- 11 Aug, 2020 5 commits
-
-
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1861284 When the build of wireguard modules is disabled, its modules should be ignored, just like when zfs is disabled. Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Andy Whitcroft authored
BugLink: https://bugs.launchpad.net/bugs/1861284 Add support for building, signing, and shipping the wireguard.ko from the wireguard-dkms package. Drop this into the linux-modules package. Signed-off-by:
-
Andy Whitcroft authored
BugLink: https://bugs.launchpad.net/bugs/1861284 Add new dkms-build scripting which prepares a kernel headers tree and then builds specified DKMS packages against those headers. The resulting .kos are then incorporated into the specified package, including signing them into this kernels module signing key. This allows them to be loaded in a secure-boot environment. Squashes the following commits from bionic: UBUNTU: update dkms package versions UBUNTU: [Config] wireguard -- enable for all architectures UBUNTU: [Packaging]: ignore wireguard modules when wireguard is disabled UBUNTU: [Packaging] wireguard -- add support for building signed .ko dkms-build: apt-cache policy elides username:password information UBUNTU: [Packaging] file-downloader not handling positive failures correctly UBUNTU: temporarily drop Built-Using data UBUNTU: [packaging] handle downloads from the librarian better UBUNTU: [Packaging] autoreconstruct -- manage executable debian files UBUNTU: [Packaging] Fix config file assembly UBUNTU: [Packaging] dkms -- dkms-build quieten wget verbiage UBUNTU: [Packaging] dkms -- try launchpad librarian for pool downloads UBUNTU: [Packaging] dkms-build -- backport latest version from disco UBUNTU: [Packaging] dkms-build -- add support for unversioned overrides UBUNTU: [Packaging] dkms-build: do not redownload files on subsequent passes UBUNTU: [Packaging] dkms-build -- support building against packages in PPAs UBUNTU: [Packaging] dkms -- switch to a consistent build prefix length and strip UBUNTU: [Packaging] dkms -- add per package post-process step UBUNTU: [Packaging] dkms -- dkms package build packaging support Signed-off-by:
-
Andy Whitcroft authored
BugLink: https://bugs.launchpad.net/bugs/1861284 We generally mitigate executables within the debian directory but it would be much simpler if we extended executable bit management into debian too. Drop the exclusion there. Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1890796 In commit ed17b8d3 ("xfrm: fix a warning in xfrm_policy_insert_list"), it would take 'priority' to make a policy unique, and allow duplicated policies with different 'priority' to be added, which is not expected by userland, as Tobias reported in strongswan. To fix this duplicated policies issue, and also fix the issue in commit ed17b8d3 ("xfrm: fix a warning in xfrm_policy_insert_list"), when doing add/del/get/update on user interfaces, this patch is to change to look up a policy with both mark and mask by doing: mark.v == pol->mark.v && mark.m == pol->mark.m and leave the check: (mark & pol->mark.m) == pol->mark.v for tx/rx path only. As the userland expects an exact mark and mask match to manage policies. v1->v2: - make xfrm_policy_mark_match inline and fix the changelog as Tobias suggested. Fixes: 295fae56 ("xfrm: Allow user space manipulation of SPD mark") Fixes: ed17b8d3 ("xfrm: fix a warning in xfrm_policy_insert_list") Reported-by:
Tobias Brunner <tobias@strongswan.org> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> (backported from commit 4f47e8ab) [smb: work around missing if_id parameter and __xfrm_policy_bysel_ctx] Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
- 09 Aug, 2020 35 commits
-
-
Khalid Elmously authored
Signed-off-by:Khalid Elmously <khalid.elmously@canonical.com>
-
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1890670 Properties: no-test-build Signed-off-by:
-
Kamal Mostafa authored
BugLink: https://bugs.launchpad.net/bugs/1889928 Ignore: yes Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1889928Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 80526491 upstream. Fix to check kprobe blacklist address correctly with relocated address by adjusting debuginfo address. Since the address in the debuginfo is same as objdump, it is different from relocated kernel address with KASLR. Thus, 'perf probe' always misses to catch the blacklisted addresses. Without this patch, 'perf probe' can not detect the blacklist addresses on a KASLR enabled kernel. # perf probe kprobe_dispatcher Failed to write event: Invalid argument Error: Failed to add events. # With this patch, it correctly shows the error message. # perf probe kprobe_dispatcher kprobe_dispatcher is blacklisted function, skip it. Probe point 'kprobe_dispatcher' not found. Error: Failed to add events. # Fixes: 9aaf5a5f ("perf probe: Check kprobes blacklist when adding new events") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158763966411.30755.5882376357738273695.stgit@devnote2Signed-off-by:
-
