- 14 May, 2020 40 commits
-
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 0a944e8a upstream. Since the journal inode is already checked when we added it to the block validity's system zone, if we check it again, we'll just trigger a failure. This was causing failures like this: [ 53.897001] EXT4-fs error (device sda): ext4_find_extent:909: inode #8: comm jbd2/sda-8: pblk 121667583 bad header/extent: invalid extent entries - magic f30a, entries 8, max 340(340), depth 0(0) [ 53.931430] jbd2_journal_bmap: journal block not found at offset 49 on sda-8 [ 53.938480] Aborting journal on device sda-8. ... but only if the system was under enough memory pressure that logical->physical mapping for the journal inode gets pushed out of the extent cache. (This is why it wasn't noticed earlier.) Fixes: 345c0dbf ("ext4: protect journal inode's blocks using block_validity") Reported-by:
Dan Rue <dan.rue@linaro.org> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Tested-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Ashwin H <ashwinh@vmware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 345c0dbf upstream. Add the blocks which belong to the journal inode to block_validity's system zone so attempts to deallocate or overwrite the journal due a corrupted file system where the journal blocks are also claimed by another inode. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202879Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 8a363970 upstream. If we receive a file handle, either from NFS or open_by_handle_at(2), and it points at an inode which has not been initialized, and the file system has metadata checksums enabled, we shouldn't try to get the inode, discover the checksum is invalid, and then declare the file system as being inconsistent. This can be reproduced by creating a test file system via "mke2fs -t ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that directory, and then running the following program. #define _GNU_SOURCE #include <fcntl.h> struct handle { struct file_handle fh; unsigned char fid[MAX_HANDLE_SZ]; }; int main(int argc, char **argv) { struct handle h = {{8, 1 }, { 12, }}; open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY); return 0; } Google-Bug-Id: 120690101 Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1878098 [ Upstream commit 907ea529 ] If the in-core buddy bitmap gets corrupted (or out of sync with the block bitmap), issue a WARN_ON and try to recover. In most cases this involves skipping trying to allocate out of a particular block group. We can end up declaring the file system corrupted, which is fair, since the file system probably should be checked before we proceed any further. Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu Google-Bug-Id: 34811296 Google-Bug-Id: 34639169 Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1878098 [ Upstream commit 6b51fd3f ] xenbus_map_ring_valloc() maps a ring page and returns the status of the used grant (0 meaning success). There are Xen hypervisors which might return the value 1 for the status of a failed grant mapping due to a bug. Some callers of xenbus_map_ring_valloc() test for errors by testing the returned status to be less than zero, resulting in no error detected and crashing later due to a not available ring page. Set the return value of xenbus_map_ring_valloc() to GNTST_general_error in case the grant status reported by Xen is greater than zero. This is part of XSA-316. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.comSigned-off-by:
-
Bodo Stroesser authored
BugLink: https://bugs.launchpad.net/bugs/1878098 [ Upstream commit 8fed04eb ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.comSigned-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Luke Nelson authored
BugLink: https://bugs.launchpad.net/bugs/1878098 [ Upstream commit aee194b1 ] This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.comSigned-off-by:
-
Ian Rogers authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit f3bed55e upstream. Current logic yields the child task as the parent. Before: $ perf record bash -c "perf list > /dev/null" $ perf script -D |grep 'FORK\|EXIT' 4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470) 4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472) 4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470) ^ Note the repeated values here -------------------/ After: 383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266) 383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266) 383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265) Fixes: 94d5d1b2 ("perf_counter: Report the cloning task as parent on perf_counter_fork()") Reported-by:
KP Singh <kpsingh@google.com> Signed-off-by:
Ian Rogers <irogers@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200417182842.12522-1-irogers@google.comSigned-off-by:
-
Jason Gunthorpe authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit c799fca8 upstream. Positive return values are also failures that don't set val, although this probably can't happen. Fixes gcc 10 warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] 3747 | *phy_fw_ver = val; Fixes: 01b69614 ("cxgb4: Add PHY firmware support for T420-BT cards") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 09b04abb upstream. When building with Clang + -Wtautological-pointer-compare: drivers/usb/gadget/udc/bdc/bdc_ep.c:543:28: warning: comparison of address of 'req->queue' equal to a null pointer is always false [-Wtautological-pointer-compare] if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) ~~~~~^~~~~ ~~~~ drivers/usb/gadget/udc/bdc/bdc_ep.c:543:51: warning: comparison of address of 'req->usb_req' equal to a null pointer is always false [-Wtautological-pointer-compare] if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) ~~~~~^~~~~~~ ~~~~ 2 warnings generated. As it notes, these statements will always evaluate to false so remove them. Fixes: efed421a ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Link: https://github.com/ClangBuiltLinux/linux/issues/749Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Liu Jian authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit d9b8a67b upstream. In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae107("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by:
