- 15 Jun, 2019 40 commits
-
-
Mika Westerberg authored
[ Upstream commit 9872760e ] The XDomain protocol messages may start as soon as Thunderbolt control channel is started. This means that if the other host starts sending ThunderboltIP packets early enough they will be passed to the network driver which then gets confused because its resume hook is not called yet. Fix this by unregistering the ThunderboltIP protocol handler when suspending and registering it back on resume. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wesley Sheng authored
[ Upstream commit 083c1b5e ] When running application tool switchtec-user's `firmware update` and `event wait` commands concurrently, sometimes the firmware update speed reduced significantly. It is because when the MRPC event happened after MRPC event occurrence check but before the event mask loop reaches its header register in event ISR, the MRPC event would be masked unintentionally. Since there's no chance to enable it again except for a module reload, all the following MRPC execution completion checks time out. Fix this bug by skipping the mask operation for MRPC event in event ISR, same as what we already do for LINK event. Fixes: 52eabba5 ("switchtec: Add IOCTLs to the Switchtec driver") Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Will Deacon authored
[ Upstream commit 3f54c447 ] Disabling the SMMU when probing from within a kdump kernel so that all incoming transactions are terminated can prevent the core of the crashed kernel from being transferred off the machine if all I/O devices are behind the SMMU. Instead, continue to probe the SMMU after it is disabled so that we can reinitialise it entirely and re-attach the DMA masters as they are reset. Since the kdump kernel may not have drivers for all of the active DMA masters, we suppress fault reporting to avoid spamming the console and swamping the IRQ threads. Reported-by: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com> Tested-by: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Farhan Ali authored
[ Upstream commit 41be3e26 ] vfio_dev_present() which is the condition to wait_event_interruptible_timeout(), will call vfio_group_get_device and try to acquire the mutex group->device_lock. wait_event_interruptible_timeout() will set the state of the current task to TASK_INTERRUPTIBLE, before doing the condition check. This means that we will try to acquire the mutex while already in a sleeping state. The scheduler warns us by giving the following warning: [ 4050.264464] ------------[ cut here ]------------ [ 4050.264508] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000b33c00e2>] prepare_to_wait_event+0x14a/0x188 [ 4050.264529] WARNING: CPU: 12 PID: 35924 at kernel/sched/core.c:6112 __might_sleep+0x76/0x90 .... 4050.264756] Call Trace: [ 4050.264765] ([<000000000017bbaa>] __might_sleep+0x72/0x90) [ 4050.264774] [<0000000000b97edc>] __mutex_lock+0x44/0x8c0 [ 4050.264782] [<0000000000b9878a>] mutex_lock_nested+0x32/0x40 [ 4050.264793] [<000003ff800d7abe>] vfio_group_get_device+0x36/0xa8 [vfio] [ 4050.264803] [<000003ff800d87c0>] vfio_del_group_dev+0x238/0x378 [vfio] [ 4050.264813] [<000003ff8015f67c>] mdev_remove+0x3c/0x68 [mdev] [ 4050.264825] [<00000000008e01b0>] device_release_driver_internal+0x168/0x268 [ 4050.264834] [<00000000008de692>] bus_remove_device+0x162/0x190 [ 4050.264843] [<00000000008daf42>] device_del+0x1e2/0x368 [ 4050.264851] [<00000000008db12c>] device_unregister+0x64/0x88 [ 4050.264862] [<000003ff8015ed84>] mdev_device_remove+0xec/0x130 [mdev] [ 4050.264872] [<000003ff8015f074>] remove_store+0x6c/0xa8 [mdev] [ 4050.264881] [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8 [ 4050.264890] [<00000000003c1530>] __vfs_write+0x38/0x1a8 [ 4050.264899] [<00000000003c187c>] vfs_write+0xb4/0x198 [ 4050.264908] [<00000000003c1af2>] ksys_write+0x5a/0xb0 [ 4050.264916] [<0000000000b9e270>] system_call+0xdc/0x2d8 [ 4050.264925] 4 locks held by sh/35924: [ 4050.264933] #0: 000000001ef90325 (sb_writers#4){.+.+}, at: vfs_write+0x9e/0x198 [ 4050.264948] #1: 000000005c1ab0b3 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cc/0x1f8 [ 4050.264963] #2: 0000000034831ab8 (kn->count#297){++++}, at: kernfs_remove_self+0x12e/0x150 [ 4050.264979] #3: 00000000e152484f (&dev->mutex){....}, at: device_release_driver_internal+0x5c/0x268 [ 4050.264993] Last Breaking-Event-Address: [ 4050.265002] [<000000000017bbaa>] __might_sleep+0x72/0x90 [ 4050.265010] irq event stamp: 7039 [ 4050.265020] hardirqs last enabled at (7047): [<00000000001cee7a>] console_unlock+0x6d2/0x740 [ 4050.265029] hardirqs last disabled at (7054): [<00000000001ce87e>] console_unlock+0xd6/0x740 [ 4050.265040] softirqs last enabled at (6416): [<0000000000b8fe26>] __udelay+0xb6/0x100 [ 4050.265049] softirqs last disabled at (6415): [<0000000000b8fe06>] __udelay+0x96/0x100 [ 4050.265057] ---[ end trace d04a07d39d99a9f9 ]--- Let's fix this as described in the article https://lwn.net/Articles/628628/. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> [remove now redundant vfio_dev_present()] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit 0ab88ca4 ] clang warns that 'contextlen' may be accessed without an initialization: fs/nfsd/nfs4xdr.c:2911:9: error: variable 'contextlen' is uninitialized when used here [-Werror,-Wuninitialized] contextlen); ^~~~~~~~~~ fs/nfsd/nfs4xdr.c:2424:16: note: initialize the variable 'contextlen' to silence this warning int contextlen; ^ = 0 Presumably this cannot happen, as FATTR4_WORD2_SECURITY_LABEL is set if CONFIG_NFSD_V4_SECURITY_LABEL is enabled. Adding another #ifdef like the other two in this function avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
J. Bruce Fields authored
[ Upstream commit 0b8f6262 ] A fuzzer recently triggered lockdep warnings about potential sb_writers deadlocks caused by fh_want_write(). Looks like we aren't careful to pair each fh_want_write() with an fh_drop_write(). It's not normally a problem since fh_put() will call fh_drop_write() for us. And was OK for NFSv3 where we'd do one operation that might call fh_want_write(), and then put the filehandle. But an NFSv4 protocol fuzzer can do weird things like call unlink twice in a compound, and then we get into trouble. I'm a little worried about this approach of just leaving everything to fh_put(). But I think there are probably a lot of fh_want_write()/fh_drop_write() imbalances so for now I think we need it to be more forgiving. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kirill Smelkov authored
[ Upstream commit 7640682e ] FUSE filesystem server and kernel client negotiate during initialization phase, what should be the maximum write size the client will ever issue. Correspondingly the filesystem server then queues sys_read calls to read requests with buffer capacity large enough to carry request header + that max_write bytes. A filesystem server is free to set its max_write in anywhere in the range between [1*page, fc->max_pages*page]. In particular go-fuse[2] sets max_write by default as 64K, wheres default fc->max_pages corresponds to 128K. Libfuse also allows users to configure max_write, but by default presets it to possible maximum. If max_write is < fc->max_pages*page, and in NOTIFY_RETRIEVE handler we allow to retrieve more than max_write bytes, corresponding prepared NOTIFY_REPLY will be thrown away by fuse_dev_do_read, because the filesystem server, in full correspondence with server/client contract, will be only queuing sys_read with ~max_write buffer capacity, and fuse_dev_do_read throws away requests that cannot fit into server request buffer. In turn the filesystem server could get stuck waiting indefinitely for NOTIFY_REPLY since NOTIFY_RETRIEVE handler returned OK which is understood by clients as that NOTIFY_REPLY was queued and will be sent back. Cap requested size to negotiate max_write to avoid the problem. This aligns with the way NOTIFY_RETRIEVE handler works, which already unconditionally caps requested retrieve size to fuse_conn->max_pages. This way it should not hurt NOTIFY_RETRIEVE semantic if we return less data than was originally requested. Please see [1] for context where the problem of stuck filesystem was hit for real, how the situation was traced and for more involving patch that did not make it into the tree. [1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2 [2] https://github.com/hanwen/go-fuseSigned-off-by: Kirill Smelkov <kirr@nexedi.com> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Jakob Unterwurzacher <jakobunt@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chen-Yu Tsai authored
[ Upstream commit da75b890 ] The device tree binding already lists compatible strings for these two SoCs. They don't have the defect as seen on the H3, and the size and register layout is the same as the A64. Furthermore, the driver does not include nvmem cell definitions. Add support for these two compatible strings, re-using the config for the A64. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jorge Ramirez-Ortiz authored
[ Upstream commit 2fe518fe ] When the bit_offset in the cell is zero, the pointer to the msb will not be properly initialized (ie, will still be pointing to the first byte in the buffer). This being the case, if there are bits to clear in the msb, those will be left untouched while the mask will incorrectly clear bit positions on the first byte. This commit also makes sure that any byte unused in the cell is cleared. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lu Baolu authored