Arnaldo Carvalho de Melo authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 6810158d upstream. We were using a local buffer with an arbitrary size, that would have to get increased to avoid truncation as warned by gcc 8: util/annotate.c: In function 'symbol__disassemble': util/annotate.c:1488:4: error: '%s' directive output may be truncated writing up to 4095 bytes into a region of size between 3966 and 8086 [-Werror=format-truncation=] "%s %s%s --start-address=0x%016" PRIx64 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ util/annotate.c:1498:20: symfs_filename, symfs_filename); ~~~~~~~~~~~~~~ util/annotate.c:1490:50: note: format string is defined here " -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand", ^~ In file included from /usr/include/stdio.h:861, from util/color.h:5, from util/sort.h:8, from util/annotate.c:14: /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 116 or more bytes (assuming 8331) into a destination of size 8192 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ So switch to asprintf, that will make sure enough space is available. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qagoy2dmbjpc9gdnaj0r3mml@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 77f18153 upstream. [Add an additional sprintf replacement in tools/perf/builtin-script.c] With gcc 8 we get new set of snprintf() warnings that breaks the compilation, one example: tests/mem.c: In function ‘check’: tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \ up to 99 bytes into a region of size 89 [-Werror=format-truncation=] snprintf(failure, sizeof failure, "unexpected %s", out); The gcc docs says: To avoid the warning either use a bigger buffer or handle the function's return value which indicates whether or not its output has been truncated. Given that all these warnings are harmless, because the code either properly fails due to uncomplete file path or we don't care for truncated output at all, I'm changing all those snprintf() calls to scnprintf(), which actually 'checks' for the snprint return value so the gcc stays silent. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.orgSigned-off-by:
-
Changbin Du authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 0ada120c upstream. libbfd has changed the bfd_section_* macros to inline functions bfd_section_<field> since 2019-09-18. See below two commits: o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html This fix make perf able to build with both old and new libbfd. Signed-off-by:
Changbin Du <changbin.du@gmail.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.comSigned-off-by:
-
Sergey Senozhatsky authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit dfbc3c6c upstream. [ Change applied file from tools/lib/subcmd/pager.c to tools/perf/util/pager.c ] Use a separate fd set for select()-s exception fds param to fix the following gcc warning: pager.c:36:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict] select(1, &in, NULL, &in, NULL); ^~~ ~~~ Link: http://lkml.kernel.org/r/20180101105626.7168-1-sergey.senozhatsky@gmail.comSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Sandeen authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 2c4306f7 upstream. If xfs_bmap_extents_to_btree fails in a mode where we call xfs_iroot_realloc(-1) to de-allocate the root, set the format back to extents. Otherwise we can assume we can dereference ifp->if_broot based on the XFS_DINODE_FMT_BTREE format, and crash. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199423Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Peng Fan authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 74edd08a upstream. When executing the following command, we met kernel dump. dmesg -c > /dev/null; cd /sys; for i in `ls /sys/kernel/debug/regmap/* -d`; do echo "Checking regmap in $i"; cat $i/registers; done && grep -ri "0x02d0" *; It is because the count value is too big, and kmalloc fails. So add an upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Fangrui Song authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit ca9b31f6 upstream. When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if $(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit, GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to /usr/bin/ and Clang as of 11 will search for both $(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle. GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle, $(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice, $(prefix)aarch64-linux-gnu/$needle rarely contains executables. To better model how GCC's -B/--prefix takes in effect in practice, newer Clang (since https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90) only searches for $(prefix)$needle. Currently it will find /usr/bin/as instead of /usr/bin/aarch64-linux-gnu-as. Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE)) (/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the appropriate cross compiling GNU as (when -no-integrated-as is in effect). Cc: stable@vger.kernel.org Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Fangrui Song <maskray@google.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1099Reviewed-by:
Masahiro Yamada <masahiroy@kernel.org> [nc: Adjust context, CLANG_FLAGS does not exist in 4.4] Signed-off-by:
-
Xie He authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 8fdcabea ] This driver is not working because of problems of its receiving code. This patch fixes it to make it work. When the driver receives an LAPB frame, it should first pass the frame to the LAPB module to process. After processing, the LAPB module passes the data (the packet) back to the driver, the driver should then add a one-byte pseudo header and pass the data to upper layers. The changes to the "x25_asy_bump" function and the "x25_asy_data_indication" function are to correctly implement this procedure. Also, the "x25_asy_unesc" function ignores any frame that is shorter than 3 bytes. However the shortest frames are 2-byte long. So we need to change it to allow 2-byte frames to pass. Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Reviewed-by:
