- 22 Jul, 2020 24 commits
-
-
Vineet Gupta authored
commit 00fdec98 upstream. Trap handler for syscall tracing reads EFA (Exception Fault Address), in case strace wants PC of trap instruction (EFA is not part of pt_regs as of current code). However this EFA read is racy as it happens after dropping to pure kernel mode (re-enabling interrupts). A taken interrupt could context-switch, trigger a different task's trap, clobbering EFA for this execution context. Fix this by reading EFA early, before re-enabling interrupts. A slight side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler. The trap handler is common to both ARCompact and ARCv2 builds too. This just came out of code rework/review and no real problem was reported but is clearly a potential problem specially for strace. Cc: <stable@vger.kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
commit 41855a89 upstream. clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4 ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Boris Burkov authored
commit 6bf9cd2e upstream. Under somewhat convoluted conditions, it is possible to attempt to release an extent_buffer that is under io, which triggers a BUG_ON in btrfs_release_extent_buffer_pages. This relies on a few different factors. First, extent_buffer reads done as readahead for searching use WAIT_NONE, so they free the local extent buffer reference while the io is outstanding. However, they should still be protected by TREE_REF. However, if the system is doing signficant reclaim, and simultaneously heavily accessing the extent_buffers, it is possible for releasepage to race with two concurrent readahead attempts in a way that leaves TREE_REF unset when the readahead extent buffer is released. Essentially, if two tasks race to allocate a new extent_buffer, but the winner who attempts the first io is rebuffed by a page being locked (likely by the reclaim itself) then the loser will still go ahead with issuing the readahead. The loser's call to find_extent_buffer must also race with the reclaim task reading the extent_buffer's refcount as 1 in a way that allows the reclaim to re-clear the TREE_REF checked by find_extent_buffer. The following represents an example execution demonstrating the race: CPU0 CPU1 CPU2 reada_for_search reada_for_search readahead_tree_block readahead_tree_block find_create_tree_block find_create_tree_block alloc_extent_buffer alloc_extent_buffer find_extent_buffer // not found allocates eb lock pages associate pages to eb insert eb into radix tree set TREE_REF, refs == 2 unlock pages read_extent_buffer_pages // WAIT_NONE not uptodate (brand new eb) lock_page if !trylock_page goto unlock_exit // not an error free_extent_buffer release_extent_buffer atomic_dec_and_test refs to 1 find_extent_buffer // found try_release_extent_buffer take refs_lock reads refs == 1; no io atomic_inc_not_zero refs to 2 mark_buffer_accessed check_buffer_tree_ref // not STALE, won't take refs_lock refs == 2; TREE_REF set // no action read_extent_buffer_pages // WAIT_NONE clear TREE_REF release_extent_buffer atomic_dec_and_test refs to 1 unlock_page still not uptodate (CPU1 read failed on trylock_page) locks pages set io_pages > 0 submit io return free_extent_buffer release_extent_buffer dec refs to 0 delete from radix tree btrfs_release_extent_buffer_pages BUG_ON(io_pages > 0)!!! We observe this at a very low rate in production and were also able to reproduce it in a test environment by introducing some spurious delays and by introducing probabilistic trylock_page failures. To fix it, we apply check_tree_ref at a point where it could not possibly be unset by a competing task: after io_pages has been incremented. All the codepaths that clear TREE_REF check for io, so they would not be able to clear it after this point until the io is done. Stack trace, for reference: [1417839.424739] ------------[ cut here ]------------ [1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841! [1417839.447024] invalid opcode: 0000 [#1] SMP [1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0 [1417839.517008] Code: ed e9 ... [1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202 [1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028 [1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0 [1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238 [1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000 [1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90 [1417839.651549] FS: 00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000 [1417839.669810] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0 [1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1417839.731320] Call Trace: [1417839.737103] release_extent_buffer+0x39/0x90 [1417839.746913] read_block_for_search.isra.38+0x2a3/0x370 [1417839.758645] btrfs_search_slot+0x260/0x9b0 [1417839.768054] btrfs_lookup_file_extent+0x4a/0x70 [1417839.778427] btrfs_get_extent+0x15f/0x830 [1417839.787665] ? submit_extent_page+0xc4/0x1c0 [1417839.797474] ? __do_readpage+0x299/0x7a0 [1417839.806515] __do_readpage+0x33b/0x7a0 [1417839.815171] ? btrfs_releasepage+0x70/0x70 [1417839.824597] extent_readpages+0x28f/0x400 [1417839.833836] read_pages+0x6a/0x1c0 [1417839.841729] ? startup_64+0x2/0x30 [1417839.849624] __do_page_cache_readahead+0x13c/0x1a0 [1417839.860590] filemap_fault+0x6c7/0x990 [1417839.869252] ? xas_load+0x8/0x80 [1417839.876756] ? xas_find+0x150/0x190 [1417839.884839] ? filemap_map_pages+0x295/0x3b0 [1417839.894652] __do_fault+0x32/0x110 [1417839.902540] __handle_mm_fault+0xacd/0x1000 [1417839.912156] handle_mm_fault+0xaa/0x1c0 [1417839.921004] __do_page_fault+0x242/0x4b0 [1417839.930044] ? page_fault+0x8/0x30 [1417839.937933] page_fault+0x1e/0x30 [1417839.945631] RIP: 0033:0x33c4bae [1417839.952927] Code: Bad RIP value. [1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206 [1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000 [1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 [1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8 [1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79 [1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40 CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 5317abc4 which is commit 2bbcaaee upstream. It is being reverted upstream, just hasn't made it there yet and is causing lots of problems. Reported-by:
Hans de Goede <hdegoede@redhat.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Paolo Bonzini authored
commit 5ecad245 upstream. Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but reserves it in PML4Es. Probably, earlier versions of the AMD manual documented it as reserved in PDPEs as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it. Cc: stable@vger.kernel.org Reported-by:
Nadav Amit <namit@vmware.com> Fixes: a0c0feb5 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03) Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Will Deacon authored
commit 68cf6173 upstream. PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1 pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set. Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits at EL2. Acked-by:
Marc Zyngier <maz@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708162546.26176-1-will@kernel.orgSigned-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Hector Martin authored
commit e337bf19 upstream. These devices claim to be 96kHz mono, but actually are 48kHz stereo with swapped channels and unaligned transfers. Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200702071433.237843-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit 6a6ca788 upstream. We have a Dell AIO, there is neither internal speaker nor internal mic, only a multi-function audio jack on it. Users reported that after freshly installing the OS and plug a headset to the audio jack, the headset can't output sound. I reproduced this bug, at that moment, the Input Source is as below: Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Headphone Mic' 'Headset Mic' Item0: 'Headphone Mic' That is because the patch_realtek will set this audio jack as mic_in mode if Input Source's value is hp_mic. If it is not fresh installing, this issue will not happen since the systemd will run alsactl restore -f /var/lib/alsa/asound.state, this will set the 'Input Source' according to history value. If there is internal speaker or internal mic, this issue will not happen since there is valid sink/source in the pulseaudio, the PA will set the 'Input Source' according to active_port. To fix this issue, change the parser function to let the hs_mic be stored ahead of hp_mic. Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200625083833.11264-1-hui.wang@canonical.comSigned-off-by:
-
xidongwang authored
commit ad155712 upstream. The stack object “info” in snd_opl3_ioctl() has a leaking problem. It has 2 padding bytes which are not initialized and leaked via “copy_to_user”. Signed-off-by:
xidongwang <wangxidong_97@163.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1594006058-30362-1-git-send-email-wangxidong_97@163.comSigned-off-by:
-
Nicolas Ferre authored
[ Upstream commit ced4799d ] Change the way the "magic-packet" DT property is handled in the macb_probe() function, matching DT binding documentation. Now we mark the device as "wakeup capable" instead of calling the device_init_wakeup() function that would enable the wakeup source. For Ethernet WoL, enabling the wakeup_source is done by using ethtool and associated macb_set_wol() function that already calls device_set_wakeup_enable() for this purpose. That would reduce power consumption by cutting more clocks if "magic-packet" property is set but WoL is not configured by ethtool. Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Davide Caratti authored