[ Upstream commit a7755c3c ] Requesting page reqest irq under dmar_global_lock could cause potential lock race condition (caught by lockdep). [ 4.100055] ====================================================== [ 4.100063] WARNING: possible circular locking dependency detected [ 4.100072] 5.1.0-rc4+ #2169 Not tainted [ 4.100078] ------------------------------------------------------ [ 4.100086] swapper/0/1 is trying to acquire lock: [ 4.100094] 000000007dcbe3c3 (dmar_lock){+.+.}, at: dmar_alloc_hwirq+0x35/0x140 [ 4.100112] but task is already holding lock: [ 4.100120] 0000000060bbe946 (dmar_global_lock){++++}, at: intel_iommu_init+0x191/0x1438 [ 4.100136] which lock already depends on the new lock. [ 4.100146] the existing dependency chain (in reverse order) is: [ 4.100155] -> #2 (dmar_global_lock){++++}: [ 4.100169] down_read+0x44/0xa0 [ 4.100178] intel_irq_remapping_alloc+0xb2/0x7b0 [ 4.100186] mp_irqdomain_alloc+0x9e/0x2e0 [ 4.100195] __irq_domain_alloc_irqs+0x131/0x330 [ 4.100203] alloc_isa_irq_from_domain.isra.4+0x9a/0xd0 [ 4.100212] mp_map_pin_to_irq+0x244/0x310 [ 4.100221] setup_IO_APIC+0x757/0x7ed [ 4.100229] x86_late_time_init+0x17/0x1c [ 4.100238] start_kernel+0x425/0x4e3 [ 4.100247] secondary_startup_64+0xa4/0xb0 [ 4.100254] -> #1 (irq_domain_mutex){+.+.}: [ 4.100265] __mutex_lock+0x7f/0x9d0 [ 4.100273] __irq_domain_add+0x195/0x2b0 [ 4.100280] irq_domain_create_hierarchy+0x3d/0x40 [ 4.100289] msi_create_irq_domain+0x32/0x110 [ 4.100297] dmar_alloc_hwirq+0x111/0x140 [ 4.100305] dmar_set_interrupt.part.14+0x1a/0x70 [ 4.100314] enable_drhd_fault_handling+0x2c/0x6c [ 4.100323] apic_bsp_setup+0x75/0x7a [ 4.100330] x86_late_time_init+0x17/0x1c [ 4.100338] start_kernel+0x425/0x4e3 [ 4.100346] secondary_startup_64+0xa4/0xb0 [ 4.100352] -> #0 (dmar_lock){+.+.}: [ 4.100364] lock_acquire+0xb4/0x1c0 [ 4.100372] __mutex_lock+0x7f/0x9d0 [ 4.100379] dmar_alloc_hwirq+0x35/0x140 [ 4.100389] intel_svm_enable_prq+0x61/0x180 [ 4.100397] intel_iommu_init+0x1128/0x1438 [ 4.100406] pci_iommu_init+0x16/0x3f [ 4.100414] do_one_initcall+0x5d/0x2be [ 4.100422] kernel_init_freeable+0x1f0/0x27c [ 4.100431] kernel_init+0xa/0x110 [ 4.100438] ret_from_fork+0x3a/0x50 [ 4.100444] other info that might help us debug this: [ 4.100454] Chain exists of: dmar_lock --> irq_domain_mutex --> dmar_global_lock [ 4.100469] Possible unsafe locking scenario: [ 4.100476] CPU0 CPU1 [ 4.100483] ---- ---- [ 4.100488] lock(dmar_global_lock); [ 4.100495] lock(irq_domain_mutex); [ 4.100503] lock(dmar_global_lock); [ 4.100512] lock(dmar_lock); [ 4.100518] *** DEADLOCK *** Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Reported-by: Dave Jiang <dave.jiang@intel.com> Fixes: a222a7f0 ("iommu/vt-d: Implement page request handling") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Valentin Schneider authored
[ Upstream commit 7b3320e6 ] Commit 7ee7ef24 ("scsi: arm64: defconfig: enable configs for Hisilicon ufs") set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends on (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD) were left to being built as modules. Commit 1f4fa50d ("arm64: defconfig: Regenerate for v4.20") "fixed" that by reverting to 'CONFIG_SCSI_UFS_HISI=m'. Thing is, if the rootfs is stored in the on-board flash (which is the "canonical" way of doing things), we either need these drivers to be built-in, or we need to fiddle with an initramfs to access that flash and eventually load the modules installed over there. The former is the easiest, do that. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nathan Fontenot authored
[ Upstream commit b2d3b5ee ] When removing memory we need to remove the memory from the node it was added to instead of looking up the node it should be in in the device tree. During testing we have seen scenarios where the affinity for a LMB changes due to a partition migration or PRRN event. In these cases the node the LMB exists in may not match the node the device tree indicates it belongs in. This can lead to a system crash when trying to DLPAR remove the LMB after a migration or PRRN event. The current code looks up the node in the device tree to remove the LMB from, the crash occurs when we try to offline this node and it does not have any data, i.e. node_data[nid] == NULL. 36:mon> e cpu 0x36: Vector: 300 (Data Access) at [c0000001828b7810] pc: c00000000036d08c: try_offline_node+0x2c/0x1b0 lr: c0000000003a14ec: remove_memory+0xbc/0x110 sp: c0000001828b7a90 msr: 800000000280b033 dar: 9a28 dsisr: 40000000 current = 0xc0000006329c4c80 paca = 0xc000000007a55200 softe: 0 irq_happened: 0x01 pid = 76926, comm = kworker/u320:3 36:mon> t [link register ] c0000000003a14ec remove_memory+0xbc/0x110 [c0000001828b7a90] c00000000006a1cc arch_remove_memory+0x9c/0xd0 (unreliable) [c0000001828b7ad0] c0000000003a14e0 remove_memory+0xb0/0x110 [c0000001828b7b20] c0000000000c7db4 dlpar_remove_lmb+0x94/0x160 [c0000001828b7b60] c0000000000c8ef8 dlpar_memory+0x7e8/0xd10 [c0000001828b7bf0] c0000000000bf828 handle_dlpar_errorlog+0xf8/0x160 [c0000001828b7c60] c0000000000bf8cc pseries_hp_work_fn+0x3c/0xa0 [c0000001828b7c90] c000000000128cd8 process_one_work+0x298/0x5a0 [c0000001828b7d20] c000000000129068 worker_thread+0x88/0x620 [c0000001828b7dc0] c00000000013223c kthread+0x1ac/0x1c0 [c0000001828b7e30] c00000000000b45c ret_from_kernel_thread+0x5c/0x80 To resolve this we need to track the node a LMB belongs to when it is added to the system so we can remove it from that node instead of the node that the device tree indicates it should belong to. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit f495222e ] Currently the IRQ handler in HD-audio controller driver is registered before the chip initialization. That is, we have some window opened between the azx_acquire_irq() call and the CORB/RIRB setup. If an interrupt is triggered in this small window, the IRQ handler may access to the uninitialized RIRB buffer, which leads to a NULL dereference Oops. This is usually no big problem since most of Intel chips do register the IRQ via MSI, and we've already fixed the order of the IRQ enablement and the CORB/RIRB setup in the former commit b61749a8 ("sound: enable interrupt after dma buffer initialization"), hence the IRQ won't be triggered in that room. However, some platforms use a shared IRQ, and this may allow the IRQ trigger by another source. Another possibility is the kdump environment: a stale interrupt might be present in there, the IRQ handler can be falsely triggered as well. For covering this small race, let's move the azx_acquire_irq() call after hda_intel_init_chip() call. Although this is a bit radical change, it can cover more widely than checking the CORB/RIRB setup locally in the callee side. Reported-by: Liwei Song <liwei.song@windriver.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit 26a302af ] flow_offload_alloc() calls nf_route() to get a dst_entry. Internally, nf_route() calls ip_route_output_key() that allocates a dst_entry and holds it. So, a dst_entry should be released by dst_release() if nf_route() is successful. Otherwise, netns exit routine cannot be finished and the following message is printed: [ 257.490952] unregister_netdevice: waiting for lo to become free. Usage count = 1 Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit 33cc3c0c ] nf_flow_offload_ip_hook() and nf_flow_offload_ipv6_hook() do not check ttl value. So, ttl value overflow may occur. Fixes: 97add9f0 ("netfilter: flow table support for IPv4") Fixes: 09952107 ("netfilter: flow table support for IPv6") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Keith Busch authored
[ Upstream commit 9dc1a38e ] We do not restart a controller in a deleting state for timeout errors. When in this state, unblock potential request dispatchers with failed completions by shutting down the controller on timeout detection. Reported-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Keith Busch authored
[ Upstream commit c8e9e9b7 ] Just like IO queues, the admin queue also will not be restarted after a controller shutdown. Unquiesce this queue so that we do not block request dispatch on a permanently disabled controller. Reported-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kishon Vijay Abraham I authored
[ Upstream commit 6b733030 ] Certain platforms like K2G reguires the outbound ATU window to be aligned. The alignment size is already present in mem->page_size. Use the alignment size present in mem->page_size to configure an aligned ATU window. In order to raise an interrupt, CPU has to write to address offset from the start of the window unlike before where writes were always to the beginning of the ATU window. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kishon Vijay Abraham I authored
[ Upstream commit 8f220664 ] commit 834b9051 ("misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR") while adding test_reg_bar in order to map PCI_ENDPOINT_TEST regs to be mapped to any BAR failed to update test_reg_bar in pci_endpoint_test, resulting in test_reg_bar having invalid value when used outside probe. Fix it. Fixes: 834b9051 ("misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Greg Kurz authored
[ Upstream commit 2c85f2bd ] If vfio_pci_register_dev_region() fails then we should rollback previous changes, ie. unmap the ATSD registers. Fixes: 7f928917 ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lu Baolu authored
[ Upstream commit cf1ec453 ] The intel_iommu_gfx_mapped flag is exported by the Intel IOMMU driver to indicate whether an IOMMU is used for the graphic device. In a virtualized IOMMU environment (e.g. QEMU), an include-all IOMMU is used for graphic device. This flag is found to be clear even the IOMMU is used. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com> Fixes: c0771df8 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.") Suggested-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ming Lei authored