Martin Schiller <ms@dev.tdt.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 46ef5b89 ] KASAN report null-ptr-deref error when register_netdev() failed: KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7] CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12 Call Trace: ip6gre_init_net+0x4ab/0x580 ? ip6gre_tunnel_uninit+0x3f0/0x3f0 ops_init+0xa8/0x3c0 setup_net+0x2de/0x7e0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? ops_init+0x3c0/0x3c0 ? kasan_unpoison_shadow+0x33/0x40 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 copy_net_ns+0x27d/0x530 create_new_namespaces+0x382/0xa30 unshare_nsproxy_namespaces+0xa1/0x1d0 ksys_unshare+0x39c/0x780 ? walk_process_tree+0x2a0/0x2a0 ? trace_hardirqs_on+0x4a/0x1b0 ? _raw_spin_unlock_irq+0x1f/0x30 ? syscall_trace_enter+0x1a7/0x330 ? do_syscall_64+0x1c/0xa0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x56/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving 'ign->fb_tunnel_dev' to local variable ndev. Fixes: dafabb65 ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David Howells authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 639f181f ] rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read. Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read as this particular error doesn't get stored in ->sk_err by the networking core. Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive errors (there's no way for it to report which call, if any, the error was caused by). Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Yuchung Cheng authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 76be93fc ] Previously TLP may send multiple probes of new data in one flight. This happens when the sender is cwnd limited. After the initial TLP containing new data is sent, the sender receives another ACK that acks partial inflight. It may re-arm another TLP timer to send more, if no further ACK returns before the next TLP timeout (PTO) expires. The sender may send in theory a large amount of TLP until send queue is depleted. This only happens if the sender sees such irregular uncommon ACK pattern. But it is generally undesirable behavior during congestion especially. The original TLP design restrict only one TLP probe per inflight as published in "Reducing Web Latency: the Virtue of Gentle Aggression", SIGCOMM 2013. This patch changes TLP to send at most one probe per inflight. Note that if the sender is app-limited, TLP retransmits old data and did not have this issue. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 17ad73e9 ] We recently added some bounds checking in ax25_connect() and ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because they were no longer required. Unfortunately, I believe they are required to prevent integer overflows so I have added them back. Fixes: 8885bb06 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()") Fixes: 2f2a7ffa ("AX.25: Fix out-of-bounds read in ax25_connect()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Miaohe Lin authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit b0a42277 ] We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is checked. Fixes: b2bf1e26 ("[UDP]: Clean up for IS_UDPLITE macro") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Xiongfeng Wang authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 9bb5fbea ] When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout 0root@syzkaller:~# Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Peilin Ye authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 8885bb06 ] Checks on `addr_len` and `usax->sax25_ndigis` are insufficient. ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7 or 8. Fix it. It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)` Signed-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
-
Peilin Ye authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 2f2a7ffa ] Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient. ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis` equals to 7 or 8. Fix it. This issue has been reported as a KMSAN uninit-value bug, because in such a case, ax25_connect() reaches into the uninitialized portion of the `struct sockaddr_storage` statically allocated in __sys_connect(). It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)`. Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66Signed-off-by:
-
Mark O'Donovan authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 92f53e2f upstream. This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251Signed-off-by:
Mark O'Donovan <shiftee@posteo.net> Reported-by:
Roman Mamedov <rm@romanrm.net> Tested-by:
Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.netSigned-off-by:
-
Qiujun Huang authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 2bbcaaee upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Signed-off-by:
-
John David Anglin authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit be6577af upstream. Stalls are quite frequent with recent kernels. I enabled CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803] CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3 Hardware name: 9000/800/rp3440 IAOQ[0]: d_alloc_parallel+0x384/0x688 IAOQ[1]: d_alloc_parallel+0x388/0x688 RP(r2): d_alloc_parallel+0x134/0x688 Backtrace: [<000000004036974c>] __lookup_slow+0xa4/0x200 [<0000000040369fc8>] walk_component+0x288/0x458 [<000000004036a9a0>] path_lookupat+0x88/0x198 [<000000004036e748>] filename_lookup+0xa0/0x168 [<000000004036e95c>] user_path_at_empty+0x64/0x80 [<000000004035d93c>] vfs_statx+0x104/0x158 [<000000004035dfcc>] __do_sys_lstat64+0x44/0x80 [<000000004035e5a0>] sys_lstat64+0x20/0x38 [<0000000040180054>] syscall_exit+0x0/0x14 The code was stuck in this loop in d_alloc_parallel: 4037d414: 0e 00 10 dc ldd 0(r16),ret0 4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384> 