In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
   after(ack_seq, tp->snd_wl1)

If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".

The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.

This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).

This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Link: https://www.spinics.net/lists/netdev/msg692430.htmlAcked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate,
after extended from 'u32' to 'unsigned long', takes unintentionally
hiked value whenever assigned from an 'int' value with MSB=1, due to
binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes
0xFFFFFFFF80000000.

Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return
~0U unexpectedly. It may also result in increased pacing rate.

Fix by explicitly casting the 'int' value to 'unsigned int' before
assigning it to sk_max_pacing_rate, for zero extension to happen.

Fixes: 76a9ebe8 ("net: extend sk_pacing_rate to unsigned long")
Signed-off-by: Ji Li <jli@akamai.com>
Signed-off-by: Ke Li <keli@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Update debugging in IPVS tcp protocol handler to make it easier
   to understand, from longguang.yue

2) Update TCP tracker to deal with keepalive packet after
   re-registration, from Franceso Ruggeri.

3) Missing IP6SKB_FRAGMENTED from netfilter fragment reassembly,
   from Georg Kohmann.

4) Fix bogus packet drop in ebtables nat extensions, from
   Thimothee Cocault.

5) Fix typo in flowtable documentation.

6) Reset skb timestamp in nft_fwd_netdev.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2020-10-22

1) Fix enforcing NULL check in verifier for new helper return types of
   RET_PTR_TO_{BTF_ID,MEM_OR_BTF_ID}_OR_NULL, from Martin KaFai Lau.

2) Fix bpf_redirect_neigh() helper API before it becomes frozen by adding
   nexthop information as argument, from Toke Høiland-Jørgensen.

3) Guard & fix compilation of bpf_tail_call_static() when __bpf__ arch is
   not defined by compiler or clang too old, from Daniel Borkmann.

4) Remove misplaced break after return in attach_type_to_prog_type(), from
   Tom Rix.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to 7980d2ea ("ipvs: clear skb->tstamp in forwarding path").
fq qdisc requires tstamp to be cleared in forwarding path.

Fixes: 8203e2d8 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

After mac address change request completes successfully, the new mac
address need to be saved to adapter->mac_addr as well as
netdev->dev_addr. Otherwise, adapter->mac_addr still holds old
data.

Fixes: 62740e97 ("net/ibmvnic: Update MAC address settings after adapter reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201020223919.46106-1-ljp@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a
consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no
longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6
will stay disabled and selftests will fail.

We also need CONFIG_IPV6 to be built-in. For more details, please see
commit 0ed37ac5 ("mptcp: depends on IPV6 but not as a module").

Note that 'make kselftest-merge' will take all 'config' files found in
'tools/testsing/selftests'. Because some of them already set
CONFIG_IPV6=y, MPTCP selftests were still passing. But they will fail if
MPTCP selftests are launched manually after having executed this command
to prepare the kernel config:

  ./scripts/kconfig/merge_config.sh -m .config \
      ./tools/testing/selftests/net/mptcp/config

Fixes: 010b430d ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20201021155549.933731-1-matthieu.baerts@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 3618ad2a.

When control vq is not negotiated, that commit causes a crash:

[   72.229171] kernel BUG at drivers/net/virtio_net.c:1667!
[   72.230266] invalid opcode: 0000 [#1] PREEMPT SMP
[   72.231172] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc8-02934-g3618ad2a #1
[   72.231172] EIP: virtnet_send_command+0x120/0x140
[   72.231172] Code: 00 0f 94 c0 8b 7d f0 65 33 3d 14 00 00 00 75 1c 8d 65 f4 5b 5e 5f 5d c3 66 90 be 01 00 00 00 e9 6e ff ff ff 8d b6 00
+00 00 00 <0f> 0b e8 d9 bb 82 00 eb 17 8d b4 26 00 00 00 00 8d b4 26 00 00 00
[   72.231172] EAX: 0000000d EBX: f72895c0 ECX: 00000017 EDX: 00000011
[   72.231172] ESI: f7197800 EDI: ed69bd00 EBP: ed69bcf4 ESP: ed69bc98
[   72.231172] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246
[   72.231172] CR0: 80050033 CR2: 00000000 CR3: 02c84000 CR4: 000406f0
[   72.231172] Call Trace:
[   72.231172]  ? __virt_addr_valid+0x45/0x60
[   72.231172]  ? ___cache_free+0x51f/0x760
[   72.231172]  ? kobject_uevent_env+0xf4/0x560
[   72.231172]  virtnet_set_guest_offloads+0x4d/0x80
[   72.231172]  virtnet_set_features+0x85/0x120
[   72.231172]  ? virtnet_set_guest_offloads+0x80/0x80
[   72.231172]  __netdev_update_features+0x27a/0x8e0
[   72.231172]  ? kobject_uevent+0xa/0x20
[   72.231172]  ? netdev_register_kobject+0x12c/0x160
[   72.231172]  register_netdevice+0x4fe/0x740
[   72.231172]  register_netdev+0x1c/0x40
[   72.231172]  virtnet_probe+0x728/0xb60
[   72.231172]  ? _raw_spin_unlock+0x1d/0x40
[   72.231172]  ? virtio_vdpa_get_status+0x1c/0x20
[   72.231172]  virtio_dev_probe+0x1c6/0x271
[   72.231172]  really_probe+0x195/0x2e0
[   72.231172]  driver_probe_device+0x26/0x60
[   72.231172]  device_driver_attach+0x49/0x60
[   72.231172]  __driver_attach+0x46/0xc0
[   72.231172]  ? device_driver_attach+0x60/0x60
[   72.231172]  bus_add_driver+0x197/0x1c0
[   72.231172]  driver_register+0x66/0xc0
[   72.231172]  register_virtio_driver+0x1b/0x40
[   72.231172]  virtio_net_driver_init+0x61/0x86
[   72.231172]  ? veth_init+0x14/0x14
[   72.231172]  do_one_initcall+0x76/0x2e4
[   72.231172]  ? rdinit_setup+0x2a/0x2a
[   72.231172]  do_initcalls+0xb2/0xd5
[   72.231172]  kernel_init_freeable+0x14f/0x179
[   72.231172]  ? rest_init+0x100/0x100
[   72.231172]  kernel_init+0xd/0xe0
[   72.231172]  ret_from_fork+0x1c/0x30
[   72.231172] Modules linked in:
[   72.269563] ---[ end trace a6ebc4afea0e6cb1 ]---

The reason is that virtnet_set_features now calls virtnet_set_guest_offloads
unconditionally, it used to only call it when there is something
to configure.

If device does not have a control vq, everything breaks.

Revert the original commit for now.

Cc: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Fixes: 3618ad2a ("virtio-net: ethtool configurable RXCSUM")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201021142944.13615-1-mst@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

"ip addr show" command execute error when we have a physical
network card with a large number of VFs

The return value of if_nlmsg_size() in rtnl_calcit() will exceed
range of u16 data type when any network cards has a larger number of
VFs. rtnl_vfinfo_size() will significant increase needed dump size when
the value of num_vfs is larger.

Eventually we get a wrong value of min_ifinfo_dump_size because of overflow
which decides the memory size needed by netlink dump and netlink_dump()
will return -EMSGSIZE because of not enough memory was allocated.

So fix it by promoting  min_dump_alloc data type to u32 to
avoid whole netlink message size overflow and it's also align
with the data type of struct netlink_callback{}.min_dump_alloc
which is assigned by return value of rtnl_calcit()
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver depends on mmio regmap API but doesn't select the appropriate
Kconfig option. This fixes it.

Fixes: 8c7bd5a4 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20201020073515.22769-1-brgl@bgdev.plSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver calls ether_setup to set up the network device.
The ether_setup function would add the IFF_TX_SKB_SHARING flag to the
device. This flag indicates that it is safe to transmit shared skbs to
the device.

However, this is not true. This driver may pad the frame (in eth_tx)
before transmission, so the skb may be modified.

Fixes: 550fd08c ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared")
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201020063420.187497-1-xie.he.0141@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The hdlc_rcv function is used as hdlc_packet_type.func to process any
skb received in the kernel with skb->protocol == htons(ETH_P_HDLC).
The purpose of this function is to provide second-stage processing for
skbs not assigned a "real" L3 skb->protocol value in the first stage.

This function assumes the device from which the skb is received is an
HDLC device (a device created by this module). It assumes that
netdev_priv(dev) returns a pointer to "struct hdlc_device".

However, it is possible that some driver in the kernel (not necessarily
in our control) submits a received skb with skb->protocol ==
htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would
still be received by hdlc_rcv. This will cause problems.

hdlc_rcv should be able to recognize and drop invalid skbs. It should
first make sure "dev" is actually an HDLC device, before starting its
processing. This patch adds this check to hdlc_rcv.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201020013152.89259-1-xie.he.0141@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Yaniv reported a compilation error after pulling latest libbpf:

  [...]
  ../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error:
  unknown register name 'r0' in asm
                     : "r0", "r1", "r2", "r3", "r4", "r5");
  [...]

The issue got triggered given Yaniv was compiling tracing programs with native
target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor
CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR
to BPF object file. Given that clang was expecting x86 inline asm and not BPF
one the error complained that these regs don't exist on the former.

Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid
to use. BPF tracing programs on more modern kernels use BPF target anyway and
thus the bpf_tail_call_static() function will be available for them. BPF inline
asm is supported since clang 7 (clang <= 6 otherwise throws same above error),
and __bpf_unreachable() since clang 8, therefore include the latter condition
in order to prevent compilation errors for older clang versions. Given even an
old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did
not bother to special case the __bpf_unreachable() inside bpf_tail_call_static()
further.

Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they
still have the old hacky way to even compile networking progs with native instead
of BPF target so bpf_tail_call_static() won't be defined there anymore.

Fixes: 0e9f6841 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs")
Reported-by: Yaniv Agman <yanivagman@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Tested-by: Yaniv Agman <yanivagman@gmail.com>
Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net

This updates the test_tc_neigh prog in selftests to use the new syntax of
bpf_redirect_neigh(). To exercise the helper both with and without the
optional parameter, add an additional test_tc_neigh_fib test program, which
does a bpf_fib_lookup() followed by a call to bpf_redirect_neigh() instead
of looking up the ifindex in a map.

Update the test_tc_redirect.sh script to run both versions of the test,
and while we're add it, fix it to work on systems that have a consolidated
dual-stack 'ping' binary instead of separate ping/ping6 versions.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/160322915724.32199.17530068594636950447.stgit@toke.dk

Based on the discussion in [0], update the bpf_redirect_neigh() helper to
accept an optional parameter specifying the nexthop information. This makes
it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without
incurring a duplicate FIB lookup - since the FIB lookup helper will return
the nexthop information even if no neighbour is present, this can simply
be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns
BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen.

  [0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk

Like TCP, MPTCP cannot be compiled as a module. Obviously, MPTCP IPv6'
support also depends on CONFIG_IPV6. But not all functions from IPv6
code are exported.

To simplify the code and reduce modifications outside MPTCP, it was
decided from the beginning to support MPTCP with IPv6 only if
CONFIG_IPV6 was built inlined. That's also why CONFIG_MPTCP_IPV6 was
created. More modifications are needed to support CONFIG_IPV6=m.

Even if it was not explicit, until recently, we were forcing CONFIG_IPV6
to be built-in because we had "select IPV6" in Kconfig. Now that we have
"depends on IPV6", we have to explicitly set "IPV6=y" to force
CONFIG_IPV6 not to be built as a module.

In other words, we can now only have CONFIG_MPTCP_IPV6=y if
CONFIG_IPV6=y.

Note that the new dependency might hide the fact IPv6 is not supported
in MPTCP even if we have CONFIG_IPV6=m. But selecting IPV6 like we did
before was forcing it to be built-in while it was maybe not what the
user wants.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 010b430d ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201021105154.628257-1-matthieu.baerts@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

efx_probe_filters() has not been called yet when EF100 calls into
 efx_mcdi_filter_table_probe(), for which it wants to take the
 filter_sem.

Fixes: a9dc3d56 ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Link: https://lore.kernel.org/r/24fad43e-887d-051e-25e3-506f23f63abf@solarflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mpls_iptunnel is used only for mpls encapsuation, and if encaplusated
packet is larger than MTU we need mpls_gso for segmentation.
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: David Ahern <dsahern@gmail.com>
Link: https://lore.kernel.org/r/20201020114333.26866-1-ovov@yandex-team.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

the following command

 # tc action add action tunnel_key \
 > set src_ip 2001:db8::1 dst_ip 2001:db8::2 id 10 erspan_opts 1:6789:0:0

generates the following splat:

 BUG: KASAN: slab-out-of-bounds in tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key]
 Write of size 4 at addr ffff88813f5f1cc8 by task tc/873

 CPU: 2 PID: 873 Comm: tc Not tainted 5.9.0+ #282
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 Call Trace:
  dump_stack+0x99/0xcb
  print_address_description.constprop.7+0x1e/0x230
  kasan_report.cold.13+0x37/0x7c
  tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key]
  tunnel_key_init+0x160c/0x1f40 [act_tunnel_key]
  tcf_action_init_1+0x5b5/0x850
  tcf_action_init+0x15d/0x370
  tcf_action_add+0xd9/0x2f0
  tc_ctl_action+0x29b/0x3a0
  rtnetlink_rcv_msg+0x341/0x8d0
  netlink_rcv_skb+0x120/0x380
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x719/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5ba/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f872a96b338
 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
 RSP: 002b:00007ffffe367518 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000000005f8f5aed RCX: 00007f872a96b338
 RDX: 0000000000000000 RSI: 00007ffffe367580 RDI: 0000000000000003
 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000001c
 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000686760 R14: 0000000000000601 R15: 0000000000000000

