- 11 Dec, 2015 16 commits
-
-
Peter Wu authored
Free skb for received frames with a wrong checksum. This can happen pretty rapidly, exhausting all memory. This fixes a memleak (detected with kmemleak). Originally found while using monitor mode, but it also appears during managed mode (once the link is up). Cc: stable@vger.kernel.org Signed-off-by:
Peter Wu <peter@lekensteyn.nl> ACKed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Move constants to the right of binary operators. Generated by: scripts/coccinelle/misc/compare_const_fl.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by:
-
Julia Lawall authored
Move constants to the right of binary operators. Generated by: scripts/coccinelle/misc/compare_const_fl.cocci Signed-off-by:
-
Amitkumar Karwar authored
EU is not a valid country in db.txt file. Hence regulatory_hint returns failure if EEPROM provides region code as 0x30. Let's use FR for 0x30. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
If device has already received country information from EEPROM, we won't parse AP's country IE and download it to firmware. We will also set regulatory flags to disable beacon hints and ignore country IE. Signed-off-by:
-
Amitkumar Karwar authored
Driver gets country information from EEPROM during initialization. We will call regulatory_hint to update current regulatory domain. As by default world regulatory domain is selected by cfg80211, country '00' from EEPROM is ignored. Signed-off-by:
-
Amitkumar Karwar authored
It's been observed that even if firmware returns an error for a configuration command, we go ahead and start AP. This patch changes the command type from async to sync so that threads waits for command response and return failure start AP. Signed-off-by:
-
Amitkumar Karwar authored
Even if ADHOC start or join attempt is failed, these commands are returned with success status by firmware. Actual connection result is provided inside command response. This patch parses the adhoc connection result and resets connection state variables if connection is not successful. Signed-off-by:
-
Dan Carpenter authored
This code was supposed to trigger a BUG() if we truncate the output but it's off by one so it allows one character to be truncated. Really drivers shouldn't call BUG_ON() and especially for something minor like this so I've changed it to a WARN_ON(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The current code returns success if prism2_init_local_data() fails, but we want to return an error code. Also we can remove the bogus ret initializer because it is wrong and never used. Signed-off-by:
-
Dan Carpenter authored
We already know that "wep_key->key_length" is set so there is no need to check again. Also the last curly brace was indented too far. Signed-off-by:
-
Dan Carpenter authored
This code causes a static checker warning because we check for "if (ret == 0)" but we have already had verified that was true. Clean it up a little. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Dan Carpenter authored
If the mode is NL80211_IFTYPE_UNSPECIFIED then we return success at the start of the function so this condition is never true. Signed-off-by:
-
Colin Ian King authored
There is a null ptr check for fws to set bcmc_credit_check, however, there a lock and unlock on fws should only performed if fwts is also not null to also avoid a potential null pointer deference. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Guy Mishol authored
Align to new wl18xx sg parameters. This requires to split both wl12xx/wl18xx enumerators. Signed-off-by:
Guy Mishol <guym@ti.com> Acked-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
- 09 Dec, 2015 23 commits
-
-
Julia Lawall authored
The cmac_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
These fields are updated but never read. Remove the overhead. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Under heavy TX load, bnx2x_poll() can loop forever and trigger soft lockup bugs. A napi poll handler must yield after one TX completion round, risk of livelock is too high otherwise. Bug is very easy to trigger using a debug build, and udp flood, because of added cpu cycles in TX completion, and we do not receive enough packets to break the loop. Reported-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Herbert Xu authored
The patch 9497df88 ("rhashtable: Fix reader/rehash race") added a pair of barriers. In fact the wmb is superfluous because every subsequent write to the old or new hash table uses rcu_assign_pointer, which itself carriers a full barrier prior to the assignment. Therefore we may remove the explicit wmb. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Update Kconfig and some fixes for cxgb4 This series update Kconfig to add description for Chelsio's next generation T6 family of adapters, also fixes ethtool stats alignment and prevents simultaneous execution of service_ofldq thread, deals with queue wrap around and adds some fl counters for debugging purpose and device ID for new T5 adapters. This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. Thanks V2: Declare 'service_ofldq_running' as bool in Patch 4/7 ("cxgb4: prevent simultaneous execution of service_ofldq()") based on review comment by David Miller ==================== Signed-off-by: -
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Add Free List DMA Mapping Errors to SGE Queue info for Free Lists. Add Free List "Low" counter to count the number of times we see the number of pointers that we _think_ the hardware sees in the Free List below the Egress Threshold. Signed-off-by:
-
Hariprasad Shenai authored
The WR headers may not fit within one descriptor. So we need to deal with wrap-around here. Based on original patch by Pranjal Joshi <pjoshi@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Change mutual exclusion mechanism to prevent multiple threads of execution from running in service_ofldq() at the same time. The old mechanism used an implicit guard on the down-call path and none on the restart path and wasn't working. This checking makes the mechanism explicit and is much easier to understand as a result. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Use helper macro ACCESS_ONCE() to load from the SGE status page to prevent the compiler loading multiple times. Based on original work by Mike Werner <werner@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
yankejian authored
here is the patch raising the performance of XGE by: 1)changes the way page management method for enet momery, and 2)reduces the count of rmb, and 3)adds Memory prefetching Signed-off-by:
Kejian Yan <yankejian@huawei.com> Signed-off-by:
-
Tejun Heo authored
