation over to an open-coded ktime_get_real_ts64() plus division, so we don't have to look at it again while scanning for deprecated time interfaces. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree, they are: 1) Speed up table replacement on busy systems with large tables (and many cores) in x_tables. Now xt_replace_table() synchronizes by itself by waiting until all cpus had an even seqcount and we use no use seqlock when fetching old counters, from Florian Westphal. 2) Add nf_l4proto_log_invalid() and nf_ct_l4proto_log_invalid() to speed up packet processing in the fast path when logging is not enabled, from Florian Westphal. 3) Precompute masked address from configuration plane in xt_connlimit, from Florian. 4) Don't use explicit size for set selection if performance set policy is selected. 5) Allow to get elements from an existing set in nf_tables. 6) Fix incorrect check in nft_hash_deactivate(), from Florian. 7) Cache netlink attribute size result in l4proto->nla_size, from Florian. 8) Handle NFPROTO_INET in nf_ct_netns_get() from conntrack core. 9) Use power efficient workqueue in conntrack garbage collector, from Vincent Guittot. 10) Remove unnecessary parameter, in conntrack l4proto functions, also from Florian. 11) Constify struct nf_conntrack_l3proto definitions, from Florian. 12) Remove all typedefs in nf_conntrack_h323 via coccinelle semantic patch, from Harsha Sharma. 13) Don't store address in the rbtree nodes in xt_connlimit, they are never used, from Florian. 14) Fix out of bound access in the conntrack h323 helper, patch from Eric Sesterhenn. 15) Print symbols for the address returned with %pS in IPVS, from Helge Deller. 16) Proc output should only display its own netns in IPVS, from KUWAZAWA Takuya. 17) Small clean up in size_entry_mwt(), from Colin Ian King. 18) Use test_and_clear_bit from nf_nat_proto_clean() instead of separated non-atomic test and then clear bit, from Florian Westphal. 19) Consolidate prefix length maps in ipset, from Aaron Conole. 20) Fix sparse warnings in ipset, from Jozsef Kadlecsik. 21) Simplify list_set_memsize(), from simran singhal. ==================== Signed-off-by: -
Miquel Raynal authored
Add ethtool statistics support by reading the GOP statistics from the hardware counters. Also implement a workqueue to gather the statistics every second or some 32-bit counters could overflow. Suggested-by:
Stefan Chulski <stefanc@marvell.com> Signed-off-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Christophe JAILLET says: ==================== fsl/fman: Fix some error handling code in mac_probe Commit c6e26ea8 ("dpaa_eth: change device used") generated some conflicts in my patches waiting for submission. So I took a closer look at it. So here is a serie of 4 patches. The 1st one is just about a spurious call to 'dev_set_drvdata()', which is done in only 1 error handling path in the function. The 2nd one removes some devm_iounmap/release/kfree functions which look useless to me. The 3rd one fixes a missing of_node_put. The 4th one is just cosmetic and removes a useless message. ==================== Signed-off-by:
-
Christophe JAILLET authored
Memory allocation functions already display some informaton in case of memory allocation failure. There is no need to add an extra 'dev_err' here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
If 'of_phy_find_device()' fails, we must undo the previous 'of_node_get()' call, as done the the following error handling code. Signed-off-by:
-
Christophe JAILLET authored
There is no need to release explicitly some devm_ allocated resources. If the 'mac_probe()' probe function fails, they will be released automatically, as already done in the other error handling paths of this function. Also goto '_return_of_get_parent' as in the other error handling paths. This is useless (priv->fixed_link is NULL at this point), but at least it is consistent. Signed-off-by:
-
Christophe JAILLET authored
Commit c6e26ea8 ("dpaa_eth: change device used") has removed usage of 'dev_set_drvdata()' in the 'mac_probe() function. This call should also be axed. Signed-off-by:
-
Colin Ian King authored
The size for IFLA_IF_NETNSID is missing from the size calculation because the proceeding semicolon was not removed. Fix this by removing the semicolon. Detected by CoverityScan, CID#1461135 ("Structurally dead code") Fixes: 79e1ad14 ("rtnetlink: use netnsid to query interface") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
-
Egil Hjelmeland authored
Now that ds->num_ports is 3, there is no need to check range of "port" parameter. Signed-off-by:
Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by:
-
Arnd Bergmann authored
On 32-bit architectures, rtc_time_to_tm() returns incorrect results in 2038 or later, and do_gettimeofday() is broken for the same reason. This changes the code to use ktime_get_real_seconds() and time64_to_tm() instead, both of them are 2038-safe, and we can also get rid of the CONFIG_RTC_LIB dependency that way. Signed-off-by:
-
Arnd Bergmann authored
Commit a67e9472 ("of: Add array read functions with min/max size limits") added a new interface for reading variable-length arrays from DT properties. One user was added in dsa recently and this causes a build error because that code can be built with CONFIG_OF disabled: net/dsa/dsa2.c: In function 'dsa_switch_parse_member_of': net/dsa/dsa2.c:678:7: error: implicit declaration of function 'of_property_read_variable_u32_array'; did you mean 'of_property_read_u32_array'? [-Werror=implicit-function-declaration] This adds a dummy functions for of_property_read_variable_u32_array() and a few others that had been missing here. I decided to move of_property_read_string() and of_property_read_string_helper() in the process to make it easier to compare the two sets of function prototypes to make sure they match. Fixes: 975e6e32 ("net: dsa: rework switch parsing") Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Dan Carpenter authored
We return on the previous line so this "return 0;" statement should just be deleted. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Egil Hjelmeland says: ==================== net: dsa: lan9303: Linting This series is non-functional. - Correct some errors in comments and documentation. Remove scripts/checkpatch.pl WARNINGs and most CHECKs: - Replace msleep(1) with usleep_range() - Adjust indenting Changes v1 -> v2: - Removed patch 4 "Remove unnecessary parentheses", to be addressed later ==================== Signed-off-by: -
Egil Hjelmeland authored
Remove scripts/checkpatch.pl CHECKs by adjusting indenting. Signed-off-by:
-
Egil Hjelmeland authored
Remove scripts/checkpatch.pl WARNING by replacing msleep(1) with usleep_range() Signed-off-by:
-
Egil Hjelmeland authored
Signed-off-by:
-
Egil Hjelmeland authored
Two comments refer to registers, but lack the LAN9303_ prefix. Fix that. Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the VID create error handling case instead of 0, as done elsewhere in this function. Fixes: c57529e1 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the dpaa_bp_alloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== qdisc RED offload Nogah says: Add an offload support for RED qdisc for mlxsw driver. The first patch adds the ability to offload RED qdisc by using ndo_setup_tc. It gives RED three commands, to offload, change or delete the qdisc, to get the qdisc generic stats and to get it's RED xstats. There is no enforcement on a driver to offload or not offload the qdisc and it is up to the driver to decide. RED qdisc is first being created and only later graft to a parent (unless it is a root qdisc). For that reason the return value of the offload replace command that is called in the init process doesn't reflect actual offload state. The offload state is determined in the dump function so it can be reflected to the user. This function is also responsible for stats update. The patchses 2-3 change the name of TC_SETUP_MQPRIO & TC_SETUP_CBS to match with the new convention of QDISC prefix. The rest of the patchset is driver support for the qdisc. Currently only as root qdisc that is being set on the default traffic class. It supports only the following parameters of RED: min, max, probability and ECN mode. Limit and burst size related params are being ignored at this moment. --- v7->v8 internal: (external RFC->v1) - patch 1/9: - unite the offload and un-offload functions - clean the OFFLOAD flag when the qdisc in not offloaded - patch 2/9: - minor change to avoid a conflict - patch 5/9: - check for bad min/max values - clean the offloaded qdisc after a bad config call ==================== Signed-off-by: -
Nogah Frankel authored
Add support for ndo_setup_tc with enum tc_setup_type value of TC_SETUP_QDISC_STATS. This call updates the generic qdisc stats from the cache if the handle ID that is asked for matching the root qdisc ID and fails otherwise. Currently doesn't support qlen and rqueues. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Nogah Frankel authored
Add support for ndo_setup_tc with enum tc_setup_type value of TC_SETUP_RED_XSTATS. This call returns the RED qdisc xstats from the cache if the handle ID that is asked for matching the root qdisc ID and fails otherwise. Signed-off-by:
-
Nogah Frankel authored
