- 27 Mar, 2020 1 commit
-
-
Greg Kroah-Hartman authored
This reverts commit c442a0d1 as it breaks some of the Raspberry Pi devices. Marek writes: This patch has just landed in linux-next 20200326. Sadly it breaks booting of the Raspberry Pi3b and Pi4 boards, either in 32bit or 64bit mode. There is no warning nor panic message, just a silent freeze. The last message shown on the earlycon is: [ 0.893217] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled so revert it for now and let's try again and add it to linux-next after 5.7-rc1 is out so that we can try to get more debugging/testing happening. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Saravana Kannan <saravanak@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 Mar, 2020 4 commits
-
-
Saravana Kannan authored
Set fw_devlink to "permissive" behavior by default so that device links are automatically created (with DL_FLAG_SYNC_STATE_ONLY) by scanning the firmware. This ensures suppliers get their sync_state() calls only after all their consumers have probed successfully. Without this, suppliers will get their sync_state() calls at late_initcall_sync() even if their consuer Ideally, we'd want to set fw_devlink to "on" or "rpm" by default. But that needs more testing as it's known to break some corner case drivers/platforms. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Signed-off-by:
Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200321210305.28937-1-saravanak@google.comSigned-off-by:
-
Andy Shevchenko authored
There is a place in the code where open-coded version of list entry accessors list_last_entry() is used. Replace that with the standard macro. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200324122023.9649-3-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Between printing the debug message and actual check atomic counter can be altered. For better debugging experience read atomic counter value only once. Signed-off-by:
Ferry Toth <fntoth@gmail.com> Link: https://lore.kernel.org/r/20200324122023.9649-2-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Eric Biggers authored
Reading from a debugfs file at a nonzero position, without first reading at position 0, leaks uninitialized memory to userspace. It's a bit tricky to do this, since lseek() and pread() aren't allowed on these files, and write() doesn't update the position on them. But writing to them with splice() *does* update the position: #define _GNU_SOURCE 1 #include <fcntl.h> #include <stdio.h> #include <unistd.h> int main() { int pipes[2], fd, n, i; char buf[32]; pipe(pipes); write(pipes[1], "0", 1); fd = open("/sys/kernel/debug/fault_around_bytes", O_RDWR); splice(pipes[0], NULL, fd, NULL, 1, 0); n = read(fd, buf, sizeof(buf)); for (i = 0; i < n; i++) printf("%02x", buf[i]); printf("\n"); } Output: 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a30 Fix the infoleak by making simple_attr_read() always fill simple_attr::get_buf if it hasn't been filled yet. Reported-by: syzbot+fcab69d1ada3e8d6f06b@syzkaller.appspotmail.com Reported-by:Alexander Potapenko <glider@google.com> Fixes: acaefc25 ("[PATCH] libfs: add simple attribute files") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200308023849.988264-1-ebiggers@kernel.orgSigned-off-by:
-
- 21 Mar, 2020 1 commit
-
-
Saravana Kannan authored
Sometimes, more than one (generally two) device can point to the same fwnode. However, only one device is set as the fwnode's device (fwnode->dev) and can be looked up from the fwnode. Typically, only one of these devices actually have a driver and actually probe. If we create device links for all these devices, then the suppliers' of these devices (with the same fwnode) will never get a sync_state() call because one of their consumer devices will never probe (because they don't have a driver). So, create device links only for the device that is considered as the fwnode's device. One such example of this is the PCI bridge platform_device and the corresponding pci_bus device. Both these devices will have the same fwnode. It's the platform_device that is registered first and is set as the fwnode's device. Also the platform_device is the one that actually probes. Without this patch none of the suppliers of a PCI bridge platform_device would get a sync_state() callback. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
- 20 Mar, 2020 8 commits
-
-
Hans de Goede authored