[ Upstream commit c8b1d743 ] we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence: # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on will cause a kernel crash similar to this: bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by:
Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Wei Li authored
[ Upstream commit 8523c006 ] After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4f ("arm64: KGDB: Add step debugging support") Signed-off-by:
Wei Li <liwei391@huawei.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Vinod Koul authored
[ Upstream commit f79a732a ] On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING state, so set that for partially draining streams in snd_compr_drain_notify() and use a flag for partially draining streams While at it, add locks for stream state change in snd_compr_drain_notify() as well. Fixes: f44f2a54 ("ALSA: compress: fix drain calls blocking other compress functions (v6)") Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.orgSigned-off-by:
-
Andre Edich authored
[ Upstream commit 3ed58f96 ] In a case where the ID_REV register read is failed, the memory for a private data structure has to be freed before returning error from the function smsc95xx_bind. Fixes: bbd9f9ee ("smsc95xx: add wol support for more frame types") Signed-off-by:
Andre Edich <andre.edich@microchip.com> Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by:
-
Andre Edich authored
[ Upstream commit 7c8b1e85 ] The return value of the function smsc95xx_reset() must be checked to avoid returning false success from the function smsc95xx_bind(). Fixes: 2f7ca802 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by:
-
Li Heng authored
[ Upstream commit 8a259e6b ] t4_prep_fw goto bye tag with positive return value when something bad happened and which can not free resource in adap_init0. so fix it to return negative value. Fixes: 16e47624 ("cxgb4: Add new scheme to update T4/T5 firmware") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Li Heng <liheng40@huawei.com> Signed-off-by:
-
Tomas Henzl authored
[ Upstream commit afe89f11 ] The sense data buffer in sense_buf_pool is allocated with size of MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96) is used when reading the data. That may lead to a read from unallocated area, sometimes from another (unallocated) page. To fix this, limit the read size to MPT_SENSE_BUFFER_ALLOC. Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.comCo-developed-by:
Stanislav Saner <ssaner@redhat.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
yu kuai authored
[ Upstream commit 48454460 ] if of_find_device_by_node() succeed, imx6q_suspend_init() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Signed-off-by:
yu kuai <yukuai3@huawei.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Zhang Xiaoxu authored
[ Upstream commit 5618303d ] As the man description of the truncate, if the size changed, then the st_ctime and st_mtime fields should be updated. But in cifs, we doesn't do it. It lead the xfstests generic/313 failed. So, add the ATTR_MTIME|ATTR_CTIME flags on attrs when change the file size Reported-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 998f5bbe ] Currently if early_pgm_check_handler is called it ends up in pgm check loop. The problem is that early_pgm_check_handler is instrumented by KASAN but executed without DAT flag enabled which leads to addressing exception when KASAN checks try to access shadow memory. Fix that by executing early handlers with DAT flag on under KASAN as expected. Reported-and-tested-by:
Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Zhenzhong Duan authored
[ Upstream commit 06096cc6 ] If an spi device is unbounded from the driver before the release process, there will be an NULL pointer reference when it's referenced in spi_slave_abort(). Fix it by checking it's already freed before reference. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Link: https://lore.kernel.org/r/20200618032125.4650-2-zhenzhong.duan@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Zhenzhong Duan authored
[ Upstream commit abd42781 ] Imagine below scene, spidev is referenced after it's freed. spidev_release() spidev_remove() ... spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; spin_unlock_irq(&spidev->spi_lock); mutex_lock(&device_list_lock); dofree = (spidev->spi == NULL); if (dofree) kfree(spidev); mutex_unlock(&device_list_lock); mutex_lock(&device_list_lock); list_del(&spidev->device_entry); device_destroy(spidev_class, spidev->devt); clear_bit(MINOR(spidev->devt), minors); if (spidev->users == 0) kfree(spidev); mutex_unlock(&device_list_lock); Fix it by resetting spidev->spi in device_list_lock's protection. Signed-off-by:
-
Thierry Reding authored
[ Upstream commit d9a0a05b ] Currently when a host1x device driver is unregistered, it is not detached from the host1x controller, which means that the device will stay around and when the driver is registered again, it may bind to the old, stale device rather than the new one that was created from scratch upon driver registration. This in turn can cause various weird crashes within the driver core because it is confronted with a device that was already deleted. Fix this by detaching the driver from the host1x controller when it is unregistered. This ensures that the deleted device also is no longer present in the device list that drivers will bind to. Reported-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Tested-by:
-
Christian Borntraeger authored
[ Upstream commit 77491129 ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.comSigned-off-by:
-
- 09 Jul, 2020 16 commits
-
-
Greg Kroah-Hartman authored
-
Peter Jones authored
commit 435d1a47 upstream. In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables are tied to specific Kconfig options. Currently this is not the case for modifying the ACPI SSDT via the efivar_ssdt kernel command line option and associated EFI variable. This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults disabled, in order to allow enabling or disabling that feature during the build. Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Jones <pjones@redhat.com> Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.comSigned-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Vasily Averin authored
Could you please push this patch into stable@? it fixes memory corruption in kernels v3.5 .. v4.10 Lost .data_len definition leads to write beyond end of struct nf_ct_h323_master. Usually it corrupts following struct nf_conn_nat, however if nat is not loaded it corrupts following slab object. In mainline this problem went away in v4.11, after commit 9f0f3ebe ("netfilter: helpers: remove data_len usage for inkernel helpers") however many stable kernels are still affected. Fixes: 1afc5679 ("netfilter: nf_ct_helper: implement variable length helper private data") # v3.5 cc: stable@vger.kernel.org Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Hauke Mehrtens authored
commit fcec538e upstream. This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011 ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd93 ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Zhang Xiaoxu authored
commit 9ffad926 upstream. When xfstest generic/035, we found the target file was deleted if the rename return -EACESS. In cifs_rename2, we unlink the positive target dentry if rename failed with EACESS or EEXIST, even if the target dentry is positived before rename. Then the existing file was deleted. We should just delete the target file which created during the rename. Reported-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Paul Aurich authored
commit 00dfbc2f upstream. Without this: - persistent handles will only be enabled for per-user tcons if the server advertises the 'Continuous Availabity' capability - resilient handles would never be enabled for per-user tcons Signed-off-by:
Paul Aurich <paul@darkrain42.org> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Paul Aurich authored
commit cc15461c upstream. Ensure multiuser SMB3 mounts use encryption for all users' tcons if the mount options are configured to require encryption. Without this, only the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user tcons would only be encrypted if the server was configured to require encryption. Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 5ef30e44 which is commit f0bd62b6 upstream. It causes a number of reported issues and a fix for it has not hit Linus's tree yet. Revert this to resolve those problems. Cc: Alexander Tsoy <alexander@tsoy.me> Cc: Takashi Iwai <tiwai@suse.de> Cc: Sasha Levin <sashal@kernel.org> Cc: Hans de Goede <jwrdegoede@fedoraproject.org> Signed-off-by:
-
Chris Packham authored
[ Upstream commit cd217f23 ] The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck low, this differs to the PCA9564 which uses 90h for this indication. Treat either 0x78 or 0x90 as an indication that the SCL line is stuck. Based on looking through the PCA9564 and PCA9665 datasheets this should be safe for both chips. The PCA9564 should not return 0x78 for any valid state and the PCA9665 should not return 0x90. Fixes: eff9ec95 ("i2c-algo-pca: Add PCA9665 support") Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Hou Tao authored