Add more statistics to be collected from the HW periodically. These stats are tclass based (beside ECN marked packet, that exist only port based). They are needed to expose RED qdisc stats and xstats correctly. Signed-off-by:
-
Yuval Mintz authored
This adds the counter group definitions for 2 new counter groups which are necessary for gaining ECN & wred counters. Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
-
Nogah Frankel authored
Add support for ndo_setup_tc with enum tc_setup_type value of TC_SETUP_RED. This call sets RED qdisc on a traffic class. This patch supports RED qdisc only as a root qdisc and set in on the default tclass. It can be set with or without ECN. Signed-off-by:
-
Nogah Frankel authored
This patch adds 2 new registers: - Congestion WRED ECN TClass Profile Register [CWTP] - Congestion WRED ECN TClass and Pool Mapping Register [CWTPM] These registers would later be needed to offload RED-related functionality to the HW. Signed-off-by:
-
Nogah Frankel authored
Change TC_SETUP_CBS to TC_SETUP_QDISC_CBS to match the new convention.. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Nogah Frankel authored
Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIO to match the new convention. Signed-off-by:
-
Nogah Frankel authored
Add the ability to offload RED qdisc by using ndo_setup_tc. There are four commands for RED offloading: * TC_RED_SET: handles set and change. * TC_RED_DESTROY: handle qdisc destroy. * TC_RED_STATS: update the qdiscs counters (given as reference) * TC_RED_XSTAT: returns red xstats. Whether RED is being offloaded is being determined every time dump action is being called because parent change of this qdisc could change its offload state but doesn't require any RED function to be called. Signed-off-by:
-
Lawrence Brakmo authored
The original patch had the wrong filename. Fixes: bfdf7569 ("bpf: create samples/bpf/tcp_bpf.readme") Signed-off-by:
Lawrence Brakmo <brakmo@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
David S. Miller authored
Tom Herbert says: ==================== ila: make identifier format optional and other fixes The identifier type and checksum neutral mapping bits are optional in identifier formats. This patch set fixes the implementation to make them optional and configurable. Specific items: - Clean up checksum diff code in ILA - Add checksum neutral mapping auto so that checksum neutral mapping can be configured without requiring use of the C-bit - Add identifier type configuration and allow identifier type to be configured so that the identifier type field does not need to be present - Added ILA documention: ila.txt I have fixes for ILA in iproute2 that will be poseted separately. Tested: Ran netperf TCP_RR on various combinations of checksum mode and the two supported identifier types. v2: - Add proper sign off - In ILA LWT, only check prefix length includes identifier type if identifier type is enabled (ILA_ATYPE_USE_FORMAT). - Add a hook type so that it can be specified whether ILA translation is done on input or output route funciton in LWT. ==================== Signed-off-by: -
Tom Herbert authored
Add documenation for kernel ILA. This describes ILA, features, configuration gives some examples. Signed-off-by:
Tom Herbert <tom@quantonium.net> Signed-off-by:
-
Tom Herbert authored
In LWT tunnels both an input and output route method is defined. If both of these are executed in the same path then double translation happens and the effect is not correct. This patch adds a new attribute that indicates the hook type. Two values are defined for route output and route output. ILA translation is only done for the one that is set. The default is to enable ILA on route output. Signed-off-by:
-
Tom Herbert authored
Allow identifier to be explicitly configured for a mapping. This can either be one of the identifier types specified in the ILA draft or a value of ILA_ATYPE_USE_FORMAT which means the identifier type is inferred from the identifier type field. If a value other than ILA_ATYPE_USE_FORMAT is set for a mapping then it is assumed that the identifier type field is not present in an identifier. Signed-off-by:
-
Tom Herbert authored
Add checksum neutral auto that performs checksum neutral mapping without using the C-bit. This is enabled by configuration of a mapping. The checksum neutral function has been split into ila_csum_do_neutral_fmt and ila_csum_do_neutral_nofmt. The former handles the C-bit and includes it in the adjustment value. The latter just sets the adjustment value on the locator diff only. Added configuration for checksum neutral map aut in ila_lwt and ila_xlat. Signed-off-by:
-