Add touchscreen info for the Chuwi Vi8 Plus tablet. This tablet uses a Chipone ICN8505 touchscreen controller, with the firmware used by the touchscreen embedded in the EFI firmware. Acked-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-11-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Sofar we have been unable to get permission from the vendors to put the firmware for touchscreens listed in touchscreen_dmi in linux-firmware. Some of the tablets with such a touchscreen have a touchscreen driver, and thus a copy of the firmware, as part of their EFI code. This commit adds the necessary info for the new EFI embedded-firmware code to extract these firmwares, making the touchscreen work OOTB without the user needing to manually add the firmware. Acked-by:
-
Hans de Goede authored
Unfortunately sofar we have been unable to get permission to redistribute icn8505 touchscreen firmwares in linux-firmware. This means that people need to find and install the firmware themselves before the touchscreen will work Some UEFI/x86 tablets with an icn8505 touchscreen have a copy of the fw embedded in their UEFI boot-services code. This commit makes the icn8505 driver use the new firmware_request_platform function, which will fallback to looking for such an embedded copy when direct filesystem lookup fails. This will make the touchscreen work OOTB on devices where there is a fw copy embedded in the UEFI code. Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
Unfortunately sofar we have been unable to get permission to redistribute Silead touchscreen firmwares in linux-firmware. This means that people need to find and install the firmware themselves before the touchscreen will work Some UEFI/x86 tablets with a Silead touchscreen have a copy of the fw embedded in their UEFI boot-services code. This commit makes the silead driver use the new firmware_request_platform function, which will fallback to looking for such an embedded copy when direct filesystem lookup fails. This will make the touchscreen work OOTB on devices where there is a fw copy embedded in the UEFI code. Acked-by:
-
Hans de Goede authored
Add tests cases for checking the new firmware_request_platform api. Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20200115163554.101315-7-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Add support for testing firmware_request_platform through a new trigger_request_platform trigger. Signed-off-by:
-
Hans de Goede authored
In some cases the platform's main firmware (e.g. the UEFI fw) may contain an embedded copy of device firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons: 1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer. 2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these. This commit adds a new platform fallback mechanism to the firmware loader which will try to lookup a device fw copy embedded in the platform's main firmware if direct filesystem lookup fails. Drivers which need such embedded fw copies can enable this fallback mechanism by using the new firmware_request_platform() function. Note that for now this is only supported on EFI platforms and even on these platforms firmware_fallback_platform() only works if CONFIG_EFI_EMBEDDED_FIRMWARE is enabled (this gets selected by drivers which need this), in all other cases firmware_fallback_platform() simply always returns -ENOENT. Reported-by:
Dave Olsthoorn <dave@bewaar.me> Suggested-by:
Peter Jones <pjones@redhat.com> Acked-by:
-
Greg Kroah-Hartman authored
Merge tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into driver-core-next Ard writes: Stable shared branch between EFI and driver tree Stable shared branch to ease the integration of Hans's series to support device firmware loaded from EFI boot service memory regions. [PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support https://lore.kernel.org/linux-efi/20200115163554.101315-1-hdegoede@redhat.com/ * tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Add embedded peripheral firmware support efi: Export boot-services code and data as debugfs-blobs
-
- 19 Mar, 2020 1 commit
-
-
Greg Kroah-Hartman authored
This reverts commit 8ba88804 as a better version is already in Rafael's tree, sorry about that. Reported-by:
"Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by:
-
- 18 Mar, 2020 6 commits
-
-
Madhuparna Bhowmik authored