Yi Huaijie <yihuaijie@huawei.com> Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 2d84a2d1 upstream. In current fuse_drop_waiting() implementation it's possible that fuse_wait_aborted() will not be woken up in the unlikely case that fuse_abort_conn() + fuse_wait_aborted() runs in between checking fc->connected and calling atomic_dec(&fc->num_waiting). Do the atomic_dec_and_test() unconditionally, which also provides the necessary barrier against reordering with the fc->connected check. The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE barrier after resetting fc->connected. However, this is not a performance sensitive path, and adding the explicit barrier makes it easier to document. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: b8f95e5d ("fuse: umount should wait for all requests") Cc: <stable@vger.kernel.org> #v4.19 Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit a8dd3979 upstream. Commit d04adf1b ("sctp: reset owner sk for data chunks on out queues when migrating a sock") made a mistake that using 'list' as the param of list_for_each_entry to traverse the retransmit, sacked and abandoned queues, while chunks are using 'transmitted_list' to link into these queues. It could cause NULL dereference panic if there are chunks in any of these queues when peeling off one asoc. So use the chunk member 'transmitted_list' instead in this patch. Fixes: d04adf1b ("sctp: reset owner sk for data chunks on out queues when migrating a sock") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Clement Leger authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 00a0eec5 upstream. Index of rvring is computed using pointer arithmetic. However, since rvring->rvdev->vring is the base of the vring array, computation of rvring idx should be reversed. It previously lead to writing at negative indices in the resource table. Signed-off-by:
Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20191004073736.8327-1-cleger@kalray.euSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Udipto Goswami authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 1c2e54fb upstream. For userspace functions using OS Descriptors, if a function also supplies Extended Property descriptors currently the counts and lengths stored in the ms_os_descs_ext_prop_{count,name_len,data_len} variables are not getting reset to 0 during an unbind or when the epfiles are closed. If the same function is re-bound and the descriptors are re-written, this results in those count/length variables to monotonically increase causing the VLA allocation in _ffs_func_bind() to grow larger and larger at each bind/unbind cycle and eventually fail to allocate. Fix this by clearing the ms_os_descs_ext_prop count & lengths to 0 in ffs_data_reset(). Fixes: f0175ab5 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Signed-off-by:
Udipto Goswami <ugoswami@codeaurora.org> Signed-off-by:
Sriharsha Allenki <sallenki@codeaurora.org> Reviewed-by:
Manu Gautam <mgautam@codeaurora.org> Link: https://lore.kernel.org/r/20200402044521.9312-1-sallenki@codeaurora.orgSigned-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit f6cc6093 upstream. A SCSI error handler and block runtime PM must not allocate memory with GFP_KERNEL. Furthermore they must not wait for tasks allocating memory with GFP_KERNEL. That means that they cannot share a workqueue with arbitrary tasks. Fix this for UAS using a private workqueue. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Fixes: f9dc024a ("uas: pre_reset and suspend: Fix a few races") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200415141750.811-2-oneukum@suse.comSigned-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 5963dec9 upstream. Once a device is gone, the internal state does not matter anymore. There is no need to spam the logs. Signed-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit ea81c348 upstream. conf.listen_interval can sometimes be zero causing wake_up_count to wrap around up to many beacons too late causing CTRL-EVENT-BEACON-LOSS as in. wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ] Fixes: 43c93d9b ("staging: vt6656: implement power saving code.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.comSigned-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 09057742 upstream. The drivers TBTT counter is not synchronized with mac80211 timestamp. Reorder the functions and use vnt_update_next_tbtt to do the final synchronize. Fixes: c1515879 ("staging: vt6656: implement TSF counter") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Xiyu Yang authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 332e0e17 upstream. comedi_open() invokes comedi_dev_get_from_minor(), which returns a reference of the COMEDI device to "dev" with increased refcount. When comedi_open() returns, "dev" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of comedi_open(). When "cfp" allocation is failed, the refcnt increased by comedi_dev_get_from_minor() is not decreased, causing a refcnt leak. Fix this issue by calling comedi_dev_put() on this error path when "cfp" allocation is failed. Fixes: 20f083c0 ("staging: comedi: prepare support for per-file read and write subdevices") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/1587361459-83622-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit ed87d33d upstream. The DT2815 analog output command is 16 bits wide, consisting of the 12-bit sample value in bits 15 to 4, the channel number in bits 3 to 1, and a voltage or current selector in bit 0. Both bytes of the 16-bit command need to be written in turn to a single 8-bit data register. However, the driver currently only writes the low 8-bits. It is broken and appears to have always been broken. Electronic copies of the DT2815 User's Manual seem impossible to find online, but looking at the source code, a best guess for the sequence the driver intended to use to write the analog output command is as follows: 1. Wait for the status register to read 0x00. 