[ Upstream commit fbc2a15e ] With holding queue's kobject refcount, it is safe for driver to schedule requeue. However, blk_mq_kick_requeue_list() may be called after blk_sync_queue() is done because of concurrent requeue activities, then requeue work may not be completed when freeing queue, and kernel oops is triggered. So moving the cancel of requeue_work into blk_mq_release() for avoiding race between requeue and freeing queue. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Zapolskiy authored
[ Upstream commit a223770b ] CONFIG_WATCHDOG_PRETIMEOUT_GOV build symbol adds watchdog_pretimeout.o object to watchdog.o, the latter is compiled only if CONFIG_WATCHDOG_CORE is selected, so it rightfully makes sense to add it as a dependency. The change fixes the next compilation errors, if CONFIG_WATCHDOG_CORE=n and CONFIG_WATCHDOG_PRETIMEOUT_GOV=y are selected: drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_register': drivers/watchdog/pretimeout_noop.c:35: undefined reference to `watchdog_register_governor' drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_unregister': drivers/watchdog/pretimeout_noop.c:40: undefined reference to `watchdog_unregister_governor' drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_register': drivers/watchdog/pretimeout_panic.c:35: undefined reference to `watchdog_register_governor' drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_unregister': drivers/watchdog/pretimeout_panic.c:40: undefined reference to `watchdog_unregister_governor' Reported-by: Kuo, Hsuan-Chi <hckuo2@illinois.edu> Fixes: ff84136c ("watchdog: add watchdog pretimeout governor framework") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Georg Hofmann authored
[ Upstream commit b07e228e ] The documentated behavior is: if max_hw_heartbeat_ms is implemented, the minimum of the set_timeout argument and max_hw_heartbeat_ms should be used. This patch implements this behavior. Previously only the first 7bits were used and the input argument was returned. Signed-off-by: Georg Hofmann <georg@hofmannsweb.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit edbd82c5 ] Following splat gets triggered when nfnetlink monitor is running while xtables-nft selftests are running: net/netfilter/nf_tables_api.c:1272 suspicious rcu_dereference_check() usage! other info that might help us debug this: 1 lock held by xtables-nft-mul/27006: #0: 00000000e0f85be9 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x1a/0x50 Call Trace: nf_tables_fill_chain_info.isra.45+0x6cc/0x6e0 nf_tables_chain_notify+0xf8/0x1a0 nf_tables_commit+0x165c/0x1740 nf_tables_fill_chain_info() can be called both from dumps (rcu read locked) or from the transaction path if a userspace process subscribed to nftables notifications. In the 'table dump' case, rcu_access_pointer() cannot be used: We do not hold transaction mutex so the pointer can be NULLed right after the check. Just unconditionally fetch the value, then have the helper return immediately if its NULL. In the notification case we don't hold the rcu read lock, but updates are prevented due to transaction mutex. Use rcu_dereference_check() to make lockdep aware of this. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Serge Semin authored
[ Upstream commit 93fa5b28 ] There are situations when memory regions coming from dts may be too big for the platform physical address space. This especially concerns XPA-capable systems. Bootloader may determine more than 4GB memory available and pass it to the kernel over dts memory node, while kernel is built without XPA/64BIT support. In this case the region may either simply be truncated by add_memory_region() method or by u64->phys_addr_t type casting. But in worst case the method can even drop the memory region if it exceeds PHYS_ADDR_MAX size. So lets make sure the retrieved from dts memory regions are valid, and if some of them aren't, just manually truncate them with a warning printed out. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: Serge Semin <Sergey.Semin@t-platforms.ru> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jakub Jankowski authored
[ Upstream commit f5e85ce8 ] Since commit bc7d811a ("netfilter: nf_ct_h323: Convert CHECK_BOUND macro to function"), NAT traversal for H.323 doesn't work, failing to parse H323-UserInformation. nf_h323_error_boundary() compares contents of the bitstring, not the addresses, preventing valid H.323 packets from being conntrack'd. This looks like an oversight from when CHECK_BOUND macro was converted to a function. To fix it, stop dereferencing bs->cur and bs->end. Fixes: bc7d811a ("netfilter: nf_ct_h323: Convert CHECK_BOUND macro to function") Signed-off-by: Jakub Jankowski <shasta@toxcorp.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit 43c8f131 ] rhashtable_insert_fast() may return an error value when memory allocation fails, but flow_offload_add() does not check for errors. This patch just adds missing error checking. Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ludovic Barre authored