In cgroup v1, dealing with cgroup membership was difficult because the number of membership associations was unbound. As a result, cgroup v1 grew several controllers whose primary purpose is either tagging membership or pull in configuration knobs from other subsystems so that cgroup membership test can be avoided. net_cls and net_prio controllers are examples of the latter. They allow configuring network-specific attributes from cgroup side so that network subsystem can avoid testing cgroup membership; unfortunately, these are not only cumbersome but also problematic. Both net_cls and net_prio aren't properly hierarchical. Both inherit configuration from the parent on creation but there's no interaction afterwards. An ancestor doesn't restrict the behavior in its subtree in anyway and configuration changes aren't propagated downwards. Especially when combined with cgroup delegation, this is problematic because delegatees can mess up whatever network configuration implemented at the system level. net_prio would allow the delegatees to set whatever priority value regardless of CAP_NET_ADMIN and net_cls the same for classid. While it is possible to solve these issues from controller side by implementing hierarchical allowable ranges in both controllers, it would involve quite a bit of complexity in the controllers and further obfuscate network configuration as it becomes even more difficult to tell what's actually being configured looking from the network side. While not much can be done for v1 at this point, as membership handling is sane on cgroup v2, it'd be better to make cgroup matching behave like other network matches and classifiers than introducing further complications. In preparation, this patch updates sock->sk_cgrp_data handling so that it points to the v2 cgroup that sock was created in until either net_prio or net_cls is used. Once either of the two is used, sock->sk_cgrp_data reverts to its previous role of carrying prioidx and classid. This is to avoid adding yet another cgroup related field to struct sock. As the mode switching can happen at most once per boot, the switching mechanism is aimed at lowering hot path overhead. It may leak a finite, likely small, number of cgroup refs and report spurious prioidx or classid on switching; however, dynamic updates of prioidx and classid have always been racy and lossy - socks between creation and fd installation are never updated, config changes don't update existing sockets at all, and prioidx may index with dead and recycled cgroup IDs. Non-critical inaccuracies from small race windows won't make any noticeable difference. This patch doesn't make use of the pointer yet. The following patch will implement netfilter match for cgroup2 membership. v2: Use sock_cgroup_data to avoid inflating struct sock w/ another cgroup specific field. v3: Add comments explaining why sock_data_prioidx() and sock_data_classid() use different fallback values. Signed-off-by:Tejun Heo <tj@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Daniel Wagner <daniel.wagner@bmw-carit.de> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Tejun Heo authored
Introduce sock->sk_cgrp_data which is a struct sock_cgroup_data. ->sk_cgroup_prioidx and ->sk_classid are moved into it. The struct and its accessors are defined in cgroup-defs.h. This is to prepare for overloading the fields with a cgroup pointer. This patch mostly performs equivalent conversions but the followings are noteworthy. * Equality test before updating classid is removed from sock_update_classid(). This shouldn't make any noticeable difference and a similar test will be implemented on the helper side later. * sock_update_netprioidx() now takes struct sock_cgroup_data and can be moved to netprio_cgroup.h without causing include dependency loop. Moved. * The dummy version of sock_update_netprioidx() converted to a static inline function while at it. Signed-off-by:
-
Tejun Heo authored
netprio builds per-netdev contiguous priomap array which is indexed by css->id. The array is allocated using kzalloc() effectively limiting the maximum ID supported to some thousand range. This patch caps the maximum supported css->id to USHRT_MAX which should be way above what is actually useable. This allows reducing sock->sk_cgrp_prioidx to u16 from u32. The freed up part will be used to overload the cgroup related fields. sock->sk_cgrp_prioidx's position is swapped with sk_mark so that the two cgroup related fields are adjacent. Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Daniel Borkmann <daniel@iogearbox.net> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupDavid S. Miller authored
Preparatory changes for some new socket cgroup infrastructure and netfilter targets. Signed-off-by: -
Stefan Hajnoczi authored
This reverts commit 0d76d6e8 and merge commit c402293b, reversing changes made to c89359a4. The virtio-vsock device specification is not finalized yet. Michael Tsirkin voiced concerned about merging this code when the hardware interface (and possibly the userspace interface) could still change. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== sh_eth: optimize MDIO code Here's a set of 3 patches against DaveM's 'net-next.git' repo which gets rid of ~35 LoCs in the MDIO bitbang methods. ==================== Signed-off-by: -
Sergei Shtylyov authored
After the MDIO bitbang code consolidation, there's no need anymore for bb_{set|clr}() as well as bb_read() -- just expand them inline, thus saving more LoCs... Signed-off-by:Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Sergei Shtylyov authored
sh_mm[cd]_ctrl() and sh_set_mdio() all look mostly the same -- factor out their common code and put it into sh_mdio_ctrl(). Signed-off-by:
-
Sergei Shtylyov authored
The MDIO control bits are always mapped to the same bits of the same register (PIR), so there's no need to store their masks in the 'struct bb_info'... Signed-off-by:
-
Julia Lawall authored
The xgene_mac_ops and xgene_port_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
-
- 08 Dec, 2015 1 commit
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Vallo says: ==================== brcfmac * support bcm4359 which can operate in two bands concurrently * disable runtime pm for USB avoiding issues * use generic pm callback in PCIe driver * support wowlan wake indication reporting * add beamforming support * unified handling of firmware files ath10k * support Manegement Frame Protection (MFP) * add thermal throttling support for 10.4 firmware * add support for pktlog in QCA99X0 * add debugfs file to enable Bluetooth coexistence feature * use firmware's native mesh interface type instead of raw mode iwlwifi * BT coex improvements * D3 operation bugfixes * rate control improvements * firmware debugging infra improvements * ground work for multi Rx * various security fixes ==================== Conflicts: drivers/net/wireless/ath/ath10k/pci.c The conflict resolution at: http://article.gmane.org/gmane.linux.kernel.next/37391 by Stephen Rothwell was used. Signed-off-by:
-