2. Write the low byte of the command to the data register. 3. Wait for the status register to read 0x80. 4. Write the high byte of the command to the data register. Step 4 is missing from the driver. Add step 4 to (hopefully) fix the driver. Also add a "FIXME" comment about setting bit 0 of the low byte of the command. Supposedly, it is used to choose between voltage output and current output, but the current driver always sets it to 1. Signed-off-by:
-
Ahmad Fatoum authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit f1baca88 upstream. 512a928a ("ARM: imx: build v7_cpu_resume() unconditionally") introduced an unintended linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. Fix this by having v7_cpu_resume() compiled only when cpu_resume() it calls is available as well. The C declaration for the function remains unguarded to avoid future code inadvertently using a stub and introducing a regression to the bug the original commit fixed. Cc: <stable@vger.kernel.org> Fixes: 512a928a ("ARM: imx: build v7_cpu_resume() unconditionally") Reported-by:
Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Tested-by:
Roland Hieber <rhi@pengutronix.de> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gyeongtaek Lee authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit ebf14747 upstream. snd_soc_dapm_kcontrol widget which is created by autodisable control should contain correct on_val, mask and shift because it is set when the widget is powered and changed value is applied on registers by following code in dapm_seq_run_coalesced(). mask |= w->mask << w->shift; if (w->power) value |= w->on_val << w->shift; else value |= w->off_val << w->shift; Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent double shift. And, on_val in dapm_kcontrol_set_value() is modified to get correct value in the dapm_seq_run_coalesced(). Signed-off-by:
Gyeongtaek Lee <gt82.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Paul Moore authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 763dafc5 upstream. Commit 75612528 ("audit: always check the netlink payload length in audit_receive_msg()") fixed a number of missing message length checks, but forgot to check the length of userspace generated audit records. The good news is that you need CAP_AUDIT_WRITE to submit userspace audit records, which is generally only given to trusted processes, so the impact should be limited. Cc: stable@vger.kernel.org Fixes: 75612528 ("audit: always check the netlink payload length in audit_receive_msg()") Reported-by: syzbot+49e69b4d71a420ceda3e@syzkaller.appspotmail.com Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 94f9c8c3 upstream. Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails to handle WRITE commands with the FUA bit set, even though it claims to support FUA. (Oddly enough, a later version of the same bridge, version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also oddly, the bridge _does_ support FUA when using the UAS transport instead of the Bulk-Only transport -- but this device was blacklisted for uas in commit bc3bdb12 ("usb-storage: Disable UAS on JMicron SATA enclosure") for apparently unrelated reasons.) This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA flag. This allows the bridge to work properly with usb-storage. Reported-and-tested-by:
Cyril Roelandt <tipecaml@gmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221613110.11262-100000@iolanthe.rowland.orgSigned-off-by:
-
Jiri Slaby authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 7127d243 upstream. init_r_port can access pc104 array out of bounds. pc104 is a 2D array defined to have 4 members. Each member has 8 submembers. * we can have more than 4 (PCI) boards, i.e. [board] can be OOB * line is not modulo-ed by anything, so the first line on the second board can be 4, on the 3rd 12 or alike (depending on previously registered boards). It's zero only on the first line of the first board. So even [line] can be OOB, quite soon (with the 2nd registered board already). This code is broken for ages, so just avoid the OOB accesses and don't try to fix it as we would need to find out the correct line number. Use the default: RS232, if we are out. Generally, if anyone needs to set the interface types, a module parameter is past the last thing that should be used for this purpose. The parameters' description says it's for ISA cards anyway. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200417105959.15201-2-jslaby@suse.czSigned-off-by:
-