[ Upstream commit 8520ce1e ] The IRQ handler, mmci_irq(), loops until all status bits have been cleared. However, the status bit signaling busy in variant->busy_detect_flag, may be set even if busy detection isn't monitored for the current request. This may be the case for the CMD11 when switching the I/O voltage, which leads to that mmci_irq() busy loops in IRQ context. Fix this problem, by clearing the status bit for busy, before continuing to validate the condition for the loop. This is safe, because the busy status detection has already been taken care of by mmci_cmd_irq(). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Amir Goldstein authored
[ Upstream commit d9899030 ] Overlayfs "fake" path is used for stacked file operations on underlying files. Operations on files with "fake" path must not generate fsnotify events with path data, because those events have already been generated at overlayfs layer and because the reported event->fd for fanotify marks on underlying inode/filesystem will have the wrong path (the overlayfs path). Link: https://lore.kernel.org/linux-fsdevel/20190423065024.12695-1-jencce.kernel@gmail.com/Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Fixes: d1d04ef8 ("ovl: stack file ops") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andreas Schwab authored
[ Upstream commit 3c5a1b11 ] When the logo is currently drawn on a virtual console, and the console loglevel is reduced to quiet, logo_shown must be left alone, so that it the scrolling region on that virtual console is properly reset. Fixes: 10993504 ("fbcon: Silence fbcon logo on 'quiet' boots") Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Marko Myllynen <myllynen@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jisheng Zhang authored
[ Upstream commit dc69a3d5 ] To avoid a memory leak, free the page allocated for MSI IRQ in dw_pcie_free_msi(). Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jisheng Zhang authored
[ Upstream commit 9e2b5de5 ] If we ever did MSI-related initializations, we need to call dw_pcie_free_msi() in the error code path. Remove the IS_ENABLED(CONFIG_PCI_MSI) check for MSI init because pci_msi_enabled() already has a stub for !CONFIG_PCI_MSI. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maciej Żenczykowski authored
[ Upstream commit 689a5860 ] Memory: 509108K/542612K available (3835K kernel code, 919K rwdata, 1028K rodata, 129K init, 211K bss, 33504K reserved, 0K cma-reserved) NR_IRQS: 15 clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:458 clockevents_register_device+0x72/0x140 posix-timer cpumask == cpu_all_mask, using cpu_possible_mask instead Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-00048-ged79cc87 #4 Stack: 604ebda0 603c5370 604ebe20 6046fd17 00000000 6006fcbb 604ebdb0 603c53b5 604ebe10 6003bfc4 604ebdd0 9000001ca Call Trace: [<6006fcbb>] ? printk+0x0/0x94 [<60083160>] ? clockevents_register_device+0x72/0x140 [<6001f16e>] show_stack+0x13b/0x155 [<603c5370>] ? dump_stack_print_info+0xe2/0xeb [<6006fcbb>] ? printk+0x0/0x94 [<603c53b5>] dump_stack+0x2a/0x2c [<6003bfc4>] __warn+0x10e/0x13e [<60070320>] ? vprintk_func+0xc8/0xcf [<60030fd6>] ? block_signals+0x0/0x16 [<6006fcbb>] ? printk+0x0/0x94 [<6003c08b>] warn_slowpath_fmt+0x97/0x99 [<600311a1>] ? set_signals+0x0/0x3f [<6003bff4>] ? warn_slowpath_fmt+0x0/0x99 [<600842cb>] ? tick_oneshot_mode_active+0x44/0x4f [<60030fd6>] ? block_signals+0x0/0x16 [<6006fcbb>] ? printk+0x0/0x94 [<6007d2d5>] ? __clocksource_select+0x20/0x1b1 [<60030fd6>] ? block_signals+0x0/0x16 [<6006fcbb>] ? printk+0x0/0x94 [<60083160>] clockevents_register_device+0x72/0x140 [<60031192>] ? get_signals+0x0/0xf [<60030fd6>] ? block_signals+0x0/0x16 [<6006fcbb>] ? printk+0x0/0x94 [<60002eec>] um_timer_setup+0xc8/0xca [<60001b59>] start_kernel+0x47f/0x57e [<600035bc>] start_kernel_proc+0x49/0x4d [<6006c483>] ? kmsg_dump_register+0x82/0x8a [<6001de62>] new_thread_handler+0x81/0xb2 [<60003571>] ? kmsg_dumper_stdout_init+0x1a/0x1c [<60020c75>] uml_finishsetup+0x54/0x59 random: get_random_bytes called from init_oops_id+0x27/0x34 with crng_init=0 ---[ end trace 00173d0117a88acb ]--- Calibrating delay loop... 6941.90 BogoMIPS (lpj=34709504) Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: linux-um@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 35399f87 ] In configfs_register_group(), if create_default_group() failed, we forget to unlink the group. It will left a invalid item in the parent list, which may trigger the use-after-free issue seen below: BUG: KASAN: use-after-free in __list_add_valid+0xd4/0xe0 lib/list_debug.c:26 Read of size 8 at addr ffff8881ef61ae20 by task syz-executor.0/5996 CPU: 1 PID: 5996 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 __list_add_valid+0xd4/0xe0 lib/list_debug.c:26 __list_add include/linux/list.h:60 [inline] list_add_tail include/linux/list.h:93 [inline] link_obj+0xb0/0x190 fs/configfs/dir.c:759 link_group+0x1c/0x130 fs/configfs/dir.c:784 configfs_register_group+0x56/0x1e0 fs/configfs/dir.c:1751 configfs_register_default_group+0x72/0xc0 fs/configfs/dir.c:1834 ? 