- 20 Dec, 2017 40 commits
-
-
Alexander Shishkin authored
[ Upstream commit 340837f9 ] This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
[ Upstream commit 655d9ca9 ] The AMD ACP driver adds "-I../acp -I../acp/include" to the gcc command line, which makes no sense, since these are evaluated relative to the build directory. When we build with "make W=1", they instead cause a warning: cc1: error: ../acp/: No such file or directory [-Werror=missing-include-dirs] cc1: error: ../acp/include: No such file or directory [-Werror=missing-include-dirs] cc1: all warnings being treated as errors ../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o' failed ../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_device.o' failed ../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_kms.o' failed This removes the subdir-ccflags variable that evidently did not serve any purpose here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 1df2aded ] Before iterating over the the LL2 Rx ring, the ring's spinlock is taken via spin_lock_irqsave(). The actual processing of the packet [including handling by the protocol driver] is done without said lock, so qed releases the spinlock and re-claims it afterwards. Problem is that the final spin_lock_irqrestore() at the end of the iteration uses the original flags saved from the initial irqsave() instead of the flags from the most recent irqsave(). So it's possible that the interrupt status would be incorrect at the end of the processing. Fixes: 0a7fb11c ("qed: Add Light L2 support"); CC: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mintz, Yuval authored
[ Upstream commit 752ecb2d ] When receiving an Rx LL2 packet, qed fails to unmap the previous buffer. Fixes: 0a7fb11c ("qed: Add Light L2 support"); Signed-off-by:
-
Ram Amrani authored
[ Upstream commit f3e48119 ] The Doorbell HW block can be configured at a granularity of 16 x CIDs, so we need to make sure that the actual number of CIDs configured would be a multiplication of 16. Today, when RoCE is enabled - given that the number is unaligned, doorbelling the higher CIDs would fail to reach the firmware and would eventually timeout. Fixes: dbb799c3 ("qed: Initialize hardware for new protocols") Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit e9093b11 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans learning not being enabled for wider ranges than 255. Fixes: a4feea74 ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit f004ec06 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans not being enabled for wider ranges than 255. Fixes: b2e345f9 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions") Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 37c343b4 ] When we notify peers of potential changes, it's also good to update IGMP memberships. For example, during VM migration, updating IGMP memberships will redirect existing multicast streams to the VM at the new location. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit fa23b9d1 ] This driver uses the MSI domain but has no strict dependency on PCI_MSI, so we may run into a build failure when CONFIG_GENERIC_MSI_IRQ_DOMAIN is disabled: drivers/irqchip/irq-mvebu-odmi.c:152:15: error: variable 'odmi_msi_ops' has initializer but incomplete type static struct msi_domain_ops odmi_msi_ops = { ^~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:155:15: error: variable 'odmi_msi_domain_info' has initializer but incomplete type static struct msi_domain_info odmi_msi_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:3: error: 'struct msi_domain_info' has no member named 'flags' .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), ^~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function); did you mean 'MSI_FLAG_USE_DEF_DOM_OPS'? Selecting the option from this driver seems to solve this nicely, though I could not find any other instance of this in irqchip drivers. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Matthias Kaehlcke authored
[ Upstream commit 23f963e9 ] This fixes the following warning when building with clang and CONFIG_DMA_ENGINE_RAID=n : drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[2]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { ^ drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[3]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 6e526fdf ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. The endpoints are specifically dereferenced in the i2400m_bootrom_init path during probe (e.g. in i2400mu_tx_bulk_out). Fixes: f398e424 ("i2400m/USB: probe/disconnect, dev init/shutdown and reset backends") Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Tahsin Erdogan authored
[ Upstream commit 4a3a485b ] When WB_registered flag is not set, wb_queue_work() skips queuing the work, but does not perform the necessary clean up. In particular, if work->auto_free is true, it should free the memory. The leak condition can be reprouced by following these steps: mount /dev/sdb /mnt/sdb /* In qemu console: device_del sdb */ umount /dev/sdb Above will result in a wb_queue_work() call on an unregistered wb and thus leak memory. Reported-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit 0067d4b0 ] In case cpu was unplugged, we need to make sure not to assume that the tags for that cpu are still allocated. so check for null tags when reinitializing a tagset. Reported-by:
Yi Zhang <yizhan@redhat.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Hiroyuki Yokoyama authored