 Allocated by task 873:
  kasan_save_stack+0x19/0x40
  __kasan_kmalloc.constprop.7+0xc1/0xd0
  __kmalloc+0x151/0x310
  metadata_dst_alloc+0x20/0x40
  tunnel_key_init+0xfff/0x1f40 [act_tunnel_key]
  tcf_action_init_1+0x5b5/0x850
  tcf_action_init+0x15d/0x370
  tcf_action_add+0xd9/0x2f0
  tc_ctl_action+0x29b/0x3a0
  rtnetlink_rcv_msg+0x341/0x8d0
  netlink_rcv_skb+0x120/0x380
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x719/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5ba/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

 The buggy address belongs to the object at ffff88813f5f1c00
  which belongs to the cache kmalloc-256 of size 256
 The buggy address is located 200 bytes inside of
  256-byte region [ffff88813f5f1c00, ffff88813f5f1d00)
 The buggy address belongs to the page:
 page:0000000011b48a19 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13f5f0
 head:0000000011b48a19 order:1 compound_mapcount:0
 flags: 0x17ffffc0010200(slab|head)
 raw: 0017ffffc0010200 0000000000000000 0000000d00000001 ffff888107c43400
 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff88813f5f1b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff88813f5f1c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >ffff88813f5f1c80: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
                                               ^
  ffff88813f5f1d00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff88813f5f1d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

using IPv6 tunnels, act_tunnel_key allocates a fixed amount of memory for
the tunnel metadata, but then it expects additional bytes to store tunnel
specific metadata with tunnel_key_copy_opts().

Fix the arguments of __ipv6_tun_set_dst(), so that 'md_size' contains the
size previously computed by tunnel_key_get_opts_len(), like it's done for
IPv4 tunnels.

Fixes: 0ed5269f ("net/sched: add tunnel option support to act_tunnel_key")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/36ebe969f6d13ff59912d6464a4356fe6f103766.1603231100.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We need to jump to the "err_out_locked" label when
tcf_gate_get_entries() fails. Otherwise, tc_setup_flow_action() exits
with ->tcfa_lock still held.

Fixes: d29bdd69 ("net: schedule: add action gate offloading")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/12f60e385584c52c22863701c0185e40ab08a7a7.1603207948.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Don't populate the const array rate_table on the stack but instead it
static. Makes the object code smaller by 46 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  29812	   3824	    192	  33828	   8424	drivers/net/dsa/bcm_sf2.o

After:
   text	   data	    bss	    dec	    hex	filename
  29670	   3920	    192	  33782	   83f6	drivers/net/dsa/bcm_sf2.o

(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201020165029.56383-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MPTCP_IPV6 selects IPV6, thus enabling an optional feature the user may
not want to enable.  Fix this by making MPTCP_IPV6 depend on IPV6, like
is done for all other IPv6 features.

Fixes: f870fa0b ("mptcp: Add MPTCP socket stubs")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201020073839.29226-1-geert@linux-m68k.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix build errors when TLS=m, TLS_TOE=y, and CRYPTO_DEV_CHELSIO_TLS=y.

Having (tristate) CRYPTO_DEV_CHELSIO_TLS depend on (bool) TLS_TOE
is not strong enough to prevent the bad combination of TLS=m and
CRYPTO_DEV_CHELSIO_TLS=y, so add a dependency on TLS to prevent the
problematic kconfig combination.

Fixes these build errors:

hppa-linux-ld: drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.o: in function `chtls_free_uld':
 drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c:165: undefined reference to `tls_toe_unregister_device'
hppa-linux-ld: drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.o: in function `chtls_register_dev':
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c:204: undefined reference to `tls_toe_register_device'

Fixes: 53b4414a ("net/tls: allow compiling TLS TOE out")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201019181059.22634-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vinay Kumar Yadav says:

====================
chelsio/chtls: Fix inline tls bugs

This series of patches fix following bugs in chelsio inline tls driver.

Patch1: Fix incorrect socket lock.
Patch2: correct netdevice for vlan interface.
Patch3: Fix panic when server is listening on ipv6.
Patch4: Fix panic when listen on multiadapter.
Patch5: correct function return and return type.
Patch6: Fix writing freed memory.
====================

Link: https://lore.kernel.org/r/20201019115025.24233-1-vinay.yadav@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When chtls_sock *csk is freed, same memory can be allocated
to different csk in chtls_sock_create().
csk->cdev = NULL; statement might ends up modifying wrong
csk, eventually causing kernel panic.
removing (csk->cdev = NULL) statement as it is not required.