0xffffffffc1be0000 iio_sw_trigger_init+0x23/0x1000 [industrialio_sw_trigger] do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f494ecbcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00007f494ecbcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f494ecbd6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Allocated by task 5987: set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] configfs_register_default_group+0x4c/0xc0 fs/configfs/dir.c:1829 0xffffffffc1bd0023 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 5987: set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459 slab_free_hook mm/slub.c:1429 [inline] slab_free_freelist_hook mm/slub.c:1456 [inline] slab_free mm/slub.c:3003 [inline] kfree+0xe1/0x270 mm/slub.c:3955 configfs_register_default_group+0x9a/0xc0 fs/configfs/dir.c:1836 0xffffffffc1bd0023 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881ef61ae00 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 32 bytes inside of 192-byte region [ffff8881ef61ae00, ffff8881ef61aec0) The buggy address belongs to the page: page:ffffea0007bd8680 count:1 mapcount:0 mapping:ffff8881f6c03000 index:0xffff8881ef61a700 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0007ca4740 0000000500000005 ffff8881f6c03000 raw: ffff8881ef61a700 000000008010000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881ef61ad00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881ef61ad80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc >ffff8881ef61ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881ef61ae80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881ef61af00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 5cf6a51e ("configfs: allow dynamic group creation") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Sperbeck authored
[ Upstream commit 198790d9 ] In free_percpu() we sometimes call pcpu_schedule_balance_work() to queue a work item (which does a wakeup) while holding pcpu_lock. This creates an unnecessary lock dependency between pcpu_lock and the scheduler's pi_lock. There are other places where we call pcpu_schedule_balance_work() without hold pcpu_lock, and this case doesn't need to be different. Moving the call outside the lock prevents the following lockdep splat when running tools/testing/selftests/bpf/{test_maps,test_progs} in sequence with lockdep enabled: ====================================================== WARNING: possible circular locking dependency detected 5.1.0-dbg-DEV #1 Not tainted ------------------------------------------------------ kworker/23:255/18872 is trying to acquire lock: 000000000bc79290 (&(&pool->lock)->rlock){-.-.}, at: __queue_work+0xb2/0x520 but task is already holding lock: 00000000e3e7a6aa (pcpu_lock){..-.}, at: free_percpu+0x36/0x260 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (pcpu_lock){..-.}: lock_acquire+0x9e/0x180 _raw_spin_lock_irqsave+0x3a/0x50 pcpu_alloc+0xfa/0x780 __alloc_percpu_gfp+0x12/0x20 alloc_htab_elem+0x184/0x2b0 __htab_percpu_map_update_elem+0x252/0x290 bpf_percpu_hash_update+0x7c/0x130 __do_sys_bpf+0x1912/0x1be0 __x64_sys_bpf+0x1a/0x20 do_syscall_64+0x59/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #3 (&htab->buckets[i].lock){....}: lock_acquire+0x9e/0x180 _raw_spin_lock_irqsave+0x3a/0x50 htab_map_update_elem+0x1af/0x3a0 -> #2 (&rq->lock){-.-.}: lock_acquire+0x9e/0x180 _raw_spin_lock+0x2f/0x40 task_fork_fair+0x37/0x160 sched_fork+0x211/0x310 copy_process.part.43+0x7b1/0x2160 _do_fork+0xda/0x6b0 kernel_thread+0x29/0x30 rest_init+0x22/0x260 arch_call_rest_init+0xe/0x10 start_kernel+0x4fd/0x520 x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0x6f/0x72 secondary_startup_64+0xa4/0xb0 -> #1 (&p->pi_lock){-.-.}: lock_acquire+0x9e/0x180 _raw_spin_lock_irqsave+0x3a/0x50 try_to_wake_up+0x41/0x600 wake_up_process+0x15/0x20 create_worker+0x16b/0x1e0 workqueue_init+0x279/0x2ee kernel_init_freeable+0xf7/0x288 kernel_init+0xf/0x180 ret_from_fork+0x24/0x30 -> #0 (&(&pool->lock)->rlock){-.-.}: __lock_acquire+0x101f/0x12a0 lock_acquire+0x9e/0x180 _raw_spin_lock+0x2f/0x40 __queue_work+0xb2/0x520 queue_work_on+0x38/0x80 free_percpu+0x221/0x260 pcpu_freelist_destroy+0x11/0x20 stack_map_free+0x2a/0x40 bpf_map_free_deferred+0x3c/0x50 process_one_work+0x1f7/0x580 worker_thread+0x54/0x410 kthread+0x10f/0x150 ret_from_fork+0x24/0x30 other info that might help us debug this: Chain exists of: &(&pool->lock)->rlock --> &htab->buckets[i].lock --> pcpu_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcpu_lock); lock(&htab->buckets[i].lock); lock(pcpu_lock); lock(&(&pool->lock)->rlock); *** DEADLOCK *** 3 locks held by kworker/23:255/18872: #0: 00000000b36a6e16 ((wq_completion)events){+.