Pass cond argument to list_for_each_entry_rcu() to fix the following false positive lockdep warning and other uses of list_for_each_entry_rcu() in wakeup.c. [ 331.934648] ============================= [ 331.934650] WARNING: suspicious RCU usage [ 331.934653] 5.6.0-rc1+ #5 Not tainted [ 331.934655] ----------------------------- [ 331.934657] drivers/base/power/wakeup.c:408 RCU-list traversed in non-reader section!! [ 333.025156] ============================= [ 333.025161] WARNING: suspicious RCU usage [ 333.025168] 5.6.0-rc1+ #5 Not tainted [ 333.025173] ----------------------------- [ 333.025180] drivers/base/power/wakeup.c:424 RCU-list traversed in non-reader section!! Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200228174745.9308-1-madhuparnabhowmik10@gmail.comSigned-off-by:
-
Marco Felsch authored
The component framework reuses the devres managed functions. There is no need to specify an unbind() callback if the driver only wants to release the devres managed resources. The bind/unbind is like the probe/remove pair. The bind/probe is necessary and the unbind/remove is optional. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20200227104547.30085-1-m.felsch@pengutronix.deSigned-off-by:
-
Greg Kroah-Hartman authored
No one checks the return value of debugfs_create_file_size, as it's not needed, so make the return value void, so that no one tries to do so in the future. Signed-off-by:
-
Taehee Yoo authored
When the module is being removed, the module state is set to MODULE_STATE_GOING. At this point, try_module_get() fails. And when {full/open}_proxy_open() is being called, it calls try_module_get() to try to hold module reference count. If it fails, it warns about the possibility of debugfs file leak. If {full/open}_proxy_open() is called while the module is being removed, it fails to hold the module. So, It warns about debugfs file leak. But it is not the debugfs file leak case. So, this patch just adds module state checking routine in the {full/open}_proxy_open(). Test commands: #SHELL1 while : do modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device modprobe -rv netdevsim done #SHELL2 while : do cat /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ipsec done Splat looks like: [ 298.766738][T14664] debugfs file owner did not clean up at exit: ipsec [ 298.766766][T14664] WARNING: CPU: 2 PID: 14664 at fs/debugfs/file.c:312 full_proxy_open+0x10f/0x650 [ 298.768595][T14664] Modules linked in: netdevsim(-) openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 n][ 298.771343][T14664] CPU: 2 PID: 14664 Comm: cat Tainted: G W 5.5.0+ #1 [ 298.772373][T14664] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 298.773545][T14664] RIP: 0010:full_proxy_open+0x10f/0x650 [ 298.774247][T14664] Code: 48 c1 ea 03 80 3c 02 00 0f 85 c1 04 00 00 49 8b 3c 24 e8 e4 b5 78 ff 84 c0 75 2d 4c 89 ee 48 [ 298.776782][T14664] RSP: 0018:ffff88805b7df9b8 EFLAGS: 00010282[ 298.777583][T14664] RAX: dffffc0000000008 RBX: ffff8880511725c0 RCX: 0000000000000000 [ 298.778610][T14664] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8880540c5c14 [ 298.779637][T14664] RBP: 0000000000000000 R08: fffffbfff15235ad R09: 0000000000000000 [ 298.780664][T14664] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffffc06b5000 [ 298.781702][T14664] R13: ffff88804c234a88 R14: ffff88804c22dd00 R15: ffffffff8a1b5660 [ 298.782722][T14664] FS: 00007fafa13a8540(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 298.783845][T14664] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 298.784672][T14664] CR2: 00007fafa0e9cd10 CR3: 000000004b286005 CR4: 00000000000606e0 [ 298.785739][T14664] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 298.786769][T14664] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 298.787785][T14664] Call Trace: [ 298.788237][T14664] do_dentry_open+0x63c/0xf50 [ 298.788872][T14664] ? open_proxy_open+0x270/0x270 [ 298.789524][T14664] ? __x64_sys_fchdir+0x180/0x180 [ 298.790169][T14664] ? inode_permission+0x65/0x390 [ 298.790832][T14664] path_openat+0xc45/0x2680 [ 298.791425][T14664] ? save_stack+0x69/0x80 [ 298.791988][T14664] ? save_stack+0x19/0x80 [ 298.792544][T14664] ? path_mountpoint+0x2e0/0x2e0 [ 298.793233][T14664] ? check_chain_key+0x236/0x5d0 [ 298.793910][T14664] ? sched_clock_cpu+0x18/0x170 [ 298.794527][T14664] ? find_held_lock+0x39/0x1d0 [ 298.795153][T14664] do_filp_open+0x16a/0x260 [ ... ] Fixes: 9fd4dcec ("debugfs: prevent access to possibly dead file_operations at file open") Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20200218043150.29447-1-ap420073@gmail.comSigned-off-by:
-
Junyong Sun authored
fw_sysfs_wait_timeout may return err with -ENOENT at fw_load_sysfs_fallback and firmware is already in abort status, no need to abort again, so skip it. This issue is caused by concurrent situation like below: when thread 1# wait firmware loading, thread 2# may write -1 to abort loading and wakeup thread 1# before it timeout. so wait_for_completion_killable_timeout of thread 1# would return remaining time which is != 0 with fw_st->status FW_STATUS_ABORTED.And the results would be converted into err -ENOENT in __fw_state_wait_common and transfered to fw_load_sysfs_fallback in thread 1#. The -ENOENT means firmware status is already at ABORTED, so fw_load_sysfs_fallback no need to get mutex to abort again. ----------------------------- thread 1#,wait for loading fw_load_sysfs_fallback ->fw_sysfs_wait_timeout ->__fw_state_wait_common ->wait_for_completion_killable_timeout in __fw_state_wait_common, ... 93 ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout); 94 if (ret != 0 && fw_st->status == FW_STATUS_ABORTED) 95 return -ENOENT; 96 if (!ret) 97 return -ETIMEDOUT; 98 99 return ret < 0 ? ret : 0; ----------------------------- thread 2#, write -1 to abort loading firmware_loading_store ->fw_load_abort ->__fw_load_abort ->fw_state_aborted ->__fw_state_set ->complete_all in __fw_state_set, ... 111 if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED) 112 complete_all(&fw_st->completion); ------------------------------------------- BTW,the double abort issue would not cause kernel panic or create an issue, but slow down it sometimes.The change is just a minor optimization. Signed-off-by:Junyong Sun <sunjunyong@xiaomi.com> Acked-by:
-
Jeffy Chen authored
Add a sanity check before putting the cpu clk. Fixes: b8fe128d (“arch_topology: Adjust initial CPU capacities with current freq") Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Link: https://lore.kernel.org/r/20200317063308.23209-1-jeffy.chen@rock-chips.comSigned-off-by:
-
- 11 Mar, 2020 4 commits
-
-
Zeng Tao authored
Currently there are only 10 bytes to store the cpu-topology 'name' information. Only 10 bytes copied into cluster/thread/core names. If the cluster ID exceeds 2-digit number, it will result in the data corruption, and ending up in a dead loop in the parsing routines. The same applies to the thread names with more that 3-digit number. This issue was found using the boundary tests under virtualised environment like QEMU. Let us increase the buffer to fix such potential issues. Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1583294092-5929-1-git-send-email-prime.zeng@hisilicon.comSigned-off-by:
-
Jeffy Chen authored
The CPU freqs are not supposed to change before cpufreq policies properly registered, meaning that they should be used to calculate the initial CPU capacities. Doing this helps choosing the best CPU during early boot, especially for the initramfs decompressing. There's no functional changes for non-clk CPU DVFS mechanism. Signed-off-by:
-
Takashi Iwai authored
Use the simpler sprintf() instead of snprintf() or scnprintf() in a single-shot sysfs output callbacks where you are very sure that it won't go over PAGE_SIZE buffer limit. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311080207.12046-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
-
- 09 Mar, 2020 4 commits
-
-
Greg Kroah-Hartman authored
We need the driver core and debugfs changes in here as well. Signed-off-by: -
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We've been accruing these for a couple of weeks, so the batch is a bit bigger than usual. Largest delta is due to a led-bl driver that is added -- there was a miscommunication before the merge window and the driver didn't make it in. Due to this, the platforms needing it regressed. At this point, it seemed easier to add the new driver than unwind the changes. Besides that, there are a handful of various fixes: - AMD tee memory leak fix - A handful of fixlets for i.MX SCU communication - A few maintainers woke up and realized DEBUG_FS had been missing for a while, so a few updates of that. ... and the usual collection of smaller fixes to various platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits) ARM: socfpga_defconfig: Add back DEBUG_FS arm64: dts: socfpga: agilex: Fix gmac compatible ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED tee: amdtee: fix memory leak in amdtee_open_session() ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "Error reporting fix for synopsys_edac: do not overwrite partial decoded error message (Sherry Sun)" * tag 'edac_urgent-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/synopsys: Do not print an error with back-to-back snprintf() calls