Fixes: 3a0a9783 ("crypto/chtls: Fix chtls crash in connection cleanup")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

csk_mem_free() should return true if send buffer is available,
false otherwise.

Fixes: 3b8305f5 ("crypto: chtls - wait for memory sendmsg, sendpage")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add the logic to compare net_device returned by ip_dev_find()
with the net_device list in cdev->ports[] array and return
net_device if matched else NULL.

Fixes: 6abde0b2 ("crypto/chtls: IPv6 support for inline TLS")
Signed-off-by: Venkatesh Ellapu <venkatesh.e@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Netdev is filled in egress_dev when connection is established,
If connection is closed before establishment, then egress_dev
is NULL, Fix it using ip_dev_find() rather then extracting from
egress_dev.

Fixes: 6abde0b2 ("crypto/chtls: IPv6 support for inline TLS")
Signed-off-by: Venkatesh Ellapu <venkatesh.e@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check if netdevice is a vlan interface and find real vlan netdevice.

Fixes: cc35c88a ("crypto : chtls - CPL handler definition")
Signed-off-by: Venkatesh Ellapu <venkatesh.e@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In chtls_sendpage() socket lock is released but not acquired,
fix it by taking lock.

Fixes: 36bedb3f ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by
the netlink client prior to accessing them.This prevents potential
unhandled NULL pointer dereference exceptions which can be triggered
by malicious user-mode programs, if they omit one or both of these
attributes.

Similar to commit a0323b97 ("nfc: Ensure presence of required attributes in the activate_target handler").

Fixes: 9674da87 ("NFC: Add firmware upload netlink command")
Signed-off-by: Defang Bo <bodefang@126.com>
Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MPTCP_KUNIT_TESTS selects MPTCP, thus enabling an optional feature the
user may not want to enable.  Fix this by making the test depend on
MPTCP instead.

Fixes: a00a5822 ("mptcp: move crypto test to KUNIT")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201019113240.11516-1-geert@linux-m68k.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Geliang Tang says:

====================
init ahmac and port of mptcp_options_received

This patchset deals with initializations of mptcp_options_received's two
fields, ahmac and port.
====================

Link: https://lore.kernel.org/r/cover.1603102503.git.geliangtang@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move mptcp_options_received's port initialization from
mptcp_parse_option to mptcp_get_options, put it together with
the other fields initializations of mptcp_options_received.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Initialize mptcp_options_received's ahmac to zero, otherwise it
will be a random number when receiving ADD_ADDR suboption with echo-flag=1.

Fixes: 3df523ab ("mptcp: Add ADD_ADDR handling")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Need to use the udp header type and not tcp.

Fixes: 9c26ba9b ("net/sched: act_ct: Instantiate flow table entry actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20201019090244.3015186-1-roid@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit bbc4d71d ("net: phy: realtek: fix rtl8211e rx/tx
delay config"), the Realtek PHY driver will override any TX/RX delay
set by hardware straps if the phy-mode device property does not match.

This is causing problems on SynQuacer based platforms (the only SoC
that incorporates the netsec hardware), since many were built with
this Realtek PHY, and shipped with firmware that defines the phy-mode
as 'rgmii', even though the PHY is configured for TX and RX delay using
pull-ups.

From the driver's perspective, we should not make any assumptions in
the general case that the PHY hardware does not require any initial
configuration. However, the situation is slightly different for ACPI
boot, since it implies rich firmware with AML abstractions to handle
hardware details that are not exposed to the OS. So in the ACPI case,
it is reasonable to assume that the PHY comes up in the right mode,
regardless of whether the mode is set by straps, by boot time firmware
or by AML executed by the ACPI interpreter.

So let's ignore the 'phy-mode' device property when probing the netsec
driver in ACPI mode, and hardcode the mode to PHY_INTERFACE_MODE_NA,
which should work with any PHY provided that it is configured by the
time the driver attaches to it. While at it, document that omitting
the mode is permitted for DT probing as well, by setting the phy-mode
DT property to the empty string.

Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201018163625.2392-1-ardb@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Follow-up on ebb034b1 ("bpf: Migrate from patchwork.ozlabs.org
to patchwork.kernel.org.") in order to fix up the patchwork URL (Q)
in the MAINTAINERS file for BPF subsystem.

While at it, also add the official website (W) entry.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/f73ae01c7e6f9cf0a3890f2ca988a8e69190c50b.1603223852.git.daniel@iogearbox.net

A break is not needed if it is preceded by a return
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019191500.9264-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A break is not needed if it is preceded by a return or goto
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019172607.31622-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>