[ Upstream commit e7eea44e ] Else there will be memory leak if alloc_disk() fails. Fixes: 6a27b656 ("block: virtio-blk: support multi virt queues per virtio-blk device") Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Misono Tomohiro authored
[ Upstream commit 8b97f992 ] Although it rarely happens, we should call free_capabilities() if error happens after read_capabilities() to free allocated strings. Fixes: de584afa ("hwmon driver for ACPI 4.0 power meters") Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Chu Lin authored
[ Upstream commit 016983d1 ] Per the datasheet for max6697, OVERT mask and ALERT mask are different. For example, the 7th bit of OVERT is the local channel but for alert mask, the 6th bit is the local channel. Therefore, we can't apply the same mask for both registers. In addition to that, the max6697 driver is supposed to be compatibale with different models. I manually went over all the listed chips and made sure all chip types have the same layout. Testing; mask value of 0x9 should map to 0x44 for ALERT and 0x84 for OVERT. I used iotool to read the reg value back to verify. I only tested this change on max6581. Reference: https://datasheets.maximintegrated.com/en/ds/MAX6581.pdf https://datasheets.maximintegrated.com/en/ds/MAX6697.pdf https://datasheets.maximintegrated.com/en/ds/MAX6699.pdfSigned-off-by:
Chu Lin <linchuyuan@google.com> Fixes: 5372d2d7 ("hwmon: Driver for Maxim MAX6697 and compatibles") Signed-off-by:
-
Rahul Lakkireddy authored
[ Upstream commit 27f78cb2 ] TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser. Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32 Fixes: 2e8aad7b ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Shile Zhang authored
[ Upstream commit 975e155e ] We added the 'sched_rr_timeslice_ms' SCHED_RR tuning knob in this commit: ce0dbbbb ("sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice") ... which name suggests to users that it's in milliseconds, while in reality it's being set in milliseconds but the result is shown in jiffies. This is obviously confusing when HZ is not 1000, it makes it appear like the value set failed, such as HZ=100: root# echo 100 > /proc/sys/kernel/sched_rr_timeslice_ms root# cat /proc/sys/kernel/sched_rr_timeslice_ms 10 Fix this to be milliseconds all around. Signed-off-by:
Shile Zhang <shile.zhang@nokia.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1485612049-20923-1-git-send-email-shile.zhang@nokia.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Herbert Xu authored
commit 34c86f4c upstream. The locking in af_alg_release_parent is broken as the BH socket lock can only be taken if there is a code-path to handle the case where the lock is owned by process-context. Instead of adding such handling, we can fix this by changing the ref counts to atomic_t. This patch also modifies the main refcnt to include both normal and nokey sockets. This way we don't have to fudge the nokey ref count when a socket changes from nokey to normal. Credits go to Mauricio Faria de Oliveira who diagnosed this bug and sent a patch for it: https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/Reported-by:
Brian Moyles <bmoyles@netflix.com> Reported-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Fixes: 37f96694 ("crypto: af_alg - Use bh_lock_sock in...") Cc: <stable@vger.kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 440ab9e1 ] At times when I'm using kgdb I see a splat on my console about suspicious RCU usage. I managed to come up with a case that could reproduce this that looked like this: WARNING: suspicious RCU usage 5.7.0-rc4+ #609 Not tainted ----------------------------- kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/0/1: #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac stack backtrace: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x1b8 show_stack+0x1c/0x24 dump_stack+0xd4/0x134 lockdep_rcu_suspicious+0xf0/0x100 find_task_by_pid_ns+0x5c/0x80 getthread+0x8c/0xb0 gdb_serial_stub+0x9d4/0xd04 kgdb_cpu_enter+0x284/0x7ac kgdb_handle_exception+0x174/0x20c kgdb_brk_fn+0x24/0x30 call_break_hook+0x6c/0x7c brk_handler+0x20/0x5c do_debug_exception+0x1c8/0x22c el1_sync_handler+0x3c/0xe4 el1_sync+0x7c/0x100 rpmh_rsc_probe+0x38/0x420 platform_drv_probe+0x94/0xb4 really_probe+0x134/0x300 driver_probe_device+0x68/0x100 __device_attach_driver+0x90/0xa8 bus_for_each_drv+0x84/0xcc __device_attach+0xb4/0x13c device_initial_probe+0x18/0x20 bus_probe_device+0x38/0x98 device_add+0x38c/0x420 If I understand properly we should just be able to blanket kgdb under one big RCU read lock and the problem should go away. We'll add it to the beast-of-a-function known as kgdb_cpu_enter(). With this I no longer get any splats and things seem to work fine. Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