[ Upstream commit a1c2ff53 ] This patch fixes the problem that the missing value of the route path setting table and incorrect values are set in the CMD_ROUTE_SELECT register. Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> [Kuninori: shared data on MIX and non-MIX case] Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 4ca60d08 ] consider a bridge with mtu 9000, but end host sending smaller packets to another host with mtu < 9000. In this case, after reassembly, bridge+defrag would refragment, and then attempt to send the reassembled packet as long as it was below 9k. Instead we have to cap by the largest fragment size seen. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 9fa1d753 ] omap_gem_dmabuf_mmap() returns an error (with a WARN) when called for a buffer which is allocated with dma_alloc_*(). This prevents dmabuf mmap from working on SoCs without DMM, e.g. AM4 and OMAP3. I could not find any reason for omap_gem_dmabuf_mmap() rejecting such buffers, and just removing the if() fixes the limitation. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit a4c2a131 ] TUXEDO BU1406 does not implement active multiplexing mode properly, and takes around 550 ms in i8042_set_mux_mode(). Given that the device does not have external AUX port, there is no downside in disabling the MUX mode. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Suggested-by:
Vojtech Pavlik <vojtech@suse.cz> Reviewed-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 800a938f ] If you write "-2 -3 -4" to the "versions" file, it will notice that no versions are enabled, and nfsd_reset_versions() is called. This enables all major versions, not no minor versions. So we lose the invariant that NFSv4 is only advertised when at least one minor is enabled. Fix the code to explicitly enable minor versions for v4, change it to use nfsd_vers() to test and set, and simplify the code. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 928c6fb3 ] Current code will return 1 if the version is supported, and -1 if it isn't. This is confusing and inconsistent with the one place where this is used. So change to return 1 if it is supported, and zero if not. i.e. an error is never returned. Signed-off-by:
-
Dave Airlie authored
[ Upstream commit 607523d1 ] If we don't reset the chunk info in the error path, the subsequent fini path will double free. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Oleksandr Tyshchenko authored
[ Upstream commit a03849e7 ] Do a check for already installed leaf entry at the current level before dereferencing it in order to avoid walking the page table down with wrong pointer to the next level. Signed-off-by:
Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> CC: Will Deacon <will.deacon@arm.com> CC: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Daniel Jurgens authored
[ Upstream commit 5d47f6c8 ] When a PCI error is detected the PCI state could be corrupt, don't save it in that flow. Save the state after initialization. After restoring the PCI state during slot reset save it again, restoring the state destroys the previously saved state info. Fixes: 05ac2c0b ('net/mlx5: Fix race between PCI error handlers and health work') Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Paul Blakey authored
[ Upstream commit af363705 ] The autogroups list is a list of non overlapping group boundaries sorted by their start index. If the autogroups list wasn't empty and an empty group slot was found at the start of the list, the new group was added to the end of the list instead of the beginning, as the prev initializer was incorrect. When this was repeated, it caused multiple groups to have overlapping boundaries. Fixed that by correctly initializing the prev pointer to the start of the list. Fixes: eccec8da ('net/mlx5: Keep autogroups list ordered') Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 702f2ac8 ] The RxRPC ACK packet may contain an extension that includes the peer's current Rx window size for this call. We adjust the local Tx window size to match. However, the transmitter can stall if the receive window is reduced to 0 by the peer and then reopened. This is because the normal way that the transmitter is re-energised is by dropping something out of our Tx queue and thus making space. When a single gap is made, the transmitter is woken up. However, because there's nothing in the Tx queue at this point, this doesn't happen. To fix this, perform a wake_up() any time we see the peer's Rx window size increasing. The observable symptom is that calls start failing on ETIMEDOUT and the following: kAFS: SERVER DEAD state=-62 appears in dmesg. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 6be371b0 ] When using the internal PHY it must be powered up when the MII is probed or the PHY will not be detected. Since the PHY is powered up at reset this has not been a problem. However, when the kernel is restarted with kexec the PHY will likely be powered down when the kernel starts so it will not be detected and the Ethernet link will not be established. This commit explicitly powers up the internal PHY when the GENET driver is probed to correct this behavior. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 07c52d6a ] Add a spinlock to ensure that irq0_stat is not unintentionally altered as the result of preemption. Also removed unserviced irq0 interrupts and removed irq1_stat since there is no bottom half service for those interrupts. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Doug Berger authored
[ Upstream commit 7627409c ] Since the internal PHY is powered up during the open and resume functions it should be powered back down if the functions fail. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Doug Berger authored
[ Upstream commit eca4bad7 ] The reserved gphy_rev value of 0x01ff must be tested before the old or new scheme for GPHY major versioning are tested, otherwise it will be treated as 0xff00 according to the old scheme. Fixes: b04a2f5b ("net: bcmgenet: add support for new GENET PHY revision scheme") Signed-off-by:
-
Doug Berger authored
[ Upstream commit 1ad3d225 ] The gap between the Tx status counters and the Rx RUNT counters is now being added to allow correct reporting of the registers. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Doug Berger authored