Andrew Melnychenko authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 9a9fc42b upstream. If there is a lot(more then 16) of virtio-console devices or virtio_console module is reloaded - buffers 'vtermnos' and 'cons_ops' are overflowed. In older kernels it overruns spinlock which leads to kernel freezing: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 To reproduce the issue, you can try simple script that loads/unloads module. Something like this: while [ 1 ] do modprobe virtio_console sleep 2 modprobe -r virtio_console sleep 2 done Description of problem: Guest get 'Call Trace' when loading module "virtio_console" and unloading it frequently - clearly reproduced on kernel-4.18.0: [ 81.498208] ------------[ cut here ]------------ [ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0! [ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console] [ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1 [ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 81.520205] Workqueue: events control_work_handler [virtio_console] [ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 [ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282 [ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08 [ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053 [ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200 [ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000 [ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000 [ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0 [ 81.537283] Call Trace: [ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20 [ 81.539011] .slowpath+0x9/0xe [ 81.539585] hvc_alloc+0x25e/0x300 [ 81.540237] init_port_console+0x28/0x100 [virtio_console] [ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console] [ 81.542546] control_work_handler+0x70/0x10c [virtio_console] [ 81.543601] process_one_work+0x1a7/0x3b0 [ 81.544356] worker_thread+0x30/0x390 [ 81.545025] ? create_worker+0x1a0/0x1a0 [ 81.545749] kthread+0x112/0x130 [ 81.546358] ? kthread_flush_work_fn+0x10/0x10 [ 81.547183] ret_from_fork+0x22/0x40 [ 81.547842] ---[ end trace aa97649bd16c8655 ]--- [ 83.546539] general protection fault: 0000 [#1] SMP NOPTI [ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1 [ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0 [ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84 [ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202 [ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001 [ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000 [ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788 [ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07 [ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000 [ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000 [ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0 Signed-off-by:
Andrew Melnychenko <andrew@daynix.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200414191503.3471783-1-andrew@daynix.comSigned-off-by:
-
Uros Bizjak authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit fb56baae upstream. There is no reason to limit the use of do_machine_check to 64bit targets. MCE handling works for both target familes. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Fixes: a0861c02 ("KVM: Add VT-x machine check support") Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Message-Id: <20200414071414.45636-1-ubizjak@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit b6467ab1 upstream. Check that the resolved slot (somewhat confusingly named 'start') is a valid/allocated slot before doing the final comparison to see if the specified gfn resides in the associated slot. The resolved slot can be invalid if the binary search loop terminated because the search index was incremented beyond the number of used slots. This bug has existed since the binary search algorithm was introduced, but went unnoticed because KVM statically allocated memory for the max number of slots, i.e. the access would only be truly out-of-bounds if all possible slots were allocated and the specified gfn was less than the base of the lowest memslot. Commit 36947254 ("KVM: Dynamically size memslot array based on number of used slots") eliminated the "all possible slots allocated" condition and made the bug embarrasingly easy to hit. Fixes: 9c1a5d38 ("kvm: optimize GFN to memslot lookup with large slots amount") Reported-by: syzbot+d889b59b2bb87d4047a2@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200408064059.8957-2-sean.j.christopherson@intel.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Alexander Tsoy authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 1c826792 upstream. Many Focusrite devices supports a limited set of sample rates per altsetting. These includes audio interfaces with ADAT ports: - Scarlett 18i6, 18i8 1st gen, 18i20 1st gen; - Scarlett 18i8 2nd gen, 18i20 2nd gen; - Scarlett 18i8 3rd gen, 18i20 3rd gen; - Clarett 2Pre USB, 4Pre USB, 8Pre USB. Maximum rate is exposed in the last 4 bytes of Format Type descriptor which has a non-standard bLength = 10. Tested-by:
Alexey Skobkin <skobkin-ru@ya.ru> Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@tsoy.meSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Xiyu Yang authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 59e1947c upstream. snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which increases the refcount of the snd_usb_audio object "chip". When snd_microii_spdif_default_get() returns, local variable "chip" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of snd_microii_spdif_default_get(). When those error scenarios occur such as usb_ifnum_to_if() returns NULL, the function forgets to decrease the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak. Fix this issue by jumping to "end" label when those error scenarios occur. Fixes: 447d6275 ("ALSA: usb-audio: Add sanity checks for endpoint accesses") Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 7686e348 upstream. The error handling code in usX2Y_rate_set() may hit a potential NULL dereference when an error occurs before allocating all us->urb[]. Add a proper NULL check for fixing the corner case. Reported-by:
Lin Yi <teroincn@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200420075529.27203-1-tiwai@suse.deSigned-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 9f952e26 upstream. Commit 8099f58f ("USB: hub: Don't record a connect-change event during reset-resume") wasn't very well conceived. The problem it tried to fix was that if a connect-change event occurred while the system was asleep (such as a device disconnecting itself from the bus when it is suspended and then reconnecting when it resumes) requiring a reset-resume during the system wakeup transition, the hub port's change_bit entry would remain set afterward. This would cause the hub driver to believe another connect-change event had occurred after the reset-resume, which was wrong and would lead the driver to send unnecessary requests to the device (which could interfere with a firmware update). The commit tried to fix this by not setting the change_bit during the wakeup. But this was the wrong thing to do; it means that when a device is unplugged while the system is asleep, the hub driver doesn't realize anything has happened: The change_bit flag which would tell it to handle the disconnect event is clear. The commit needs to be reverted and the problem fixed in a different way. Fortunately an alternative solution was noted in the commit's Changelog: We can continue to set the change_bit entry in hub_activate() but then clear it when a reset-resume occurs. That way the the hub driver will see the change_bit when a device is disconnected but won't see it when the device is still present. That's what this patch does. Reported-and-tested-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Paul Zimmerman <pauldzim@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221602480.11262-100000@iolanthe.rowland.orgSigned-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 056ad39e upstream. FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by:
Kyungtae Kim <kt0755@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.orgSigned-off-by:
-
David Mosberger authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 5f2e5fb8 upstream. Restructure usb_sg_cancel() so we don't have to disable interrupts while cancelling the URBs. Suggested-by:
David Mosberger <davidm@egauge.net> Signed-off-by:
-
David Mosberger authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 98b74b0e upstream. usb_submit_urb() may take quite long to execute. For example, a single sg list may have 30 or more entries, possibly leading to that many calls to DMA-map pages. This can cause interrupt latency of several hundred micro-seconds. Avoid the problem by releasing the io->lock spinlock and re-enabling interrupts before calling usb_submit_urb(). This opens races with usb_sg_cancel() and sg_complete(). Handle those races by using usb_block_urb() to stop URBs from being submitted after usb_sg_cancel() or sg_complete() with error. Note that usb_unlink_urb() is guaranteed to return -ENODEV if !io->urbs[i]->dev and since the -ENODEV case is already handled, we don't have to check for !io->urbs[i]->dev explicitly. Before this change, reading 512MB from an ext3 filesystem on a USB memory stick showed a throughput of 12 MB/s with about 500 missed deadlines. With this change, reading the same file gave the same throughput but only one or two missed deadlines. Signed-off-by:
-
Jonathan Cox authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit be34a585 upstream. The Corsair K70 RGB RAPIDFIRE needs the USB_QUIRK_DELAY_INIT and USB_QUIRK_DELAY_CTRL_MSG to function or it will randomly not respond on boot, just like other Corsair keyboards Signed-off-by:
Jonathan Cox <jonathan@jdcox.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200410212427.2886-1-jonathan@jdcox.netSigned-off-by:
-
Changming Liu authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 2df7405f upstream. Change a bunch of arguments of wrapper functions which pass signed integer to an unsigned integer which might cause undefined behaviors when sign integer overflow. Signed-off-by:
Changming Liu <liu.changm@northeastern.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BL0PR06MB45482D71EA822D75A0E60A2EE5D50@BL0PR06MB4548.namprd06.prod.outlook.comSigned-off-by:
-
Piotr Krysiuk authored
BugLink: https://bugs.launchpad.net/bugs/1878098 A race condition between threads updating mountpoint reference counter affects longterm releases 4.4.220, 4.9.220, 4.14.177 and 4.19.118. The mountpoint reference counter corruption may occur when: * one thread increments m_count member of struct mountpoint [under namespace_sem, but not holding mount_lock] pivot_root() * another thread simultaneously decrements the same m_count [under mount_lock, but not holding namespace_sem] put_mountpoint() unhash_mnt() umount_mnt() mntput_no_expire() To fix this race condition, grab mount_lock before updating m_count in pivot_root(). Reference: CVE-2020-12114 Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Piotr Krysiuk <piotras@gmail.com> Signed-off-by:
-
Lars-Peter Clausen authored
BugLink: https://bugs.launchpad.net/bugs/1878098 commit 8bef455c upstream. The XADC has two internal ADCs. Depending on the mode it is operating in either one or both of them are used. The device manual calls this continuous (one ADC) and simultaneous (both ADCs) mode. The meaning of the sequencing register for the aux channels changes depending on the mode. In continuous mode each bit corresponds to one of the 16 aux channels. And the single ADC will convert them one by one in order. In simultaneous mode the aux channels are split into two groups the first 8 channels are assigned to the first ADC and the other 8 channels to the second ADC. The upper 8 bits of the sequencing register are unused and the lower 8 bits control both ADCs. This means a bit needs to be set if either the corresponding channel from the first group or the second group (or both) are set. Currently the driver does not have the special handling required for simultaneous mode. Add it. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