+.}, at: process_one_work+0x17a/0x580 #1: 00000000dfd966f0 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x17a/0x580 #2: 00000000e3e7a6aa (pcpu_lock){..-.}, at: free_percpu+0x36/0x260 stack backtrace: CPU: 23 PID: 18872 Comm: kworker/23:255 Not tainted 5.1.0-dbg-DEV #1 Hardware name: ... Workqueue: events bpf_map_free_deferred Call Trace: dump_stack+0x67/0x95 print_circular_bug.isra.38+0x1c6/0x220 check_prev_add.constprop.50+0x9f6/0xd20 __lock_acquire+0x101f/0x12a0 lock_acquire+0x9e/0x180 _raw_spin_lock+0x2f/0x40 __queue_work+0xb2/0x520 queue_work_on+0x38/0x80 free_percpu+0x221/0x260 pcpu_freelist_destroy+0x11/0x20 stack_map_free+0x2a/0x40 bpf_map_free_deferred+0x3c/0x50 process_one_work+0x1f7/0x580 worker_thread+0x54/0x410 kthread+0x10f/0x150 ret_from_fork+0x24/0x30 Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eugen Hristev authored
[ Upstream commit 1e4e25c4 ] The subsystem will free the asd memory on notifier cleanup, if the asd is added to the notifier. However the memory is freed using kfree. Thus, we cannot allocate the asd using devm_* This can lead to crashes and problems. To test this issue, just return an error at probe, but cleanup the notifier beforehand. Fixes: 10626744 ("[media] atmel-isc: add the Image Sensor Controller code") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit b42b179b ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203221 - Overview When mounting the attached crafted image and running program, this error is reported. The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on. - Reproduces cc poc_07.c mkdir test mount -t f2fs tmp.img test cp a.out test cd test sudo ./a.out - Messages kernel BUG at fs/f2fs/node.c:1279! RIP: 0010:read_node_page+0xcf/0xf0 Call Trace: __get_node_page+0x6b/0x2f0 f2fs_iget+0x8f/0xdf0 f2fs_lookup+0x136/0x320 __lookup_slow+0x92/0x140 lookup_slow+0x30/0x50 walk_component+0x1c1/0x350 path_lookupat+0x62/0x200 filename_lookup+0xb3/0x1a0 do_fchmodat+0x3e/0xa0 __x64_sys_chmod+0x12/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 On below paths, we can have opportunity to readahead inode page - gc_node_segment -> f2fs_ra_node_page - gc_data_segment -> f2fs_ra_node_page - f2fs_fill_dentries -> f2fs_ra_node_page Unlike synchronized read, on readahead path, we can set page uptodate before verifying page's checksum, then read_node_page() will trigger kernel panic once it encounters a uptodated page w/ incorrect checksum. So considering readahead scenario, we have to do checksum each time when loading inode page even if it is uptodated. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 45a74688 ] With below mkfs and mount option, generic/339 of fstest will report that scratch image becomes corrupted. MKFS_OPTIONS -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f /dev/zram1 MOUNT_OPTIONS -- -o acl,user_xattr -o discard,noinline_xattr /dev/zram1 /mnt/scratch_f2fs [ASSERT] (f2fs_check_dirent_position:1315) --> Wrong position of dirent pino:1970, name: (...) level:8, dir_level:0, pgofs:951, correct range:[900, 901] In old kernel, inline data and directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled, then new kernel tries to retrieve that space for non-inline xattr inode, but for inline dentry, its layout size should be fixed, so we just keep that reserved space. But the problem here is that, after inline dentry conversion, inline dentry layout no longer exists, if we still reserve inline xattr space, after dents updates, there will be a hole in inline xattr space, which can break hierarchy hash directory structure. This patch fixes this issue by retrieving inline xattr space after inline dentry conversion. Fixes: 6afc662e ("f2fs: support flexible inline xattr size") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 793ab1c8 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203211 - Overview When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating. The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on. - Reproduces mkdir test mount -t f2fs tmp.img test cd test touch t - Messages [ 58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT ... (repeating) During GC, if segment type stored in SSA and SIT is inconsistent, we just skip migrating current segment directly, since we need to know the exact type to decide the migration function we use. So in foreground GC, we will easily run into a infinite loop as we may select the same victim segment which has inconsistent type due to greedy policy. In order to end up this, we choose to shutdown filesystem. For backgrond GC, we need to do that as well, so that we can avoid latter potential infinite looped foreground GC. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-