-
- 08 Mar, 2020 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are four small char/misc driver fixes for reported issues for 5.6-rc5. These fixes are: - binder fix for a potential use-after-free problem found (took two tries to get it right) - interconnect core fix - altera-stapl driver fix All four of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: prevent UAF for binderfs devices II interconnect: Handle memory allocation errors altera-stapl: altera_get_note: prevent write beyond end of 'key' binder: prevent UAF for binderfs devices -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core and debugfs fixes from Greg KH: "Here are four small driver core / debugfs patches for 5.6-rc3: - debugfs api cleanup now that all debugfs_create_regset32() callers have been fixed up. This was waiting until after the -rc1 merge as these fixes came in through different trees - driver core sync state fixes based on reports of minor issues found in the feature All of these have been in linux-next with no reported issues" * tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Skip unnecessary work when device doesn't have sync_state() driver core: Add dev_has_sync_state() driver core: Call sync_state() even if supplier has no consumers debugfs: remove return value of debugfs_create_regset32() -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty/serial fixes for 5.6-rc5 Just some small serial driver fixes, and a vt core fixup, full details are: - vt fixes for issues found by syzbot - serdev fix for Apple boxes - fsl_lpuart serial driver fixes - MAINTAINER update for incorrect serial files - new device ids for 8250_exar driver - mvebu-uart fix All of these have been in linux-next with no reported issues" * tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: fsl_lpuart: free IDs allocated by IDA Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE" serdev: Fix detection of UART devices on Apple machines. MAINTAINERS: Add missed files related to Synopsys DesignWare UART serial: 8250_exar: add support for ACCES cards tty:serial:mvebu-uart:fix a wrong return vt: selection, push sel_lock up vt: selection, push console lock down
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/PHY fixes from Greg KH: "Here are some small USB and PHY driver fixes for reported issues for 5.6-rc5. Included in here are: - phy driver fixes - new USB quirks - USB cdns3 gadget driver fixes - USB hub core fixes All of these have been in linux-next with no reported issues" * tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: gadget: Update chain bit correctly when using sg list usb: core: port: do error out if usb_autopm_get_interface() fails usb: core: hub: do error out if usb_autopm_get_interface() fails usb: core: hub: fix unhandled return by employing a void function usb: storage: Add quirk for Samsung Fit flash usb: quirks: add NO_LPM quirk for Logitech Screen Share usb: usb251xb: fix regulator probe and error handling phy: allwinner: Fix GENMASK misuse usb: cdns3: gadget: toggle cycle bit before reset endpoint usb: cdns3: gadget: link trb should point to next request phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling phy: brcm-sata: Correct MDIO operations for 40nm platforms phy: ti: gmii-sel: do not fail in case of gmii phy: ti: gmii-sel: fix set of copy-paste errors phy: core: Fix phy_get() to not return error on link creation failure phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing particularly exciting, some small ODP regressions from the mmu notifier rework, another bunch of syzkaller fixes, and a bug fix for a botched syzkaller fix in the first rc pull request. - Fix busted syzkaller fix in 'get_new_pps' - this turned out to crash on certain HW configurations - Bug fixes for various missed things in error unwinds - Add a missing rcu_read_lock annotation in hfi/qib - Fix two ODP related regressions from the recent mmu notifier changes - Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm - Revert an old patch in CMA as it is now shown to not be allocating port numbers properly" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/iwcm: Fix iwcm work deallocation RDMA/siw: Fix failure handling during device creation RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing RDMA/odp: Ensure the mm is still alive before creating an implicit child RDMA/core: Fix protection fault in ib_mr_pool_destroy IB/mlx5: Fix implicit ODP race IB/hfi1, qib: Ensure RCU is locked when accessing list RDMA/core: Fix pkey and port assignment in get_new_pps RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen() RDMA/rw: Fix error flow during RDMA context initialization RDMA/core: Fix use of logical OR in get_new_pps Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"
-
- 07 Mar, 2020 6 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Here are a few io_uring fixes that should go into this release. This contains: - Removal of (now) unused io_wq_flush() and associated flag (Pavel) - Fix cancelation lockup with linked timeouts (Pavel) - Fix for potential use-after-free when freeing percpu ref for fixed file sets - io-wq cancelation fixups (Pavel)" * tag 'io_uring-5.6-2020-03-07' of git://git.kernel.dk/linux-block: io_uring: fix lockup with timeouts io_uring: free fixed_file_data after RCU grace period io-wq: remove io_wq_flush and IO_WQ_WORK_INTERNAL io-wq: fix IO_WQ_WORK_NO_CANCEL cancellation -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Here are a few fixes that should go into this release. This contains: - Revert of a bad bcache patch from this merge window - Removed unused function (Daniel) - Fixup for the blktrace fix from Jan from this release (Cengiz) - Fix of deeper level bfqq overwrite in BFQ (Carlo)" * tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block: block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group() blktrace: fix dereference after null check Revert "bcache: ignore pending signals when creating gc and allocator thread" block: Remove used kblockd_schedule_work_on()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - a fix for the media controller links in both hantro driver and in v4l2-mem2mem core - some fixes for the pulse8-cec driver - vicodec: handle alpha channel for RGB32 formats, as it may be used - mc-entity.c: fix handling of pad flags * tag 'media/v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: hantro: Fix broken media controller links media: mc-entity.c: use & to check pad flags, not == media: v4l2-mem2mem.c: fix broken links media: vicodec: process all 4 components for RGB32 formats media: pulse8-cec: close serio in disconnect, not adap_free media: pulse8-cec: INIT_DELAYED_WORK was called too late
-
Pavel Begunkov authored
There is a recipe to deadlock the kernel: submit a timeout sqe with a linked_timeout (e.g. test_single_link_timeout_ception() from liburing), and SIGKILL the process. Then, io_kill_timeouts() takes @ctx->completion_lock, but the timeout isn't flagged with REQ_F_COMP_LOCKED, and will try to double grab it during io_put_free() to cancel the linked timeout. Probably, the same can happen with another io_kill_timeout() call site, that is io_commit_cqring(). Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Fix panic in gup_fast on large pud by providing an implementation of pud_write. This has been overlooked during migration to common gup code. - Fix unexpected write combining on PCI stores. * tag 's390-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix unexpected write combine on resource s390/mm: fix panic in gup_fast on large pud
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.6: - One fix for a recent regression to our breakpoint/watchpoint code. - Another fix for our KUAP support, this time a missing annotation in a rarely used path in signal handling. - A fix for our handling of a CPU feature that effects the PMU, when booting guests in some configurations. - A minor fix to our linker script to explicitly include the .BTF section. Thanks to: Christophe Leroy, Desnes A. Nunes do Rosario, Leonardo Bras, Naveen N. Rao, Ravi Bangoria, Stefan Berger" * tag 'powerpc-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix missing KUAP disable in flush_coherent_icache() powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems powerpc: Include .BTF section powerpc/watchpoint: Don't call dar_within_range() for Book3S
-