4037d41c: 08 00 02 40 nop This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in d_alloc_parallel: static inline void bit_spin_lock(int bitnum, unsigned long *addr) { /* * Assuming the lock is uncontended, this never enters * the body of the outer loop. If it is contended, then * within the inner loop a non-atomic test is used to * busywait with less bus contention for a good time to * attempt to acquire the lock bit. */ preempt_disable(); #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK) while (unlikely(test_and_set_bit_lock(bitnum, addr))) { preempt_enable(); do { cpu_relax(); } while (test_bit(bitnum, addr)); preempt_disable(); } #endif __acquire(bitlock); } After consideration, I realized that we must be losing bit unlocks. Then, I noticed that we missed defining atomic64_set_release(). Adding this define fixes the stalls in bit operations. Signed-off-by:
Dave Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Hugh Dickins authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 8d22a935 upstream. It was hard to keep a test running, moving tasks between memcgs with move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s refcount is discovered to be 0 (supposedly impossible), so it is then forced to REFCOUNT_SATURATED, and after thousands of warnings in quick succession, the test is at last put out of misery by being OOM killed. This is because of the way moved_swap accounting was saved up until the task move gets completed in __mem_cgroup_clear_mc(), deferred from when mem_cgroup_move_swap_account() actually exchanged old and new ids. Concurrent activity can free up swap quicker than the task is scanned, bringing id refcount down 0 (which should only be possible when offlining). Just skip that optimization: do that part of the accounting immediately. Fixes: 615d66c3 ("mm: memcontrol: fix memcg id ref counter on swap charge move") Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvilsSigned-off-by:
-
Serge Semin authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 551e553f upstream. Commit 7b668c06 ("serial: 8250: Fix max baud limit in generic 8250 port") fixed limits of a baud rate setting for a generic 8250 port. In other words since that commit the baud rate has been permitted to be within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely normal for a standard 8250 UART port. But there are custom 8250 ports, which provide extended baud rate limits. In particular the Mediatek 8250 port can work with baud rates up to "uartclk" speed. Normally that and any other peculiarity is supposed to be handled in a custom set_termios() callback implemented in the vendor-specific 8250-port glue-driver. Currently that is how it's done for the most of the vendor-specific 8250 ports, but for some reason for Mediatek a solution has been spread out to both the glue-driver and to the generic 8250-port code. Due to that a bug has been introduced, which permitted the extended baud rate limit for all even for standard 8250-ports. The bug has been fixed by the commit 7b668c06 ("serial: 8250: Fix max baud limit in generic 8250 port") by narrowing the baud rates limit back down to the normal bounds. Unfortunately by doing so we also broke the Mediatek-specific extended bauds feature. A fix of the problem described above is twofold. First since we can't get back the extended baud rate limits feature to the generic set_termios() function and that method supports only a standard baud rates range, the requested baud rate must be locally stored before calling it and then restored back to the new termios structure after the generic set_termios() finished its magic business. By doing so we still use the serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers, while the extended baud rate setting procedure will be performed later in the custom Mediatek-specific set_termios() callback. Second since a true baud rate is now fully calculated in the custom set_termios() method we need to locally update the port timeout by calling the uart_update_timeout() function. After the fixes described above are implemented in the 8250_mtk.c driver, the Mediatek 8250-port should get back to normally working with extended baud rates. Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com Fixes: 7b668c06 ("serial: 8250: Fix max baud limit in generic 8250 port") Reported-by:
Daniel Winkler <danielwinkler@google.com> Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: stable <stable@vger.kernel.org> Tested-by:
Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Yang Yingliang authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit f4c23a14 upstream. I got null-ptr-deref in serial8250_start_tx(): [ 78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 78.123778] Mem abort info: [ 78.126560] ESR = 0x86000007 [ 78.129603] EC = 0x21: IABT (current EL), IL = 32 bits [ 78.134891] SET = 0, FnV = 0 [ 78.137933] EA = 0, S1PTW = 0 [ 78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600 [ 78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000 [ 78.160029] Internal error: Oops: 86000007 [#1] SMP [ 78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd [ 78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48 [ 78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020 [ 78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 78.228435] pc : 0x0 [ 78.230618] lr : serial8250_start_tx+0x160/0x260 [ 78.235215] sp : ffff800062eefb80 [ 78.238517] x29: ffff800062eefb80 x28: 0000000000000fff [ 78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000 [ 78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000 [ 78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002 [ 78.259679] x21: 0000000000000001 x20: 0000000000000000 [ 78.264969] x19: ffffa688827eecc8 x18: 0000000000000000 [ 78.270259] x17: 0000000000000000 x16: 0000000000000000 [ 78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6 [ 78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539 [ 78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0 [ 78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88 [ 78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000 [ 78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8 [ 78.307292] x3 : 0000000000000000 x2 : 0000000000000002 [ 78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8 [ 78.317873] Call trace: [ 78.320312] 0x0 [ 78.322147] __uart_start.isra.9+0x64/0x78 [ 78.326229] uart_start+0xb8/0x1c8 [ 78.329620] uart_flush_chars+0x24/0x30 [ 78.333442] n_tty_receive_buf_common+0x7b0/0xc30 [ 78.338128] n_tty_receive_buf+0x44/0x2c8 [ 78.342122] tty_ioctl+0x348/0x11f8 [ 78.345599] ksys_ioctl+0xd8/0xf8 [ 78.348903] __arm64_sys_ioctl+0x2c/0xc8 [ 78.352812] el0_svc_common.constprop.2+0x88/0x1b0 [ 78.357583] do_el0_svc+0x44/0xd0 [ 78.360887] el0_sync_handler+0x14c/0x1d0 [ 78.364880] el0_sync+0x140/0x180 [ 78.368185] Code: bad PC value SERIAL_PORT_DFNS is not defined on each arch, if it's not defined, serial8250_set_defaults() won't be called in serial8250_isa_init_ports(), so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref. Fix this problem by calling serial8250_set_defaults() after init uart port. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.comSigned-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 926234f1 upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 1e15687e ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: <stable@vger.kernel.org> #3.17+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.ukSigned-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit fc846e9d upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this, adjusting the checks for invalid channels so that enabled channel bits that would have been lost by shifting are also checked for validity. Only channels 0 to 15 are valid. Fixes: a8c66b68 ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: <stable@vger.kernel.org> #4.0+: ef75e14a: staging: comedi: verify array index is correct before using it Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit f07804ec upstream. `ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions for the "interrupt" subdevice. When `data[0]` is `INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When `data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising and falling edge detection for the digital trigger, using a base channel number (or shift amount) in `data[3]`, a rising edge bitmask in `data[4]` and falling edge bitmask in `data[5]`. If the base channel number (shift amount) is greater than or equal to the number of channels (24) of the digital input subdevice, there are no changes to the rising and falling edges, so the mask of channels to be changed can be set to 0, otherwise the mask of channels to be changed, and the rising and falling edge bitmasks are shifted by the base channel number before calling `ni6527_set_edge_detection()` to change the appropriate registers. Unfortunately, the code is comparing the base channel (shift amount) to the interrupt subdevice's number of channels (1) instead of the digital input subdevice's number of channels (24). Fix it by comparing to 32 because all shift amounts for an `unsigned int` must be less than that and everything from bit 24 upwards is ignored by `ni6527_set_edge_detection()` anyway. Fixes: 110f9e68 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 0bd0db42 upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce62 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> #3.8+ Signed-off-by:
-
Rustam Kovhaev authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit faaff976 upstream. As syzkaller detected, wlan-ng driver does not do sanity check of endpoints in prism2sta_probe_usb(), add check for xfer direction and type Reported-and-tested-by: syzbot+c2a1fa67c02faa0de723@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=c2a1fa67c02faa0de723Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722161052.999754-1-rkovhaev@gmail.comSigned-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1889928 commit 0e670518 upstream. This reverts commit 9ffad926. Upon additional testing with older servers, it was found that the original commit introduced a regression when using the old SMB1 dialect and rsyncing over an existing file. The patch will need to be respun to address this, likely including a larger refactoring of the SMB1 and SMB3 rename code paths to make it less confusing and also to address some additional rename error cases that SMB3 may be able to workaround. Signed-off-by:
Steve French <stfrench@microsoft.com> Reported-by:
Patrick Fernie <patrick.fernie@gmail.com> CC: Stable <stable@vger.kernel.org> Acked-by:
Ronnie Sahlberg <lsahlber@redhat.com> Acked-by:
Pavel Shilovsky <pshilov@microsoft.com> Acked-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 81e96851 ] The clang integrated assembler requires the 'cmp' instruction to have a length prefix here: arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^ Make this a 32-bit comparison, which it was clearly meant to be. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1889928 [ Upstream commit 5afc7855 ] Rather than open-code test_tsk_thread_flag() at each callsite, simply replace the couple of offenders with calls to test_tsk_thread_flag() directly. Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