[ Upstream commit ffff7132 ] The location of the RBUF overflow and error counters has moved between different version of the GENET MAC. This commit corrects the driver to read from the correct locations depending on the version of the GENET MAC. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Michael Chan authored
[ Upstream commit 520ad89a ] In some situations, the firmware will return 0 for autoneg supported speed. This may happen if the firmware detects no SFP module, for example. The driver should ignore this so that we don't end up with an invalid autoneg setting with nothing advertised. When SFP module is inserted, we'll get the updated settings from firmware at that time. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 9f138fa6 ] KMSAN reports a use of uninitialized memory in put_cmsg() because msg.msg_flags in recvfrom haven't been initialized properly. The flag values don't affect the result on this path, but it's still a good idea to initialize them explicitly. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Andrea Arcangeli authored
[ Upstream commit 46aa6a30 ] linux/tools/testing/selftests/vm $ make gcc -Wall -I ../../../../usr/include compaction_test.c -lrt -o /compaction_test /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied collect2: error: ld returned 1 exit status make: *** [../lib.mk:54: /compaction_test] Error 1 Since commit a8ba798b ("selftests: enable O and KBUILD_OUTPUT") selftests/vm build fails if run from the "selftests/vm" directory, but it works in the selftests/ directory. It's quicker to be able to do a local vm-only build after a tree wipe and this patch allows for it again. Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrea Arcangeli authored
[ Upstream commit 6bbc4a41 ] __do_fault assumes vmf->page has been initialized and is valid if VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf). handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities). This VM_FAULT_NOPAGE case is only invoked when signal are pending and it didn't matter for anonymous memory before. It only started to matter since shmem was introduced. hugetlbfs also takes a different path and doesn't exercise __do_fault. Link: http://lkml.kernel.org/r/20170228154201.GH5816@redhat.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by:
-
Guoqing Jiang authored
[ Upstream commit 9c8043f3 ] To avoid memory leak, we need to free the cinfo which is allocated when node join cluster. Reviewed-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Chunfeng Yun authored
[ Upstream commit 94a631d9 ] hcc_params is set in xhci_gen_setup() called from usb_add_hcd(), so checks the Maximum Primary Stream Array Size in the hcc_params register after adding primary hcd. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Radim Krčmář authored
[ Upstream commit 05d8d346 ] Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(), we have already checked that the MSR bitmap address is valid (4k aligned and within physical limits). SDM doesn't specify what happens if the there is no memory mapped at the valid address, but Intel CPUs treat the situation as if the bitmap was configured to trap all MSRs. KVM already does that by returning false and a correct handling doesn't need the guest-trigerrable warning that was reported by syzkaller: (The warning was originally there to catch some possible bugs in nVMX.) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline] nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561 handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312 vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526 vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline] vcpu_run arch/x86/kvm/x86.c:7044 [inline] kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205 kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570 Reported-by:
Jim Mattson <jmattson@google.com> [Jim Mattson explained the bare metal behavior: "I believe this behavior would be documented in the chipset data sheet rather than the SDM, since the chipset returns all 1s for an unclaimed read."] Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit fd567653 ] The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Ilan peer authored
commit 57629915 upstream. The code was setting the capabilities byte to zero, after it was already properly set previously. Fix it. The bug was found while debugging hwsim mesh tests failures that happened since the commit mentioned below. Fixes: 76f43b4c ("mac80211: Remove invalid flag operations in mesh TSF synchronization") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Reviewed-by:
Masashi Honma <masashi.honma@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Richard Schütz <rschuetz@uni-koblenz.de> Cc: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by:
-
Chandan Rajendra authored
commit 9d5afec6 upstream. On a ppc64 machine, when mounting a fuzzed ext2 image (generated by fsfuzzer) the following call trace is seen, VFS: brelse: Trying to free free buffer WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40 .__brelse.part.6+0x20/0x40 (unreliable) .ext4_find_entry+0x384/0x4f0 .ext4_lookup+0x84/0x250 .lookup_slow+0xdc/0x230 .walk_component+0x268/0x400 .path_lookupat+0xec/0x2d0 .filename_lookup+0x9c/0x1d0 .vfs_statx+0x98/0x140 .SyS_newfstatat+0x48/0x80 system_call+0x58/0x6c This happens because the directory that ext4_find_entry() looks up has inode->i_size that is less than the block size of the filesystem. This causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not reading any of the directory file's blocks. This renders the entries in bh_use[] array to continue to have garbage data. buffer_uptodate() on bh_use[0] can then return a zero value upon which brelse() function is invoked. This commit fixes the bug by returning -ENOENT when the directory file has no associated blocks. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
-
